Engineering Commons^™

Effects Of Non-Equilibrium Plasma On Eukaryotic Cells (Final Report: Grant Fa9550-06-1-0004), Mounir Laroussi, Fred C. Dobbs, Old Dominion University

Electrical & Computer Engineering Faculty Publications

This document is our final report describing the research activities carried out under AFOSR Grant FA9550-06-1-0004. First, descriptions of our cold plasma generation systems are presented. Two systems, developed with past and present AFOSR support, are available in our laboratory. The first is a pulsed device capable of emitting a cold plasma plume in room air. The second is an air plasma generator the core of which is a dielectric barrier discharge excited by a high AC voltage. Following these brief descriptions we first present the effects of an atmospheric pressure air plasma on four different types of eukaryotic microalgae. …

Adding Escience Assets To The Data Web, Herbert H. Van De Sompel, Carl Lagoze, Michael L. Nelson, Simeon Warner, Robert Sanderson, Pete Johnston

Computer Science Faculty Publications

Aggregations of Web resources are increasingly important in scholarship as it adopts new methods that are data-centric, collaborative, and networked-based. The same notion of aggregations of resources is common to the mashed-up, socially networked information environment of Web 2.0. We present a mechanism to identify and describe aggregations of Web resources that has resulted from the Open Archives Initiative - Object Reuse and Exchange (OAI-ORE) project. The OAI-ORE specifications are based on the principles of the Architecture of the World Wide Web, the Semantic Web, and the Linked Data effort. Therefore, their incorporation into the cyberinfrastructure that supports eScholarship will …

Conceptual Requirements For Command And Control Languages, Andreas Tolk, Curtis L. Blais, Saikou Y. Diallo, Charles Turnitsa

Computational Modeling & Simulation Engineering Faculty Publications

The current Coalition Battle Management Language initiative (C-BML) will define a language to unambiguously exchange command and control information between systems. This paper introduces a categorization that may be used to guide the process of developing C-BML effectively by enumerating the conceptual requirements the authors have identified in model-based data engineering and process engineering based studies in various domains.

First, it is important to distinguish if application of the language will support the planning, execution, or observation phase of command and control. While C-BML already distinguishes between tasking and reporting, planning is a category with different requirements.

Second, the language …

Harmonizing Bml Approaches: Grammars And Data Models For A Bml Standard, Dietmar Kunde, Thomas Orichel, Andreas Tolk, Ulrich Schade, Michael R. Hieb

Computational Modeling & Simulation Engineering Faculty Publications

Battle Management Language (BML) is being developed as an open standard that unambiguously formalizes and specifies Command and Control information, including orders and reports built upon precise representations of tasks. BML is a language specification, based on doctrine and consistent with Coalition standards. The goal of BML is to enable and improve the interoperability in the C2 area, especially by enabling also the military communication with simulation systems and future robotic forces.

Although the need for BML is well documented, a SISO standard has still not been achieved. At present, there are two recommended approaches focusing on different aspects. In …

Utilizing Strategic Project Management Processes And The Nato Code Of Best Practice To Improve Management Of Experimentation Events, Andreas Tolk, Rafael E. Landaeta, Robert H. Kewley, Thomas T. Litwin

Computational Modeling & Simulation Engineering Faculty Publications

Systems engineering and project management are two core engineering management processes supported by core quantitative disciplines within engineering management problems. Traditional approaches to systems engineering focus on a single system being engineered and managed (i.e., project managed), while challenges addressing composition of systems of systems and the reuse of systems for new solutions require a strategic management approach that promote a process flow in which the outputs of one project (e.g., deliverables, knowledge, work documents) are captured for the benefit of other projects within and outside the project-based organization. Two other core processes of engineering management are therefore critical to …

Synthesis And Characterization Of Birnessite And Cryptomelane Nanostructures In Presence Of Hoffmeister Anions, Marcos A. Cheney, Robin Jose, Arghya Banerjee, Pradip K. Bhowmik, Shizhi Qian, Joseph M. Okoh

Mechanical & Aerospace Engineering Faculty Publications

The effect of Hoffmeister anions Cl(-), SO(4) (2-), and ClO(4) (-) on the structure and morphology of birnessite and cryptomelane-type manganese dioxide nanostructures, produced by the reduction reaction of KMnO(4) and MnSO(4) in aqueous acidic media, was studied. The syntheses were based on the decomposition of aqueous KMnO(4) in presence of HCl for birnessite-type and acidified MnSO4 for cryptomelane-type manganese dioxide under soft hydrothermal conditions. They were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM) techniques. XRD patterns show the formation of birnessite for the first synthesis and a mixture of cryptomelane and …

