Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 30 of 30
Full-Text Articles in Engineering
Electrical Stimulation Using Conductive Polymer Polypyrrole Counters Reduced Neurite Outgrowth Of Primary Prefrontal Cortical Neurons From Nrg1-Ko And Disc1-Li Mice, Qingsheng Zhang, Dorna Esrafilzadeh, Jeremy Micah Crook, Robert M. I Kapsa, Elise M. Stewart, Eva Tomaskovic-Crook, Gordon G. Wallace, Xu-Feng Huang
Electrical Stimulation Using Conductive Polymer Polypyrrole Counters Reduced Neurite Outgrowth Of Primary Prefrontal Cortical Neurons From Nrg1-Ko And Disc1-Li Mice, Qingsheng Zhang, Dorna Esrafilzadeh, Jeremy Micah Crook, Robert M. I Kapsa, Elise M. Stewart, Eva Tomaskovic-Crook, Gordon G. Wallace, Xu-Feng Huang
Australian Institute for Innovative Materials - Papers
Deficits in neurite outgrowth, possibly involving dysregulation of risk genes neuregulin-1 (NRG1) and disrupted in schizophrenia 1 (DISC1) have been implicated in psychiatric disorders including schizophrenia. Electrical stimulation using conductive polymers has been shown to stimulate neurite outgrowth of differentiating human neural stem cells. This study investigated the use of the electroactive conductive polymer polypyrrole (Ppy) to counter impaired neurite outgrowth of primary pre-frontal cortical (PFC) neurons from NRG1-knock out (NRG1-KO) and DISC1-locus impairment (DISC1-LI) mice. Whereas NRG1-KO and DISC1-LI exhibited reduced neurite length and number of neurite branches compared to wild-type controls, this was not apparent for cultures on …
Toward Biodegradable Mg-Air Bioelectric Batteries Composed Of Silk Fibroin-Polypyrrole Film, Xiaoteng Jia, Caiyun Wang, Chen Zhao, Yu Ge, Gordon G. Wallace
Toward Biodegradable Mg-Air Bioelectric Batteries Composed Of Silk Fibroin-Polypyrrole Film, Xiaoteng Jia, Caiyun Wang, Chen Zhao, Yu Ge, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
Biodegradable active implantable devices can be used to diagnose and/or treat disease and eventually disappear without surgical removal. If an "external" energy source is required for effective operation then a biocompatible and biodegradable battery would be ideal. In this study, a partially biodegradable Mg-air bioelectric battery (biobattery) is demonstrated using a silk fibroin-polypyrrole (SF-PPy) film cathode coupled with bioresorbable Mg alloy anode in phosphate buffered saline (PBS) electrolyte. PPy is chemically coated onto one side of the silk substrate. SF-PPy film shows a conductivity of ≈1.1 S cm−1 and a mild catalytic activity toward oxygen reduction. It degrades in a …
Conductive And Protein Resistant Polypyrrole Films For Dexamethasone Delivery, Binbin Zhang, Paul J. Molino, Alexander R. Harris, Zhilian Yue, Simon E. Moulton, Gordon G. Wallace
Conductive And Protein Resistant Polypyrrole Films For Dexamethasone Delivery, Binbin Zhang, Paul J. Molino, Alexander R. Harris, Zhilian Yue, Simon E. Moulton, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
The development of inherently conducting polymers as controllable/programmable drug delivery systems has attracted significant interest in medical bionics, and the interfacial properties of the polymers, in particular, protein adsorption characteristics, is integral to the stability of the overall performance. Herein we report a hybrid conducting system based on polypyrrole doped with an anti-inflammatory prodrug, dexamethasone phosphate (DexP), upon which post-surface modification was conducted to render the polymer more biostable. We firstly investigated the influence of the current density and DexP concentration on the physiochemical properties and surface characteristics of the resulting polymer films. Films were then surface modified with thiolated …
Reduced Graphene Oxide And Polypyrrole/Reduced Graphene Oxide Composite Coated Stretchable Fabric Electrodes For Supercapacitor Application, Chen Zhao, Kewei Shu, Caiyun Wang, Sanjeev Gambhir, Gordon G. Wallace
Reduced Graphene Oxide And Polypyrrole/Reduced Graphene Oxide Composite Coated Stretchable Fabric Electrodes For Supercapacitor Application, Chen Zhao, Kewei Shu, Caiyun Wang, Sanjeev Gambhir, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
