Engineering Commons^™

Stem Teacher Database, Veronica Buss

Honors Theses

The College of Engineering and Applied Sciences (CEAS) Recruitment web application provides access to recruitment information for the Manager of Recruitment and Outreach and those who also use the spreadsheet file with their current data. This database is a functional database for the WMU college of engineering and applied sciences’ recruiters to organize their data on STEM teachers from the feeder high schools of WMU. The app provides an interface for its users to filter and search the data they have compiled to create recruitment mailing reports. The main purpose of this app was to facilitate the retrieval and upkeep …

Housing Pre-Fabrication And Resource Optimization, Emma Dubensky

Honors Theses

Enclosure during construction is often time-consuming, expensive, and at the mercy of the weather. By introducing methods for manufacturing prefabricated enclosure components such as wall panels and roof sections, the impact of the three major variables is reduced. Designs for trusses, roof sections, wall sections, and foundations were developed and selected using civil engineering principles; and manufacturing and logistical processes were optimized using engineering and project management skill sets. These multi-disciplinary efforts were combined to create an accessible and versatile set of designs and instructions that can improve the effectiveness of both a skilled and non-skilled volunteer workforce. By creating …

Silicon Oil Drop Experiment, Jacob Lutz

Honors Theses

When designing models for quantum systems, researchers are often limited to computer models to develop a large pool of data. This has always been the case until the discovery was made that bouncing droplets of silicone oil can provide a decent representation of quantum mechanical particles. A system to model this representation was created. It is designed to run continuously for a large number of trials without the need for human interaction, as well as collect motion data from generated oil droplets. The droplet generator system is composed of a fluid reservoir, pump, piezoelectric buzzer, fluid chamber, and a nozzle …

Paper Recycling Fiber Recapture, Erin Riley

Honors Theses

The goal of the Yoda Chemical Company Paper Recycling Fiber Recapture project and subsequent report was to identify and recommend plant optimization opportunities associated with the potential recovery of five waste streams. Additionally, an analysis of the upgrade’s design was completed in order to determine the economic viability of fiber recapture. Beginning the analysis, the five waste streams were identified and analyzed. The waste streams include the top liner, back liner, and filler liner primary cleaner rejects on the K1 machine, the common rejects from under the K3 paper machine, and the tertiary cleaner rejects from stock preparation.

Two different …

Software Tool For Analyzing The Bending Strength Of Gear Teeth, Tayla Hall

Honors Theses

Current finite element (FE) models for gear analysis are computationally expensive. We will develop a software tool in Excel to efficiently assess the effect of different root geometries on gear tooth bending strength. The tool will assess the change in root stress as the root fillet shape is changed, using a 2-D model of a representative gear tooth using an A to B comparison. This is assumed to correlate to equivalent stress reduction in an actual gear. The tool will be validated by comparing the root stress found using the software to a FE analysis of root stress using ANSYS. …

Design Of Outdoor Residential Lighting Fixture, Jenna Vanmarter

Honors Theses

No abstract provided.

Housing Prefabrication And Resource Optimization, Megan Scherpereel

Honors Theses

Enclosure during construction is often time-consuming, expensive, and at the mercy of the weather. By introducing methods for manufacturing prefabricated enclosure components such as wall panels and roof sections, the impact of the three major variables is reduced. Designs for trusses, roof sections, wall sections, and foundations were developed and selected using civil engineering principles; and manufacturing and logistical processes were optimized using engineering and project management skill sets. These multi-disciplinary efforts were combined to create an accessible and versatile set of designs and instructions that can improve the effectiveness of both a skilled and non-skilled volunteer workforce. By creating …

Development Of Functional Materials And Devices On Flexible Platforms Using Additive Print Manufacturing Processes For Biomedical And Environmental Applications, Dinesh Maddipatla

Dissertations

In recent years, considerable research has been vested into the development of printed electronics (PE) to explore the best ways of fabricating electronic devices on flexible platforms using additive print manufacturing processes. PE produces flexible devices that are compatible with complex geometries, foldable applications and conformal to curved surfaces, with a promising potential for large‐area device fabrication at relatively lower manufacturing costs. This dissertation focuses majorly on the design and fabrication of novel flexible functional materials and devices for biomedical and environmental applications using additive printing processes.

