Engineering Commons^™

Development Of A Design Tool For Biologically Inspired Fault Adaptive Design By Strategy Mapping, Nicholas Steven Huisman

Graduate Theses and Dissertations

A design tool for Biologically Inspired Fault Adaption that utilizes the concept of strategy mapping was developed and the development process and testing is presented in this paper. The concept of strategy mapping is derived primarily from the field of military theory and supposes that for any given specific problem, that there exists a specific solution for, a single strategy can be identified for that solution/problem combination. This strategy, when applied to the specific problem yields the specific solution. This specific solution is referred to as the “tactics” of the strategy. The strategy can also be directly applied to a …

The Aerodynamic And Dynamic Loading Of A Slender Structure By An Impacting Tornado-Like Vortex: The Influence Of Relative Vortex-To-Structure Size On Structural Loading, Matthew Nicholas Strasser

Graduate Theses and Dissertations

Structural loading produced by an impacting vortex is a hazardous phenomenon that is encountered in numerous applications ranging from the destruction of residences by tornados to the chopping of tip vortices by rotors. Adequate design of structures to resist vortex-induced structural loading necessitates study of the phenomenon that control the structural loading produced by an impacting vortex. This body of work extends the current knowledge base of vortex-structure interaction by evaluating the influence of the relative vortex-to-structure size on the structural loading that the vortex produces. A computer model is utilized to directly simulate the two-dimensional impact of an impinging …

Development Of Pre-Stressed Cfrp Fatigue Retrofits For Common Steel Bridge Connections, Korey Albert Pough

Graduate Theses and Dissertations

Aging or deterioration of the nation’s bridge infrastructure is a significant issue that requires attention. Causes for much of this deterioration can be attributed to two main factors, 1) corrosion, and 2) metallic fatigue, both of which work together to reduce the strength and serviceability of bridge components over time. In many instances, strengthening of bridge components using localized retrofits offers an economical and fast solution for increasing the longevity of existing steel bridges; however, such retrofits must be resilient to further corrosion and fatigue damage. In this study, a localized retrofit is developed using pre-stressed Carbon Fiber Reinforced Polymer …

Investigation Of A Numerical Algorithm For A Discretized Rubber-Belt Continuously Variable Transmission Dynamic Model And Techniques For The Measurement Of Belt Material Properties., Brian Gene Ballew

Graduate Theses and Dissertations

A numerical algorithm for modeling the dynamic response of a rubber-belt Continuously Variable Transmission (CVT) belt is recreated. The numerical attributes applied to the algorithm and difficulties with numerical stability are discussed in detail. The degrees of freedom of the system have been expanded to include the dynamics of the engine torque output and vehicle loads such as rolling resistance and aerodynamic drag. This was done to emphasize the use of the model as an analysis tool for simulating CVT/engine/vehicle response. The increased degrees of freedom require the addition of a linear dampening element between belt nodes to dampen resonance …

Application Of Polyacrylamide-Based Floc Logs For Turbidity Control At Highway Construction Sites, Kien Ngo

Graduate Theses and Dissertations

Runoff waters generated on highway construction sites can have turbidities in excess of the proposed EPA regulatory standard of 280 NTU due to large areas of exposed soil. The objective of this research was to develop best management practices (BMPs) for the use of anionic polyacrylamide (PAM) based Floc Logs, for turbidity control. Five commercially available types of PAM-based Floc Logs were evaluated in jar tests, using soil excavated from Cato Springs Research Center (CSRC, Fayetteville AR) and six types of clay from the Clay Minerals Society (Chantilly, VA). These results show that no single Floc Log type was suitable …

Investigation Of The Inherent Chemical, Structural, And Mechanical Attributes Of Bio-Engineered Composites Found In Nature: Alligator Gar’S Exoskeleton Fish Scales, Wayne Derald Hodo

Graduate Theses and Dissertations

The U.S. Army has determined a huge cost savings of up to 51% can be accomplished by reducing the gross vehicle weight, for their personnel carrier, by 33%. To cut cost, composite materials are needed. Man-made composites can have superior material properties (high-strength, high-fracture toughness, and lightweight), but they are prone to delamination at the glued-layered interface. In contrast, fish scale is a natural composite that has the same material properties and, additionally, tend not to delaminate.

