Engineering Commons^™

Research Of New Fireproof Supplied Polymer Composites Based On Epoxy Resin For Metal Structures, Kuvondiq Murtazaev, F.N. Nurkulov, D.N. Mukhiddinov, M.T. Аbdirova

Technical science and innovation

In the article proposes new compositions based on fire retardant expanded polymer composites of epoxy resin ED-20 and phosphorus-containing oligomers, catalysts, aluminum hydroxide and nitrogen-containing compounds.

The obtained sample of fire retardant expanded polymer composites based on epoxy resin, as well as the initial substances, were investigated by IR spectroscopy (Nicolet 5700), thermogravimetric analysis (TG) (SDT Q600) of physical and chemical properties and determination of fire retardant efficiency according to GOST R 53295-2009.

Infrared spectroscopy has been used to determine the bends and epoxy groups that characterize composites, as well as to determine the frequencies of phosphorus, nitrogen, and metal-containing …

Methods Of Improving Complex Cleaning Of Sand Plugs In Khodjaobad Underground Gas Wells, Abdulaziz Murodov, Muhriddin Muydinov, Saidaziz Khabibullaev, Aziz Abidov

Technical science and innovation

The purpose of the study is to develop recommendations for improving the methods of cleaning complex sand plugs in wells of underground gas storage. To organize the correct and efficient use of underground gas storage, the bottom of wells must be kept clean. The article develops recommendations on the use of optimal methods for cleaning wells from complex sand jams on the example of Khujabad UGS. In addition, recommendations were developed for the operation of production wells in the horizons of the XX-XXI-XXII underground gas storage of Khujabad

Study Of The Thermodynamic Properties Absorbation Sulfur Storage Gas Of Zinc And Copper Industry, Berdiyarov Tilovkabulovich Berdiyarov Dr., Sh. T. Khojiev, S. T. Matkarimov, Sh. Munosibov

Technical science and innovation

The article considers the problems of utilization of industrial gases formed in the production of copper and ore containing sulfur anhydrides. Currently, the composition of process gases entering the gas purification department is approximately 6-7% SO₂, 0.2-0.3% SO₃ and other gases, until sulfuric acid is obtained from these gases, the sulfate is treated in a counter-scheme with 8% sulfate acid. The aim is to first reduce the temperature of the exhaust gases and second to avoid flying components such as as As, F, Se. As a result of the studies, the amount of SO₂ in the …

Imitation Models Of The Railway Organization For Railway Transport Flows, J Usmonov, T Djuraev

Technical science and innovation

Considered the questions of solving the problem of optimization of cargo traffic management in the railway transport throughout the logistics chain, organizing the formation and implementation of cargo loading plans that do not allow exceeding the maximum and reduce the minimum levels of availability of a particular cargo on the destination road. And also the article justifies the solution of the problem of finding the maximum flow in the railway network, it is noted that in any transport network the maximum flow is equal to the minimum capacity. If the flow is maximal, then there is a section whose transmission …

Development Of Asphalt-Resin-Paraffin Deposits Solvent, Gulmira Todjiyeva, F Badriddinova, M Tursunov, H Kadirov, E Cherkasova

Technical science and innovation

A solvent which is a mixture of aromatic hydrocarbons of the C₉ fraction and aliphatic alcohols in a 1:1 ratio, a nonionic surfactant in an amount of 1 - 3% by weight has been developed. It leads to an increase in the dissolving and washing capabilities of the solvent for more than 2 times in relation to paraffin-type AS. The ability of the chemical composition, which is a solvent composition, to have a depressant-dispersing effect in relation to paraffin-type AS has been determined.

Despite a large number of studies devoted to the development of technologies for the removal of …

The History Of The Tectonic Development Of The South-Eastern Part Of The Turan Plate And The Beshkent-Kashkadarya Foothill Depression Of The Modern Tien Shan, Azamjon Zakirov, Ravshan Zakirov, Irmuxamat Khalismatov, Zakirova Feruzaxon, Borshov Victor

Technical science and innovation

The article examines the history of the tectonic development of the southeastern part of the Turan Plate and the Beshkent-Kashkadarya foothill depression, which have been studied and discussed by many researchers. The history of the tectonic development of the research area is relatively complete since the Pre-Jurassic deposits. The pre-Jurassic deposits on the territory of the Amu Darya syneclise are confined mainly to the Khiva and Zaunguz grabens, delimited by the Central Amu Darya ridge.