Understanding Practical Limits To Heavy Truck Drag Reduction, Drew Landman, Richard Wood, Whitney Seay, John Bledsoe

Mechanical & Aerospace Engineering Faculty Publications

A heavy truck wind tunnel test program is currently underway at the Langley Full Scale Tunnel (LFST). Seven passive drag reducing device configurations have been evaluated on a heavy truck model with the objective of understanding the practical limits to drag reduction achievable on a modern tractor trailer through add-on devices. The configurations tested include side skirts of varying length, a full gap seal, and tapered rear panels. All configurations were evaluated over a nominal 15 degree yaw sweep to establish wind averaged drag coefficients over a broad speed range using SAE J1252. The tests were conducted by first quantifying …

Multicast Encryption Infrastructure For Security In Sensor Networks, Richard R. Brooks, Brijesh Pillai, Matthew Pirretti, Michele C. Weigle

Computer Science Faculty Publications

Designing secure sensor networks is difficult. We propose an approach that uses multicast communications and requires fewer encryptions than pairwise communications. The network is partitioned into multicast regions; each region is managed by a sensor node chosen to act as a keyserver. The keyservers solicit nodes in their neighborhood to join the local multicast tree. The keyserver generates a binary tree of keys to maintain communication within the multicast region using a shared key. Our approach supports a distributed key agreement protocol that identifies the compromised keys and supports membership changes with minimum system overhead. We evaluate the overhead of …

International Service Learning Projects For Senior Capstone Projects, Steve Reichle, Avery Bang, Carol Considine

Engineering Technology Faculty Publications

Service learning is being adopted in many engineering programs at various course levels. International service learning experiences can provide senior level engineering students with opportunities to practice the required skills of engineering graduates as detailed by the ABET Criteria for Accrediting Engineering Programs. Bridges to Prosperity is a non-profit organization that builds footbridges in rural third world communities. These design build footbridge projects require a full year for fundraising, site visit, design and construction, and provide engineering students an opportunity to practice their knowledge of globalization, sustainability, engineering design, teamwork, and leadership. A team of students from the University of …

System Design And Integration For Repeated Impact Tests, Cheng Lin, Gene Hou, Sebastian Bawab, Timothy Coats, Hesham Nassar

Engineering Technology Faculty Publications

The design and integration of an impact-testing machine is particularly for the test of an object which is repeatedly dropped down from a specified height. Four linear actuators with two on each of the two magnetic rails are used to lift up an object weighing up to 70 lbs. Each actuator is powered and controlled by an industrial amplifier. A Programmable Logical Controller (PLC) is applied to activate these four actuators simultaneously and repeatedly. Accelerometers using an National Instruments (NI) data acquisition system are used to measure the impact force during the tests. Students gain design and implementation experiences from …

A New Pulsed Electric Field Therapy For Melanoma Disrupts The Tumor's Blood Supply And Causes Complete Remission Without Recurrence, Richard Nuccitelli, Xinhua Chen, Andrei G. Pakhomov, Wallace H. Baldwin, Saleh Sheikh, Jennifer L. Pomicter, Wei Ren, Chris Osgood, R. James Swanson, Juergen F. Kolb, Stephen J. Beebe, Karl H. Schoenbach

Bioelectrics Publications

We have discovered a new, ultrafast therapy for treating skin cancer that is extremely effective with a total electric field exposure time of only 180 mu sec. The application of 300 high-voltage (40 kV/cm), ultrashort (300 nsec) electrical pulses to murine melanomas in vivo triggers both necrosis and apoptosis, resulting in complete tumor remission within an average of 47 days in the 17 animals treated. None of these melanomas recurred during a 4-month period after the initial melanoma had disappeared. These pulses generate small, long-lasting, rectifying nanopores in the plasma membrane of exposed cells, resulting in increased membrane permeability to …

Regulation Of Intracellular Calcium Concentration By Nanosecond Pulsed Electric Fields, Shaka S. Scarlett, Jody A. White, Peter F. Blackmore, Karl H. Schoenbach, Juergen Kolb

Bioelectrics Publications

Changes in [Ca²⁺]_i response of individual Jurkat cells to nanosecond pulsed electric fields (nsPEFs) of 60 ns and field strengths of 25, 50, and 100 kV/cm were investigated. The magnitude of the nsPEF-induced rise in [Ca²⁺]_i was dependent on the electric field strength. With 25 and 50 kV/cm, the [Ca²⁺]_i response was due to the release of Ca²⁺ from intracellular stores and occurred in less than 18 ms. With 100 kV/cm, the increase in [Ca²⁺]_i was due to both internal release and to influx across the plasma …

Exploring Primitives Of Meaning In Support Of Interoperability, Charles D. Turnitsa, Andreas Tolk, Robert Kewley

Computational Modeling & Simulation Engineering Faculty Publications

Semantic mismatch between systems is due, in part, to the grouping together of terms who have defined meaning in different levels of granularity, and which are composed together into different groupings by distinct systems. It has been proposed that making use of elemental concepts (referred to here as primitives of meaning) can assist in interoperability, but seeking to define all terms at a level of granularity equal to or greater than that of all involved systems.

