Engineering Commons^™

Study Of Non-Equilibrium Electron Dynamics In Metals, Wael Mohamed Gomaa Ibrahim

Electrical & Computer Engineering Theses & Dissertations

Thermal phenomena, such as heat propagation, lattice melting, and ablation, are the result of energy deposition in metals. A fundamental understanding of the electron dynamics leading to these thermal phenomena would benefit many laser applications, such as laser deposition of thin films and laser processing.

In this work, thin metal films were prepared using the resistive heating evaporation technique. High dynamic range autocorrelators were constructed to characterize the different laser systems used in this study. The nonequilibrium electron dynamics in single layer gold films, multi-layer gold-vanadium, and gold-titanium films were studied. The time evolution of the electron temperature was monitored …

Investigation Of Port Fuel Injector Spray Mass Distribution By Laser Induced Fluorescence, Tuba Bayraktar

Mechanical & Aerospace Engineering Theses & Dissertations

Modern internal combustion engines have stringent requirements for performance and reduced toxic emissions. The fuel delivery system, and particularly the fuel injectors, have a vital role in reducing unburned hydrocarbons (HC) and carbon monoxide (CO) in exhaust emission.

The main goal of this study is to map the spatial and temporal distribution of the spray from a low-pressure gasoline fuel injector. To attain this goal, three tasks were performed: (1) the experimental investigation of the spray oscillation as functions of operating pressure and injector timing, (2) the determination of the appropriate dye/fuel combinations for one particular experimental technique, and (3) …

Development Of An Efficient Ti:Sapphire Laser Transmitter For Atmospheric Ozone Lidar Measurements, Khaled A. Elsayed

Electrical & Computer Engineering Theses & Dissertations

The impetus of this work was to develop an all solid-state Ti:sapphire laser transmitter to replace the current dye lasers that could provide a potentially compact, robust, and highly reliable laser transmitter for differential absorption lidar measurements of atmospheric ozone. Two compact, high-energy pulsed, and injection-seeded Ti:sapphire lasers operating at a pulse repetition frequency of 30 Hz and wavelengths of 867 nm and 900 nm, with M² of 1.3, have been experimentally demonstrated and compared to model results. The Ti:sapphire lasers have shown the required output beam quality at maximum output pulse energy, 115 mJ at 867 nm and …

Aligning Hierarchical Goals In An Organization: The Path From Training To Performance, Jeanette Denise Selby-Lucas

Engineering Management & Systems Engineering Theses & Dissertations

Training is a multi-billion-dollar industry, and with the advent of the training technology revolution and the possibilities it provides to business and government, as well as to the academic community, it is important to determine if the money invested in training by these communities is providing the expected performance on the part of those who are trained. This can be done by quantitatively evaluating the relationship between training and performance.

This study extends the scholarly literature by developing the concept of organizational alignment through a combination of Human Performance Technology literature and traditional engineering methodologies. Organizational training and performance is …

Excimer Emission From Pulsed Microhollow Cathode Discharges, Mohamed Moselhy

Electrical & Computer Engineering Theses & Dissertations

Microhollow cathode discharges (MHCDs) are direct current, high-pressure, non-equilibrium gas discharges. Direct current MHCDs in xenon and argon have shown to emit excimer radiation at 172 and 127 nm, respectively. Internal efficiency of excimer emission in DC MHCD was measured to be 6–9% in xenon, and 1–6%, depending on the gas flow rate in argon. This high efficiency is due to the high rate of rare gas excitation by electrons accelerated in the cathode fall and to subsequent three-body collisions in the high-pressure gas. The excimer power scales linearly with current; however, due to the increasing size of the source …

A Conceptual Design Tool For Engineers: An Amalgamation Of Theory Of Constraints, Theory Of Inventive Problem Solving And Logic, Stephen R. Luke

Mechanical & Aerospace Engineering Theses & Dissertations

This research creates a design methodology by synthesizing three different design tools, the Theory of Inventive Problem Solving (TRIZ), the Theory of Constraints (TOC) and Logic. The basic approach of this design method is to: (1) Reduce a design problem to a logic diagram, (2) Code the inputs and outputs to determine desirability and degree of control, (3) Identify the best inputs to manipulate in order to obtain the desired outputs and (4) Exploit innovative algorithms developed in TRIZ to find the best ways to manipulate the chosen inputs.