At the end of the Oligocene, tectonic activity increased sharply within the Turanian Plate, which included the research area. It flowed more intensively both from …

Evaluation Of The Thickness Of Vacuum Metal And Semiconductor Coatings Using Computer Programs, Bahrom Igamov, Ilkhom Bekpulatov, Aleksey Kamardin, Tulkun Kamilov, Ilhom Turapov, D Igamova

Technical science and innovation

Comparative studies of the thickness of coatings of such metals as Cu, Ag, Cr, Co, and also Mn4 Si7 on polished substrates made of Si, Si O2 / Si structure, ST - 50 glass ceramic, mica were carried out. The coatings were deposited in vacuum using thermal evaporation and magnetron sputtering. The thickness and uniformity of deposited coatings on rotating substrates are estimated by optical measurements and computer simulation. Mathematical models for the formation of coatings on flat substrates have been developed. The possibility of the optimal position of the substrate for the formation of functional coatings uniform in thickness …

New Transformer Changer Static Characteristics Measuring Angle Silences Difference, Sultan Faizullayevich Аmirov, Nurulla Raxmatullayevich Yuldashev

Chemical Technology, Control and Management

Presented the specific features of the new transformer converter, which measures the difference in angular displacement, and examines the nonlinearity levels of static characteristics, sensitivity and static characteristics. Studies have shown that in a new measuring device, where one of the two moving parts consists of a magnetic conductor made in the form of an Archimedean spiral made of ferromagnetic material, the balance of the magnetic bridge changes not only depending on the angle of rotation of it’s shoulder resistances. the current is disturbed by the change in the magnitude of the combined air gap depending on the angle of …

Predictive Analysis And Synthesis, Modeling And Control Of Complex Technological Processes And Systems, Zhahongir Sherboyevich Bekqulov

Chemical Technology, Control and Management

Consider the theoretical underpinnings of practically predictive analysis and synthesis, modeling and automatic control of complex chemical technological processes and systems, and the evolution of advanced (or advanced) APC (Advanced Process Control) control of technological processes and industries. The current state of industrial automation systems and the characteristics of their deployment are highlighted. The features of each stage of the analysis and synthesis of APC - advanced process control for complex dynamic objects are disclosed. The real situation and features of the implementation of industrial automation systems of industrial enterprises are reflected.

Quality Control Of Combustion Of Gaseous Fuel In Furnaces, Azamat Toirovich Rajabov

Chemical Technology, Control and Management

The issues of research and development of systems for monitoring the availability and quality of the process of fuel combustion in industrial furnaces are interpreted. The perspective of using new elements in control systems - communication sensors for the presence and quality in gas-burning installations and furnaces are shown. A method has been developed to control the optimal aeration coefficient based on the extreme of the total integral amplitude-frequency characteristic of the flame conductivity pulsations, which makes it possible to control the quality characteristics of gas-burner devices and control the ratio of the components of the combustible mixture with high …

Developing Advanced Process Control System For Manufacturing Processes Using Virtual Analyzer, Elyor Erkinovich Samadov

Chemical Technology, Control and Management

This research reflects outlines the main potential features of Advanced Process Control (APC) systems for improved control of technological processes and production. It is shown developing APC systems using a virtualized analyzer (VA) is a very effective technique to increase the efficiency of industrial production. This research reflects the main steps of generating VA as part of the APC system and also describes the key features of each step-in terms of analyzer synthesis.

