Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 8 of 8
Full-Text Articles in Engineering
Biofuel Production In Ireland—An Approach To 2020 Targets With A Focus On Algal Biomass, Fionnuala Murphy
Biofuel Production In Ireland—An Approach To 2020 Targets With A Focus On Algal Biomass, Fionnuala Murphy
Fionnuala Murphy
Under the Biofuels Obligation Scheme in Ireland, the biofuels penetration rate target for 2013 was set at 6% by volume from a previous 4% from 2010. In 2012 the fuel blend reached 3%, with approximately 70 million L of biodiesel and 56 million L of ethanol blended with diesel and gasoline, respectively. Up to and including April 2013, the current blend rate in Ireland for biodiesel was 2.3% and for bioethanol was 3.7% which equates to approximately 37.5 million L of biofuel for the first four months of 2013. The target of 10% by 2020 remains, which equates to approximately …
Corrosion Of Magnesium And Aluminum In Palm Biodiesel: A Comparative Evaluation
Corrosion Of Magnesium And Aluminum In Palm Biodiesel: A Comparative Evaluation
A.S. Md Abdul Haseeb
The present study aims to investigate the comparative corrosion of light-weight metals such as aluminum and magnesium in palm biodiesel. Immersion test at room temperature was carried out for each metal for 1440 h. Sample characterization techniques employed include weight loss measurement, SEM (scanning electron microscope), XRD (X-ray diffraction), TAN (total acid number) and FTIR (Fourier transform infrared spectroscopy). Results showed that the corrosion rate of magnesium was much higher compared to that of aluminum. The surface morphology revealed a significant difference between the biodiesel exposed aluminum and magnesium specimens. Upon exposure to biodiesel, the magnesium surface was found to …
Investigation Of Friction And Wear Characteristics Of Palm Biodiesel
Investigation Of Friction And Wear Characteristics Of Palm Biodiesel
A.S. Md Abdul Haseeb
Use of biodiesel in automobile engine is creating tribology related new challenges. The present study aims to assess the friction and wear characteristics of palm biodiesel at different concentration level by using four-ball wear machine. The investigated fuels were biodiesel (B100), diesel (B0) and three different biodiesel blends such as B10 (10% biodiesel in diesel), B20, B50. Tests were conducted at 75 °C under a normal load of 40 kg for 1 h at four different speeds viz, 600, 900, 1200 and 1500 rpm. Worn surfaces of the balls were examined by SEM. Results showed that wear and friction decreased …
Corrosion Mechanism Of Copper In Palm Biodiesel
Corrosion Mechanism Of Copper In Palm Biodiesel
A.S. Md Abdul Haseeb
Biodiesel is a promising alternative fuel. However, it causes enhanced corrosion of automotive materials, especially of copper based components. In the present study, corrosion mechanism of copper was investigated by scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Compositional change of biodiesel due to the exposure of copper was also investigated. Corrosion patina on copper is found to be composed of Cu2O, CuO, Cu(OH)2 and CuCO3. Dissolved O2, H2O, CO2 and RCOO- radical in biodiesel seem to be the leading factors in enhancing the corrosiveness of biodiesel. © 2012 Elsevier Ltd.
The Effects Of Catalysts In Biodiesel Production: A Review, Abdul Aziz Abdul Raman
The Effects Of Catalysts In Biodiesel Production: A Review, Abdul Aziz Abdul Raman
Abdul Aziz Abdul Raman
Biodiesel fuel has shown great promise as an alternative to petro-diesel fuel. Biodiesel production is widely conducted through transesterification reaction, catalyzed by homogeneous catalysts or heterogeneous catalysts. The most notable catalyst used in producing biodiesel is the homogeneous alkaline catalyst such as NaOH, KOH, CH3ONa and CH3OK. The choice of these catalysts is due to their higher kinetic reaction rates. However because of high cost of refined feedstocks and difficulties associated with use of homogeneous alkaline catalysts to transesterify low quality feedstocks for biodiesel production, development of various heterogeneous catalysts are now on the increase. Development of heterogeneous catalyst such …
Investigation Of Friction And Wear Characteristics Of Palm Biodiesel
Investigation Of Friction And Wear Characteristics Of Palm Biodiesel
A.S. Md Abdul Haseeb
Use of biodiesel in automobile engine is creating tribology related new challenges. The present study aims to assess the friction and wear characteristics of palm biodiesel at different concentration level by using four-ball wear machine. The investigated fuels were biodiesel (B100), diesel (B0) and three different biodiesel blends such as B10 (10% biodiesel in diesel), B20, B50. Tests were conducted at 75 °C under a normal load of 40 kg for 1 h at four different speeds viz, 600, 900, 1200 and 1500 rpm. Worn surfaces of the balls were examined by SEM. Results showed that wear and friction decreased …
Effect Of The Oil Acidity On The Methanolysis Performances Of Lime Catalyst Biodiesel From Waste Frying Oils (Wfo), João F. Gomes
Effect Of The Oil Acidity On The Methanolysis Performances Of Lime Catalyst Biodiesel From Waste Frying Oils (Wfo), João F. Gomes
João F Gomes
No abstract provided.
Biodiesel Production From Waste Trying Oils Over Lime Catalysts, João F. Gomes
Biodiesel Production From Waste Trying Oils Over Lime Catalysts, João F. Gomes
João F Gomes
No abstract provided.