Engineering Commons^™

Research And Education For Optimizing The Development And Implementation Of An Unmanned Aircraft Program At The Nebraska Department Of Transportation, Wayne Woldt, Jon Starr, Christopher M. U. Neale

Nebraska Department of Transportation: Research Reports

This report describes the development and implementation of an Unmanned Aircraft System Program at the Nebraska Department of Transportation (NDOT). The project involved the selection and purchase of appropriate UAS and imaging systems for NDOT, education and training for NDOT personnel with classroom and hands-on operation of UAS with the goal of obtaining proficiency and pilot licenses. In addition, the development of policy for the use of UAS within NDOT was accomplished as well as standard operating procedures (SOP) documentation and the development of example case studies of interest to NDOT using the purchased systems and technology.

Low-Cost Modal Identification Sensors For Bridge Field Testing, Daniel Linzell, Saaed Eftekhar Azam, Samira Ardani, Ahmed E Rageh

Nebraska Department of Transportation: Research Reports

This report provides a framework for experimental load rating of bridges via inclusion of low-cost dynamic sensors and dynamic tests. Currently 25% of the bridges in Nebraska are posted for live load. According to the National Bridge Inventory (NBI) in 2012, 93% of all postings in the US were based analytical load ratings, 7% were posted using field evaluation and engineering judgement, and 1% were posted using experimental load rating methods.

Instrumentation costs and traffic interruptions can be problematic when load testing is necessary to accurately assess in-situ bridge live load capacity. Recent advances in (i) sensing technology and (ii) …

Feasibility And Implementation Of Balanced Mix Design In Nebraska, Gabriel Nsengiyumva, Yong-Rak Kim, Jiong Hu

Nebraska Department of Transportation: Research Reports

Balanced mixture design is an alternative asphalt concrete design method that incorporates the performance of mixtures during the design. Balanced mixture design consists of performance test methods and performance criteria. Compared to the existing Superpave design method which mostly relies on volumetrics to design mixtures, balanced mixture design is more suited to account for performance improvements originating from reclaimed asphalt pavement and other foreign additives such as rejuvenators, warm- mix asphalt additives, polymers, and anti-stripping agents. This study investigated the feasibility of the implementation of balanced mixture design in Nebraska mixtures by exploring appropriate test methods (i.e., for fracture and …

Evaluation Of Mixtures And Pavement Performance For Rehabilitation Methods, Mohammad Rahmani, Gabriel Nsengiyumva, Yong-Rak Kim, Jiong Hu

Nebraska Department of Transportation: Research Reports

Pavement rehabilitation practice involves milling an asphalt surface and placing a new layer. The incorporation of reclaimed asphalt pavement (RAP) mixtures brings cost savings and preserves the environment and natural resources. However, the use of recycled materials can compromise pavement performance, in particular, RAP can contribute to cracking because the mixtures with recycled materials become more brittle. In Nebraska, pavement rehabilitation has mostly been conducted by milling old 4-in. asphalt surface and placing a new 4-in. layer. Due to the potentially increased use of RAP mixtures for pavement rehabilitation, it is necessary to look into potential applications of RAP-induced overlay …

Supporting Bridge Management With Advanced Analysis And Machine Learning, Joshua Steelman, Francisco Garcia

Nebraska Department of Transportation: Research Reports

A supplemental Artificial Neural Network (ANN)-based tool was developed to support the Nebraska Department of Transportation (NDOT) in optimizing bridge management investments when choosing between refined modeling, field testing, retrofitting, or bridge replacement. Load ratings typically increase by approximately 15% to 20% when using detailed finite element analysis (FEA) instead of AASHTO approximate analysis methods. The ANN tool is implemented in an Excel spreadsheet to accept ten input parameters readily available to NDOT engineers performing typical load ratings, and predicts FEA- equivalent critical girder distribution factors (GDFs), removing unnecessary conservativism from approximate AASHTO GDFs, potentially justifying load posting removal for …

Research On School Zone Safety, Aemal Khattak, Yashu Kang

Nebraska Department of Transportation: Research Reports

This research investigated different aspects of school zone safety including the effects of speed differentials on drivers’ speeds in active school zones, the effects of school and surrounding characteristics on drivers’ speeds in active school zones, and the safety benefits and costs associated with active school zones. The research team identified 18 schools in Nebraska for data collection that consisted of drivers’ speed data, school and surrounding characteristics, and 2014-2018 reported crash data. The 18 schools were categorized by the school zone speed limit differentials: 35 to 25 mph, 40 to 25 mph, 30 to 25 mph, and 35 to …