Uncertainty Of The Ultrasonic Method For Determining The Strength Of Concrete, Ortagoli Sharipovich Hakimov, Zamira Khudoyberdiyevna Ernazarova

Chemical Technology, Control and Management

The issues of measuring the strength of concrete by the method of surface sounding by ultrasound are considered. A measurement model and formulas for estimating the total standard measurement uncertainty, information about the standards used, measurement tools and methods, and environmental parameters are given. Information about the estimation of uncertainty in the form of "eight steps", such as: measurement task; mathematical model of measurement; analysis of input values; observation results; correlations; uncertainty budget; expanded uncertainty; measurement result. It has been established that the uncertainty of type B of the ultrasonic method for determining the strength of concrete is much less …

Design Lifecycle Management Of Technological Processes, Yusuf Shodiyevich Avazov

Chemical Technology, Control and Management

The issues of life cycle management of design processes of complex technological processes are considered. An analysis of works devoted to the automated design of technological processes and industries, product life cycle management, and the use of predominant modeling in design is presented. A structure for the implementation of the design of technological processes is proposed and it’s components are described. An algorithm is proposed to reduce the life cycle of the design of a technological process. The sequence of selection of the most optimal project options with the help of the proposed algorithm is described. It is shown that …

Virtual Analyzers For Increasing The Intelligence Of Industrial Process Control Systems, Umidjon Abdimajotovich Ruziev Phd, Marufjon Kobuljanovich Shodiev

Chemical Technology, Control and Management

It is shown that the development and implementation of virtual analyzers of the quality of the final industrial products is an effective tool for increasing the efficiency of industrial production. The methodology and stages of development of virtual analyzers for predicting the quality of products, monitoring non-measurable or difficult-to-measure parameters of continuous and periodic technological processes are considered, and issues of supporting and adapting a virtual analyzer during its operation without restructuring are also considered.

Algorithm For Calculating The Parameters Of A Multi-Position Electromagnetic Linear Mechatronic Module, Nazarov Khayriddin Nuritdinovich, Matyokubov Nurbek Rustamovich, Temurbek Omonboyevich Rakhimov

Chemical Technology, Control and Management

Currently, in the world in the field of science, engineering and technology, including in mechatronics and robotics, the creation of multi-coordinate mechatronic systems that perform power and control functions is becoming of paramount importance, this is due to a number of important positive qualities of the systems, such as simplicity and compactness of the design, the possibility of obtaining significant efforts, high accuracy and stability of the establishment of fixed positions, ease of control and high reliability. This article presents the calculation of the parameters of multi-position mechatronic modules based on linear execution elements. In the construction of this model, …

Regular Algorithms For Adaptive Identification Of Linear Non-Stationary Systems, H.Z. Igamberdiyev, H.I. Sotvoldiev, U.F Mamirov

Chemical Technology, Control and Management

The article deals with the formation of regular algorithms for adaptive parametric spline identification of linear non-stationary systems. Analyzed the issues of constructing adaptive identification of continuous linear non-stationary systems with monotonic and sign-constant parameters. In this case, in a non-stationary system, the entire observation interval is in some way divided into sub-intervals. Identification is carried out at each of the parameter constancy intervals, while the parameter matrix is re-evaluated for the next interval. The input data of the system are determined with an error depending on the error of approximating the state of the system by splines and approximating …

Mathematical Modeling Of Processes Of Diagnostics Of Technical And Technological Objects, Azizbek Nodirbekovich Yusupbekov, Khurshid Salim Ugli Turayev

Chemical Technology, Control and Management

The work is an introduction to the technical diagnostics of technical (or technological) objects. It discloses the basic concepts and definitions of the reliability of dynamic systems as objects of diagnostic reference knowledge and their diagnosis. Structural schemes of diagnosing objects with individual and combined channels of influence are analyzed. Questions of rational construction of base of reference knowledge are stated.

Control Of The Facial Design Process Of Innovative Developments, Yusuf Shodiyevich Avazov

Chemical Technology, Control and Management

The role and place of visual design in the process of creating an innovative development have been stated. It is shown that the tasks of the face stage of the product life cycle are devoted to systemic issues, in the center of which is the resolution of the contradiction between the desired and the achievable. The first is determined by the need to create a new system of a higher level, and the achievable is determined by the level of development of science, technology and production technology, as well as by the conditions of operation and repair. The work is …

Information Software And Devices For Energy Efficiency Management And Control, Narzullo Nuriddinovich Mirzoyev

Chemical Technology, Control and Management

The article provides information on modern methods of management and control of energy efficiency at industrial enterprises. This includes the software needed to manage and monitor energy efficiency, as well as the formation of a database. In addition, a structural diagram of an intelligent power monitoring system has been developed and its elements have been selected. Describes the principle of operation of an intelligent measuring device, its connection to the network, conversion of analog signals to digital, channels and ranges of signal transmission, metrological characteristics. The article details the capabilities and benefits of smart meters.