The focus of this study was to learn how nature integrates hard and soft materials at each length scale to form a layered …

Storage Of Round And Square Switchgrass Bales: Effect Of Storage Time And Fungal Inoculation On Saccharification Efficiency, Noaa Frederick

Graduate Theses and Dissertations

To produce fermentable sugars from lignocellulosic biomass feedstock, severe pretreatment conditions are needed (either high acid concentration, temperature, or retention times). High severities can produce toxic byproducts which inhibit enzymatic hydrolysis or fermentation. In order to reduce pretreatment severities (and thus increase enzyme and fermentation efficiency), the white-rot fungus Pleurotus ostreastus was seeded into square and round bales of Kanlow switchgrass (Panicum virgastum L.) and left in the field over a period of 9 month. The laccase producing fungus is believed to selectively degrade lignin, a common plant structural polymer, which can function as an enzymatic inhibitor. Samples were taken …

Eicosapentaenoic Acid (Epa) From Porphyridium Cruentum: Increasing Growth And Productivity Of The Microalgae For Pharmaceutical Products, Maryam Asgharpour

Graduate Theses and Dissertations

One of the major nutritional requirements in our diet is an adequate intake of omega-3 specially eicosapentaenoic acid (EPA). In the present study, the effects of two temperatures (16°C & 20˚C) and light intensities (140 & 180µE/M2.S) and four nitrate levels (0.075, 0.3, 0.5 and 0.7g/L) on the cell growth and lipid productivity of Porphyridium cruentum, one of the most promising oil-rich species of microalgae, were investigated. A growth comparison was carried out using pure CO2 and 5% CO2/air. Additionally, the ratio of the fatty acids with omega-3 and omega-6 groups at various growth conditions were compared, since an appropriate …

Modulation Of Valve Interstitial Cell Function Through Cell Shape And Phenotype, Atefeh Razavi

Graduate Theses and Dissertations

The aortic valve is a highly dynamic structure responding to actively to the chemical, mechanical and physical cues of the valve microenvironment. Valve interstitial cells are dispersed throughout the valve tissue and play an important role in maintaining the integrity and optimum function of the valve. They are a heterogeneous population composed of various phenotype. These phenotypes have specific functions characteristic of valve physiological and pathological conditions. The effect of mechanical loading and chemical modulators on the behavior of the valve interstitial cells have largely been studied. However the role of valve interstitial cell shape as an intrinsic physical cue …

Swat Model Simulation Of Bioenergy Crop Impacts On Water Quality In Cache River Watershed, Eeshan Kumar

Graduate Theses and Dissertations

Energy security through increased biofuel production is one of the components of the Energy Independence and Security Act (EISA) 2007. As per EISA 2007 mandate, appropriate independent research institutes are required to assess concerns to natural biodiversity due to biofuel production and report it to the Congress through the Environment Protection Agency (EPA). Planners, researchers, and agencies concerned with environmental regulations, ideally, would like to have location-specific information about the impacts for developing appropriate management interventions. This study examines long-term impacts on water quality in response to targeted (i.e. marginal lands) production of biofuel crops by setting up two SWAT …

Image Processing And Visualization Of Terahertz Pulsed Imaging Of Breast Cancer Tumors, Yuhao Wu

Graduate Theses and Dissertations

Terahertz imaging technology has grown substantially in recent years. With new advances made in the generation, manipulation, and detection of terahertz radiation, terahertz imaging has found its application as inspection tools in a wide range of areas including biomedicine, materials science, and aerospace industries. In the field of medical imaging, terahertz (THz) has emerged as a new imaging modality due to some fundamental physical properties of the THz wave. THz imaging has been used to examine various biological structures, and THz tomography has been developed to probe the 3D structures of those samples.

