Engineering Commons^™

Agricultural Water Management In The Sevier River Basin, Utah: A Multidisciplinary Approach, Daeha Kim

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The Sevier River Basin situated in south central Utah is characterized by its semiarid climate, snowmelt-driven runoff, and high dependency on agricultural economy. High evapotranspiration and low precipitation make agricultural production challenging, but naturally stored water in the snowpack in the mountains alleviates water stresses during high water demand seasons. The snowmelt-driven river flow along the main channel is highly exploited for irrigation for farms near the Sevier River. Reservoir operations and river diversions result in heavily regulated flows from the upper to the lower basins. The return flows of over-irrigated water in the upper basin increase salinity of surface …

The Effects Of Interactive Computer Simulation And Animation On Student Learning Of Rigid Body Dynamics: A Mixed Method Study, Oai Ha

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Engineering Dynamics (ED) courses are known as challenging and demanding for undergraduate students majored in many engineering fields, such as mechanical and aerospace engineering and civil and environmental engineering. The course is built upon the foundation and framework of mathematics and physics and requires students to have strong abstract thinking and reasoning skills. Rigid body dynamics (RBD), the second part of ED, investigates kinematics and kinetics of rigid bodies and is considered as a difficult subject by many undergraduate students because the course requires them to visualize abstract objects in motions. Although there have been many studies reporting the uses …

Characterization Of An E2v Charge-Coupled Device For The Michelson Interferometer For Global High-Resolution Thermospheric Imaging Instrument, James Beukers

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis presents the characterization process of an imaging device for a satellite. The camera system was built by the Space Dynamics Laboratory (SDL) and will be used in the Michelson Interferometer for Global High-resolution Thermospheric Imaging (MIGHTI) instrument for National Aeronautics and Space Administration's (NASA) Ionospheric Con- nection Explorer (ICON) satellite. This mission will further scientists' understanding of the connection between the Earth's weather and ionospheric conditions. The ionosphere, a part of the atmosphere, interferes with satellite communications, causing disturbances and disruptions. By learning more about the ionosphere through the data collected by this instrument, scientists will better understand …

Characterization And Performance Of Algal Biofilms For Wastewater Treatment And Industrial Applications, Maureen Kesaano

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This study was carried out on algal biofilms grown using rotating algal biofilm reactors (RABRs) with the aim of: i) characterizing their growth in terms of photosynthetic activity and morphology ii) evaluating their performance as a wastewater treatment option and a feedstock for biofuels production, and iii) examining the algal-bacteria interactions.

A review of algal biofilm technologies currently employed in wastewater treatment processes was made to compare nutrient removal efficiencies, factors that influenced algal biofilm growth, and the different bioproducts generated from algal biomass. Consequently, research efforts were directed towards addressing pertinent issues identified in literature in order to optimize …

Attacker-Induced Traffic Flow Instability In A Stream Of Automated Vehicles, Daniel D. Dunn

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Highway systems world wide continue to see an ever increased number of vehicles and subsequently a rise in congested traffic. This results in longer commute times, wasted energy as vehicles idle in stop and go traffic, and increases the risk of accidents. In short, increased congestion costs time and money. These issues have prompted much research into Automated Highway Systems (AHS). In AHS vehicles using computer algorithms can safely travel at much smaller inter-vehicle distances than human drivers are capable of. This increases the capacity of existing highway systems. Sensors aboard each vehicle make this possible by monitoring their surroundings. …

Bio-Inspired Materials And Micro/Nanostructures Enabled By Peptides And Proteins, Swathi Swaminathan

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Bio-nanotechnology refers to the field of science that intersects nanotechnology with biology. The study involves in the creation of bio-mimetic devices that emulate elements and systems of nature finding use in various applications. Nanotechnology involves the characterization of nanomaterials along with the study of molecular self-assembly and nanoelectronics. Controlled binding and assembly of proteins onto nanomaterials is at the core of biological materials science and engineering with wide-ranging applications. This hybrid technology opens up several avenues in the field of sensors, pharmaceuticals, artificial implants and so on.