The advent of self-powered functional garments has given rise to a demand for stretchable energy storage devices that are amendable to integration into textile structures. The electromaterials (anode, cathode and separator) are expected to sustain a deformation of 3% to 55% associated with body movement. Here, we report a stretchable fabric supercapacitor electrode using commonly available nylon lycra fabric as the substrate and graphene oxide (GO) as a dyestuff. It was prepared via a facile dyeing approach followed by a mild chemical reduction. This reduced graphene oxide (rGO) coated fabric electrode retains conductivity at an applied strain of up to …
A Facile Approach For Fabrication Of Mechanically Strong Graphene/Polypyrrole Films With Large Areal Capacitance For Supercapacitor Applications, Yu Ge, Caiyun Wang, Kewei Shu, Chen Zhao, Xiaoteng Jia, Sanjeev Gambhir, Gordon G. Wallace
A Facile Approach For Fabrication Of Mechanically Strong Graphene/Polypyrrole Films With Large Areal Capacitance For Supercapacitor Applications, Yu Ge, Caiyun Wang, Kewei Shu, Chen Zhao, Xiaoteng Jia, Sanjeev Gambhir, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
Substantial progress has been made in free-standing flexible graphene-based films for flexible supercapacitors. However, there are limited reports on the areal capacitance of these electrodes, which is an important parameter for practical applications, especially in miniaturized electronic devices. Herein we report the facile fabrication of robust flexible graphene/polypyrrole nanoparticle films. PPy NPs act as the "spacer" between graphene layers creating hierarchical structures. This free-standing film shows excellent mechanical properties with a fracture strength of 16.89 MPa and Young's modulus of 11.77 MPa. The resulting film electrode delivers a large areal specific capacitance of 216 mF cm−2, which is higher or …
Electrical Stimulation Using Conductive Polymer Polypyrrole Promotes Differentiation Of Human Neural Stem Cells: A Biocompatible Platform For Translational Neural Tissue Engineering, Elise Stewart, Nao R. Kobayashi, Michael J. Higgins, Anita Quigley, Sina S. Jamali, Simon Moulton, Robert M. I Kapsa, Gordon G. Wallace, Jeremy M. Crook
Electrical Stimulation Using Conductive Polymer Polypyrrole Promotes Differentiation Of Human Neural Stem Cells: A Biocompatible Platform For Translational Neural Tissue Engineering, Elise Stewart, Nao R. Kobayashi, Michael J. Higgins, Anita Quigley, Sina S. Jamali, Simon Moulton, Robert M. I Kapsa, Gordon G. Wallace, Jeremy M. Crook
Australian Institute for Innovative Materials - Papers
Conductive polymers (CPs) are organic materials that hold great promise for biomedicine. Potential applications include in vitro or implantable electrodes for excitable cell recording and stimulation, and conductive scaffolds for cell support and tissue engineering. Here we demonstrate the utility of electroactive CP Polypyrrole (PPy) containing the anionic dopant dodecylbenzenesulfonate (DBS) to differentiate novel clinically relevant human neural stem cells (hNSCs). Electrical stimulation of PPy(DBS) induced hNSCs to predominantly β-III Tubulin (Tuj1) expressing neurons, with lower induction of glial fibrillary acidic protein (GFAP) expressing glial cells. In addition, stimulated cultures comprised nodes or clusters of neurons with longer neurites and …
Split-Half-Tubular Polypyrrole@Sulfur@Polypyrrole Composite With A Novel Three-Layer-3d Structure As Cathode For Lithium/Sulfur Batteries, Xin Liang, Mingang Zhang, Mohammad Kaiser, Xuanwen Gao, Konstantin Konstantinov, Richard Tandiono, Zhaoxiang Wang, Hua-Kun Liu, S X. Dou, Jiazhao Wang
Split-Half-Tubular Polypyrrole@Sulfur@Polypyrrole Composite With A Novel Three-Layer-3d Structure As Cathode For Lithium/Sulfur Batteries, Xin Liang, Mingang Zhang, Mohammad Kaiser, Xuanwen Gao, Konstantin Konstantinov, Richard Tandiono, Zhaoxiang Wang, Hua-Kun Liu, S X. Dou, Jiazhao Wang
Australian Institute for Innovative Materials - Papers
Polypyrrole@Sulfur@Polypyrrole composite with a novel three-layer-3D-structure, which consists of an external polypyrrole coating layer, an intermediate sulfur filling layer, and an internal polypyrrole split-half-tube conducting matrix layer, has been synthesized by the oxidative chemical polymerization method and chemical precipitation method in this article. Due to this unique three-layer-structure, the discharge specific capacity of Polypyrrole@Sulfur@Polypyrrole composite cathode retained at 554mAh g-1 after 50 cycles, which represents 68.8% retention of the initial discharge specific capacity. In comparison, the Sulfur@Polypyrrole composite cathode, with the same components as Polypyrrole@Sulfur@Polypyrrole composite, but without the three-layer-structure, has the discharge specific capacity of 370mAh g-1 after 50 …