THz pulsed imaging (TPI) is one of …

Evaluation Of Conservation Practices Through Simulation Modeling And Tool Development, Gurdeep Singh

Graduate Theses and Dissertations

For the first objective, predicted impacts of selected Mississippi River Basin Initiative (MRBI) conservation practices (CPs) on sediment and nutrient loss were assessed. The study area was L’Anguille River Watershed (LRW), a priority focus watershed of the MRBI program and the simulated CPs were filter strip, critical area planting, grade stabilization structure, irrigation land leveling, irrigation pipeline, irrigation water management, and nutrient management. The Soil and Water Assessment Tool (SWAT) model was calibrated (1998 – 2005) and validated (2006 – 2012) for flow, sediment, total phosphorus (TP), and nitrate-nitrogen (NO3-N) at the Colt site (503 sq. km. drainage area) and …

Design And Development Of A Wearable Wireless Health Monitoring System: A Smart Watch Approach, Keerthi Paranikumar

Graduate Theses and Dissertations

According to Statistics, every year, about 610,000 people die because of heart disease in United States of America. (i.e. 1 in every 4 deaths.*) Heart disease is common for both men and women. Annually, about 370,000 people die because of coronary heart disease, which is the most common type of heart disease [1]. About 735,000 Americans have heart attack every year. In this, 210,000 people gets heart attack who already has heart problems and 525,000 people get heart attack for the first time [2]. Not many people know that they have heart problems. Around 47% of the people in United …

Epitaxial Growth Of Si-Ge-Sn Alloys For Optoelectronic Device Application, Aboozar Mosleh

Graduate Theses and Dissertations

Microelectronics industry has experienced a tremendous change over the last few decades and has shown that Moore’s law has been followed by doubling the number of transistors on the chip every 18 months. However, continuous scaling down of the transistors size is reaching the physical limits and data transfer through metal interconnects will not be able to catch up with the increasing data processing speed in the future. Therefore, optical data transfer between chips and on-chip has been widely investigated. Silicon based optoelectronics has received phenomenal attention since Si has been the core material on which microelectronic industry has been …

Model Development And Validation For Wind Generation Transmission Systems, Mahmood Shihadeh Saadeh

Graduate Theses and Dissertations

In this research a new benchmark system is proposed for wind energy transmission systems. New model development, validation, and calibration methods for power transmission systems are proposed and implemented as well. First, a model reduction criteria is chosen based on electrical interconnection and geographical information. Model development is then done using reduction techniques on an operation model provided by a transmission operator based on the chosen criteria. Then model validation is performed using actual PMU synchrophasor measurements provided by a utility company. The model development and validation process ensures the accuracy of the developed model and makes for a realistic …

Field Amplified Sample Stacking On Amyloid Beta (1-42) Oligomers Using Capillary Electrophoresis, Sadia Ali Paracha

Graduate Theses and Dissertations

According to recent literature, it is believed that the oligomeric form of amyloid beta (Aβ) is the leading cause of Alzheimer’s disease (1; 8; 10; 12-18). Additionally, recent studies have eluded to the impact of Alzheimer’s disease (AD) both economically and Socially in today’s society where an increase of about 71% of AD related deaths were recorded between 2000 and 2013 (7). Since the oligomeric forms of Aβ vary in size, shape and some believe conformation, it is vital to utilize a separation technique, such as capilllary electrophoresis (CE) to further understand Aβ aggregation. By understanding Aβ aggregation, treatment of …

Effects Of Magnetically Induced Micro-Mixing On Nanofiltration Performance, Guanghui Song

Graduate Theses and Dissertations

Nanofiltration (NF) is a relatively new membrane separation process mainly used for removing low molecular weight species from aqueous and non-aqueous solutions. NF membranes suffer from concentration polarization leading to membrane fouling thus compromised membrane performance. Magnetically responsive nanofiltration (NF) membranes functionalized with superparamagnetic nanoparticles (SPNs) attached to the chain ends of grafted polymer nanolayers have been shown to be effective in breaking concentration polarization at the membrane-liquid interface under an appropriate external oscillating magnetic field. Under an oscillating magnetic field, the movement of the polymer chains acts as micro-mixer leading to the suppression of concentration polarization and improved filtration …

Compounds Released From Biomass Deconstruction: Understanding Their Effect On Cellulose Enzyme Hydrolysis And Their Biological Activity, Angele Djioleu

Graduate Theses and Dissertations

The effect of compounds produced during biomass pretreatment on cellulolytic enzyme was investigated. Liquid prehydrolyzates were prepared by pretreating switchgrass using 24 combinations of temperature, time, and sulfuric acid concentration based on a full factorial design. Temperature was varied from 140°C to 180°C; time ranged from 10 to 40 min; and the sulfuric acid concentrations were 0.5% or 1% (v/v). Identified products in the prehydrolyzates included xylose, glucose, hydroxymethylfurfural (HMF), furfural, acetic acid, formic acid, and phenolic compounds at concentration ranging from 0 to 21.4 g/L. Pretreatment conditions significantly affected the concentrations of compounds detected in prehydrolyzates. When assayed in …

