Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 30 of 34
Full-Text Articles in Engineering
Fabrication Of Heterostructured Uio-66-Nh2 /Cnts With Enhanced Activity And Selectivity Over Photocatalytic Co2 Reduction, Xiaojun Wang, Guorui Yang, Guodong Chai, Muhammad Nasir, Silan Wang, Xing Zheng, Caiyun Wang, Wei Yan
Fabrication Of Heterostructured Uio-66-Nh2 /Cnts With Enhanced Activity And Selectivity Over Photocatalytic Co2 Reduction, Xiaojun Wang, Guorui Yang, Guodong Chai, Muhammad Nasir, Silan Wang, Xing Zheng, Caiyun Wang, Wei Yan
Australian Institute for Innovative Materials - Papers
© 2020 Hydrogen Energy Publications LLC Developing photocatalysts with superior efficiency and selectivity is an important issue for photocatalytic converting CO2. Hierarchically heterostructured one-dimensional nanomaterials represent a kind of promising catalysts for photocatalytic CO2 reduction on account of the high surface area and synthetic effect between different components. Herein, we synthesized UIO-66-NH2/carbon nanotubes (CNTs) heterostructures via a hydrothermal method, and investigated their photocatalytic performance. The element mapping, X-ray diffraction, and X-ray photoelectron spectroscopy collectively confirmed that the UIO-66-NH2 was successfully loaded on the surface of the CNTs. The specific surface area of the UIO-66-NH2/CNTs is 1.5 times higher than that …
Supercritical Co2-Constructed Intralayer [Bi2o2]2+Structural Distortion For Enhanced Co2 Electroreduction, Yannan Zhou, Pengfei Yan, Jun Jia, Suoying Zhang, Xiaoli Zheng, Li Zhang, Bin Zhang, Jun Chen, Weichang Hao, Gongji Chen, Qun Xu, Buxing Han
Supercritical Co2-Constructed Intralayer [Bi2o2]2+Structural Distortion For Enhanced Co2 Electroreduction, Yannan Zhou, Pengfei Yan, Jun Jia, Suoying Zhang, Xiaoli Zheng, Li Zhang, Bin Zhang, Jun Chen, Weichang Hao, Gongji Chen, Qun Xu, Buxing Han
Australian Institute for Innovative Materials - Papers
© 2020 The Royal Society of Chemistry. Inducing crystal distortion in two-dimensional (2D) materials to increase the number of active sites is of great significance in improving the intrinsic activity of electrocatalysts for the CO2 reduction reaction (CO2RR). Developing 2D materials as thin as possible is required for this goal. Herein, taking layered BiOCl as a prototype model, we achieved the intralayer [Bi2O2]2+ structural distortion by using supercritical CO2 as a solvent to reduce the number of interlayer chlorine atoms involved in the reaction. Contrary to expectations, further CO2RR experiments indicate that thick nanoplates exhibit a high faradaic efficiency of …
Fabrication Of Hierarchically One-Dimensional Znxcd1-Xs/Nitio3 Nanostructures And Their Enhanced Photocatalytic Water Splitting Activity, Ling Wang, Guorui Yang, Silan Wang, Jianan Wang, Muhammad Salman Nasir, Caiyun Wang, Shengjie Peng, Wei Yan, Seeram Ramakrishna
Fabrication Of Hierarchically One-Dimensional Znxcd1-Xs/Nitio3 Nanostructures And Their Enhanced Photocatalytic Water Splitting Activity, Ling Wang, Guorui Yang, Silan Wang, Jianan Wang, Muhammad Salman Nasir, Caiyun Wang, Shengjie Peng, Wei Yan, Seeram Ramakrishna
Australian Institute for Innovative Materials - Papers
Hierarchically one-dimensional nanomaterials represent a kind of promising catalyst for photocatalytic of hydrogen generation, where the photoinduced charge carriers can effectively separate and be engaged in the target reaction. Herein, we report the synthesis of hierarchically one-dimensional ZnxCd1-xS/NiTiO3 nanofibers and the investigations of their photocatalytic performance. These well-designed nanofibers demonstrate a typically one-dimensional heterostructure with an excellent continuity, and the element mapping, X-ray diffraction, and X-ray photoelectron spectroscopy collectively confirm the ZnxCd1-xS nanoparticles being decorated on the surface of NiTiO3 nanofibers successfully. The ZnxCd1-xS/NiTiO3 nanofibers exhibit enhanced efficiency in photocatalytic hydrogen production under visible light, compared with the ZnxCd1-xS/TiO2 nanofibers. …
Electronic Structure Engineering Of Licoo2 Toward Enhanced Oxygen Electrocatalysis, Xiaobo Zheng, Yaping Chen, Xusheng Zheng, Guoqiang Zhao, Kun Rui, Peng Li, Xun Xu, Zhenxiang Cheng, Shi Xue Dou, Wenping Sun
Electronic Structure Engineering Of Licoo2 Toward Enhanced Oxygen Electrocatalysis, Xiaobo Zheng, Yaping Chen, Xusheng Zheng, Guoqiang Zhao, Kun Rui, Peng Li, Xun Xu, Zhenxiang Cheng, Shi Xue Dou, Wenping Sun
Australian Institute for Innovative Materials - Papers