Novel Germanium/Polypyrrole Composite For High Power Lithium-Ion Batteries, Xuanwen Gao, Wenbin Luo, Chao Zhong, David Wexler, Shulei Chou, Hua-Kun Liu, Zhicong Shi, Guohua Chen, Kiyoshi Ozawa, Jiazhao Wang
Novel Germanium/Polypyrrole Composite For High Power Lithium-Ion Batteries, Xuanwen Gao, Wenbin Luo, Chao Zhong, David Wexler, Shulei Chou, Hua-Kun Liu, Zhicong Shi, Guohua Chen, Kiyoshi Ozawa, Jiazhao Wang
Australian Institute for Innovative Materials - Papers
Nano-Germanium/polypyrrole composite has been synthesized by chemical reduction method in aqueous solution. The Ge nanoparticles were directly coated on the surface of the polypyrrole. The morphology and structural properties of samples were determined by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Thermogravimetric analysis was carried out to determine the polypyrrole content. The electrochemical properties of the samples have been investigated and their suitability as anode materials for the lithium-ion battery was examined. The discharge capacity of the Ge nanoparticles calculated in the Ge-polypyrrole composite is 1014 mAh g-1 after 50 cycles at 0.2 C rate, which is …
Optimization Of The Sequential Polymerization Synthesis Method For Polypyrrole Films, Danial Sangian, Wen Zheng, Geoffrey M. Spinks
Optimization Of The Sequential Polymerization Synthesis Method For Polypyrrole Films, Danial Sangian, Wen Zheng, Geoffrey M. Spinks
Australian Institute for Innovative Materials - Papers
Polypyrrole (PPy) is widely used as an electroactive material and is most often synthesized using electrochemical polymerization. Recently, a new electropolymerization method [1] was introduced that involved preparing the PPy as a sequential series of electrodeposited layers with solvent washing in between each deposited layer. This method enabled high quality PPy free-standing films to be prepared in a relatively short time. The purpose of the present study was to investigate the effect of the polymerization current density on the mechanical and electrical properties of the sequentially polymerized (SEP) PPy films. It was found that a low current density (0.1 mA/cm2) …
Mechanically Strong High Performance Layered Polypyrrole Nano Fibre/Graphene Film For Flexible Solid State Supercapacitor, Sha Li, Chen Zhao, Kewei Shu, Caiyun Wang, Zaiping Guo, Gordon G. Wallace, Hua-Kun Liu
Mechanically Strong High Performance Layered Polypyrrole Nano Fibre/Graphene Film For Flexible Solid State Supercapacitor, Sha Li, Chen Zhao, Kewei Shu, Caiyun Wang, Zaiping Guo, Gordon G. Wallace, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
Paper like flexible electrode becomes one of the most important research objects recently in request of the fast expanding market of portable electronics. Flexible solid state supercapacitors are shortlisted as one of the most promising energy devices to power electronics with medium to high power density requirements. In this work, we developed a simple but effective way to produce a mechanically strong and electrochemically active RGO/polypyrrole (PPy) fibre paper. A well-bedded microstructure was created with interlaced polypyrrole fibres evenly distributed between the graphene layers. Such microstructure can create enormous amount of pores and therefore provides larger interfaces for charge carrier …
A Novel Codoping Approach For Enhancing The Performance Of Polypyrrole Cathode In A Bioelectric Battery, Yang Yang, Caiyun Wang, Chunming Zhang, Dan Wang, Dannong He, Gordon G. Wallace
A Novel Codoping Approach For Enhancing The Performance Of Polypyrrole Cathode In A Bioelectric Battery, Yang Yang, Caiyun Wang, Chunming Zhang, Dan Wang, Dannong He, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
A conducting polymer (CP) based bioelectric battery provides a promising alternative to commercial lithium batteries to drive biomedical devices. However, the low power density limits practical application. Here, we synthesize a polypyrrole (PPy)/anthraquinone sulfonate (AQS)/reduced graphene oxide (r-GO) composite via a facile electrochemical route, and use this as a novel cathode material for bioelectric batteries. The presence of r-GO significantly enhanced the electrochemical properties of PPy and led to greatly improved cell performance compared to that of PPy/AQS. The resultant PPy/AQS/r-GO composite delivered a maximum power density of 6240.5 mW m(-2), 14.2 times higher than that of PPy/p-toluenesulfonate (pTS) as …