Prototype System For Implementing The Ultrasonic Guided Wave Method On The Field, Ece Erdogmus, Eric Garcia, Michael Schuller, Ahmad Shoaib Amiri

Nebraska Department of Transportation: Research Reports

This report presents the latest improvements in a recently developed nondestructive testing (NDT) technique for early detection of various flaws such as corrosion, delamination, and concrete cracking in reinforced concrete (RC) bridge decks. The method, named Ultrasonic Guided Wave Leakage (UGWL) method by the developing authors, involves use of internal steel reinforcement (rebar) as a wave guide for transmitting ultrasonic waves through the system and the measurement of leaked energy at the surface of the concrete. This report builds upon the progress made in the previously published phases of the project (M029 and M066), and aims to further explore the …

Application Of Internal Curing To Improve Concrete Bridge Deck Performance, Arman Abdigaliyev, Yong-Rak Kim, Jiong Hu

Nebraska Department of Transportation: Research Reports

Due to the relatively high cement content and low water-to-cement ratio (w/c) used, bridge deck concrete is prone to premature cracking. Internal curing has been found to greatly reduce the chance of premature cracking as well as concrete deterioration. This research project was intended to develop internally cured bridge deck concrete based on a local mix design in Nebraska. Four different lightweight fine aggregate (LWFA) as internal curing agents were evaluated, and their effects on fresh, mechanical, durability, and shrinkage properties of concrete were studied. To identify the most effective LWFA dosage for shrinkage reduction, different replacement rates of sand …

Synthesis Of Repair Practices Of Damaged Precast/Prestressed Concrete Girders, George Morcous, Richard L. Wood, Antony Mohsen Kamal Masoud Kodsy

Nebraska Department of Transportation: Research Reports

Bridge girders are constantly subjected to various types of damage during their service life. There is currently limited knowledge or guidelines provided by the NDOT Bridge Office Policies and Procedures (BOPP) regarding the assessment and repair procedures of damaged precast/prestressed concrete girders. This report aims to develop a comprehensive repair manual for precast/prestressed concrete girders subjected to damage caused by over-height vehicular collision and damage located at the girder ends. Over-height vehicular collision damage typically occurs at the middle portion of the exterior girders and the primary concerns are focused on flexural deficiencies. Girder end damage can occur due to …

Improvement Of Low Traffic Volume Gravel Roads In Nebraska, Richard L. Wood, Yong-Rak Kim, Yijun Liao, Mohammad E. Mohammadi

Nebraska Department of Transportation: Research Reports

In the state of Nebraska, over one-third of roadways are unpaved, and consequently require a significant amount of financial and operational resources to maintain their operation. Undesired behavior of surface gravel aggregates and the road surfaces can include rutting, corrugation, and ponding that may lead to reduced driving safety, speed or network efficiency, and fuel economy. This study evaluates the parameters that characterize the performance and condition of gravel roads overtime period related to various aggregate mix designs. The parameters, including width, slope, and crown profiles, are examples of performance criteria. As remote sensing technologies have advanced in the recent …

Early Detection Of Near-Surface Void Defects In Concrete Pavement Using Drone Based Thermography And Gpr Methods, Zhigang Shen, Ece Erdogmus, George Morcous, Chngsheng Cheng, Zhexiong Shang, Theresa Mccabe, Antony Mohsen Kamal Masoud Kodsy

Nebraska Department of Transportation: Research Reports

The goal of this research is to evaluate the feasibility and the performance of using UAV-mounted infrared thermography (IRT) and ground penetration radar (GPR) to detect sub-surface voids caused by consolidation issues in concrete pavement. The motivation of the study is to identify the consolidation defects as early as the initial set of concrete to avoid having this problem in large pavement sections, which is costly and time consuming to repair. Using the two technologies in combination to detect subsurface voids in the concrete initial set stage is new and aims to take advantage of the strengths and minimize the …

Evaluation Of Tie-Bar Anchoring Methods: Non-Shrink Grout Vs. Epoxy, Wally Heyen, Lieska Halsey, Tim Krason, Brandon Varilek, David Hansen