Developing low-cost and efficient electrocatalysts for the oxygen evolution reaction and oxygen reduction reaction is of critical significance to the practical application of some emerging energy storage and conversion devices (e.g., metal-air batteries, water electrolyzers, and fuel cells). Lithium cobalt oxide is a promising nonprecious metal-based electrocatalyst for oxygen electrocatalysis; its activity, however, is still far from the requirements of practical applications. Here, a new LiCoO 2 -based electrocatalyst with nanosheet morphology is developed by a combination of Mg doping and shear force-assisted exfoliation strategies toward enhanced oxygen reduction and evolution reaction kinetics. It is demonstrated that the coupling effect …
Electrostatically Assembled Construction Of Ternary Tio2-Cu@C Hybrid With Enhanced Solar-To-Hydrogen Evolution Employing Amorphous Carbon Dots As Electronic Mediator, Jiaxin Zhu, Mengmeng Zhang, Jinyan Xiong, Yinan Yan, Weijie Li, Gang Cheng
Electrostatically Assembled Construction Of Ternary Tio2-Cu@C Hybrid With Enhanced Solar-To-Hydrogen Evolution Employing Amorphous Carbon Dots As Electronic Mediator, Jiaxin Zhu, Mengmeng Zhang, Jinyan Xiong, Yinan Yan, Weijie Li, Gang Cheng
Australian Institute for Innovative Materials - Papers
The huge demand for renewable hydrogen produced by water splitting has prompted people to conduct in-depth research on the hydrogen evolution reaction for the development of earth-abundant, non-precious, and multi-functional metal catalysts. Herein, a noble-metal-free ternary composite of TiO2-Cu@C was prepared by electrostatic self-assembly loaded copper nanoparticles and amorphous carbon dots (CDs) on porous TiO2 microrods. The good conductivity of the CDs was beneficial to promoting the charge transfer and separation, generating an enhanced solar-to-hydrogen performance on TiO2-Cu@C. The optimized TiO2-Cu@C reveals a stable and notable hydrogen evolution rate of 3911 μmol g−1h−1, which is 1.6 times that of TiO2-Cu …
Active-Site-Enriched Iron-Doped Nickel/Cobalt Hydroxide Nanosheets For Enhanced Oxygen Evolution Reaction, Qian Zhou, Yaping Chen, Guoqiang Zhao, Yue Lin, Zhenwei Yu, Xun Xu, Xiaolin Wang, Hua-Kun Liu, Wenping Sun, Shi Xue Dou
Active-Site-Enriched Iron-Doped Nickel/Cobalt Hydroxide Nanosheets For Enhanced Oxygen Evolution Reaction, Qian Zhou, Yaping Chen, Guoqiang Zhao, Yue Lin, Zhenwei Yu, Xun Xu, Xiaolin Wang, Hua-Kun Liu, Wenping Sun, Shi Xue Dou
Australian Institute for Innovative Materials - Papers
Highly active, durable, and inexpensive nanostructured catalysts are crucial for achieving efficient and economical electrochemical water splitting. However, developing efficient approaches to further improve the catalytic ability of the well-defined nanostructured catalysts is still a big challenge. Herein, we report a facile and universal cation-exchange process for synthesizing Fe-doped Ni(OH)2 and Co(OH)2 nanosheets with enriched active sites toward enhanced oxygen evolution reaction (OER). In comparison with typical NiFe layered double hydroxide (LDH) nanosteets prepared by the conventional one-pot method, Fe-doped Ni(OH)2 nanosheets evolving from Ni(OH)2 via an Fe3+/Ni2+ cation-exchange process possess nanoporous surfaces with abundant defects. Accordingly, Fe-doped Ni(OH)2 nanosheets …
Capillary-Induced Ge Uniformly Distributed In N-Doped Carbon Nanotubes With Enhanced Li-Storage Performance, Haipeng Guo, Boyang Ruan, Lili Liu, Lei Zhang, Zhanliang Tao, Shulei Chou, Jiazhao Wang, Hua-Kun Liu
Capillary-Induced Ge Uniformly Distributed In N-Doped Carbon Nanotubes With Enhanced Li-Storage Performance, Haipeng Guo, Boyang Ruan, Lili Liu, Lei Zhang, Zhanliang Tao, Shulei Chou, Jiazhao Wang, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
Germanium (Ge) is a prospective anode material for lithium-ion batteries, as it possesses large theoretical capacity, outstanding lithium-ion diffusivity, and excellent electrical conductivity. Ge suffers from drastic capacity decay and poor rate performance, however, owing to its low electrical conductivity and huge volume expansion during cycling processes. Herein, a novel strategy has been developed to synthesize a Ge at N-doped carbon nanotubes (Ge at N-CNTs) composite with Ge nanoparticles uniformly distributed in the N-CNTs by using capillary action. This unique structure could effectively buffer large volume expansion. When evaluated as an anode material, the Ge at N-CNTs demonstrate enhanced cycling …
Photosensitization Of Tio2 Nanofibers By Ag2s With The Synergistic Effect Of Excess Surface Ti3+ States For Enhanced Photocatalytic Activity Under Simulated Sunlight, Samina Ghafoor, Sadia Ata, Nasir Mahmood, Salman Noshear Arshad
Photosensitization Of Tio2 Nanofibers By Ag2s With The Synergistic Effect Of Excess Surface Ti3+ States For Enhanced Photocatalytic Activity Under Simulated Sunlight, Samina Ghafoor, Sadia Ata, Nasir Mahmood, Salman Noshear Arshad
Australian Institute for Innovative Materials - Papers
No abstract provided.