Initially, a simple paper-based low cost and rapid prototypable platform with oxygen sensors …

Atmospheric Turbulence Distortion In Video: Restoration Utilizing Sparse Analysis, Benjamin J. Sanda

Dissertations

The removal of atmospheric turbulence (AT) distortion in long range imaging is one of the most challenging areas of research in imaging processing with an immediate need for solutions in several applications such as in military and transportation systems. AT exacerbates distortion due to non-linear geometric blur and scintillations in long-distance images and videos, severely reducing image quality and information interpretation. AT negatively impacts both human and computer vision systems, compromising visibility essential for accurate object identification and tracking.

In this dissertation, a novel sparse analysis framework is developed to address efficient AT blur and scintillation removal in video. Operating …

Objectively Determining The Language-Related Communication Challenges For In-Flight Operations, Fehime Utkan

Dissertations

Communication breakdowns between pilots and air traffic controllers (ATCs) have been identified as primary factors in fatal airplane accidents (Wu et. al., 2019; Bauh & Stolzer, 2018; Ritter, 1996; Eurocontrol, 2011). Although there are various aspects that have affected communication efficiency, language-related issues have been mostly associated with transmissions involved in serious incidents, especially in multicultural flight environments (Sexton & Helmrich, 2000). More than 2,000 people have died in accidents where miscommunication was a primary factor (Bauh & Stolzer, 2018; Patty, 2016). By the year of 2025, the air transportation system is projected to become more complex, and the volume …

Atherosclerosis: Pathology, Role Of Sd-Ldl, Particle Size Characterization Of Sd-Ldl With Multiangle Light Scattering, Akshay Sudhakar Ukey

Masters Theses

Atherosclerosis is an inflammatory disease due to the accumulation of lipids in the inner wall of arteries. As per the report of Center of Diseases Control and Prevention (CDC), 1 in every 4 deaths is due to heart diseases each year. Atherosclerosis occurs when artery walls harden by the buildup of cholesterol, forming multiple atherosclerotic plaques within the aorta (4). Out of the modern medicines available to control cholesterol, statin is amongst the foremost widely used because it is both safe and effective in lowering high risk patients (9). However, usage of high statins dosage typically leads to some mild …

Cellular Attachment On Poly(Lactic Acid) For Use In Tissue Engineering, Stephen R. Hunter

Masters Theses

Tissue engineering is a promising new method for organ regeneration. This method can be used to repair damaged tissue, or possibly replace a fully functional organ. In summary, a biopsy is taken from a donor, isolated, then grown onto a framework resembling an organ. Once grown; it is then transplanted into the patient. Over time, the body will degrade the scaffold, leaving the organ or tissue in its place. As this scaffold is present in the body for an extended time; factors like biocompatibility, toxicity, immunogenicity, and structural stability must be researched.

Several polymers have already been researched for use …

Development Of A Single Emitter Ionic Liquid Ion Source Research Platform, Thomas V. Kerber

Masters Theses

A single emitter ionic liquid ion source using porous borosilicate glass was developed. Two emitters with different radii of curvatures were tested using 1-ethyl-3-methylimidazolium tetrafluoroborate (EMI-BF₄). I-V curves of the currents on the extractor electrode and a collector plate were obtained for potential differences between the emitter and the extractor ranging from 0 V to 3500 V. For the first emitter chip, extraction began near 2400 V. The highest emission current measured on the first chip was 80 µA at 3500 V with an interception current on the extractor of 4.86 µA. An new collector plate was used …

Synthesis And Characterization Of Non-Pgm Catalysts For Fuel Cell Applications, Sudharsan Sridhar