One-Step Synthesis Of Graphene/Polypyrrole Nanofiber Composites As Cathode Material For A Biocompatible Zinc/Polymer Battery, Sha Li, Kewei Shu, Chen Zhao, Caiyun Wang, Zaiping Guo, Gordon G. Wallace, Hua-Kun Liu
One-Step Synthesis Of Graphene/Polypyrrole Nanofiber Composites As Cathode Material For A Biocompatible Zinc/Polymer Battery, Sha Li, Kewei Shu, Chen Zhao, Caiyun Wang, Zaiping Guo, Gordon G. Wallace, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
The significance of developing implantable, biocompatible, miniature power sources operated in a low current range has become manifest in recent years to meet the demands of the fast-growing market for biomedical microdevices. In this work, we focus on developing high-performance cathode material for biocompatible zinc/polymer batteries utilizing biofluids as electrolyte. Conductive polymers and graphene are generally considered to be biocompatible and suitable for bioengineering applications. To harness the high electrical conductivity of graphene and the redox capability of polypyrrole (PPy), a polypyrrole fiber/graphene composite has been synthesized via a simple one-step route. This composite is highly conductive (141 S cm …
Comparative Displacement Study Of Bilayer Actuators Comprising Of Conducting Polymers, Fabricated From Polypyrrole, Poly(3,4- Ethylenedioxythiophene) Or Poly(3,4-Propylenedioxythiophene), Babita Gaihre, Syed Ashraf, Geoffrey M. Spinks, Peter C. Innis, Gordon G. Wallace
Comparative Displacement Study Of Bilayer Actuators Comprising Of Conducting Polymers, Fabricated From Polypyrrole, Poly(3,4- Ethylenedioxythiophene) Or Poly(3,4-Propylenedioxythiophene), Babita Gaihre, Syed Ashraf, Geoffrey M. Spinks, Peter C. Innis, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
The stress gradient generated due to electrochemical oxidation/reduction of a conducting polymer in a bilayer actuator causes a bending movement. Here we report a comparative study of the displacement of bilayer actuators prepared using different conducting polymers. The effects of conducting polymers obtained from electrochemical or chemical synthesis route: different polymers (polypyrrole (PPy), poly(3,4-ethylenedioxythiophene) PEDOT and poly(3,3-dihexyl-3-4-dihydro-2H-thieno[3,4b][1,4]-dioxepine [PProDOT(Hx) 2]); and different electrolytes (0.1 M lithium trifluromethanesulfonate/propylenecarbonate (LiTFSI/PC) and 1-ethyl-3-methyl imidazolium trifluromethanesulfonate (EMITFSI)) on the displacement amplitude and displacement patterns of these actuators were investigated and compared. The results indicate that the bilayer actuator consisting of an electrochemically synthesized conducting polymer …
Surface Properties And Interaction Forces Of Biopolymer-Doped Conductive Polypyrrole Surfaces By Atomic Force Microscopy, Jani M. Pelto, Suvi P. Haimi, Aliisa S. Siljander, Susanna S. Miettinen, Kirsi M. Tappura, Michael J. Higgins, Gordon G. Wallace
Surface Properties And Interaction Forces Of Biopolymer-Doped Conductive Polypyrrole Surfaces By Atomic Force Microscopy, Jani M. Pelto, Suvi P. Haimi, Aliisa S. Siljander, Susanna S. Miettinen, Kirsi M. Tappura, Michael J. Higgins, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
Surface properties and electrical charges are critical factors elucidating cell interactions on biomaterial surfaces. The surface potential distribution and the nanoscopic and microscopic surface elasticity of organic polypyrrole-hyaluronic acid (PPy-HA) were studied by atomic force microscopy (AFM) in a fluid environment in order to explain the observed enhancement in the attachment of human adipose stem cells on positively charged PPy-HA films. The electrostatic force between the AFM tip and a charged PPy-HA surface, the tip-sample adhesion force, and elastic moduli were estimated from the AFM force curves, and the data were fitted to electrostatic double-layer and elastic contact models. The …
Polypyrrole Doped With Redox-Active Poly(2-Methoxyaniline-5-Sulfonic Acid) For Lithium Secondary Batteries, Yang Yang, Caiyun Wang, Syed A. Ashraf, Gordon G. Wallace