Enhanced Simultaneous Detection Of Ractopamine And Salbutamol - Via Electrochemical-Facial Deposition Of Mno2 Nanoflowers Onto 3d Rgo/Ni Foam Templates, Mingyan Wang, Wei Zhu, Lin Ma, Juan Juan Ma, Dongen Zhang, Zhi Wei Tong, Jun Chen
Enhanced Simultaneous Detection Of Ractopamine And Salbutamol - Via Electrochemical-Facial Deposition Of Mno2 Nanoflowers Onto 3d Rgo/Ni Foam Templates, Mingyan Wang, Wei Zhu, Lin Ma, Juan Juan Ma, Dongen Zhang, Zhi Wei Tong, Jun Chen
Australian Institute for Innovative Materials - Papers
In this paper, we report a facile method to successfully fabricate MnO2 nanoflowers loaded onto 3D RGO@nickel foam, showing enhanced biosensing activity due to the improved structural integration of different electrode materials components. When the as-prepared 3D hybrid electrodes were investigated as a binder-free biosensor, two well-defined and separate differential pulse voltammetric peaks for ractopamine (RAC) and salbutamol (SAL) were observed, indicating the simultaneous selective detection of both β-agonists possible. The MnO2/RGO@NF sensor also demonstrated a linear relationship over a wide concentration range of 17nM to 962nM (R=0.9997) for RAC and 42nM to 1463nM (R=0.9996) for SAL, with the detection …
Enhanced Magnetism In Field-Cooled [Ni80fe20/Mn]3 Multilayers Studied Using Polarized Neutron Reflectometry, W Uilhoorn, S J. Callori, David L. Cortie, Hui-Chia Su, Y Khaydukov, Ko-Wei Lin, Frank Klose
Enhanced Magnetism In Field-Cooled [Ni80fe20/Mn]3 Multilayers Studied Using Polarized Neutron Reflectometry, W Uilhoorn, S J. Callori, David L. Cortie, Hui-Chia Su, Y Khaydukov, Ko-Wei Lin, Frank Klose
Australian Institute for Innovative Materials - Papers
Here, the interfacial magnetic coupling in an exchange biased [Ni80Fe20/Mn]3 multilayer system has been studied using polarized neutron re ectometry. Previous results on this system indicate the importance of the coupling between the Fe-Mn and Ni-Mn orbitals at the layer interfaces. Magnetic depth profiles of the multilayer were measured at low temperatures under field-cooled and zero-field-cooled conditions. While no definitive interfacial state was found, a magnetic moment enhancement of roughly 20-30% in the applied field direction was observed throughout the bulk of the NiFe layers in the field-cooled state as compared to the zero-field-cooled measurements. The origin of this enhancement …
Controllable Synthesis Of Concave Cubic Gold Core-Shell Nanoparticles For Plasmon-Enhanced Photon Harvesting, Yang Bai, Teera Butburee, Hua Yu, Zhen Li, Rose Amal, Gao Qing (Max) Lu, Lianzhou Wang
Controllable Synthesis Of Concave Cubic Gold Core-Shell Nanoparticles For Plasmon-Enhanced Photon Harvesting, Yang Bai, Teera Butburee, Hua Yu, Zhen Li, Rose Amal, Gao Qing (Max) Lu, Lianzhou Wang
Australian Institute for Innovative Materials - Papers
Well-defined core-shell nanoparticles (NPs) containing concave cubic Au cores and TiO2 shells (CA@T) were synthesized in colloidal suspension. These CA@T NPs exhibit Localized Surface Plasmon Resonance (LSPR) absorption in the NIR region, which provides a unique property for utilizing the low energy range of the solar spectrum. In order to evaluate the plasmonic enhancement effect, a variety of CA@T NPs were incorporated into working electrodes of dye-sensitized solar cells (DSSCs). By adjusting the shell thickness of CA@T NPs, the plasmonic property can be tuned to achieve maximum photovoltaic improvement. Furthermore, the DSSC cells fabricated with the CA@T NPs exhibit …
Enhanced Electron Lifetime Of Cdse/Cds Quantum Dot (Qd) Sensitized Solar Cells Using Znse Core-Shell Structure With Efficient Regeneration Of Quantum Dots, Rasin K. Ahmed, Long Zhao, Attila J. Mozer, Geoffrey D. Will, John M. Bell, Hongxia Wang