By decomposing a system’s groups of composed terms into primitives of meaning, the building blocks that can be reassembled into the compositions required by …

An Extended Interoperability Framework For Joint Composability, Andreas Tolk, Charles D. Turnitsa

Computational Modeling & Simulation Engineering Faculty Publications

Interoperation of systems is defined by the aspects of integratability, interoperability, and composability. It is therefore needed, to address all levels of interoperation - from conceptual models via implemented systems to the supported infrastructure - accordingly in an interoperation framework.

Several candidates are available and provide valuable part solution. This paper evaluates the Base Object Models (BOMs), Discrete Event Simulation Specifications (DEVS), Unified Language Model (UML) artifacts as used within the Test and Training Enabling Architecture (TENA), the Object-Process Methodology (OPM), and Conceptual Graphs (CG) regarding their contribution.

Using the Levels of Conceptual Interoperability Model (LCIM), an extended interoperability framework …

Applying Model-Based Data Engineering To Evaluate The Alignment Of Information Modeled Within Jc3iedm, Msdl, And Matrex-Fom, Anil Ustun, Andreas Tolk, Saikou Diallo

Computational Modeling & Simulation Engineering Faculty Publications

The need for a common representation of entities and their relations to support the easier composition and federation of independently developed solutions in support of the user has been identified and addressed in several papers presented during recent simulation interoperability workshop. One of the underlying assumptions is that standards derived from the same conceptual domain can easily be converted into each others, as they deal with the same concepts. In a project conducted for the U.S. Army’s Program Executive Office (PEO) Soldier, three of such solutions for military operations (with focus on the land forces) were utilized to capture the …

C2 Domain Ontology Within Our Lifetime, Leslie Winters, Andreas Tolk

Computational Modeling & Simulation Engineering Faculty Publications

Agile Command and Control (C2) requires agile information sharing with an increasingly wide variety of military and non-military partners. While current net-centric approaches may improve information sharing within a particular niche of C2, they do not support information sharing across the larger C2 domain. Although not a silver bullet, the development and application of a C2 domain ontology to improve C2 data and service integration appears to be increasingly realistic. In fact, there are several examples of successful ontology applications in domains such as medicine, biology, and engineering, and the new discipline of Applied Ontology is emerging. C2 data, architecture, …

Precise Measurement Of The Neutron Magnetic Form Factor Gnm In The Few-Gev² Region, Clas Collaboration, J. Lachniet, H. Bagdasaryan, S. Bültmann, N. Kalantarians, G. E. Dodge, T. A. Forest, G. Gavalian, C. E. Hyde-Wright, A. Klien, S. E. Kuhn, M. R. Niroula, R. A. Niyazov, L. M. Qin, L. B. Weinstein, J. Zhang

Physics Faculty Publications

The neutron elastic magnetic form factor was extracted from quasielastic electron scattering on deuterium over the range Q² = 1.0–4.8  GeV² with the CLAS detector at Jefferson Lab. High precision was achieved with a ratio technique and a simultaneous in situ calibration of the neutron detection efficiency. Neutrons were detected with electromagnetic calorimeters and time-of-flight scintillators at two beam energies. The dipole parametrization gives a good description of the data

Analysis Of Possible Use Of Identification Technologies In Disassembly, Vukica Jovanović, Sreten Filipović, Gordana Ostojić, Stevan Stankovski, Milovan Lazarević

Engineering Technology Faculty Publications

The barcodes and Radio Frequency Identification tags that are being used during manufacturing, assembly, warehousing, and distribution could also be reused at the end of the product lifecycle for an identification of the correct disassembly process that would result in recycling of its components. The barcodes or RFID tags can be helpful in identifying objects in terms of sustainable development, regarding disassembly, recycling and reuse. In this paper, the analysis of the current applications of RFID Technology in the final phase of the product lifecycle will be presented. The simulation of the disassembly process supported by both barcode and RFID-enabled …

Biomedical Technology: Supporting Movement, Petros Katsioloudis

STEMPS Faculty Publications

According to the National Institute on Disability and Rehabilitation Research, an estimated 8.5 million children 21 years and younger have a disability (Jans & Stoddard, 1999). After about a decade, with the development of new and sophisticated materials (aluminum alloys, titanium alloys, and carbon fibers) and the integration of electronics, it was then possible to significantly improve the performance of prostheses, built with the so-called endo skeletal (or skeletal-modular) method (Mora, Beratni & Pedrotti, 2006).

