Operational And Water Quality Analysis For The City Of Akron's Water Treatment Plant And Distribution System, Chelsea James

Williams Honors College, Honors Research Projects

Chlorination is one of the most common methods of treating pathogens and ensuring microbial water quality in water treatment and distribution. As chlorinated water leaves the source and travels through the water distribution system, the chlorine reacts with both the organic compounds (dissolved organic carbon, DOC) in the source water and the corrosion or biofilm of the pipe walls. The chlorine concentration, or chlorine residuals, at any point in the water distribution system is a good measure of water quality. At the same time, chlorination produces disinfection byproducts as the chlorine also reacts with other naturally-occurring materials in the water. …

Protein Sequence-Structure-Function Relationship: Testing Ke-50 Modification On Recombinant Green Fluorescent Protein (Acgfp), Anna E. Burkey

Williams Honors College, Honors Research Projects

Protein modification shows promise for improving the effectiveness of protein therapy, including the use of Interferon-beta-1b for the treatment of multiple sclerosis. The addition of a chain of 50 lysine and glutamic acid residues (also called a KE50 modification) was tested on green fluorescent protein (AcGFP) to determine its effect on the bioactivity of the protein. Standard transformation protocol was used to grow the normal and modified proteins in E.Coli, and the bioactivity of the protein was measured using quantum yield and extinction coefficients to determine the reduction in brightness from the native form to the modified form. The …

Calcium Alginate Microbead Production Via An Air Assisted Shearing Process, Ryan Loftus

Williams Honors College, Honors Research Projects

The purpose of this project was to model the size of calcium alginate microbeads produced by extruding a solution of 1.5 wt.% alginate from a syringe and needle with air shear generated from a pneumatic line flowing in an annular tube around the extrusion needle. The air shear would create microdroplets that would fall into a solution of 2 wt.% calcium chloride in water, crosslinking the droplets into beads. These microbeads can be used in drug dispersion applications or in encapsulation of cells throughout the body due to their biocompatibility. The goal was to create uniform beads that ranged from …

Nfpa 2015/2016 Chainless Challenge, Andrew Tupta, Stefan Stamboldziev, Sean Catchpole, Jordon Spence, Andrew Ball

Williams Honors College, Honors Research Projects

Parker Hannifin has issued a challenge to student design teams of creating a Chainless bike using a hydraulic system. Each student design team will be assigned a technical advisor from the University. The project will be divided into two phases after the initial kickoff. The first phase will align with senior design course for motion control and hydraulics and will yield the student obtaining knowledge in hydraulics, including bio-degradable fluids, pneumatics, electromechanical systems, green technologies (sustainable energy) and controlling force and motion. Students will be provided data sheets, a list of in-stock Parker components and by the end of the …

Pediatric Electrical Stimulation For Limb Lengthening: A Non-Invasive Approach, Corey J. Schurko, Sofia Chinchilla, Amanda E. Pinheiro, Jacob A. Brock

Williams Honors College, Honors Research Projects

Leg Length Discrepancy (LLD) is a problematic ailment for children as the differences in limb lengths can lead to scoliosis, hip, knee, and ankle problems, and back pain. If LLD is untreated, the symptoms will worsen as the child matures. Today LLD is corrected by using the Ilizarov Method, which uses pins that are externally attached to the broken bone for extension over time using a fixator or by using internal plates that do not require externalization. In our project we aim to use external electrical stimulation to correct the limb discrepancies. Several companies, such as Zimmer Biomet, have created …

Impacts Of Water Sources On The Effectiveness Of Point-Of-Use Water Treatment, Robert Brophy

Williams Honors College, Honors Research Projects

Disinfection of drinking water provides a safe, reliable, and clean water supply and has been protecting public health successfully throughout the 20th century. However, factors such as deteriorating infrastructure, introduction of microbial pathogens, or disinfection byproducts create problems and reduce the effectiveness of a drinking water treatment plant. Every day the public is drinking known carcinogens that are regulated by the EPA and tested for quarterly by treatment plants. To combat rising costs involved with upgrading source water treatment, point-of-use treatment is a popular option that treats water as it leaves the distribution system instead of being treated before discharge. …

