Methods For Film Coating Electrospun Fibers, Kristopher Dejean

Williams Honors College, Honors Research Projects

Electrospinning uses high voltages to form polymer nanofiber membranes. These membranes have potential for use in filtration, tissue engineering, drug delivery, and catalysis. The nonwoven fiber mat is malleable but has a low tensile strength compared to a solid film of the same polymer. Joining the fibers with a thin film is desired to balance the strength and flexibility. Three methods of producing a film on fiber membrane were tested. The techniques are spraying then melting, spin coating, and dip coating. Electrospinning setup conditions, solvent ratios, damage to fibers, and spin coating speeds were determined. Research was abruptly stopped and …

Methods For Film Coating Electrospun Fibers, Kristopher Dejean

Williams Honors College, Honors Research Projects

Electrospinning uses high voltages to form polymer nanofiber membranes. These membranes have potential for use in filtration, tissue engineering, drug delivery, and catalysis. The nonwoven fiber mat is malleable but has a low tensile strength compared to a solid film of the same polymer. Joining the fibers with a thin film is desired to balance the strength and flexibility. Three methods of producing a film on fiber membrane were tested. The techniques are spraying then melting, spin coating, and dip coating. Electrospinning setup conditions, solvent ratios, damage to fibers, and spin coating speeds were determined. Research was abruptly stopped and …

A Comparison Of Fiber Mat Thickness Measurement Techniques Using Laser Interferometry And Water Displacement, Ryan Seabeck

Williams Honors College, Honors Research Projects

Polymer fiber mats may often be very thin which leads to complications in measuring thickness. The thickness of fiber mats, however, is crucial in understanding their behavior. Thickness affects how well the mat works as a filter as well as the pressure drop across the mat, and herein lies the need for accurate measurement techniques. Currently two of the available techniques for measuring mat thickness are by laser interferometry[1] and by buoyancy force when submerged in water[2]. Instead of measuring the buoyancy force in this experiment, an enclosure intended to measure the thickness via water displacement was …

Developing A Portable Prototype To Utilize An Electrospun Colorimetric Sensor For The Detection Of Trihalomethanes In Water, Amanda Svensson

Williams Honors College, Honors Research Projects

Trihalomethane (THM) detection in water is important due to the potential health effects caused by their presence, including increased cancer risk. A cheap, quick, and portable method of identifying THM concentration at the Environmental Protection Agency limit of 80 parts per billion (ppb) will improve detection and water treatment. Electrospinning was used to make nanofiber membranes using a 2.6 wt% polypropylene solution. These membranes were utilized in the Fujiwara reaction, which creates a color change in the presence of THMs, to detect the THM bromoform in water. The color intensity of the reaction was quantified for 250 and 80 ppb …

Correlation Of Electrospun Polyvinylpyrrolidone Fiber Mat Thickness With Basis Weight, Fiber Diameter, Pore Size Distribution, And Air Permeability, Leah Mcpherson

Williams Honors College, Honors Research Projects

This project developed correlations between electrospun polyvinylpyrrolidone fiber mat thickness, basis weight, fiber diameter, pore size, and air permeability. The hypotheses were thinner fibers produce thicker mats, pore size decreases with fiber diameter, pore size and permeability decrease as basis weight increases. Project results could be used for modeling or quality control purposes.

Fiber diameter distributions were analyzed using a Scanning Electron Microscope and FibraQuant 1.3 software. Four conditions were chosen for further study: 0.284 ± 0.104 µm, 0.379 ± 0.128 µm, 0.520 ± 0.138 µm, and 0.733 ± 0.177 µm. Lower PVP concentrations produced thinner fibers.