Masters Theses

Fuel Cells convert the chemical energy of a fuel and an oxidizing agent into electricity through a pair of redox reactions. Proton Exchange Membrane (PEM) fuel cells convert (efficiency-60%) hydrogen and air to power the electric motors with zero emissions, facilitating the development of environmentally friendly and sustainable automobile technologies. One of the major obstacles for larger commercial viability of Fuel Cells for automobile applications is their cost-effectiveness. Currently, fuel cells use platinum as a catalyst material, which is prohibitively expensive for commercial automobile applications. The development of non-Platinum Group Metal (non-PGM) catalyst materials with similar electrochemical performance to that …

Application Of Artificial Intelligence And Geographic Information System For Developing Automated Walkability Score, Md Mehedi Hasan

Dissertations

Walking is considered as one of the major modes of active transportation, which contributes to the livability of cities. It is highly important to ensure walk friendly sidewalks to promote human physical activities along roads. Over the last two decades, different walk scores were estimated in respect to walkability measures by applying different methods and approaches. However, in the era of big data and machine learning revolution, there is still a gap to measure the composite walkability score in an automated way by applying and quantifying the activityfriendliness of walkable streets. In this study, a street-level automated walkability score was …

Wind Uplifting Performance Of Roof-To-Wall Connections And Roof Structures With Elastomeric Adhesives In Light-Frame Wood Buildings, Bilal M. Alhawamdeh

Dissertations

Light-frame wood residential buildings are highly susceptible to damage caused by severe wind events such as hurricanes and tornados. Roof failures in residential buildings are commonly observed due to weaknesses of or missing connections. Roof-to-wall connections not only have significant influences on roof performance but also affect building resistance due to their critical role of transferring wind loads to the wall system and ultimately to the foundation. Roof fails when it has no sufficient wind uplift resistance due to improper selection or installation of construction materials (including fasteners) and strength degradation due to aging or long service. Toenailing is commonly …

Investigating Newly Discovered Oscillation Modes In Magnetically Shielded Hall Effect Thrusters Utilizing High Speed Diagnostics, Matthew Joseph Baird

Dissertations

Magnetically shielded Hall effect thrusters (MSHETs) are a variant of Hall effect thrusters (HET) that provide the favorable thrust-to-power ratio and high specific impulse of traditional stationary plasma type (STP) HETs but with an extremely long lifetime. MSHETs exhibit unique discharge plasma oscillations compared to traditional unshielded HETs. In this study, measurements of plasma oscillations in the state-of-the-art 12.5 kW Hall Effect Rocket with Magnetic Shielding (HERMeS) were obtained at various discharge voltages while holding other operation parameters constant. Data were collected using high-speed imaging, voltage, current, and plasma probes. The thruster exhibits two dominant oscillation modes within the discharge …

Accumulation Of Polar Vorticity On Giant Planets: Towards A Three-Dimensional Theory, Shawn R. Brueshaber

Dissertations

My research investigates the polar atmospheric dynamics of the giant planets: Jupiter and Saturn (gas giants), and Uranus and Neptune (ice giants). I conduct my research modifying and applying the Explicit Planetary Isentropic Coordinate global circulation code to model the polar regions of the four giant planets.

The motivation behind my research is to uncover the reason why giant planet polar atmospheric dynamics differ. Jupiter features multiple circumpolar cyclones arranged in geometrical configurations, whereas Saturn features a single pole-centered cyclone. Uranus and Neptune also appear to have single pole-centered cyclones, albeit, larger than those on Saturn. …

A Framework For Using Fused Image Data In Statistical Process Control, Shengfeng Chen

Dissertations

The use of image data in manufacturing quality control systems has grown rapidly over the years. Technological advancements in imaging devices (e.g., digital cameras, x-ray scanners, infrared cameras) have provided convenient and cost-effective ways to obtain images. These images contain important quality features (e.g., textures and product dimensions) that can be used to monitor, diagnose, predict, and control manufacturing processes. A key tool for monitoring images is statistical process control charts. Integrating images of parts to detect process shifts can significantly improve a quality systems efficiency. Unfortunately, appropriate techniques that take full advantage of data-rich images for control charting are …

Software Quality Control Through Formal Method, Jialiang Chang

Dissertations

With the improvement of theories in the software industry, software quality is becoming the most significant part of the procedure of software development. Due to the implicit and explicit vulnerabilities inside the software, software quality control has caught more researchers and engineers’ attention and interest.