This research integrates and expands the methods of TRIZ and TOC. …

Generic Cost Estimation Framework For Design And Manufacturing Evaluation, Uday A. Kilkami

Mechanical & Aerospace Engineering Theses & Dissertations

A major drawback of current cost estimation models is their incapability of embracing effectively complete product development stage. Parametric estimation works well in early stages of design, but in detail design stage, a more complete estimation is provided by process model based and detail estimation techniques. A major paradigm shift is proposed in this work whereby ‘Cost’ is to be considered as a design parameter from scientific perspective, and it is to be treated as a design consequence rather than as an operational outcome. A comprehensive framework using System Analysis fundamentals is designed to study ‘Process Cost’ aspects of part …

A Formal Object Model For Layered Networks To Support Verification And Simulation, Rasha M. B. E. Morsi

Electrical & Computer Engineering Theses & Dissertations

This work presents an abstract formal model of the interconnection structure of the Open Systems Interconnection Reference Model (OSI-RM) developed using Object-Oriented modeling principles permitting it to serve as a re-usable platform in supporting the development of simulations and formal methods applied to layered network protocols. A simulation of the object model using MODSIM III was developed and Prototype Verification System (PVS) was used to show the applicability of the object model to formal methods by formally specifying and verifying a Global Systems for Mobile communications (GSM) protocol. This application has proved to be successful in two aspects. The first …

External Aerodynamics Of Heavy Ground Vehicles: Computations And Wind Tunnel Testing, Ilhan Bayraktar

Mechanical & Aerospace Engineering Theses & Dissertations

Aerodynamic characteristics of a ground vehicle affect vehicle operation in many ways. Aerodynamic drag, lift and side forces have influence on fuel efficiency, vehicle top speed and acceleration performance. In addition, engine cooling, air conditioning, wind noise, visibility, stability and crosswind sensitivity are some other tasks for vehicle aerodynamics. All of these areas benefit from drag reduction and changing the lift force in favor of the operating conditions. This can be achieved by optimization of external body geometry and flow modification devices. Considering the latter, a thorough understanding of the airflow is a prerequisite.

The present study aims to simulate …

The Effect Of Model Formulation On The Comparative Performance Of Artificial Neural Networks And Regression, Michael F. Cochrane

Engineering Management & Systems Engineering Theses & Dissertations

Multiple linear regression techniques have been traditionally used to construct predictive statistical models, relating one or more independent variables (inputs) to a dependent variable (output). Artificial neural networks can also be constructed and trained to learn these complex relationships, and have been shown to perform at least as well as linear regression on the same data sets. Research on the use of neural network models as alternatives to multivariate linear regression has focused predominantly on the effects of sample size, noise, and input vector size on the comparative performance of these two modeling techniques. However, research has also shown that …

Major Factors That Influence The Employment Decisions Of Generation X Consulting Engineers, Robert William Mayfield

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to study Generation X consulting engineers (those born between the years 1964 and 1980) in Lynchburg, Virginia, to determine the major factors that influence their employment decisions. Engineering consulting firms throughout the United States, particularly those in Lynchburg, have struggled to recruit young engineers in recent years. The recruiting of young engineers has been regarded by managers and executives as the single greatest challenge to the consulting profession. Despite the consensus within the profession that the problem existed, recommended solutions have been mostly speculative in nature and unsubstantiated by supportive data. This study focused …

Robust Face Representation And Recognition Under Low Resolution And Difficult Lighting Conditions, Mohammad Moinul Islam

Electrical & Computer Engineering Theses & Dissertations

This dissertation focuses on different aspects of face image analysis for accurate face recognition under low resolution and poor lighting conditions. A novel resolution enhancement technique is proposed for enhancing a low resolution face image into a high resolution image for better visualization and improved feature extraction, especially in a video surveillance environment. This method performs kernel regression and component feature learning in local neighborhood of the face images. It uses directional Fourier phase feature component to adaptively lean the regression kernel based on local covariance to estimate the high resolution image. For each patch in the neighborhood, four directional …

Modeling Aspects Of Magnetic Actuators And Magnetic Suspension Systems, V. Dale Bloodgood Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

This dissertation is a study of new modeling techniques developed for magnetic suspension systems. The techniques discussed are modifications of magnetic circuit theory and fundamental eddy current models. The techniques are compared against experimental test results and finite element data. The information gained from the experimental testing is used to provide insight into magnetic bearing design.