Enhanced Electron Lifetime Of Cdse/Cds Quantum Dot (Qd) Sensitized Solar Cells Using Znse Core-Shell Structure With Efficient Regeneration Of Quantum Dots, Rasin K. Ahmed, Long Zhao, Attila J. Mozer, Geoffrey D. Will, John M. Bell, Hongxia Wang
Australian Institute for Innovative Materials - Papers
Research on development of efficient passivation materials for high performance and stable quantum dot sensitized solar cells (QDSCs) is highly important. While ZnS is one of the most widely used passivation material in QDSCs, an alternative material based on ZnSe which was deposited on CdS/CdSe/TiO2 photoanode to form a semi-core/shell structure has been found to be more efficient in terms of reducing electron recombination in QDSCs in this work. It has been found that the solar cell efficiency was improved from 1.86% for ZnSe0 (without coating) to 3.99% using 2 layers of ZnSe coating (ZnSe2) deposited by successive ionic …
Crystalline Tio2@C Nanosheet Anode With Enhanced Rate Capability For Lithium-Ion Batteries, Fan Yang, Yuxuan Zhu, Xiu Li, Chao Lai, Wei Guo, Jianmin Ma
Crystalline Tio2@C Nanosheet Anode With Enhanced Rate Capability For Lithium-Ion Batteries, Fan Yang, Yuxuan Zhu, Xiu Li, Chao Lai, Wei Guo, Jianmin Ma
Australian Institute for Innovative Materials - Papers
TiO2@C nanosheets have been obtained by a facile solvothermal method using titanate butoxide and hydrofluoric acid as precursors, followed by our novel carbon coating technique using oleic acid as the carbon source. The TiO2@C nanosheet anode shows a high discharge capacity of 145.8 mA h g-1 after 50 cycles and excellent rate capability.
Significantly Enhanced Critical Current Density In Nano-Mgb2 Grains Rapidly Formed At Low Temperature With Homogeneous Carbon Doping, Yongchang Liu, Feng Lan, Zongqing Ma, Ning Chen, Huijun Li, Shaon Barua, Dipakkumar Patel, Md S. Hossain, S Acar, Jung Ho Kim, S X. Dou
Significantly Enhanced Critical Current Density In Nano-Mgb2 Grains Rapidly Formed At Low Temperature With Homogeneous Carbon Doping, Yongchang Liu, Feng Lan, Zongqing Ma, Ning Chen, Huijun Li, Shaon Barua, Dipakkumar Patel, Md S. Hossain, S Acar, Jung Ho Kim, S X. Dou
Australian Institute for Innovative Materials - Papers
High performance MgB2 bulks using carbon-coated amorphous boron as a boron precursor were fabricated by Cu-activated sintering at low temperature (600 °C, below the Mg melting point). Dense nano-MgB2 grains with a high level of homogeneous carbon doping were formed in these MgB2 samples. This type of microstructure can provide a stronger flux pinning force, together with depressed volatility and oxidation of Mg owing to the low-temperature Cu-activated sintering, leading to a significant improvement of critical current density (Jc) in the as-prepared samples. In particular, the value of Jc for the carbon-coated (Mg …
Enhanced Electron Lifetimes In Dye-Sensitized Solar Cells Using A Di-Chromophoric Porphyrin: The Utility Of Inter-Molecular Forces, Long Zhao, Pawel W. Wagner, Holly Van Der Salm, Keith C. Gordon, Shogo Mori, Attila J. Mozer
Enhanced Electron Lifetimes In Dye-Sensitized Solar Cells Using A Di-Chromophoric Porphyrin: The Utility Of Inter-Molecular Forces, Long Zhao, Pawel W. Wagner, Holly Van Der Salm, Keith C. Gordon, Shogo Mori, Attila J. Mozer
Australian Institute for Innovative Materials - Papers
Electron lifetimes in dye-sensitized solar cells employing a porphyrin dye, an organic dye, a 1:1 mixture of the two dyes and a di-chromophoric dye design consisting of the two dyes using a non-conjugated linker were measured, suggesting that the dispersion force of the organic dyes has a significant detrimental effect on the electron lifetime and that the di-chromophoric design can be utilized to control the effect of the dispersion force.