In this work, different biomaterials and polymers were characterized for phage displayed peptide …

Modeling Transportation Planning Applications Via Path Flow Estimator, Seungkyu Ryu

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The current practice for modeling in the field of transportation planning is through a four-step travel demand forecasting procedure (i.e., trip generation, trip distribution, mode choice, and traffic assignment); the practice is commonly referred to as the four-step model. Although such a modeling approach has become standard practice, it is deficient in several areas. Specifically, (1) it lacks capability for modeling non-motorized modes such as bicycles, (2) it is inadequate for modeling multiple vehicle types sharing the same roadway space, and (3) it is difficult to apply to small communities with limited resources. This dissertation recognizes these deficiencies and responds …

Non-Catalytic Co-Gasification Of Sub-Bituminous Coal And Biomass, Guevara Che Nyendu

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Utilization of coal as a low-cost domestic energy source is becoming a subject of utmost importance due to fluctuating crude oil prices. However, coal use emits pollutants such as nitrous oxides (NO_x), sulfur oxides (SO_x), carbon dioxide (CO₂), and particulates that have negative environmental impact and significant issues on health. To minimize the harmful effects of coal use, renewable and sustainable biological or green materials called biomass are processed with coal to produce synthetic gas (syngas) that can be processed into clean energy fuels and value-added products.

Currently, coal is converted using combustion technology; …

Successful Paths To Becoming A Lean Organization In The Construction Industry, Robert D. Warcup

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Lean construction is defined as the continuous process of eliminating waste, with the goal of increasing value on construction projects to the owner and to all stakeholders of a project. It has gained considerable momentum since the early 2000s because of its potential for problem-solving and increased productivity, especially as many construction firms still struggle to adapt to an ever-changing industry. This study was designed to assist construction companies, especially company executives and managers, to better understand the requirements of a lean transformation by describing the paths of three highly successful lean construction firms from the U.S.

Nine lean advocates, …

Electrokinetic Flow In A Nanochannel With An Overlapped Electrical Double Layer, Zhuorui Song

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This research is a theoretical study aiming to improve the understanding of nanofluidic flows. Nanofluidic flows have a wide range of potential application in many fields, such as DNA analysis, drug delivery, analyte separation, power generation, and so on. The most common material used in nanofluidic flows is silica whose surfaces are charged mainly due to proton exchange with the fluids. Charges on the surfaces as well as near the surfaces in the fluid side cause a significantly different response of the fluids to the applied electric field or pressure difference compared to those at normal scale. In the previous …

Persistence Of Engineering Undergraduates At A Public Research University, Matthew Meyer

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This mixed-methodological study determined which factors contributed to undergraduate student attrition, and evaluated reasons ten undergraduate engineering students failed to complete their engineering degree at a major western research university. Institutional data were collected on engineering students over a multi-year period. These data were separated into groups of engineering students who persisted to the Junior year of their undergraduate engineering program (persisters), and those students who left their engineering program before their Junior year (nonpersisters). A quantitative analysis comparing these two groups of students uncovered significant predictors of persistence/nonpersistence in the engineering program. Qualitative inquiry was used to identify factors …

Risk Characterization From Multipathway Exposure Associated With Land Applying Biosolids By Accounting For Multimedia Mass Loss, Karthik Kumarasamy

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

There continues to be concern among communities living in the vicinity of biosolids land application sites about potential adverse health effects from the chemical contaminants present in biosolids. This study describes a procedure that will help answer questions about the risks involved in biosolids land application at the site level, thus, this study will provide a crucial communication tool for wastewater treatment facilities and biosolids land appliers to address the concerns of the public. Specifically, the study quantifies the exposure concentrations that a human being can become exposed to during their lifetime from the practice. Crucially, it takes a quantitate …

Effect Of Manufacturing Processes On The Loss Factor And Other Mechanical Properties Of Kenaf Fiber-Reinforced Composites, Brian P. Spackman