Ultrasonic Extraction Of Instant Forms Of Plant Substrates In Industrial Production, Shakhnoza Abduvaxitovna Sultanova, Jasur Safarov, Azamat Bakir O'G'Li Usenov, Doston Ishmuhammat Ogli Samandarov, Qobil Akmal Ogli Mukhiddinov

Chemical Technology, Control and Management

In recent years, both in our country and abroad, ultrasonic extraction methods have been increasingly used in industrial production, which is associated with the extraction of various substances and compounds from natural plant substrates. Domestic and foreign experience shows that this method has significant advantages over traditional methods and can significantly increase the efficiency and profitability of industrial enterprises, producing complete and functional food products.

This article discusses a brief theory of ultrasonic cavitation and the experience of extracting substrates from plants. Different results have been compared and analyzed.

Error Of Contactless Converters Of High Currents Of Monitoring And Control Systems From The Influence Of Currents Of Neighboring Buses, A.M. Plakhtiev, Gayratjon Gaziev, Y.A. Meliboev, O. Doniyorov

Chemical Technology, Control and Management

The article presents the general principles of construction of contactless ferromagnetic converters of large direct currents, the main requirements for them, and the results of the development of one of the developed wide-range magnetomodulation contactless converters of control and control systems concerning large electric power facilities. The developed converter, unlike the known ones, have a wide range of controlled currents, increased accuracy and sensitivity, a technological design, and small weight and dimensions at low material consumption and cost. The errors of contactless wide-range magnetomodulation converters from the influence of currents of neighboring buses connected by and the opposite direction are …

Control System Synthesis With Self-Adapting Regulator By Interactive Adaptation Method, Isamiddin Xakimovich Siddikov, Renata Nikolayevna Izmaylova

Chemical Technology, Control and Management

The research results on the creation of a self-adapting control system for a nonlinear dynamic object based on the theory of intelligent control using interactive adaptation methods have been presented. The lack of an accurate description and the nonlinearity of the dynamic properties of the object under study, the presence of mutual influence of cross communication channels in the control circuits, as well as the influence of various types of uncertainties associated with the lack of a priori information about the process, significantly complicate the solution of the problem of synthesis of highly efficient control systems for dynamic objects, which …

Analysis Of Water Treatment Methods For Circulating Water Supply In Industrial Plants, Djalolitdin Paxritdinovich Mukhitdinov, Nilufar Abdusomi Kizi Yunusova

Chemical Technology, Control and Management

This scientific paper deals with the problem of extracting Ca2+ and Md2+ salts from water in order to prevent the formation of scale on the heating surfaces of heat exchange equipment. The features, advantages and disadvantages of chemical, membrane and ion exchange methods of water treatment have been evaluated. It has been shown that the chemical method of water purification can be used only for the preparation of industrial water at large stations (at the same time, high residual hardness prevails in the water, the equipment has low productivity), and the membrane method requires pretreatment of water, creation of overpressure …

Algorithms For Modal Control Synthesis In Multi-Dimensional Dynamic System, Husan Zakirovich Igamberdiev, Jasur Usmonovich Sevinov, Oqila Husanovna Boyeva

Chemical Technology, Control and Management

Algorithms for the synthesis of modal control of a multidimensional dynamic system with concentrated parameters in the state space have been presented. The problems of modal control of a multidimensional dynamic system have been formulated for the case when the matrix representation of a closed system has a simple structure. The conditions for the solvability of the problem of modal control of a multidimensional dynamic system by means of output feedback have been obtained. To give numerical stability in the procedure of pseudo-circulation of matrices, it is proposed to use the concepts of regular methods in the form of scalar …