Nebraska Department of Transportation: Research Reports

Tie bars are epoxy coated steel bars that connect the longitudinal joints in concrete pavement. Tie bars prevent faulting and joint separation between lanes Tie bars can be placed into the plastic concrete or inserted after curing by drilling and anchoring with epoxy or non-shrink grout. The specification for the tie bars requires the use of a No. 5 bar, 18 inches long and shall meet ASTM A775 / A775M [1], Section 1020.The Nebraska Department of Transportation “Standard Specifications for Highway Construction,” (Section 603.03) requires contractors to mechanically insert tie bars into the face of pavements during construction. Tie bars …

Development Of An Ndt Tool For In-Situ Assessment Of Prestress Loss, Bibo Zhong, Jinying Zhu, George Morcous

Nebraska Department of Transportation: Research Reports

The research objective is to develop a non-destructive testing (NDT) method to evaluate the prestress loss in prestressed concrete bridge girders using ultrasonic waves. The work principle is based on acoustoelastic effect - ultrasonic wave velocity varies with stress level in prestressed concrete. A self-reference test setup was proposed to measure wave velocity in two orthogonal directions (prestress and unstressed directions) in the girder. This setup will be able to reduce effects of material variation and temperature change.

The concept was first validated on small concrete specimens (cylinders and beams) in laboratory. A signal analysis algorithm was developed to reliably …

Feasibility Study Of Development Of Ultra-High Performance Concrete (Uhpc) For Highway Bridge Applications In Nebraska, Flavia Ribeiro Furtado De Mendonca, Mostafa Abo El-Khier, George Morcous, Jiong Hu

Nebraska Department of Transportation: Research Reports

Ultra-high performance concrete (UHPC) is a new class of concrete that has superior mechanical, durability, and workability properties that far exceed those of conventional concrete. To achieve these properties, a specific mix design with a very dense internal structure, fiber reinforcement, and low water-to-binder ratio (w/b) is commonly used. The goal of this research is to develop a non-proprietary UHPC mix with constituent materials that are readily available in the state of Nebraska for bridge construction applications. In developing this mix, the particle packing model is used, and an experimental study of the impact of various design parameters on the …

Development Of High-Performance Rapid Patching Materials For Pavement Repair, Gholami Shayan, Jiong Hu, Yong-Rak Kim

Nebraska Department of Transportation: Research Reports

Concrete pavements exhibiting severe distresses which require patching are commonly observed in the concrete pavement in Nebraska. Due to the requirements of opening pavement to traffic after placing the rapid patching materials, it is essential for that concrete to achieve high early strength. To ensure this, a high cement content and chloride-based accelerators are currently used in the Nebraska Department of Transportation (NDOT) Portland cement-based rapid-patching materials. Besides its associated high cost, high cement content tends to result in a less stable mix with high shrinkage, high heat of hydration, and high cracking potential. In addition, using chloride-based accelerators has …

Standard Design For Nebraska County Bridges, Chungwook Sim, Jiong Hu, Maher K. Tadros, Alexander Bleyhl, David Gee

Nebraska Department of Transportation: Research Reports

Many county-owned bridges in Nebraska need replacement due to their structural deficiency. Most of the bridges needing replacement are in the 40 to 60 ft range. This span range lacks a standard design that fits Nebraska county practices in terms of speed and simplicity of construction. The current systems being used are (a) Precast 1 by 2 ft planks which can span up to 30 ft, (b) Cast-in-place slab bridges which can span up to 50 ft but require extensive field formwork, concrete placing, and curing, and are best when constructed in three-span units, and (c) Inverted tees which can …

Condition Assessment Of Bridge Decks With Asphalt Overlay, Sepehr Pashoutani, Jinying Zhu

Nebraska Department of Transportation: Research Reports

Ground penetrating RADAR (GPR) is a widely used nondestructive testing (NDT) method for bridge deck evaluation. However, the current GPR signal and data processing software and algorithms are not able to provide comprehensive information about bridge deck condition. Although the original objective of this research project was to develop GPR analysis algorithms for condition assessment of bridge decks with asphalt overlay, the scope of work has been expanded to concrete bridge decks with or without overlays.