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The characteristics essential for manufacturing parts and products are not well known for natural fiber-reinforced composite materials. Natural fibers display properties similar to glass fibers, and present a more environmentally friendly option for manufacturing composite materials. This research investigates various parameters in the manufacture of kenaf fiber-reinforced composites including cure time, density, matrix hardener ratio, surface treatment, and fiber length and examines the effect they have on mechanical properties of the composite material. Several samples were created and subjected to a vibrational test. Using known relationships, mechanical properties were extracted from the test results. Samples were found to exhibit repeatable …

An Analysis Of Sensitivity In Economic Forecasting For Pavement Management Systems, Antonio Fuentes

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In the scope of transportation asset management, the maintenance and rehabilitation (M&R) performed on asphalt roads at the local government level requires careful planning and intelligent use of limited funding. For this reason, a Pavement Management System (PMS) is incorporated and used as a tool for local government leaders to make the best decision given their annual budget. The PMS process is a repeatable process which consists of determining present day pavement condition, evaluating future deterioration, performing an economic analysis of possible M&R treatments and finally implementing a proper M&R plan to keep the asphalt pavement network in good condition. …

Molecular Sensing And Imaging Of Human Disease Cells And Their Responses To Biochemical Stimuli, Lifu Xiao

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Advancement in microscopic and spectroscopic techniques could significantly improve our ability in the study and diagnosis of diseases. Especially, being able to image and detect human diseases at the cellular and molecular level allows people to diagnose diseases at early stages and to study the molecular mechanisms behind various diseases. Currently, histopathological techniques are most widely used for prognosis and diagnosis of human diseases. However, conventional histopathology requires a complex process of sample preparation, which limits the diagnostic efficiency of this technique. More importantly, it requires fixation of tissue or cell sample, making it unsuitable for the study of dynamic …

Mechanical Properties Of Kenaf Composites Using Dynamic Mechanical Analysis, Thomas A. Loveless

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Natural fibers show potential to replace glass fibers in thermoset and thermoplastic composites. Kenaf is a bast-type fiber with high specific strength and great potential to compete with glass fibers.

In this research kenaf/epoxy composites were analyzed using Dynamic Mechanical Analysis (DMA). A three-point bend apparatus was used in the DMA testing. The samples were tested at 1 hertz, at a displacement of 10 μm, and at room temperature.

The fiber volume content of the kenaf was varied from 20%-40% in 5% increments. Ten samples of each fiber volume fraction were manufactured and tested. The flexural storage modulus, the flexural …

Testing Of Rainflow Histograms Of Strain For Implementation As A Bridge Weigh-In-Motion Technique, Nephi R. Johnson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The highways and bridges that make up the nation’s infrastructure are becoming older and need replacement or maintenance. In order to determine the best use of funds, bridges are being monitored and studied. This paper was part of a long term study with the goal of monitoring multiple bridges for several years in order to develop an extensive network of bridge information. This particular study was on a bridge in Utah that was instrumented with permanent measurement and monitoring devices. Monitoring of bridges provides information on how the temperature and weather cause the bridge to move, change and age. It …

Methods Of Processing Kenaf Chopped Strand Mats For Manufacturing Test Specimens And Composite Structures, Joshua W. Heil

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Every year in the United States, 10 to 11 million vehicles reach the end of their life cycle. Nearly all of these go to a recycling facility. After the recycling process is complete an average of 25% of each vehicle, by weight, goes to waste. This demonstrates the need to use natural fibers in parts that could be recycled, like parts that can be made from kenaf. There are many reasons to consider using natural/bio-fiber composites (bio-composites). These reasons include human health and environmental factors as well as advantages that natural fibers have over fiberglass, such as: lower costs and …

Laboratory Study On The Effects Of Exit Face Inclination Of Critical Gradients, Richard Allen Keizer Jr.