Implementation Of The Pid Control Law Of A Multidimensional Dynamic System, Khurshid Salim Ugli Turayev

Chemical Technology, Control and Management

Most industrial automation facilities are multi-circuit with a significant influence of cross-links between the goals. The paper develops a system for automatic parameter adjustment of a programmable logic controller that implements the proportional-integral-differential control law of a multidimensional dynamic object. The issues of decentralized management of multidimensional dynamic objects are discussed. The control system is based on the method of independent synthesis with static compensation of the impact of cross-links. Additional software has been developed to determine the parameters of the control system. After setting the necessary parameters, the process of automatic adjustment of the controller parameters starts. Self-tuning procedures …

Analysis Of Grain Product Drying Methods, Azizbek Nodirbekovich Yusupbekov, Dilmurod Egamberganov

Chemical Technology, Control and Management

Various drying methods and grain characteristics have been studied. The advantages and disadvantages of various grain drying methods were obtained. The use of the following methods of drying grain products is very useful for speeding up the drying process, reducing waste, achieving more flexible process management and delivering all the nutrients of dried grain and grain products to the subsequent production process. The technological approaches that increase the efficiency of high-quality production after drying grain products, the requirements for modern grain dryers have analyzed. The ways of overcoming the problem of high energy consumption in the process of drying grain …

Implementation Of Distance Learning At Universities Using The Experience Of The Honeywell Process Control Laboratory At Tashkent State Technical University, Nodirbek Rustambekovich Yusupbekov, Adilov Tulkunovich Farukh, Isakova Ismailovna Sitora

Chemical Technology, Control and Management

The experience of modernization of the Honeywell Process Control Laboratory at Tashkent State Technical University has been considered (which is equipped with upgraded equipment (simulators for simulating various technological processes, distance learning tools). As a result, the quality of the demonstration of process control mechanisms increased the availability of theoretical and practical knowledge in the field of automated control systems. They also considered the teaching methods necessary for a modern student – remote access in real time, when students pass a knowledge test, consult with teachers, etc.

Analysis Of Harmful Mixtures In Air Flow During Cotton Cleaning, A Adilova, O J. Murodov, P N. Rudovskiy

Technical science and innovation

Annotation. The article analyzes the separation of harmful impurities in the air flow from various machines during the initial processing of cotton, ways to clean the dusty air released from the dust, dusty air from the air extracted from dust extractors and pneumatic transport installations and dust and contaminants before release into the atmosphere. The causes and ways to reduce the release of large amounts of dust at all stages of the primary processing of cotton, which can reduce air pollution in production facilities and air, worsen the working conditions of workers and employees and lead them to occupational diseases, …

Economic Test Results Of Experimental Spring Device, Husniddin D. Irisov, Alexander P. Kartoshkin

Technical science and innovation

The article conducts economic research on the development of resource-saving technologies in the artificial shedding of cotton leaves and new scientific and technical solutions for the formation of high-dispersion droplets of spraying equipment, including the technological operation of high-dispersion droplet-forming spraying devices for small-volume fan sprayers.The experimental spraying unit, equipped with advanced cultivators, was tested in the field under typical field conditions and optimal agro-technical terms for the agro-technical evaluation test area. During the study, test schemes were adopted to determine the performance of sprayers in the field, soil type, relief and microrelief, soil moisture and hardness were determined in …

Synthesis And Polymerization Processes Of 1-Chlorine-3- Piperidine -2-Propylmethacrylate Monomer, N U. Pulatova, O S. Maksumova, Izabela Barszczewska Rybarek

Technical science and innovation

An amino alcohol was synthesized on the basis of piperidine and epichlorohydrin. The esterification reaction of methacrylic acids with the obtained amino alcohol was studied. In order to identify optimal synthesis conditions, the influence of temperature, reaction duration and ratio of reactive reagents was investigated. The processes of obtaining unsaturated esters by esterification reactions with 1-chlorine-3-piperidine-2-propanol and acrylic-, methacrylic acids have been studied. The effect of monomer concentration on the rate of polymerization reaction and the yield of polymer formation was studied . The radical polymerization of a new monomer with a piperidine cycle in the presence of a nitrogen-containing …