Energy From The Skies: Empowering Future Generations, Petros J. Katsioloudis, Stella Bondi, Walter F. Deal

STEMPS Faculty Publications

The article discusses the development of photovoltaic technology. The first account of the use of solar power during war in western civilization was in the second century B.C. during the battle of Syracuse with Archimedes' famed Death Ray. In the late 1800s and early 1900s many advances occurred including the invention of solar-powered engines, the discovery of the photoconductivity of selenium and its ability to produce electricity when exposed to light, and the construction of the first solar cells from selenium wafers. Photovoltaic technology was born in the U.S. in 1954 when Daryl Chapin, Calvin Fuller, and Gerald Pearson developed …

Volume Viscosity In Fluids With Multiple Dissipative Processes, Allan J. Zuckerwar, Robert L. Ash

Mechanical & Aerospace Engineering Faculty Publications

The variational principle of Hamilton is applied to derive the volume viscosity coefficients of a reacting fluid with multiple dissipative processes. The procedure, as in the case of a single dissipative process, yields two dissipative terms in the Navier-Stokes equation: The first is the traditional volume viscosity term, proportional to the dilatational component of the velocity; the second term is proportional to the material time derivative of the pressure gradient. Each dissipative process is assumed to be independent of the others. In a fluid comprising a single constituent with multiple relaxation processes, the relaxation times of the multiple processes are …

Pressure-Driven Transport Of Particles Through A Converging-Diverging Microchannel, Ye Ai, Sang W. Joo, Xiangchun Xuan, Shizhi Qian

Mechanical & Aerospace Engineering Faculty Publications

Pressure-driven transport of particles through a symmetric converging-diverging microchannel is studied by solving a coupled nonlinear system, which is composed of the Navier-Stokes and continuity equations using the arbitrary Lagrangian-Eulerian finite-element technique. The predicted particle translation is in good agreement with existing experimental observations. The effects of pressure gradient, particle size, channel geometry, and a particle's initial location on the particle transport are investigated. The pressure gradient has no effect on the ratio of the translational velocity of particles through a converging-diverging channel to that in the upstream straight channel. Particles are generally accelerated in the converging region and then …

Dynamic Adaptation Of Joint Transmission Power And Contention Window In Vanet, Danda B. Rawat, Gongjun Yan, Dimitrie C. Popescu, Michele C. Weigle, Stephan Olariu

Electrical & Computer Engineering Faculty Publications

In this paper, we propose an algorithm for joint adaptation of transmission power and contention window to improve the performance of vehicular network in a cross layer approach. The high mobility of vehicles in vehicular communication results in the change in topology of the Vehicular Ad-hoc Network (VANET) dynamically, and the communication link between two vehicles might remain active only for short duration of time. In order for VANET to make a connection for long time and to mitigate adverse effects due to high and fixed transmission power, the proposed algorithm adapts transmission power dynamically based on estimated local traffic …

Tem Study Of Niobium Surfaces Treated By Different Polishing Techniques, A.T. Wu, D. Gu, Helmut Baumgart

Electrical & Computer Engineering Faculty Publications

TEM cross-section observation on Nb surfaces has been a challenge to our superconducting radio frequency (SRF) community due to the highly reactive nature of Nb. Although it was demonstrated in an early attempt1 that under a suitable sample preparation procedure reasonably clear cross-section images of Nb could be obtained, to the best of our knowledge good atomically resolved images had never been obtained. In this report, it is shown that by modifying the sample preparation procedure adopted in reference 1 it is possible to obtain good cross-section images of Nb surfaces with atomic resolution routinely. Surface atomic structures of Nb …

Parameter Optimization For Image Denoising Based On Block Matching And 3d Collaborative Filtering, Ramu Pedada, Emin Kugu, Jiang Li, Zhanfeng Yue, Yuzhong Shen, Josien P.W. Pluim (Ed.), Benoit M. Dawant (Ed.)

