Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Selected Works

Electrical and Computer Engineering

Wireless sensor networks

Articles 1 - 13 of 13

Full-Text Articles in Engineering

On Non-Cooperative Multiple-Target Tracking With Wireless Sensor Networks, Ye Zhu, A. Vikram, Huirong Fu, Yong Guan Jun 2017

On Non-Cooperative Multiple-Target Tracking With Wireless Sensor Networks, Ye Zhu, A. Vikram, Huirong Fu, Yong Guan

Yong Guan

In this paper, we propose an approach to track multiple non-cooperative targets with wireless sensor networks. Most existing tracking algorithms can not be directly applied to non-cooperative target tracking because they assume the access to signals from individual targets for tracking by assuming that: 1) there is only one target in a field; 2) signals from different co-operative targets can be differentiated; or 3) interference caused by signals from other targets is negligible because of attenuation. We propose a general approach for tracking non-cooperative targets. The tracking algorithm first separates the aggregate signals from multiple indistinguishable targets via the blind …


Effective Stochastic Modeling Of Energy-Constrained Wireless Sensor Networks, Ali Shareef, Yifeng Zhu Sep 2013

Effective Stochastic Modeling Of Energy-Constrained Wireless Sensor Networks, Ali Shareef, Yifeng Zhu

Yifeng Zhu

Energy consumption of energy-constrained nodes in wireless sensor networks (WSNs) is a fatal weakness of these networks. Since these nodes usually operate on batteries, the maximum utility of the network is dependent upon the optimal energy usage of these nodes. However, new emerging optimal energy consumption algorithms, protocols, and system designs require an evaluation platform. This necessitates modeling techniques that can quickly and accurately evaluate their behavior and identify strengths and weakness. We propose Petri nets as this ideal platform. We demonstrate Petri net models of wireless sensor nodes that incorporate the complex interactions between the processing and communication components …


Channel Allocation In Wireless Networks With Directional Antennas, Hong-Ning Dai, Kam-Wing Ng, Min-You Wu Dec 2012

Channel Allocation In Wireless Networks With Directional Antennas, Hong-Ning Dai, Kam-Wing Ng, Min-You Wu

Hong-Ning Dai

In this paper, we study the channel allocation in multi-channel wireless ad hoc networks with directional antennas. In particular, we investigate the problem: given a set of wireless nodes equipped with directional antennas, how many channels are needed to ensure collision-free communications? We derive the upper bounds on the number of channels, which heavily depend on the node density and the interference ratio (i.e., the ratio of the interference range to the transmission range). We construct several scenarios to examine the tightness of the derived bounds. We also take the side-lobes and back-lobes as well as the signal path loss …


Wispernet: Anti-Jamming For Wireless Sensor Networks, Miroslav Pajic, Rahul Mangharam Oct 2012

Wispernet: Anti-Jamming For Wireless Sensor Networks, Miroslav Pajic, Rahul Mangharam

Rahul Mangharam

Resilience to electromagnetic jamming and its avoidance are difficult problems. It is often both hard to distinguish malicious jamming from congestion in the broadcast regime and a challenge to conceal the activity patterns of the legitimate communication protocol from the jammer. In the context of energy-constrained wireless sensor networks, nodes are scheduled to maximize the common sleep duration and coordinate communication to extend their battery life. This results in well-defined communication patterns with possibly predictable intervals of activity that are easily detected and jammed by a statistical jammer. We present an anti-jamming protocol for sensor networks which eliminates spatio-temporal patterns …


Demo Abstract: Embedded Virtual Machines For Wiress Industrial Automation, Rahul Mangharam, Miroslav Pajic, Shivakumar Sastry Oct 2012

Demo Abstract: Embedded Virtual Machines For Wiress Industrial Automation, Rahul Mangharam, Miroslav Pajic, Shivakumar Sastry

Rahul Mangharam

The factory of the future is the Wireless Factory - fully programmable, nimble and adaptive to planned mode changes and unplanned faults. Today automotive assembly lines loose over $22,000 per minute of downtime. The systems are rigid, difficult to maintain, operate and diagnose. Our goal is to demonstrate the initial architecture and protocols for all-wireless factory control automation. Embedded wireless networks have largely focused on open-loop sensing and monitoring. To address actuation in closed-loop wireless control systems there is a strong need to re-think the communication architectures and protocols for reliability, coordination and control. As the links, nodes and topology …


Anti-Jamming For Embedded Wireless Networks, Miroslav Pajic, Rahul Mangharam Oct 2012

Anti-Jamming For Embedded Wireless Networks, Miroslav Pajic, Rahul Mangharam

Rahul Mangharam

Resilience to electromagnetic jamming and its avoidance are difficult problems. It is often both hard to distinguish malicious jamming from congestion in the broadcast regime and a challenge to conceal the activity patterns of the legitimate communication protocol from the jammer. In the context of energy-constrained wireless sensor networks, nodes are scheduled to maximize the common sleep duration and coordinate communication to extend their battery life. This results in well-defined communication patterns with possibly predictable intervals of activity that are easily detected and jammed by a statistical jammer. We present an anti-jamming protocol for sensor networks which eliminates spatio-temporal patterns …


Embedded Virtual Machines For Robust Wireless Control Systems, Rahul Mangharam, Miroslav Pajic Oct 2012

Embedded Virtual Machines For Robust Wireless Control Systems, Rahul Mangharam, Miroslav Pajic