The Formation Of Nano-Layered Grains And Their Enhanced Superconducting Transition Temperature In Mg-Doped Fese0.9 Bulks, Feng Lan, Zongqing Ma, Yongchang Liu, Ning Chen, Qi Cai, Huijun Li, Shaon Barua, Dipakkumar Patel, Md Shahriar Hossain, Jung Ho Kim, S X. Dou
The Formation Of Nano-Layered Grains And Their Enhanced Superconducting Transition Temperature In Mg-Doped Fese0.9 Bulks, Feng Lan, Zongqing Ma, Yongchang Liu, Ning Chen, Qi Cai, Huijun Li, Shaon Barua, Dipakkumar Patel, Md Shahriar Hossain, Jung Ho Kim, S X. Dou
Australian Institute for Innovative Materials - Papers
To search a proper dopant to further improve superconductivity in 11 type Fe-based superconductors makes sense to both their superconductivity mechanism and possible technological applications. In present work, Mg doped FeSe polycrystalline bulks were obtained by a two-step solid-state reaction method. Even though there are many MgSe and iron impurities existing in the Mg heavy doped FeSe bulks, they exhibit obviously increased Tc compared to undoped FeSe sample. It was found that Mg addition has little effect on the crystal lattice parameters of superconducting beta-FeSe, whereas leads to the formation of nano-layered grain structure consisted of MgSe and beta-FeSe …
Α-Fe2o3/Graphene Nanocomposite As Anode Material For Sodium-Ion Batteries With Enhanced Capacity Retention, Zhijia Zhang, Yunxiao Wang, Shulei Chou, Huijun Li, Hua-Kun Liu, Jiazhao Wang
Α-Fe2o3/Graphene Nanocomposite As Anode Material For Sodium-Ion Batteries With Enhanced Capacity Retention, Zhijia Zhang, Yunxiao Wang, Shulei Chou, Huijun Li, Hua-Kun Liu, Jiazhao Wang
Australian Institute for Innovative Materials - Papers
Among the different energy storage systems, rechargeable lithium-ion batteries (LIBs) have been widely applied in various portable electronic devices due to their high energy densities, long cycle life, and lack of significant memory effect [1]. For wide-scale implementation of renewable energy, LIBs, however, face challenges related to their safety, lifetime, and cost. Based on the wide availability and low cost of sodium, sodium-ion batteries (SIBs) have the potential for meeting the demands of large-scale and sustainable applications. Many cathode materials have been proposed, whereas only a few anode materials have been investigated for SIBs [2]. The sodium ion (1.02 Å) …
A Solvothermal Strategy: One-Step In Situ Synthesis Of Self-Assembled 3d Graphene-Based Composites With Enhanced Lithium Storage Capacity, Jingjing Ma, Jiulin Wang, Yu-Shi He, Xiao Zhen Liao, Jun Chen, Jiazhao Wang, Tao Yuan, Zi-Feng Ma
A Solvothermal Strategy: One-Step In Situ Synthesis Of Self-Assembled 3d Graphene-Based Composites With Enhanced Lithium Storage Capacity, Jingjing Ma, Jiulin Wang, Yu-Shi He, Xiao Zhen Liao, Jun Chen, Jiazhao Wang, Tao Yuan, Zi-Feng Ma
Australian Institute for Innovative Materials - Papers
A facile and controllable approach has been developed to synthesize three-dimensional (3D) graphene-based monoliths. Here, as a proof-of-concept experiment, self-assembled 3D CoO/graphene sheets (CoO/GS) composites with porous structures have been successfully fabricated in an ethanol medium by a one-step, in situ growth, solvothermal method. During the process, the in situ nucleation and growth of CoO particles on GS were tuned by the formation of a 3D GS network. In the as-prepared composites, the self-assembled 3D GS network around the CoO particles can not only provide a 3D conductive matrix, but also buffer the volume changes of CoO and restrain the …
Enhanced Sodium-Ion Battery Performance By Structural Phase Transition From Two-Dimensional Hexagonal-Sns2 To Orthorhombic-Sns, Tengfei Zhou, Wei Kong Pang, Chaofeng Zhang, Jianping Yang, Zhixin Chen, Hua-Kun Liu, Zaiping Guo
Enhanced Sodium-Ion Battery Performance By Structural Phase Transition From Two-Dimensional Hexagonal-Sns2 To Orthorhombic-Sns, Tengfei Zhou, Wei Kong Pang, Chaofeng Zhang, Jianping Yang, Zhixin Chen, Hua-Kun Liu, Zaiping Guo
Australian Institute for Innovative Materials - Papers