Electrical & Computer Engineering Faculty Publications

Clinical MRI images are generally corrupted by random noise during acquisition with blurred subtle structure features. Many denoising methods have been proposed to remove noise from corrupted images at the expense of distorted structure features. Therefore, there is always compromise between removing noise and preserving structure information for denoising methods. For a specific denoising method, it is crucial to tune it so that the best tradeoff can be obtained. In this paper, we define several cost functions to assess the quality of noise removal and that of structure information preserved in the denoised image. Strength Pareto Evolutionary Algorithm 2 (SPEA2) …

Automatic Diagnosis For Prostate Cancer Using Run-Length Matrix Method, Xiaoyan Sun, Shao-Hui Chuang, Jiang Li, Frederic Mckenzie, Nico Karssemeijer (Ed.), Maryellen L. Giger (Ed.)

Electrical & Computer Engineering Faculty Publications

Prostate cancer is the most common type of cancer and the second leading cause of cancer death among men in US¹. Quantitative assessment of prostate histology provides potential automatic classification of prostate lesions and prediction of response to therapy. Traditionally, prostate cancer diagnosis is made by the analysis of prostate-specific antigen (PSA) levels and histopathological images of biopsy samples under microscopes. In this application, we utilize a texture analysis method based on the run-length matrix for identifying tissue abnormalities in prostate histology. A tissue sample was collected from a radical prostatectomy, H&E fixed, and assessed by a pathologist …

Superfluid Turbulence From Quantum Kelvin Wave To Classical Kolmogorov Cascades, Jeffrey Yepez, George Vahala, Linda L. Vahala, Min Soe

Electrical & Computer Engineering Faculty Publications

The main topological feature of a superfluid is a quantum vortex with an identifiable inner and outer radius. A novel unitary quantum lattice gas algorithm is used to simulate quantum turbulence of a Bose-Einstein condensate superfluid described by the Gross-Pitaevskii equation on grids up to 5760³. For the first time, an accurate power-law scaling for the quantum Kelvin wave cascade is determined: k^-3. The incompressible kinetic energy spectrum exhibits very distinct power-law spectra in 3 ranges of k space: a classical Kolmogorov k^-(5/3) spectrum at scales greater than the outer radius of individual quantum vortex …

Quantum Algorithm For Bose-Einstein Condensate Quantum Fluid Dynamics: Twisting Of Filamentary Vortex Solitons Demarcated By Fast Poincare Recursion, Jeffrey Yepez, George Vahala, Linda L. Vahala

Electrical & Computer Engineering Faculty Publications

The dynamics of vortex solitons is studied in a BEC superfluid. A quantum lattice-gas algorithm (measurementbased quantum computation) is employed to examine the dynamical behavior vortex soliton solutions of the Gross-Pitaevskii equation (ø⁴ interaction nonlinear Schroedinger equation). Quantum turbulence is studied in large grid numerical simulations: Kolmogorov spectrum associated with a Richardson energy cascade occurs on large flow scales. At intermediate scales, a new k^-6 power law emerges, due to vortex filamentary reconnections associated with Kelvin wave instabilities (vortex twisting) coupling to sound modes and the exchange of intermediate vortex rings. Finally, at very small spatial scales a …

Optimizing Computer-Aided Colonic Polyp Detection For Ct Colonography By Evolving The Pareto Front, Jiang Li, Adam Huang, Jack Tao, Jiamin Liu, Robert L. Van Uitert, Nicholas Petrick, Ronald Summers

Electrical & Computer Engineering Faculty Publications

A multiobjective genetic algorithm is designed to optimize a computer-aided detection (CAD) system for identifying colonic polyps. Colonic polyps appear as elliptical protrusions on the inner surface of the colon. Curvature-based features for colonic polyp detection have proved to be successful in several CT colonography (CTC) CAD systems. Our CTC CAD program uses a sequential classifier to form initial polyp detections on the colon surface. The classifier utilizes a set of thresholds on curvature-based features to cluster suspicious colon surface regions into polyp candidates. The thresholds were previously chosen experimentally by using feature histograms. The chosen thresholds were effective for …

Seasonal Adaptation Of Vegetation Color In Satellite Images For Flight Simulations, Yuzhong Shen, Jiang Li, Vamsi Mantena, Srinivas Jakkula

Electrical & Computer Engineering Faculty Publications

Automatic vegetation identification plays an important role in many applications including remote sensing and high performance flight simulations. This paper proposes a novel method that identifies vegetative areas in satellite images and then alters vegetation color to simulate seasonal changes based on training image pairs. The proposed method first generates a vegetation map for pixels corresponding to vegetative areas, using ISODATA clustering and vegetation classification. The ISODATA algorithm determines the number of clusters automatically. We then apply morphological operations to the clustered images to smooth the boundaries between clusters and to fill holes inside clusters. Six features are then computed …