Modified Polysulfone Nanofiltration Membrane Synthesis For Hydraulic Fracturing Water Recycle, Blake Alexander Johnson

Graduate Theses and Dissertations

The use of hydraulic fracturing has resulted in significant increases in the yield of oil and natural gas, as water pumped into wells at high pressure cracks the formations and releases the hydrocarbons that are locked in the rocks. This process has created large volumes of brackish water that is very difficult to process and is often disposed of into injection wells. Suspended solids and some dissolved solids are more readily removed, but the multivalent ions found in certain salts can precipitate in a well and complicate the reuse of flowback in future hydraulic fracturing operations.

Nanofiltration, a membrane separation …

Production Of Ethanol From Cereal Food Fines Using Dilute-Acid Hydrolysis, Andrew Edward Arnett

Graduate Theses and Dissertations

Cereal food fines are a leftover by-product from breakfast cereal processing that is typically sold as animal feed or used as a pet food ingredient; however this product could be of greater value as a feedstock for the production of fuel ethanol via fermentation. In order for this material to be fermented it has to be broken down in to simple sugars using hydrolysis. One method of hydrolysis is called dilute-acid hydrolysis, whereby low concentrations of acid are added to the feedstock to facilitate the breaking of chemical bonds. This study investigates the effect of different concentrations of acid to …

Wireless Monitoring Of Driver's Pulse Rate And Temperature Using Hand Gloves Approach, Rohith Reddy Narala

Graduate Theses and Dissertations

There is growing concern about dangers correlated with driving, for people with known cardiovascular diseases. However, the association between having a chronic cardiovascular disease and being involved in a motor vehicle crash remains controversial. This study aims to monitor people with known medical emergencies or other medical conditions while driving [1]. It also helps the co-passengers to be cautious while the person is driving with an abnormal health condition. Designed it to be convenient and also can be easily adaptable by the end user.

The proposed project focuses on a wearable sensor glove that equipped with a pulse rate sensor, …

High-Frequency Transformer Design For Solid-State Transformers In Electric Power Distribution Systems, Roderick Javier Garcia Montoya

Graduate Theses and Dissertations

The objective of this thesis is to present a high- or medium-frequency transformer design methodology for Solid-State Transformer (SST) applications. SSTs have been proposed as a replacement of the traditional 50/60 Hz transformer in applications demanding high-power density. Moreover, due to the high penetration of distributed generation, DC grids, energy storage systems, and sensitive loads, SSTs have been considered as an enabling technology for envisioned future energy systems. These applications demand additional functionalities that may not be achieved with traditional transformers. For example, active power flow control, harmonic suppression, voltage regulation, voltage sag compensation, and reduced size and volume.

In …

Modeling Radiation Heat Transfer For Building’S Cooling And Heating Loads: Considering The Role Of Clear, Cloudy, And Dusty Conditions In Hot And Dry Climates, Salem Ahmed Algarni

Graduate Theses and Dissertations

The influence of transient factors such as sky long wave radiation exchange and atmospheric aerosols (i.e., smog, and dust – made up of sand, clay, and silt) are not carefully considered in current building design and simulation models. Therefore, the research objective was to better understand and account for such variables, resulting in improved radiative predictive capabilities, especially important for hot and dry climates under different sky conditions including clean, cloudy, and dusty. Overall, results of this dissertation provided a better prediction method for sky long wave radiation exchange with a building’s roof and the impact of dust accumulation on …

Traction-Separation Relationships For Hydrogen-Induced Grain Boundary Embrittlement In Nickel Via Molecular Dynamics Simulations, Wesley Allen Barrows

Graduate Theses and Dissertations

The deleterious effects of atomic and molecular hydrogen on the mechanical properties of metals have long been observed. Although several theories exist describing the mechanisms by which hydrogen negatively influences the failure of materials, a consensus has yet to be reached regarding the exact mechanism or combination of mechanisms. Two mechanisms have gained support in explaining hydrogen’s degradative role in non-hydride forming metals: hydrogen-enhanced localized plasticity and hydrogen-enhanced decohesion. Yet, the interplay between these mechanisms and microstructure in metallic materials has not been explained. Accordingly, for this thesis, the three main objectives are: (i) to develop a numerical methodology to …