Structural phase transitions can be used to alter the properties of a material without adding any additional elements and are therefore of significant technological value. It was found that the hexagonal-SnS2 phase can be transformed into the orthorhombic-SnS phase after an annealing step in an argon atmosphere, and the thus transformed SnS shows enhanced sodium-ion storage performance over that of the SnS2, which is attributed to its structural advantages. Here, we provide the first report on a SnS@graphene architecture for application as a sodium-ion battery anode, which is built from two-dimensional SnS and graphene nanosheets as complementary building blocks. The …
Enhanced Electrochemical Properties Of Cobalt Doped Manganese Dioxide Nanowires, Byoung Chul Kim, C Justin Raj, W J. Cho, W G. Lee, Hyeon Taek Jeong, K H. Yu
Enhanced Electrochemical Properties Of Cobalt Doped Manganese Dioxide Nanowires, Byoung Chul Kim, C Justin Raj, W J. Cho, W G. Lee, Hyeon Taek Jeong, K H. Yu
Australian Institute for Innovative Materials - Papers
The various molar concentrations of cobalt doped manganese dioxide (Co-MnO2) nanostructures were synthesized by an hydrothermal technique for electrochemical supercapacitor application. The X-ray diffraction analysis showed that the samples were composed of multiphase of MnO2 with dominant reflections of γ-MnO2 structure of crystallization. The morphological studies displayed the existence of MnO 2 nanowires with the width of 10-20 nm and showing a good degree of crystallization. The electrochemical characterization was performed using cyclic voltammetry, galvanostatic charge/discharge test and impedance spectroscopy in 1 M Na2SO4 aqueous electrolyte. All the samples exhibit a typical ideal capacitive behavior with an increasing order of …
Enhanced Visible-Light Photocatalytic Activity Of G-C3n4/Tio2 Films, Natkritta Boonprakob, Natda Wetchakun, Sukon Phanichphant, David Wexler, Peter Sherrell, Andrew Nattestad, Jun Chen, Burapat Inceesungvorn
Enhanced Visible-Light Photocatalytic Activity Of G-C3n4/Tio2 Films, Natkritta Boonprakob, Natda Wetchakun, Sukon Phanichphant, David Wexler, Peter Sherrell, Andrew Nattestad, Jun Chen, Burapat Inceesungvorn
Australian Institute for Innovative Materials - Papers
Enhanced photocatalytic degradation of methylene blue (MB) using graphitic carbon nitride/titanium dioxide (g-C3N4/TiO2) catalyst films has been demonstrated in this present work. The g-C3N4/TiO2 composites were prepared by directly heating the mixture of melamine and pre-synthesized TiO2 nanoparticles in Ar gas flow. The g-C3N4 contents in the g-C3N4/TiO2 composites were varied as 0, 20, 50 and 70 wt%. It was found that the visible-light-induced photocatalytic degradation of MB was remarkably increased upon coupling TiO2 with g-C3N4 and the best degradation performance of ∼70% was obtained from 50 wt% g-C3N4 loading content. Results from UV–vis absorption study, Electron microscopy, Fourier transform …
Edge-Enriched Graphene Quantum Dots For Enhanced Photo-Luminescence And Supercapacitance, Mahbub Hassan, Enamul Haque, Kakarla Raghava Reddy, Andrew I. Minett, Jun Chen, Vincent G. Gomes
Edge-Enriched Graphene Quantum Dots For Enhanced Photo-Luminescence And Supercapacitance, Mahbub Hassan, Enamul Haque, Kakarla Raghava Reddy, Andrew I. Minett, Jun Chen, Vincent G. Gomes
Australian Institute for Innovative Materials - Papers
Graphene quantum dots (GQDs) with their edge-bound nanometer-size present distinctive properties owing to quantum confinement and edge effects. We report a facile ultrasonic approach with chemical activation using KOH to prepare activated GQDs or aGQDs enriched with both free and bound edges. Compared to GQDs, the aGQDs we synthesized had enhanced BET surface area by a factor of about six, the photoluminescence intensity by about four and half times and electro-capacitance by a factor of about two. Unlike their non-activated counterparts, the aGQDs having enhanced edge states emit enhanced intense blue luminescence and exhibit electrochemical double layer capacitance greater than …
Enhanced Performance Of Dye-Sensitized Solar Cells Using Carbazole-Substituted Di-Chromophoric Porphyrin Dyes, Long Zhao, Pawel Wagner, Anastasia Elliott, Matthew Griffith, Tracey M. Clarke, Keith C. Gordon, Shogo Mori, Attila Mozer
Enhanced Performance Of Dye-Sensitized Solar Cells Using Carbazole-Substituted Di-Chromophoric Porphyrin Dyes, Long Zhao, Pawel Wagner, Anastasia Elliott, Matthew Griffith, Tracey M. Clarke, Keith C. Gordon, Shogo Mori, Attila Mozer