Polypyrrole Doped With Redox-Active Poly(2-Methoxyaniline-5-Sulfonic Acid) For Lithium Secondary Batteries, Yang Yang, Caiyun Wang, Syed A. Ashraf, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
Polypyrrole is a promising electrode material for flexible/bendable energy storage devices due to its inherent fast redox switching, mechanical flexibility, easy processability and being environmentally benign. However, its low attainable capacity limits its practical applications. Here, we synthesise a polypyrrole/poly(2-methoxyaniline-5-sulfonic acid) (PPy/PMAS) composite by incorporating redox-active PMAS into a PPy matrix via an electropolymerization method. For comparison, polypyrrole containing the electrochemically inert dopant p-toluenesulfonate (PPy-pTS) was prepared under the same conditions. The resultant PPy/PMAS film shows greatly improved electrochemical properties by harnessing the contribution from PMAS, i.e. higher specific capacity, better rate capability and improved cycling stability when used as …
Electrically Conductive Coatings Of Nickel And Polypyrrole/Poly(2- Methoxyaniline-5-Sulfonic Acid) On Nylon Lycra® Textiles, B C. Kim, P C. Innis, Gordon G. Wallace, C T.J Low, F C. Walsh, W J. Cho, K H. Yu
Electrically Conductive Coatings Of Nickel And Polypyrrole/Poly(2- Methoxyaniline-5-Sulfonic Acid) On Nylon Lycra® Textiles, B C. Kim, P C. Innis, Gordon G. Wallace, C T.J Low, F C. Walsh, W J. Cho, K H. Yu
Australian Institute for Innovative Materials - Papers
Woven nylon Lycra® has been coated with finely-divided electroless nickel-phosphorus, polypyrrole and electroless nickel/polypyrrole to produce flexible and electrically conductive textiles. The coated textiles were tested for their electrochemical activity, electrical resistivity and resistivity in response to mechanical strain. Pre-dyeing the textile with poly(2-methoxyaniline-5-sulfonic acid) (PMAS) prior to electroless metallization by electroless nickel and via chemical polymerization of polypyrrole was found to be beneficial in enhancing the resultant coating as well as stabilizing surface resistance responses when exposed to a wide range of strain. The mass gain due to the nickel coating was found to increase linearly with deposition time. …
Intrinsically Stretchable Supercapacitors Composed Of Polypyrrole Electrodes And Highly Stretchable Gel Electrolyte, Chen Zhao, Caiyun Wang, Zhilian Yue, Kewei Shu, Gordon G. Wallace
Intrinsically Stretchable Supercapacitors Composed Of Polypyrrole Electrodes And Highly Stretchable Gel Electrolyte, Chen Zhao, Caiyun Wang, Zhilian Yue, Kewei Shu, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
There has been an emerging interest in stretchable power sources compatible with flexible/wearable electronics. Such power sources must be able to withstand large mechanical strains and still maintain function. Here we report a highly stretchable H3PO4-poly(vinyl alcohol) (PVA) polymer electrolyte obtained by optimizing the polymer molecular weight and its weight ratio to H3PO4 in terms of conductivity and mechanical properties. The electrolyte demonstrates a high conductivity of 3.4 x 10-3 S cm-1, and a high fracture strain at 410% elongation. It is mechanically robust with a tensile strength of 2 MPa and a Young's modulus of 1 MPa, and displays …
Surface Modification Of Polypyrrole/Biopolymer Composites For Controlled Protein And Cellular Adhesion, Paul J. Molino, Binbin Zhang, Gordon G. Wallace, Timothy Hanks
Surface Modification Of Polypyrrole/Biopolymer Composites For Controlled Protein And Cellular Adhesion, Paul J. Molino, Binbin Zhang, Gordon G. Wallace, Timothy Hanks
Australian Institute for Innovative Materials - Papers
The ability to control the interaction between proteins and cells with biomaterials is critical for the effective application of materials for a variety of biomedical applications. Herein, the surface modification of the biological dopant dextran sulphate-doped polypyrrole (PPy-DS) with poly(ethylene glycol) to generate a biomaterial interface that is highly resistant to protein and cellular adhesion is described. Thiolated poly(ethylene glycol) (PEG-thiol) was covalently bound to PPy-DS backbone via a thiol-ene reaction. The surface resistance to an extracellular matrix protein fibronectin increased with increasing molecular weight and concentration of PEG-thiol, and was further optimised via increasing the reaction temperature and the …