Swelling-Etching Characterization Of Copper (I) Oxide - Pdms For The Development Of Micro/Nano - Particles Composite Mems Corrosion Sensor, Abdoul Kader Maiga

Graduate Theses and Dissertations

The primary objective for this thesis is to contribute to the understanding of the oxide removal process for a corrosion sensing device. The goal for designing such a device is for monitoring corrosion on metallic structures. The sensing material (6.35mm x 1mm discs) of the device is composed of copper (I) oxide particles mixed in some polydimethylsiloxane (PDMS). The PDMS, “housing,” is meant for controlling the oxidation rate through the sensing material. A solvent was used to facilitate the etchant diffusion through the PDMS matrix. Toluene and acetic acid were the ideal solvent and etchant, respectively, for carrying out the …

Creating Quality Metrics For The Capital Facilities Delivery Industry, Kelsey D. Lamb

Graduate Theses and Dissertations

A standard for industry-wide quality metrics, similar to safety metrics, for the capital facilities delivery industry is investigated and developed with the goal to motivate industry-wide adoption of this new quality metric program. A survey of the literature found key differences between capital facilities and other industries, mainly that other industries focus on the quality of the product while capital facilities focus on maintaining the cost and schedule of a project. Creating a framework that can be used across the industry can potentially lead to uniform improvement of quality for the entire industry. Quality is defined for the capital facilities …

Preventive Maintenance Decision Modeling In Health And Service Systems, Mahboubeh Madadi

Graduate Theses and Dissertations

This dissertation focuses on the preventive maintenance decision modeling in healthcare and service systems. In the first part of this dissertation, some issues in preventive health decisions for breast cancer are addressed, and in the second part, the required characteristics for preventive maintenance of an unreliable queuing system are derived.

Adherence to cancer screening is the first issue that is addressed in this dissertation. Women’s adherence or compliance with mammography screening remained low in the recent years. In this dissertation, we first develop a design-based logistic regression model to quantify the probability of adherence to screening schedules based on women’s …

A Computational Study Of The Potential For Lng Tanker Polystyrene Foam Insulation Failure Under Fire Exposure, Jeffrey David Martinez

Graduate Theses and Dissertations

Liquefied natural gas is shipped across the oceans in large marine carriers. The carriers house the LNG using several different insulation systems. One of these systems involves large aluminum spheres insulated with polystyrene foam. Polystyrene foam is very susceptible to heat degradation. This raised issues as to the extent of possible insulation failure caused by a large ship fire. Experiments were done investigating the nature of polystyrene’s thermal degradation, notably by Brauman, Chen, and Matzinger and Butler. A large scale investigation was also performed by Sandia National Laboratory. However, computational modeling of the degradation was lacking. This work set out …

Understanding Technology Diffusion And Spatial Accessibility In The Home Healthcare Industry, Mehmet Serdar Kilinç

Graduate Theses and Dissertations

Home healthcare is becoming an important alternative to institutionalized care. It not only reduces costs but also increases health outcomes and patient satisfaction. However, the availability and efficiency of home healthcare services need to be improved as the aging population increases in the US. Hence, understanding home healthcare utilization and access are the essential steps to develop strategies ensuring effective and sustainable services to patients.

This research aims to study two main issues in the US home healthcare system: diffusion and long-term impacts of home telehealth and potential spatial accessibility of home healthcare services. Home telehealth is a promising technology …

An Adaptive Large Neighborhood Search Heuristic For The Inventory Routing Problem With Time Windows, Mina Hadianniasar

Graduate Theses and Dissertations

This research addresses an integrated distribution and inventory control problem which is faced by a large retail chain in the United States. In their current distribution network, a direct shipping policy is used to keep stores stocked with products. The shipping policy specifies that a dedicated trailer should be sent from the warehouse to a store when the trailer is full or after five business days, whichever comes first. Stores can only receive deliveries during a window of time (6 am to 6 pm). The retail chain is seeking more efficient alternatives to this policy, as measured by total transportation, …