In this study, the research team developed a complete GPR analysis procedure that includes the following components: 1) obtain zero-time for GPR reflection at …

Precast Concrete Deck-To-Girder Connection Using Uhpc, George Morcous, Mostafa Abo El-Khier

Nebraska Department of Transportation: Research Reports

The implementation of ultra-high-performance concrete (UHPC) in bridge construction has been growing rapidly in the last two decades due to its excellent mechanical properties, workability, and durability. This report presents a new UHPC connection between precast concrete deck panels and bridge girders that eliminates changes to the design and production of girder shear connectors commonly used in conventional cast-in-place concrete deck construction. In conventional construction, girder shear reinforcement or studs are extended into the cast-in-place concrete deck to transfer interface shear and create composite section. In the new connection, girder shear reinforcement or studs are kept underneath the deck panels, …

Performance Evaluation Of Inverted Tee (It) Bridge System, Garrett P. Martindale, Daniel Watson, Antony Mohsen Kamal Masoud Kodsy, Mostafa Abo El-Khier, Richard L. Wood, George Morcous

Nebraska Department of Transportation: Research Reports

The Inverted Tee (IT) girder bridge system was originally developed in 1996 by the University of Nebraska–Lincoln (UNL) researchers and Nebraska Department of Transportation (NDOT) engineers. This bridge system currently accounts for over 110 bridges in Nebraska used for both state highways and local county roads. Extensive longitudinal and transverse deck cracking have been observed and noted in numerous bridge inspection reports. Since the IT girder bridge system is relatively new, limited data and knowledge exist on its structural performance and behavior. This study evaluates the IT girder bridge system by conducting twenty field observations as well as recording accelerometer, …

Validation Of The Mechanical Rocker Test Method For Ice Melting Capacity (Mrt-Imc), Lieska Halsey, David Hansen

Nebraska Department of Transportation: Research Reports

The anti-icing and deicing industry has interest in the development of an objective, repeatable test procedure for the evaluation and comparison of anti-icing and deicing products. Pursuant to this goal, the Nebraska Department of Transportation (NDOT) funded research at the University of Nebraska-Lincoln (UNL) to investigate methods for evaluating deicing products, beginning in 2011[1]. Researchers at UNL developed the procedure for the Mechanical Rocker Test for Ice Melting Capacity (MRT or MRT-IMC) in 2014[2].

From 2017-2019, NDOT evaluated the MRT-IMC procedure for validity and suitability as a standard test procedure for assessing deicer performance. NDOT also explored opportunities to improve …

Investigating The Interaction Of Ndot Hot-Pour Pcc Joint Sealant And Penetrating Concrete Sealers, Bruce Barrett, Dale Byre, Wally Heyen, Lieska Halsey, David Hansen

Nebraska Department of Transportation: Research Reports

Based on the field observations on NE-83, PCS potentially impacts the bond between the concrete and hot-pour sealant after application. If penetrating sealers break the interfacial bond after application, concrete pavements could become compromised and subject to freeze-thaw damage, chloride attack, and other deleterious effects.

The results show that discoloration occurred when applying the five PCS products to the NE-3405 hot-pour sealed testing blocks. All three test methods of application; spraying, 1-min, and 5-min soaks, caused discoloration. The level of discoloration increased with the duration of contact with the PCS. Despite discoloration, none of the five PCS products caused de-bonding …

Hot Applied Sealant Bond Test For Joints With Penetrating Sealers, Lieska Halsey

Nebraska Department of Transportation: Research Reports

Recently a concern has been raised for hot applied sealant bond for joints with penetrating sealers. The objective of this study will be to determine if the bond between the sealant and the concrete is compromised by the sealer currently approved to be used in Nebraska. The expected results will be that the bond is not compromised and is serving for the expected joint service life.

Assessing Passenger Car Equivalency Factors For High Truck Percentages, Jianan Zhou, Laurence Rilett, Elizabeth Jones

Nebraska Department of Transportation: Research Reports

The Passenger Car Equivalent (PCE) values in the Highway Capacity Manual (HCM) 2010 might not be valid for western Nebraska freeway conditions. This is because: 1) Interstate 80 (I-80) experiences high truck percentages (25% to 60%), while the HCM provides PCE values up to 25% of the truck percentage; 2) the average speed of trucks are observed lower than passenger cars, which is incompatible with the HCM assumption that the free speed of all vehicle types is the same at level terrain; and 3) it is unclear whether the “average” truck used in the simulation study for PCE values in …