Polypyrrole Stretchable Actuators, Wen Zheng, Gursel Alici, Phillip R. Clingan, Bridget Munro, Geoffrey M. Spinks, Julie R. Steele, Gordon G. Wallace
Polypyrrole Stretchable Actuators, Wen Zheng, Gursel Alici, Phillip R. Clingan, Bridget Munro, Geoffrey M. Spinks, Julie R. Steele, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
Here, we report a simple way to prepare stretchable polypyrrole (PPy)-based actuator materials that can be operated over a wide dynamic strain range and generate useable actuation displacements and pressures. The stretchable actuators were prepared as a laminated composite of PPy and a gold-coated roughened rubber sheet. By manipulating the corrugated surface of the rubber substrate, the stretchability of PPy was greatly improved. Gold-coated rubbers could be stretched to 30 percent without significant change in electrical resistance. The corrugated PPy/gold/rubber laminates successfully showed - 1 percents of actuation strain even when prestretched to 24 percent. The actuation strains were smaller …
Polypyrrole As Cathode Materials For Zn-Polymer Battery With Various Biocompatible Aqueous Electrolytes, Sha Li, Irin Sultana, Zaiping Guo, Caiyun Wang, G G. Wallace, Hua-Kun Liu
Polypyrrole As Cathode Materials For Zn-Polymer Battery With Various Biocompatible Aqueous Electrolytes, Sha Li, Irin Sultana, Zaiping Guo, Caiyun Wang, G G. Wallace, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
Polypyrrole films doped with p-toluenesulfonic anions on stainless steel mesh substrates were prepared by the electropolymerization method. A Zn/aqueous solution/polymer battery system was thus established with the polymer film as the cathode and three different biocompatible aqueous electrolytes. The mechanism of the anode reaction can be explained as the dissolution of Zn. It was found, however, that the discharge performance, including the discharge plateaus and capacities, were significantly affected by the polymer reactions. To elucidate the reaction mechanisms of the conductive polymer, its electrochemical properties were systematically studied by several techniques, including cyclic voltammetry, electrochemical impedance spectroscopy, and monitoring mass …
Evaluation Of Encapsulating Coatings On The Performance Of Polypyrrole Actuators, Sina Naficy, Nicholas Stoboi, Philip G. Whitten, Geoffrey M. Spinks, Gordon G. Wallace
Evaluation Of Encapsulating Coatings On The Performance Of Polypyrrole Actuators, Sina Naficy, Nicholas Stoboi, Philip G. Whitten, Geoffrey M. Spinks, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
Conjugated polymer actuators are electroactive materials capable of generating force and movement in response to an applied external voltage. Many potential biomedical and industrial applications require these actuators to operate in a liquid environment. However, immersion of uncoated conducting polymer actuators in non-electrolyte liquids greatly reduces their operating lifetime. Here, we demonstrate the use of spray coating as an effective and simple method to encapsulate polypyrrole (PPy) tri-layer bending actuators. Poly(styrene-b-isobutylene-b-styrene) (SIBS) was used as an encapsulating, compliant spray coating on PPy actuators. A significant enhancement in actuator lifetime in both air and water was observed by encapsulating the actuators. …
Quantifying Fibronectin Adhesion With Nanoscale Spatial Resolution On Glycosaminoglycan Doped Polypyrrole Using Atomic Force Microscopy, Amy Gelmi, Michael J. Higgins, Gordon G. Wallace
Quantifying Fibronectin Adhesion With Nanoscale Spatial Resolution On Glycosaminoglycan Doped Polypyrrole Using Atomic Force Microscopy, Amy Gelmi, Michael J. Higgins, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
The interaction of ECM proteins is critical in determining the performance of materials used in biomedical applications such as tissue regeneration, implantable bionics and biosensing. Methods: To improve our understanding of ECM protein–conducting polymer interactions, we have used Atomic Force Microscopy (AFM) to elucidate the interactions of fibronectin (FN) on polypyrrole (PPy) doped with different glycosaminoglycans. Results: We were able to classify four main types of FN interactions, including those related to 1) non-specific adhesion, 2) protein unfolding and subsequent unbinding from the surface, 3) desorption and 4) interactions with no adhesion. FN adhesion on PPy/hyaluronic acid showed a significantly …