A small-gap modeling technique called extended circuit theory is developed that incorporates information about the system gained from finite element data, or experimental data, to be included in the analytic model. The variations between the classical magnetic circuit model and the finite element model …

The Development Of An Enterprise Supply Chain Model For Naval Warship Construction, Rex A. Wallen

Computational Modeling & Simulation Engineering Theses & Dissertations

The utilization of computer simulation in the shipbuilding industry is not a new concept and many shipyards in the US and around the world are using simulation tools in a variety of ways with various levels of success. In other industries, computer simulation has proven itself as a powerful tool for reducing non-value added activities and promises to become more prominent in its use as a resource management tool. Its use in the manufacturing of outfitting components in the construction of Naval warships has had limited success due mainly to the inherent nature of ship construction, especially shipyards engaged in …

Active And Adaptive Flow Control Of Twin-Tail Buffet And Applications, Zhi Yang

Mechanical & Aerospace Engineering Theses & Dissertations

Modern fighter aircraft with dual vertical tails are operated at high angles of attack. The vortex generated by leading edge extension (LEX) breaks down before reaching the two vertical tails. The wake of highly unsteady, turbulent flow causes unbalanced broadband aerodynamic loading on the tails and may produce severe buffet on the tails and lead to tail fatigue failure.

Flow suction along the vortex cores (FSVC) is investigated as an active control method for tail-buffet alleviation. Suction tubes have been tilted at different angles to study the control effectiveness of suction tubes orientation. Flow field response, aerodynamic loading and aeroelastic …

Supersonic Combustion And Mixing Characteristics Of Hydrocarbon Fuels In Screamjet Engines, Ahmed A. Taha

Mechanical & Aerospace Engineering Theses & Dissertations

The combustion characteristics of gaseous propane in supersonic airflow using the rearward-facing step that is swept inward from both end sides is studied. The effect of sweeping the step on the flow field features of propane combustion is investigated.

The study of the supersonic combustion of ethylene is carried out using different combustor configurations, different main fuel equivalence ratios, and different pilot fuel equivalence ratios.

The swept step shows the ability to hold the propane flame in the supersonic air stream without extinction. It was found that the side sweeping of the combustor exhibits the high temperature and combustion products …

Mass Transfer Reactions And Decay Sinks For Disinfectants In Water Distribution Systems, Jeremy B. Jones

Civil & Environmental Engineering Theses & Dissertations

Treatment plants utilize chlorine and chloramine both as a primary disinfectant for water purification and a secondary disinfectant for distribution system protection. The treatment goal is that the disinfectant residual be present throughout the distribution system until it reaches the customer's tap. Maintaining a residual throughout the system is critical for providing pathogen-free water and protecting human health. Therefore, water utility authorities are very interested in how disinfectants such as chlorine and chloramine decay as they travel through a water distribution system.

Current mathematical models typically divide the decay into two distinct phases. There is (1) decay occurring in the …

Finite Element Modal Formulation For Panel Flutter At Hypersonic Speeds And Elevated Temperatures, Guangfeng Cheng

Mechanical & Aerospace Engineering Theses & Dissertations

A finite element time domain modal formulation for analyzing flutter behavior of aircraft surface panels in hypersonic airflow has been developed and presented for the first time. Von Karman large deflection plate theory is used for description of the structural nonlinearity and third order piston theory is employed to account for the aerodynamic nonlinearity. The thermal loadings of uniformly distributed temperature and temperature gradients across the panel thickness are incorporated into the finite element formulation. By applying the modal reduction technique, the number of governing equations of motion is reduced dramatically so that the computational time of direct numerical integration …

Video Indexing And Retrieval Techniques Using Novel Approaches To Video Segmentation, Characterization, And Similarity Matching, Waleed Ezzat Farag

Computer Science Theses & Dissertations

Multimedia applications are rapidly spread at an ever-increasing rate introducing a number of challenging problems at the hands of the research community, The most significant and influential problem, among them, is the effective access to stored data. In spite of the popularity of keyword-based search technique in alphanumeric databases, it is inadequate for use with multimedia data due to their unstructured nature. On the other hand, a number of content-based access techniques have been developed in the context of image indexing and retrieval; meanwhile video retrieval systems start to gain wide attention, This work proposes a number of techniques constituting …