Hydroband: The Continuous Hydration Monitoring System, Karina E. Atkinson, Catherine P. Benedict

Williams Honors College, Honors Research Projects

Dehydration is defined as a mild, moderate, or extreme loss of water in the body. It can result in fever, muscle cramps, headaches, dizziness, or heat stroke in athletes. Ways to determine hydration levels include analysis of the urine, blood, or sweat, body weight changes, skin elasticity tests, and increases in core temperature. Patent search, research journals, and outside studies in the health and fitness market showed that a convenient and continuous hydration monitoring system was not available. Changes in core body temperature proved to be the quickest way to measure hydration levels. The HydroBand system is geared towards athletes …

Smart Tail-Light System, Julia Wood, Donald G. Haiss

Williams Honors College, Honors Research Projects

According to the National Highway Traffic Safety Administration (NHTSA) Safety Vehicle Research, 29% of all vehicle accidents are rear end collisions. Many are a result of failure to respond to a slowing or stopped vehicle. [1] The purposed LED rear lighting system will incorporate attention getting techniques to increase vehicle visibility to other drivers. Due to the small size and stature of the 2015 human powered vehicle called Joey, it will be out of the ordinary when traveling on roadways. “Three in four (72%) bicyclists who rode after dark said they tried to do something to make themselves more visible.” …

Investigation Of Degradation Of Amine Sorbent, Elijah Arendt

Williams Honors College, Honors Research Projects

The purpose of this study is to investigate the performance of amine-grafted sorbents, specifically when they are degraded at 120°C. This study varied the amine source and the amount of it in the sorbent. The additive type and the amount of it was also manipulated. The performance of sorbents is characterized by CO₂ capture capacity, which is the amount (in mmol) of CO₂ captured per gram of sorbent at 40°C. The best performing sorbents are ones that maintain their CO₂ capture capacity after degradation. When the amount of additive was manipulated, the sorbents containing 2% b.w. and …

The Effect Of Drying On The Release Of Small Hydrophilic Molecular Drugs From Polyelectrolyte Complex Beads, Dounsavanh Letdara

Williams Honors College, Honors Research Projects

The effects of bead composition and dryness on the release rate of small molecules, like a drug or dye, from polyelectrolyte complex (PEC) beads were studied. Release studies were performed on dried and not dried beads prepared using different PEC to drug ratios. The beads were dried for two hours, which allowed them to reach a constant weight. The beads were loaded with a dye, so their release could be detected through the visible light regime. A plate reader was used to determine the absorbance of a sample, and then the amount of dye released was determined. The data presented …

An Exploration Of Structural Timber Innovation, Simon Beskitt

Williams Honors College, Honors Research Projects

In many undergraduate programs of study, civil and structural engineering students are exposed to introductory material regarding timber construction. The information received in the undergraduate experience typically consists of a brief summary of the basic mechanical properties of wood but does not significantly cover timber design. Much greater emphasis is placed on design practices involving steel and concrete, likely due to their prominence in contemporary building trends in civil engineering. While it is true that wood is one of the older materials in terms of its utilization in structural and architectural design, it is certainly not an antiquated choice. Wood …

Passivation And Potential Fluctuation Of Az31b Alloy In Alkaline Environments, Ana C. Bacco

Williams Honors College, Honors Research Projects

Magnesium (Mg) alloys are used in many industries because of their distinctive properties, but their high chemical reactivity and poor oxide film protection make them inferior. This project focused on investigating the effects of secondary phases and intermetallic particles (IMPs) on the corrosion behavior of AZ31B Mg alloy. The test solution was chloride free NaOH with varying pH levels between 10-14, as well as testing under deaerated conditions. The open circuit potential (OCP) measurements using AZ31B in static NaOH solutions showed potential fluctuation between approximately -1.6 V_SCE (active state) and -0.4 V_SCE (passive state) during the 24-h immersion. …