Flexible Cellulose Based Polypyrrole-Multiwalled Carbon Nanotube Films For Bio-Compatible Zinc Batteries Activated By Simulated Body Fluids, Sha Li, Zai Ping Guo, Cai Yun Wang, Gordon G. Wallace, Hua-Kun Liu
Flexible Cellulose Based Polypyrrole-Multiwalled Carbon Nanotube Films For Bio-Compatible Zinc Batteries Activated By Simulated Body Fluids, Sha Li, Zai Ping Guo, Cai Yun Wang, Gordon G. Wallace, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
This work aims to develop biocompatible non-toxic materials for implantable bio-electronic cells. Polypyrrole (PPy)–carbon nanotube (CNT) composites with varied ratios of PPy to CNTs were chemically synthesized and used as cathodes with the support of cellulose paper. Zinc foil was used as the anode material due to its non-toxicity and moderate dissolution rate in aqueous solutions. Simulated body fluids (SBFs) with various protein concentrations were applied as electrolytes in this battery system. The PPy–CNT|Zn cell is capable of being discharged up to 24.5 hours at a current density of 60 μA cm−2 in a protein free SBF. The batteries …
Electrochemically Synthesized Stretchable Polypyrrole/Fabric Electrodes For Supercapacitor, Binbin Yue, Caiyun Wang, Xin Ding, Gordon G. Wallace
Electrochemically Synthesized Stretchable Polypyrrole/Fabric Electrodes For Supercapacitor, Binbin Yue, Caiyun Wang, Xin Ding, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
Wearable electronics offer the combined advantages of both electronics and fabrics. Being an indispensable part of these electronics, lightweight, stretchable and wearable power sources are strongly demanded. Here we describe a daily-used cotton fabric coated with polypyrrole as electrode for stretchable supercapacitors. Polypyrrole was synthesized on the Au coated fabric via an electrochemical polymerization process with p-toluenesulfonic acid (p-TS) as dopant from acetonitrile solution. This material was characterized with FESEM, tensile stress, and studied as a supercapacitor electrode in 1.0 M NaCl. This conductive textile electrode can sustain up to 140% strain without electric failure. It delivers a high specific …
A Battery Composed Of A Polypyrrole Cathode And A Magnesium Alloy Anode-Toward A Bioelectric Battery, Yong Kong, Caiyun Wang, Yang Yang, Chee O. Too, Gordon G. Wallace
A Battery Composed Of A Polypyrrole Cathode And A Magnesium Alloy Anode-Toward A Bioelectric Battery, Yong Kong, Caiyun Wang, Yang Yang, Chee O. Too, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
A bioelectric battery can be implanted into the human body and relies on oxygen in the internal body fluid to produce electrical energy. In this work, a battery that uses polypyrrole doped with a biological polyelectrolyte (dextran sulfate, an anti-coagulant) as the cathode and bioresorbable Mg alloy (AZ61) as the anode was developed. This battery exhibited a discharge capacity of 565 mA h g-1 in phosphate buffered saline (PBS, pH = 7.4), a commonly used electrolyte in biological research; offering a specific energy density of similar to 790W h kg-1. The electrochemical properties of the cathode, anode …
The Role Of Unbound Oligomers In The Nucleation And Growth Of Electrodeposited Polypyrrole And Method For Preparing High Strength, High Conductivity Films, Wen Zheng, Joselito M. Razal, Geoffrey M. Spinks, Van-Tan Truong, Philip G. Whitten, Gordon G. Wallace
The Role Of Unbound Oligomers In The Nucleation And Growth Of Electrodeposited Polypyrrole And Method For Preparing High Strength, High Conductivity Films, Wen Zheng, Joselito M. Razal, Geoffrey M. Spinks, Van-Tan Truong, Philip G. Whitten, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
Polypyrrole is a material with immensely useful properties suitable for a wide range of electrochemical applications, but its development has been hindered by cumbersome manufacturing processes. Here we show that a simple modification to the standard electrochemical polymerization method produces polypyrrole films of equivalently high conductivity and superior mechanical properties in one-tenth of the polymerization time. Preparing the film as a series of electrodeposited layers with thorough solvent washing between layering was found to produce excellent quality films even when layer deposition was accelerated by high current. The washing step between the sequentially polymerized layers altered the deposition mechanism, eliminating …