Sample thickness (nm) …

Construction Of Polyurethane Fabric Nanocomposites For Use In Resistance Temperature Detectors-Effect Of Polyurethane Concentration, Multi-Walled Carbon Nanotubes, And Oxidant, Jordan M. Shaffer

Williams Honors College, Honors Research Projects

Current resistance temperature detectors (RTDs) are rigid and create pressure points when used in contact with the human body. The current RTDs can also not be used in confined areas like the inside of a prosthetic. The research done for this paper explores the possibility of creating a soft fabric like RTD that can accurately measure temperature. This RTD could be used in medical devices, be placed in prosthetic legs, and be worn for a long period of time creating no discomfort for the user. Polyurethane scaffolds were created through an electrospinning process and multiwalled carbon nanotubes were adhered to …

Effect Of Nanofiber Morphology On Pvdf Air Filter Performance, Andrew W. Marton

Williams Honors College, Honors Research Projects

Poly(vinylidene fluoride) (PVDF) can be formed into small nanofibers by electrospinning that are useful for a variety of applications. Air filters produced with PVDF are known to capture ionic particles with high efficiency. Existing studies have focused on the effects of electrospinning conditions on nanofiber morphology. In this study fibers were generated with varying morphologies. Air filters were then made from each sample and then characterized by TSI. Air filters were found to have increased resistances relative to their capture efficiencies according to particle diameter. Capture efficiencies did not correlate strongly with particle diameter, and the presence of beads in …

Reusable Adhesive Tapes From Electrospun Polymer Fibers, Vishal K. Chaurasia

Williams Honors College, Honors Research Projects

Many emerging applications demand an adhesive that has reusable properties. The adhesive must exhibit high adhesion strength to various surfaces and be able to be removed easily and then reapplied with minimal to no loss in adhesion strength. This work aims to tackle this problem by creating an adhesive tape fabricated by electrospinning polymer solutions onto a substrate. Electrospun adhesive nano/micro fibers have the ability to display the reusable characteristics desired. Several adhesive custom formulations were first developed and optimized for electrospinning. Then these formulations were successfully electrospun on to various substrates after much fine tuning of electrospinning parameters. The …

Nylon-6 Fabric Nanocomposite Resistance Temperature Detectors - Effects Of Oxidant, Mwcnt, And Nylon-6 Concentration, Rebecca Howdyshell

Williams Honors College, Honors Research Projects

Abstract

The purpose of this honors project is to construct and test temperature detectors, which can be used for the advancement of exercise devices, prosthetic sockets, or medical applications. Resistance Temperature Detectors (RTDs) are an effective way to measure temperature due to the dependence of the RTD material’s resistance on temperature. The focus of this project was to develop an RTD for prosthetic socket or exercise applications, where the RTD is in close contact with the skin of the user. Generally, RTDs are constructed from platinum, copper, or nickel. However, metal RTDs have a tendency to be large and rigid, …

Electrospinning Of S-B-S Triblock And S-I-S Triblock Copolymers For Use In Fuel Filtration, Kevin Houser

Williams Honors College, Honors Research Projects

The following research project looked into the potential of using nanofibers of syrene-isoprene-styrene triblock copolymer produced through the electrospinning process for the filtration of water out of fuel as well as a comparison of styrene-isoprene-styrene triblock to the styrene-butadiene-styrene triblock nanofibers produced at equivalent operating parameters. Based on the work completed, it is concluded that the styrene-isoprene-styrene triblock is not suitable for use in filtration with the current electrospinning conditions. On average, the styrene-isoprene-styrene triblock produced nanofibers of lower average diameter and lower standard deviation in diameter when compared to styene-butadiene-styrene triblock.

Biosurfactants In Electrospinning, Jonathan Russell

Williams Honors College, Honors Research Projects

Surfactants are useful in electrospinning to help improve the fiber morphology. Crocin is a naturally occurring biosurfactant from saffron that is highly soluble in water. By electrospinning a biocompatible polymer, such as polyethylene oxide (PEO) and Crocin, one can improve the fiber morphology. A systematic study of PEO was conducted by varying the voltage, flow rate, and gap distance. The viscosity of the solution was determined using a viscometer and the surface tension was determined using the pendant drop method. Fiber morphology was examined using SEM and fiber diameters were determined using ImageJ to measure the fibers in the SEM …