Current research on software quality control and verification are involving various manual and automated testing methods, which can be categorized into static analysis and dynamic analysis. However, both of them have their own disadvantages. With static analysis methods, inputs will not be taken into consideration because the software system isn’t executed so we do not …

Embedded Gold Nanoparticles For Metal Enhanced Photoluminescence, Hasna Alali

Dissertations

Noble metal nanoparticles (MNPs) have attracted great attention in electronics, solar cells and catalysis. Their unique optical properties and biocompatibility makes them useful in biological applications like imaging, drug delivery, therapy and diagnostic. At the surface of MNPs the collective oscillation of free electrons resonates with a particular wavelength of incident light, generating the Localized Surface Plasmons Resonance (LSPR). LSPR results in absorption and scattering of incident light. Scattering results in reflecting photons and absorption leads to enhanced photoluminescence and quenching of fluorophores, if the fluorophore is in the vicinity of MNPs.

Most of the studies in this regard have …

A Framework To Support Automatic Certification For Self-Adaptive Systems, Ioannis Nearchou

Masters Theses

Presently, cyber-physical systems are increasingly being integrated into societies, from the economic sector to the nuclear energy sector. Cyber-physical systems are systems that combine physical, digital, human, and other components, which operate through physical means and software. When system errors occur, the consequences of malfunction could negatively impact human life. Academic studies have relied on the MAPE-K feedback loop model to develop various system components to satisfy the self-adaptive features, such that violation of the safety requirements can be minimized. Assurance of system requirement satisfaction is argued through an industrial standard form, called an assurance case, which is usually applied …

Prediction Of Isotropic Strain Hardening Material Properties Using Gradient Boosted Regression Tree Method And Hyperparameter Optimization, Darren R. Promer

Masters Theses

In this study a new technique is proposed for the determination of elastic-plastic stress-strain relations for isotropic materials using the force-displacement output from an instrumented indentation test, finite element simulation, and machine learning methods. This non-destructive testing methodology has promising potential for industry implementation. Applications to benefit from this method include the characterization of localized material properties on surface engineered components, and the post-manufacturing assessment of material properties for items such as additively manufactured metallic components and load-bearing welded joints.

Currently, the capability of the instrumented indentation test for determining material properties is limited to the elastic modulus and surface …

Flexible Capacitive Pressure Sensors And Triboelectric Energy Harvesters Using Laser-Assisted Patterning Process For Flexible Hybrid Electronic Applications, Valliammai Palaniappan

Masters Theses

This work focuses on the design, fabrication and characterization of novel flexible capacitive pressure sensors and triboelectric energy harvesters using laser-assisted patterning process for flexible hybrid electronic applications. Initially, the capacitive pressure sensor was developed by fabricating a set of polydimethylsiloxanes (PDMS) dielectric films with pyramid shaped micro-structures using a laser-assisted patterning process. The pressure sensor consists of two electrodes (top and bottom) that were fabricated by depositing silver (Ag) on flexible polyethylene terephthalate (PET) using additive screen-printing process. Finally, the pressure sensor was assembled by attaching the top and bottom Ag electrodes to the smooth side of pyramid shaped …

A Multiscale Thermomechanical Metal Additive Manufacturing Simulation And The Impact Of Geometry On Residual Stress And Distortion, Luis Fernando Silva Velasco