Synthesis And Electrochemical Characterization Of Lifepo4/C-Polypyrrole Composite Prepared By A Simple Chemical Vapor Deposition Method, Qiang Gong, Yu-Shi He, Yang Yang, Xiao Zhen Liao, Zi-Feng Ma
Synthesis And Electrochemical Characterization Of Lifepo4/C-Polypyrrole Composite Prepared By A Simple Chemical Vapor Deposition Method, Qiang Gong, Yu-Shi He, Yang Yang, Xiao Zhen Liao, Zi-Feng Ma
Australian Institute for Innovative Materials - Papers
A LiFePO4/C-polypyrrole (LiFePO4/C-PPy) composite as a high-performance cathode material is successfully prepared through a simple chemical vapor deposition (CVD) method. According to the transmission electron microscope (TEM) analysis, the surface of the LiFePO4/C is surrounded with PPy in the LiFePO4/C-PPy composite. The as-prepared LiFePO4/C-PPy material shows outstanding rate capability at 20°C and good cycle performance at 55°C in comparison with those of the bare LiFePO4/C material against Li anode. After 700 cycles, the discharge capacity of LiFePO4/C-PPy could still remain 110 mA h g−1 with …
All-Polymer Battery System Based On Polypyrrole (Ppy)/Para (Toluene Sulfonic Acid) (Pts) And Polypyrrole (Ppy)/Indigo Carmine (Ic) Free Standing Films, Irin Sultana, Md. Mokhlesur Rahman, Jiazhao Wang, Caiyun Wang, Gordon G. Wallace, Hua-Kun Liu
All-Polymer Battery System Based On Polypyrrole (Ppy)/Para (Toluene Sulfonic Acid) (Pts) And Polypyrrole (Ppy)/Indigo Carmine (Ic) Free Standing Films, Irin Sultana, Md. Mokhlesur Rahman, Jiazhao Wang, Caiyun Wang, Gordon G. Wallace, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
In this study, we introduce a novel all-polymer battery system based on conducting polymer (polypyrrole, PPy) doped with dopants of para (toluene sulfonic acid) (pTS) and indigo carmine (IC), respectively. The performance of the systems consisting of polypyrrole-para (toluene sulfonic acid) (PPy-pTS) as cathode and polypyrrole-indigo carmine (PPy-IC) as anode in conjunction with either a polymer based electrolyte or a commercial organic electrolyte of 1M LiPF6 in a 50:50 (v/v) mixture of ethylene carbonate (EC) and dimethyl carbonate (DMC) was evaluated. In the system, all the free-standing PPy-pTS and PPy-IC films were directly …
Polypyrrole Coated Nylon Lycra Fabric As Stretchable Electrode For Supercapacitor Applications, Binbin Yue, Caiyun Wang, Xin Ding, Gordon G. Wallace
Polypyrrole Coated Nylon Lycra Fabric As Stretchable Electrode For Supercapacitor Applications, Binbin Yue, Caiyun Wang, Xin Ding, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
Wearable electronics offer the combined advantages of both electronics and fabrics. Being an indispensable part of these electronics, lightweight, stretchable and wearable power sources are strongly demanded. Here we describe a daily-used nylon lycra fabric coated with polypyrrole as electrode for stretchable supercapacitors. Polypyrrole was synthesized on the fabric via a simple chemical polymerization process with ammonium persulfate (APS) as an oxidant and naphthalene-2,6-disulfonic acid disodium salt (Na2NDS) as a dopant. This material was characterized with FESEM, FTIR, tensile stress, and studied as a supercapacitor electrode in 1.0 M NaCl. This conductive textile could endure 1000 stretching cycles …
The Mechanical And The Electrical Properties Of Conducting Polypyrrole Fibers, Javad Foroughi, Shaban R. Ghorbani, Germanas Peleckis, Geoffrey M. Spinks, Gordon G. Wallace, Xiaolin Wang, S X. Dou
The Mechanical And The Electrical Properties Of Conducting Polypyrrole Fibers, Javad Foroughi, Shaban R. Ghorbani, Germanas Peleckis, Geoffrey M. Spinks, Gordon G. Wallace, Xiaolin Wang, S X. Dou
Australian Institute for Innovative Materials - Papers
The mechanical and the electrical properties of polypyrrole (PPy) fibers and electrochemically deposited PPy films were studied. It was found that the PPy fibers showed a significantly higher strength than the PPy films due to better orientation of the molecular structure. The electrochemically prepared PPy films had a higher electrical conductivity than that of the fibers at high temperature. At low temperature, the PPy fibers showed the higher conductivity. The conductivity results were analyzed in the frame of the three-dimensional variable range hopping model. The results showed that at room temperature the average hopping distance for the fibers was about …