Rahul Mangharam

Embedded wireless networks have largely focused on open loop sensing and monitoring. To address actuation in closed loop wireless control systems there is a strong need to re-think the communication architectures and protocols for reliability, coordination and control. As the links, nodes and topology of wireless systems are inherently unreliable, such time-critical and safety-critical applications require programming abstractions where the tasks are assigned to the sensors, actuators and controllers as a single component rather than statically mapping a set of tasks to a specific physical node at design time. To this end, we introduce the Embedded Virtual Machine (EVM), a …


The Wireless Control Network: A New Approach For Control Over Networks, Miroslav Pajic, Shreyas Sundaram, George Pappas, Rahul Mangharam Oct 2012

The Wireless Control Network: A New Approach For Control Over Networks, Miroslav Pajic, Shreyas Sundaram, George Pappas, Rahul Mangharam

Rahul Mangharam

We present a method to stabilize a plant with a network of resource constrained wireless nodes. As opposed to traditional networked control schemes where the nodes simply route information to and from a dedicated controller (perhaps performing some encoding along the way), our approach treats the network itself as the controller. Specifically, we formulate a strategy for each node in the network to follow, where at each time-step, each node updates its internal state to be a linear combination of the states of the nodes in its neighborhood. We show that this causes the entire network to behave as a …


Closing The Loop: A Simple Distributed Method For Control Over Wireless Networks, Miroslav Pajic, Shreyas Sundaram, Jerome Le Ny, George J. Pappas, Rahul Mangharam Oct 2012

Closing The Loop: A Simple Distributed Method For Control Over Wireless Networks, Miroslav Pajic, Shreyas Sundaram, Jerome Le Ny, George J. Pappas, Rahul Mangharam

Rahul Mangharam

We present a distributed scheme used for control over a network of wireless nodes. As opposed to traditional networked control schemes where the nodes simply route information to and from a dedicated controller (perhaps performing some encoding along the way), our approach, Wireless Control Network (WCN), treats the network itself as the controller. In other words, the computation of the control law is done in a fully distributed way inside the network. We extend the basic WCN strategy, where at each time-step, each node updates its internal state to be a linear combination of the states of the nodes in …


The Wireless Control Network: A New Approach For Control Over Networks, Miroslav Pajic, Shreyas Sundaram, George Pappas, Rahul Mangharam Mar 2012

The Wireless Control Network: A New Approach For Control Over Networks, Miroslav Pajic, Shreyas Sundaram, George Pappas, Rahul Mangharam

George J. Pappas

We present a method to stabilize a plant with a network of resource constrained wireless nodes. As opposed to traditional networked control schemes where the nodes simply route information to and from a dedicated controller (perhaps performing some encoding along the way), our approach treats the network itself as the controller. Specifically, we formulate a strategy for each node in the network to follow, where at each time-step, each node updates its internal state to be a linear combination of the states of the nodes in its neighborhood. We show that this causes the entire network to behave as a …


The Wireless Control Network: A New Approach For Control Over Networks, Miroslav Pajic, Shreyas Sundaram, George Pappas, Rahul Mangharam Mar 2012

The Wireless Control Network: A New Approach For Control Over Networks, Miroslav Pajic, Shreyas Sundaram, George Pappas, Rahul Mangharam

George J. Pappas

We present a method to stabilize a plant with a network of resource constrained wireless nodes. As opposed to traditional networked control schemes where the nodes simply route information to and from a dedicated controller (perhaps performing some encoding along the way), our approach treats the network itself as the controller. Specifically, we formulate a strategy for each node in the network to follow, where at each time-step, each node updates its internal state to be a linear combination of the states of the nodes in its neighborhood. We show that this causes the entire network to behave as a …


The Wireless Control Network: A New Approach For Control Over Networks, Miroslav Pajic, Shreyas Sundaram, George Pappas, Rahul Mangharam Mar 2012

The Wireless Control Network: A New Approach For Control Over Networks, Miroslav Pajic, Shreyas Sundaram, George Pappas, Rahul Mangharam

George J. Pappas

We present a method to stabilize a plant with a network of resource constrained wireless nodes. As opposed to traditional networked control schemes where the nodes simply route information to and from a dedicated controller (perhaps performing some encoding along the way), our approach treats the network itself as the controller. Specifically, we formulate a strategy for each node in the network to follow, where at each time-step, each node updates its internal state to be a linear combination of the states of the nodes in its neighborhood. We show that this causes the entire network to behave as a …


Upper Bounds On The Number Of Channels To Ensure Collision-Free Communications In Multi-Channel Wireless Networks Using Directional Antennas, Hong-Ning Dai, Kam-Wing Ng, Min-You Wu Dec 2009

Upper Bounds On The Number Of Channels To Ensure Collision-Free Communications In Multi-Channel Wireless Networks Using Directional Antennas, Hong-Ning Dai, Kam-Wing Ng, Min-You Wu

Hong-Ning Dai

Recent studies have found that using multiple channels can separate concurrent transmissions and significantly improve network throughput. However, these studies have only considered wireless nodes that are equipped with omni-directional antennas, which have high interference. On the other hand, other researchers have found that using directional antennas in wireless networks can reduce interference and improve the network performance. But their studies have only considered single channel to be used in wireless networks with directional antennas. Thus, integrating the two technologies of multiple channels and directional antennas together can potentially bring more benefits. Some previous works have studies the capacity on …