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The objective of this research is to help better understand the effects of exit face inclinations on critical gradients. This will lead to more practical ways to predict critical hydraulic gradients and slope stability using soil properties and exit face conditions. Current geotechnical engineering does not consider these factors because they are not thoroughly understood. Despite the attempts to better predict critical gradients, methods developed over 70 years ago to model the heave mechanism are used to model failure mechanisms such as backward erosion (or piping). This critical hydraulic gradient is only calculated by means of the buoyant unit weight …

Techno-Economic Feasibility And Life Cycle Assessment Of Dairy Effluent To Biofuel Via Hydrothermal Liquefaction, Hailey M. Summers

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Delactosed whey permeate (delac) is a low valued by-product in the dairy industry with 90 million tons annually disposed of worldwide. Upgrading delac to bioproducts, specifically biofuel, has been demonstrated at laboratory scale through yeast fermentation. However, the large-scale environmental impact and economic feasibility of this process is yet to be quantified. Further research, focused on evaluating the sustainability, scalability and economic feasibility of the fermentation pathway, directs research and development to move the technology towards commercialization. The enclosed research incorporates biological experimentation with engineering systems modeling to evaluate the large-scale environmental impacts and economic feasibility of generating bioproducts from …

Systems Optimization Models To Improve Water Management And Environmental Decision Making, Omar Alminagorta Cabezas

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The degradation of water quality and wetlands is one of the most challenging environmental problems around the world. In spite of the magnitude of these environmental problems, few efforts identify how scarce resources (e.g., water, budget) can be more efficiently used to solve these problems. This dissertation presents a set of tools to help solve environmental problems related to excess phosphorus levels in water bodies and wetland degradation caused by water shortages and invasive vegetation. These tools are presented in three studies. The first study presents a simple optimization model that identifies the cost-effective combination of management practices to reduce …

Microfabrication Of Electrochemical Analytical Devices For Detection Of Pathogen Species Dna And Toxic Metal Ions, Spencer Williams

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Water quality is a crucial factor in determining the health of an environment, and in turn the health of all those living in the given environment. Early detection of potential hazards in source water used for drinking would help to avoid outbreaks of sickness and even death. Contaminants, found in contact and drinking water, having negative effects on human health may include pathogenic microorganisms, and metal ion pollutants such as lead or cadmium. Lead and cadmium were selected due to well-known electrochemical properties providing easy references for developing new detection devices. Current methods for detection of these contaminants are extremely …

Continuous Unbonded Post-Tensioned Members: Quantifying Strand Stress Increase, Philip D. Six

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Unbonded post-tensioning tendons are an efficient and cost effective method of reinforcing concrete floor slabs, slabs-on-grade, parking garages, and bridge structures. However, the behavior of these structures is not well understood. There is concern that due to the lack of a significant amount of reliable research data on specimens reinforced in this manner, the commonly used design methods tend to significantly under-predict the strength. Four large, scaled, floor slab sections were constructed and destructively tested with the intent of more accurately understanding the strength of specimens reinforced with this method. Four test specimens represent a significant percentage of the current …

Computational Fluid Dynamics Simulations Of Oscillating Wings And Comparison To Lifting-Line Theory, Megan Keddington

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Computational fluid dynamics (CFD) analysis was performed in order to compare the solutions of oscillating wings with Prandtl’s lifting-line theory. Quasi-steady and steady-periodic simulations were completed using the CFD software Star-CCM+. Quasi-steady simulations were completed for both twodimensional and three-dimensional setups. The steady-periodic simulations were only performed using a three-dimensional setup. The simulations were performed for nine separate frequencies in a pure plunging setup. An additional four simulations were then completed using a setup of combined pitching and plunging at four separate frequencies. Results from the CFD simulations were compared to the quasi-steady lifting-line solution in the form of the …

High Resolution Multi-Spectral Imagery And Learning Machines In Precision Irrigation Water Management, Leila Hassan-Esfahani