Prediction Of Vapor/Liquid Equilibrium Behavior From Quantum Mechanical Data, Marshall J. Gnap

Williams Honors College, Honors Research Projects

MOSCED (Modified Separation of Cohesive Energy Density) is a particularly attractive model for activity coefficients because it offers intuitive insights into how to tune solvent-solute interactions to achieve optimized formulations. Unfortunately, only 133 compounds have been characterized with the MOSCED method. Furthermore, there is no convenient method for extending MOSCED predictions to new compounds. The hypothesis of the present research is that the surface charge density of a molecule, once normalized over the molecule surface area, provided graphically by a σ-profile from density functional theory (DFT) computations, can be used to estimate the parameters used in the MOSCED model. DFT …

Smart Coffee Table, Matthew Owens

Williams Honors College, Honors Research Projects

This report documents the process I followed while working on my senior design project. It includes how I decided to build a Smart Coffee Table, my engineering process, the design of all features and mechanical components, relevant research necessary to complete the project, the performance of the structures, the methods for controlling and powering the table, and any problems along the way. Over the course of the last two semesters, I learned valuable lessons pertaining to working on a project from start to finish as an individual rather than in a group.

Motorcycle Helmet Crash Detection/Prevention System, David Witsaman

Williams Honors College, Honors Research Projects

This project proposes a motorcycle safety system that increases safety by actively helping to prevent crashes while also helping in the case that an accident does occur. The system actively helps prevent accidents by keeping the user’s eyes on the road with three additions to the typical helmet. The helmet has a heads-up-display (HUD) containing the speed of the motorcycle and turn-by-turn directions. Instead of tilting their head down the user can see their speed and directions by moving their eyes which will keep the road in their field of view. Blind-spot detection increases the user’s overall awareness of their …

Emlighten, Emily Mulvany

Williams Honors College, Honors Research Projects

This project is focused on creating a system to increase patient satisfaction in hospitals. My senior design team has been working hand in hand with the emergency department of Akron General to design this system called EMlighten. The goal is to create an experience for patients where they exit the hospital feeling more satisfied than they currently are. Patient satisfaction is a key performance indicator used by many hospitals to determine how much additional funding each hospital department is granted. If patients feel more satisfied, not only is that indicative of better care, but departments will receive extra funding. EMlighten …

Developing The Stress Strain Curves For An Epoxy Undergoing High Speed Impact, Stanford L. Howdyshell 7867559

Williams Honors College, Honors Research Projects

The Hopkinson Split Bar test can be used to accurately develop the relationship between the stress and strain a material undergoes during a high speed impact (rates of 1000/s). This information has many industrial uses, for example the auto industry can use this technology to analyze how materials will behave under crash-like circumstances. In this experiment the stress-strain curves were developed for the PC-Plumbing epoxy.

One of the variables that can be adjusted in the Split Hopkinson Bar test is the ration between the height of the sample and the width of the sample (Hs/Ds). This experiment investigated how three …

2016 Fsae Electric Vehicle Pedal Assembly Design, Evan Beery

Williams Honors College, Honors Research Projects

The purpose of this project was to design and produce the pedal box assembly for the electric formula SAE racecar team’s 2016 racecar. To complete this project, a working 3D model and corresponding blueprints were created. Materials were selected, machined, and assembled. FEA software was used to verify the design. The final step was manufacturing and assembling all the components together and placing them in the racecar. The precision machining was completed on campus at the University of Akron, and was considered a vital measurable of the project.

This assembly allows for the actuation of two aluminum pedals. One pedal …

Rocket Fin Test Fixture Development & Exploration Of Rotation Inducing Fin Design, Ryan A. Saylor Mr., David J. Royak Mr., Jacob P. Byron Mr.