Australian Institute for Innovative Materials - Papers
The purpose of this work is to investigate the origin of improved photovoltaic performance of a series of di-chromophoric carbazole-substituted porphyrin dyes employed as sensitizers in dye-sensitized solar cells. Five di-chromophoric zinc porphyrin dyes with the same porphyrin core, a carbazole unit attached in the meso-position through a phenylethenyl linkage, and substituents spanning a range of electron affinities, in an attempt to tune the electronic level of the carbazole unit, have been synthesized (CZPs). Density functional theory (DFT) calculations predicted the nature of the electronic transitions observed in the CZP systems, showing a large degree of orbital mixing. In contrast, …
Pmn-Pt Based Quaternary Piezoceramics With Enhanced Piezoelectricity And Temperature Stability, Nengneng Luo, Shujun Zhang, Qiang Li, Qingfeng Yan, Wenhui He, Yiling Zhang, Thomas R. Shrout
Pmn-Pt Based Quaternary Piezoceramics With Enhanced Piezoelectricity And Temperature Stability, Nengneng Luo, Shujun Zhang, Qiang Li, Qingfeng Yan, Wenhui He, Yiling Zhang, Thomas R. Shrout
Australian Institute for Innovative Materials - Papers
The phase structure, piezoelectric, dielectric, and ferroelectric properties of (0.80-x)PMN-0.10PFN-0.10PZ-xPT were investigated systematically. The morphotropic phase boundary (MPB) was confirmed to be 0.30
Highly Water-Soluble Magnetic Iron Oxide (Fe3o4) Nanoparticles For Drug Delivery: Enhanced In Vitro Therapeutic Efficacy Of Doxorubicin And Mion Conjugates, Muhammad Irfan Majeed, Qunwei Lu, Wei Yan, Zhen Li, Irshad Hussain, Muhammad Nawaz Tahir, Wolfgang Tremel, Bien Tan
Highly Water-Soluble Magnetic Iron Oxide (Fe3o4) Nanoparticles For Drug Delivery: Enhanced In Vitro Therapeutic Efficacy Of Doxorubicin And Mion Conjugates, Muhammad Irfan Majeed, Qunwei Lu, Wei Yan, Zhen Li, Irshad Hussain, Muhammad Nawaz Tahir, Wolfgang Tremel, Bien Tan
Australian Institute for Innovative Materials - Papers
We report a simple one step protocol for the preparation of fairly monodisperse and highly water-soluble magnetic iron oxide nanoparticles (MIONs) through a co-precipitation method using a novel multifunctional, biocompatible and water-soluble polymer ligand dodecanethiol-polymethacrylic acid (DDT-PMAA). DDT-PMAA owing to its several intrinsic properties, not only efficiently controls the size of the MIONs but also gives them excellent water solubility, long time stability against aggregation and oxidation, biocompatibility and multifunctional surface rich in thioether and carboxylic acid groups. The molecular weight and concentration of the polymer ligand were optimized to produce ultrasmall (4.6 +/- 0.7 nm) MIONs with high magnetization …
Enhanced Pinning In Superconducting Thin Films With Graded Pinning Landscapes, M Motta, F Colauto, W A. Ortiz, J Fritzsche, J Cuppens, W Gillijns, V V. Moshchalkov, T H. Johansen, A W Sanchez, A Silhanek
Enhanced Pinning In Superconducting Thin Films With Graded Pinning Landscapes, M Motta, F Colauto, W A. Ortiz, J Fritzsche, J Cuppens, W Gillijns, V V. Moshchalkov, T H. Johansen, A W Sanchez, A Silhanek
Australian Institute for Innovative Materials - Papers
A graded distribution of antidots in superconducting a-Mo 79Ge21 thin films has been investigated by magnetization and magneto-optical imaging measurements. The pinning landscape has maximum density at the sample border, decreasing linearly towards the center. Its overall performance is noticeably superior than that for a sample with uniformly distributed antidots: For high temperatures and low fields, the critical current is enhanced, whereas the region of thermomagnetic instabilities in the field-temperature diagram is significantly suppressed. These findings confirm the relevance of graded landscapes on the enhancement of pinning efficiency, as recently predicted by Misko and Nori [Phys. Rev. B 85, 184506 …
Nanocomposites Of Silicon And Carbon Derived From Coal Tar Pitch: Cheap Anode Materials For Lithium-Ion Batteries With Long Cycle Life And Enhanced Capacity, Yun-Xiao Wang, Shulei Chou, Hua-Kun Liu, S X. Dou
