Engineering Commons^™

Fatigue Strength Of Steel Bridge Members With Intersecting Welds, David T. Delong, Mark D. Bowman

JTRP Technical Reports

The brittle fracture of the Hoan Bridge in December 2000 highlighted the fracture susceptibility of details containing intersecting welds in steel bridges. Though it is now known that details with intersecting welds should be avoided, many existing bridges in Indiana contain details with intersecting welds. Little experimental data on the fatigue performance of these details exists.

The purpose of this study was to evaluate the fatigue strength of several details commonly found in steel bridges in Indiana that contain intersecting welds. Large-scale experimental fatigue testing were performed using nine steel beams to study the behavior of three basic types of …

Long-Term Effects Of Super Heavy-Weight Vehicles On Bridges, Scott M. Wood, Necip Onder Akinci, Judy Liu, Mark D. Bowman

JTRP Technical Reports

A permit truck which exceeds the predefined limit of 108 kips is defined as a superload in Indiana. This study was conducted to examine the long-term effects of superload trucks on the performance of typical slab-on-girder bridges and to assess the likelihood of causing immediate damage. Typical steel and prestressed concrete slab-on-girder type bridges were analyzed using both beam line analysis and detailed finite element models. Furthermore, one prestressed concrete bridge and one steel bridge were instrumented using more than 50 sensors each. Strains and deflections were measured during a live load test, and each bridge was monitored for more …

Synthesis Study: Heat Treatment And Its Effects On Rehabilitating Steel Bridges In Indiana, Matthew Lackowski, Amit Varma

JTRP Technical Reports

The literature review of prior heat straightening research indicated that significant research has been conducted on the development of: (i) heat straightening repair techniques and their field implementation, (ii) guidelines and recommendations for heat straightening repair, (iii) empirical procedures for estimating plastic rotations achieved during heat straightening, (iv) empirical procedures for predicting residual stresses caused by heat straightening, and (v) the effects of heat straightening on the structural properties of repaired bridges. Currently, there is a need for additional research on: (a) the fatigue performance of heat straightened beams, (ii) the effects of single and multiple heat straightening on the …

Fatigue Of Older Bridges In Northern Indiana Due To Overweight And Oversized Loads, Volume 1: Bridge And Weigh-In-Motion Measurements, James A. Reisert, Mark D. Bowman

JTRP Technical Reports

This report is the first of a two-volume final report presenting the findings of the research work that was undertaken to evaluate the fatigue behavior of steel highway bridges on the extra heavy weight truck corridor in Northwest Indiana. The purpose of the study was to evaluate the type and magnitude of the loads that travel along the corridor and then assess the effect of those loads on the fatigue strength of the steel bridge structures on the corridor. This volume presents the results of the experimental field study conducted to evaluate the load and load effects on one steel …

The Examination Of Infra-Red Techniques For Inspection Of Steel Structures I & Ii, Vachirapun Trakulyingyong, Mark D. Bowman

JTRP Technical Reports

Infra-red thermography systems that have been developed over the last few years offer great potential to locate and discover flaws in steel highway bridge structures at a relatively early stage in their development. Under ideal conditions, the use of infra-red instrumentation should allow bridge inspection personnel to rapidly scan the structure and determine if a potential structural problem has developed. If a problem spot is located by the infra-red camera, then the trouble spot can be examined carefully to determine the need for corrective maintenance. The primary purpose of this research study is to evaluate the accuracy and reliability of …

Fatigue Behavior Of Beam Diaphragm Connections With Intermittent Fillet Welds: Part Ii, Brittle Fracture Examination Of The I-64 Blue River Bridge, Mark D. Bowman

JTRP Technical Reports

This report is the second of a two-part, three volume final report presenting the findings of the research work that was undertaken to evaluate the behavior of Indiana highway bridges with diaphragm members welded directly to the web of the primary beams and girders. Fatigue cracks have been observed at several bridges that utilize the welded diaphragm connection. The seriousness of the cracking and the corresponding potential risk on the integrity of the bridge superstructure were assessed. Inspection and repair guidelines for bridges with the welded diaphragm connections were also developed as part of the research effort. This volume presents …

Stay-In Place Deck Panels - Part 1, Ariel Goldman, Menashi D. Cohen, J. A. Ramirez

JTRP Technical Reports

The objective of this study was the evaluation of frost resistance of concrete bridge decks with stay-in-place galvanized steel deck forms. The evaluation included specific aspects related to the potential for D-cracking in concrete bridge decks with these forms. The experimental program has been set up so that the real parameters of the bridge deck overlays and the environmental conditions could have been modeled. The program included freezing-and-thawing testing of large concrete slab specimens (22 ¼” x 17 ¼” x 5 ¼”) situated in a computer-controlled environmental chamber and of small specimens (3” x 4” x 12”) immersed in water …

Fatigue Strength Of Girders With Tapered Covered Plates, Ahmed Farouk Hassan, Mark D. Bowman

JTRP Technical Reports

This report represents results from a study to determine the fatigue strength of steel beams with welded partial-length cover plates. Results of an experimental investigation that examined the fatigue strength of various cracked cover plate end details that were subsequently repaired are presented. The repair methods investigated included a slip-critical bolted splice plate connection, air-hammer peening, and a combination of the previous two called a partial bolted splice connection. Also, an analytical model was developed to predict the fatigue behavior of a cover plate and detail that is repaired using one of the three repair methods investigated and which contains …