Masters Theses

Metal additive manufacturing is an enabling technology for the rapid prototyping and manufacturing of geometrically complex parts that would otherwise be difficult or impossible to manufacture. However, the manufacturing process can produce undesired residual stresses and distortions. The first part of the work describes the implementation of a multiscale, thermo-mechanical simulation modeling the metal powder bed fusion additive manufacturing process. NASA’s Micromechanics Analysis Code was is to incorporate the microscale effects of an evolving material porosity on the predicted macroscale residual fields. The simulation shows that modeling an evolving material porosity, as the material transitions from a metal powder to …

Use Of Dimpling Techniques To Alter The Vibration And Acoustic Characteristics Of Beams And Plates, Mofareh Ghazwani

Dissertations

Structures such as beams and plates can produce potentially high levels of unwanted vibrations and noises in the environment. A method for improving the vibroacoustic characteristics of structures based on creating dimples on its surfaces is presented in this study. The goal of this technique is to keep the mass of the subject structure the same while changing its vibration and sound radiation characteristics. A boundary value model (BVM), derived using Hamilton’s Variational Principle, is used for modeling dimpled beams subjected to various boundary conditions. Using this method, the non-dimensional equations of motion, boundary conditions, and continuity conditions for a …

Experimental Study Of Collecting Running Water From Moderately Heated Water Vapors Using Turbulence-Induced Particles Collision (Tipc) Device, Hassan Ali Ghazwani

Dissertations

This dissertation describes the development of an alternative technique to collect water vapors or changing any vapor state to liquid state using a device called the turbulence-induced particles collision generator (TIPC). The experiment of collecting water vapors using the TIPC device is conducted at different values of temperature. The spatial patterns of droplets deposited on a wall due to the TIPC are measured at different values of pressure using luminescent oil technique, and the integrated intensity of deposited droplets is calculated. Also, the luminescent oil technique has been used to visualize the deposited particles on a pipe wall. ANSYS FLUENT …

Turbulence Investigations In The Core-Flow Of An Internal Combustion Engine, James R. Macdonald

Dissertations

Turbulence significantly impacts the operation of energy conversion devices. In internal combustion (IC) engines, mixing, heat transfer, and combustion are all strongly dependent on the turbulence inside the cylinder. Consequently, knowledge of the state of turbulence is critical for improving our understanding and modeling of engine processes.

Turbulence states may be determined through analysis of the Reynolds stress tensor, which can in turn be experimentally quantified using velocity data. In this research, stereoscopic particle image velocimetry (stereo-PIV) experiments were conducted in a single-cylinder, motored engine with optical access to measure the two-dimensional, three-component (2D-3C) velocity fields throughout the compression stroke. …

Experimental And Numerical Investigation Of Free Water Surface Evaporation In Case Of Natural Convection, Hassan Fagehi

Dissertations

Evaporation of water can be considered an essential part of the hydrological cycle. It is important for many technological applications such as industrial cooling towers, air conditioning, solid material drying, distillation, and liquid film cooling. Moreover, the interfacial convection caused by the density gradient belongs to Rayleigh convection, which plays an important role in the evaporation process by means of intensifying heat and mass transfer, as in an isopropanol‒water system. In addition, natural convection, which can be defined as a buoyancy-driven flow, is important in astrophysics, geophysics, and numerous engineering applications such as solar energy systems, cooling of electrical equipment, …

Numerical Performance Evaluation Of The Wooden Frame Structures With Adhesive Applied Connection Under Wind And Seismic Loading, Sharthak Bhandary

Masters Theses

The objective of the research is divided into two folds. The first objective is to study the state-of-the-art modeling method for the wooden frame construction, while the second objective is to evaluate the performance of a wooden frame structure with construction adhesives under hazardous loading conditions using the selected numerical modeling method. The numerical modeling tools were classified under academic and commercial categories based on the purpose of their development. Both academic and commercial tools were further classified based on model types of the structural systems (i.e., shear walls and three-dimensional (3D) buildings) and the applied loads (i.e., wind loading …