Williams Honors College, Honors Research Projects

The purpose of this senior project was to develop a method of applying rotation inducing rocket fin concepts to rockets for the benefit of the University of Akron Akronauts; the student led rocket design team. The project was performed independently of the team’s current efforts as a research and development endeavor for future team projects. Main project goals were divided into three parts: design a fin test fixture for verification testing in the University’s wind tunnel, develop a parameter-driven software model that could be used to generate design options with theoretical performance data as an output, and run fluid dynamics …

Pothole Reporting System, Alissa L. Mcgill, Brian G. Simmons, Sean D. Querry, Elizabeth J. Hammell

Williams Honors College, Honors Research Projects

The purpose of this project is to create a pothole detection device that can be attached to the underside of a commercial vehicle. Potholes cost motorists around 6.4 billion dollars annually, thus demonstrating the need for a system to aid with the detection and reporting of potholes. The four systems we needed to consider for the implementation of this project were the power system, the sensing system, the data processing system, and the reporting and logging system. Power pulled from the vehicle will enable the sensors and data processing module. The data processing module will analyze the readings from the …

Roobockey "Autonomous Hockey Robot", Keith R. Martin, Troy W. Bowers, Deboshri Sadhukhan, John A. Supel

Williams Honors College, Honors Research Projects

The goal of the ROOBockey project is to design and construct a floor hockey robot that can competitively shoot a puck. The robot design quickly locates a specific beacon through the use of image processing and uses a pneumatic shooting mechanism to send a puck to a specified target. The beacons act as possible player or goal positions in a hockey game. The robot also utilizes a wireless controller device to allow a user to maneuver the robot across a hockey field.

Rubber Roads For The Rubber City: Testing The Suitability Of Rubberized Asphalt For Roads In Northeast Ohio, Jessica M. Fraser

Williams Honors College, Honors Research Projects

This research paper explores the benefits of using rubberized asphalt concrete (RAC) versus normal asphalt concrete (NAC) and why it is environmentally important. New road construction and repair of roadways due to potholes are always occurring in Northeast Ohio. Recently, the city of Akron’s transportation budget has increased, which includes projects such as reconstructing asphalt and resurfacing pavements throughout the city of Akron. Using rubberized asphalt may improve the quality of our roads and reduce roadway degradation which will likely save cities money.

Using rubberized asphalt recycles old tires, which do not decompose, and creates a positive use for them …

Titan Wireless Camera Control System, Matthew J. Trowbridge, Ian Drake, Samuel Davis, Ognjen Krco

Williams Honors College, Honors Research Projects

The Titan Camera Control System is an eletromechanical device that allows the user to wirelessly control a camera’s digital operations as well as physical orientation through the use of a mobile device application. The Titan system accepts input in the form of virtual user commands on the mobile app and performs system output in the form of sending photos/video from the camera back to the app as well as changing the orientation of the camera in accordance with the user’s commands.

Economical Retrofit System To Reduce Cooking Emissions In Third World Dwellings, Jonathan Vanzummeren, Tyler Sturgeon, Ben Dalessandro

Williams Honors College, Honors Research Projects

Abstract:

The purpose of this document is to propose and demonstrate the feasibility and effectiveness of substituting an open flame biomass cooking process with a closed system with the capabilities of sustaining an adequate fire. Clay ovens or “chulhas” are the traditional piece of cooking equipment used in poorer areas of the world. They are often built inside cramped one-room housing units with little or no ventilation. The emissions released from burning fuel sources such as wood, coal, or animal waste bring with them detrimental and often fatal health problems and results in approximately 1.3 million deaths per year.