Nanocomposites Of Silicon And Carbon Derived From Coal Tar Pitch: Cheap Anode Materials For Lithium-Ion Batteries With Long Cycle Life And Enhanced Capacity, Yun-Xiao Wang, Shulei Chou, Hua-Kun Liu, S X. Dou
Australian Institute for Innovative Materials - Papers
From energy and environmental consideration, an industrial waste product, coal tar pitch (CTP), is used as the carbon source for Si/AC composite. We exploited a facile sintering method to largely scale up Si/amorphous carbon nanocomposite. The composites with 20 wt.% silicon with PVdF binder exhibited stable lithium storage ability for prolonged cycling. The composite anode delivered a capacity of 400.3 mAh g−1 with a high capacity retention of 71.3% after 1000 cycles. Various methods are used to investigate the reason for the outstanding cyclability. The results indicate that the silicon nanoparticles are wrapped by amorphous SiOx and AC in Si/AC …
Aqueous Dispersions Of Reduced Graphene Oxide And Multi Wall Carbon Nanotubes For Enhanced Glucose Oxidase Bioelectrode Performance, Willo Grosse, Joffrey Champavert, Sanjeev Gambhir, Gordon G. Wallace, Simon E. Moulton
Aqueous Dispersions Of Reduced Graphene Oxide And Multi Wall Carbon Nanotubes For Enhanced Glucose Oxidase Bioelectrode Performance, Willo Grosse, Joffrey Champavert, Sanjeev Gambhir, Gordon G. Wallace, Simon E. Moulton
Australian Institute for Innovative Materials - Papers
Aqueous dispersions of reduced graphene oxide (rGO) and multi walled carbon nanotubes (MWCNT) were fabricated through a modified chemical reduction method. The significant advantage of the method developed here is the omission of any stabilising compound or organic solvent to obtain stable rGO-MWCNT dispersions. Significantly biological entities, in this case the enzyme glucose oxidase (GOx), can be successfully incorporated into the dispersion. These dispersions were characterised using XPS, SEM, zeta potential and particle size measurements which showed that the dispersion stability is not sacrificed with the addition of GOx, and significantly, the electrical properties of the rGO and MWCNTs are …
Highly Uniform Tio2/Sno2/Carbon Hybrid Nanofibers With Greatly Enhanced Lithium Storage Performance, Zunxian Yang, Qing Meng, Zaiping Guo, Xuebin Yu, Tailiang Guo, Rong Zeng
Highly Uniform Tio2/Sno2/Carbon Hybrid Nanofibers With Greatly Enhanced Lithium Storage Performance, Zunxian Yang, Qing Meng, Zaiping Guo, Xuebin Yu, Tailiang Guo, Rong Zeng
Australian Institute for Innovative Materials - Papers
Highly uniform, relatively large area TiO2/SnO 2/carbon hybrid nanofibers were synthesized by a simple method based on thermal pyrolysis and oxidation of an as-spun titanium-tin/polyacrylonitrile nanoweb composite in an argon atmosphere. This novel composite features the uniform dispersion and encapsulation of highly uniform nanoscale TiO 2/SnO2 crystals in a porous carbon matrix. The high porosity of the nanofiber composite material, together with the conductive carbon matrix, enhanced the electrochemical performance of the TiO 2/SnO2/carbon nanofiber electrode. The TiO 2/SnO2/carbon nanofiber electrode displays a reversible capacity of 442.8 mA h g-1 for up to 100 cycles, and exhibits excellent rate capability. …
Enhanced X-Ray Imaging For A Thin Film Cochlear Implant With Metal Artefacts Using Phase Retrieval Tomography, B D. Arhatari, Alexander R. Harris, Antonio G. Paolini, Andrew G. Peele
Enhanced X-Ray Imaging For A Thin Film Cochlear Implant With Metal Artefacts Using Phase Retrieval Tomography, B D. Arhatari, Alexander R. Harris, Antonio G. Paolini, Andrew G. Peele
Australian Institute for Innovative Materials - Papers
Phase retrieval tomography has been successfully used to enhance imaging in systems that exhibit poor absorption contrast. However, when highly absorbing regions are present in a sample, so-called metal artefacts can appear in the tomographic reconstruction. We demonstrate that straightforward approaches for metal artefact reconstruction, developed in absorption contrast tomography, can be applied when using phase retrieval. Using a prototype thin film cochlear implant that has high and low absorption components made from iridium (or platinum) and plastic, respectively, we show that segmentation of the various components is possible and hence measurement of the electrode geometry and relative location to …