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The goals of preserving scarce water resources, cultivating more lands, and saving on irrigation water bills have directed the attention of water resources managers toward the concepts of precision agriculture and, in particular, to precision irrigation. The purpose of precision irrigation is to increase irrigation efficiency to avoid crop water stress, avoid yield reduction due to under-irrigation and leaching of nutrients, runoff, and reduce soil erosion due to over-irrigation. In this study, irrigation efficiency has been defined in terms of irrigation uniformity and the response of the crop to irrigation. Crop water demand, soil moisture, evapotranspiration rate, and potential water …

Anaerobic Co-Digestion Of Algal Biomass And A Supplemental Carbon Source Material To Produce Methane, Yousef Soboh

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The demand on alternative energy is rapidly increasing because the reserves of conventional fuel are decreasing and their impacts on the environment are increasing.
Developing renewable energy sources should receive utmost attention. The production of biofuels like methanol, biodiesel, and methane from various kinds of abundant biomass represents a very attractive energy source that can reduce the dependence on conventional fossil fuels energy.

Since algae contains high amounts of nitrogen and low carbon content, this research focused on anaerobic fermentation of algae to produce methane by blending algae with a supplemental carbon source material, sodium acetate. This was done to …

Parameterized Least-Squares Attitude History Estimation And Magnetic Field Observations Of The Auroral Spatial Structures Probe, Ryan J. Martineau

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

As charged particles from the Sun enter the Earth’s atmosphere and create the aurora borealis (Northern lights) and aurora australis (Southern lights), energy is transferred to the atmosphere. In order to better understand the energy transfer processes, the Auroral Spatial Structures Probe rocket was launched to make measurements in the active aurora. Several payloads were deployed by the rocket, each with sensors to measure the magnetic field and the electric field so that the way they change over time and in different positions could be observed. The measurements require accurate knowledge of the spacecraft orientation, and to that end this …

Optimization And Control Of Lumped Transmitting Coil-Based In-Motion Wireless Power Transfer Systems, Nazmul Hasan

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis explores optimization and control aspects of in-motion electric vehicle charging. The vision is of an electrified roadway, where the vehicles can move and charge at the same time. The present systems have long tracks embedded in the roadway which transfer energy. This thesis explores smaller coils in the road, which has the promise of higher efficiency and lower volt ampere ratings. The promise can only be realized through optimized design and synchronized control of charging with respect to vehicle position. The existing design procedures lack comprehensiveness, require designer experience and use computationally costly 3D FEM algorithms. The proposed …

Interactive Computer Simulation And Animation Learning Modules: A Mixed-Method Study Of Their Effects On Students' Problem Solving In Particle Dynamics, Yongquing Guo

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Engineering dynamics is a fundamental core course in many undergraduate engineering curricula. This course is widely regarded as one of the most difficult engineering courses for students to succeed in. A variety of instructional strategies, such as hands-on experimentation, multimedia games, and computer simulation and animation (CSA), have been developed to improve student learning. Among these instructional strategies, CSA has been receiving increasing attention and applications in the international engineering education community. CSA provides students with a visualization tool and a constructivist environment to better understand various engineering problems.

The goal of this dissertation research was to improve student learning …

In Vitro, Non-Invasive Imaging And Detection Of Single Living Mammalian Cells Interacting With Bio-Nano-Interfaces, Qifei Li

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Study of bio-nano-interfaces of living mammalian cells will help the identification of cellular alterations (e.g. nucleic acids, amino acids, biomechanics, etc.) due to external stimuli, the design of biomaterials (e.g. nanoparticles, nanotubes) and the investigation on the interaction between cells and bio-nano-interfaces (e.g. cell differentiation on 3D nanostructured materials). The chemical, physical, and mechanical changes of mammalian cells interacting with biomaterials can be investigated by analytical techniques. In this dissertation, cellular responses and property changes are evaluated by non-invasive spectroscopic technique, Raman microscopy (RM), and atomic force microscopy (AFM) combined with traditional biological methods. This dissertation includes the biophysical, biochemical …