The …

Nfpa 2015/2016 Chainless Challenge Project Report, Andrew Tupta, Andrew Ball, Stefan Stamboldziev, Jordon Spence, Sean Catchpole

Williams Honors College, Honors Research Projects

Parker Hannifin has issued a challenge to student design teams of creating a Chainless bike using a hydraulic system. Each student design team will be assigned a technical advisor from the University. The project will be divided into two phases after the initial kickoff. The first phase will align with senior design course for motion control and hydraulics and will yield the student obtaining knowledge in hydraulics, including bio-degradable fluids, pneumatics, electromechanical systems, green technologies (sustainable energy) and controlling force and motion. Students will be provided data sheets, a list of in-stock Parker components and by the end of the …

Construction Of Polyurethane Fabric Nanocomposites For Use In Resistance Temperature Detectors-Effect Of Polyurethane Concentration, Multi-Walled Carbon Nanotubes, And Oxidant, Jordan M. Shaffer

Williams Honors College, Honors Research Projects

Current resistance temperature detectors (RTDs) are rigid and create pressure points when used in contact with the human body. The current RTDs can also not be used in confined areas like the inside of a prosthetic. The research done for this paper explores the possibility of creating a soft fabric like RTD that can accurately measure temperature. This RTD could be used in medical devices, be placed in prosthetic legs, and be worn for a long period of time creating no discomfort for the user. Polyurethane scaffolds were created through an electrospinning process and multiwalled carbon nanotubes were adhered to …

Diffusive Behavior Of Physically Cross-Linked Hydrogels, Morgan A. Stilke

Williams Honors College, Honors Research Projects

A hydrogel is a water swollen polymeric network that has the potential to transform a variety of biomedical applications because of its biocompatibility and water content. Unfortunately, hydrogels typically have poor mechanical robustness. The majority of the content is water, while the remaining structure consists of a physical network, a covalent network, or a combination of both, yielding strength and toughness. There are several strategies attempted to improve mechanical properties including double network hydrogels comprised of two interpenetrating networks: one being a highly crosslinked sacrificial network and the other being a weakly crosslinked network that maintains reversibility after deformation. However, …

Separation Of Water From Ulsd Using Superhydrophobic Ps Nanofiber Mats, Alisa G. Webel

Williams Honors College, Honors Research Projects

Superhydrophobic polystyrene nanofiber membranes have potential to separate micron scale water droplets from organic due to their hydrophobicity and small pore openings. Polystyrene nanofibers were electrospun into flat sheets and cylindrical filter membranes. The fibers were crosslinked to increase strength and reduce solubility in diesel fuel. The filters were tested and the filtration efficiency was compared to their non-crosslinked counterparts. The optimal electrospinning conditions to create superhydrophobic nanofibers were found to be 20 wt. % PS fibers at 1 mL/hr. under a current of 20kV and at a distance of 20 cm away from the ground. It was found that …

Fatigue Performance Of Glass Fiber/Epoxy Composite At Low Temperature, Prajakta Govande 2817401530, Dominic R. Cross, Kwek Tze Tan

Williams Honors College, Honors Research Projects

Due to technological advancement in the manufacturing methods of composites, these materials find a plethora of applications which include but are not limited to wind energy projects in the form of turbine blades. These blades at times are exposed to temperatures as low as -40ᵒC. Therefore, there is a need to study low-temperature effects on such materials under different loading scenarios. This study investigates the possibility of utilizing MAC/GMC as a simulation tool to match trends of mechanical properties such as fatigue performance and stiffness variation of a given Glass fiber/Epoxy composite at 23ᵒC (room temperature) and -40 ᵒC, under …

Compact Electric Personal Transport, James M. Maganja Mr.

Williams Honors College, Honors Research Projects

The goal of this project was to design a compact and powerful personal transport vehicle around the high performance electric power systems associated with large radio controlled aircraft. The relatively powerful and lightweight components associated with these models are the perfect candidate for this application. The selected electric motor for instance is rated at 3kW of continuous power with a mass of just 384 grams.

There were engineering challenges that arose from using these types of components for a vehicle application. At its designed operating voltage the motor will be spinning at around 25,000 rpm. This will require a novel …