Engineering Commons^™

On Mitigating Distributed Denial Of Service Attacks, Zhiqiang Gao

Dissertations

Denial of service (DoS) attacks and distributed denial of service (DDoS) attacks are probably the most ferocious threats in the Internet, resulting in tremendous economic and social implications/impacts on our daily lives that are increasingly depending on the wellbeing of the Internet. How to mitigate these attacks effectively and efficiently has become an active research area. The critical issues here include 1) IP spoofing, i.e., forged source lIP addresses are routinely employed to conceal the identities of the attack sources and deter the efforts of detection, defense, and tracing; 2) the distributed nature, that is, hundreds or thousands of compromised …

Unified Architecture Of Mobile Ad Hoc Network Security (Mans) System, Li Ling

Dissertations

In this dissertation, a unified architecture of Mobile Ad-hoc Network Security (MANS) system is proposed, under which IDS agent, authentication, recovery policy and other policies can be defined formally and explicitly, and are enforced by a uniform architecture. A new authentication model for high-value transactions in cluster-based MANET is also designed in MANS system. This model is motivated by previous works but try to use their beauties and avoid their shortcomings, by using threshold sharing of the certificate signing key within each cluster to distribute the certificate services, and using certificate chain and certificate repository to achieve better scalability, less …

Constitutive Modeling Of The Thermo-Mechanics Associated With Crystallizable Shape Memory Polymers, Gautam Barot

Dissertations

This research addresses issues central to material modeling and process simulations. Here, issues related for developing constitutive model for crystallizable shape memory polymers are addressed in details. Shape memory polymers are novel material that can be easily formed into complex shapes, retaining memory of their original shape even after undergoing large deformations. The temporary shape is stable and return to the original shape is triggered by a suitable mechanism such heating the polymer above a transition temperature. Crystallizable shape memory polymers are called crystallizable because the temporary shape is fixed by a crystalline phase, while return to the original shape …

Characterization Of Hypertension Through Multivariate Analysis Utilizing Linear And Nonlinear Methods, Diane L. Donnelly

Dissertations

Analysis of blood pressure by nonlinear methods is vastly underutilized in current research. As such, 24-hour ambulatory blood pressure data from a small cohort of borderline hypertensive and normotensive subjects were analyzed using linear and nonlinear methods. Data were collected and provided by researchers from Columbia University. The cohort size was twelve subjects, consisting of two groups of six each. Although disease state was known, group membership for individual subjects was not. Therefore, one aspect of this research was to separate the cohort, a-priori, into two distinct, evenly sized groups, based solely on analysis results. Separation was accomplished by the …

Automatic Modulation Classification Of Communication Signals, Zaihe Yu

Dissertations

The automatic modulation recognition (AMR) plays an important role in various civilian and military applications. Most of the existing AMR algorithms assume that the input signal is only of analog modulation or is only of digital modulation. In blind environments, however, it is impossible to know in advance if the received communication signal is analogue modulated or digitally modulated. Furthermore, it is noted that the applications of the currently existing AMR algorithms designed for handling both analog and digital communication signals are rather restricted in practice. Motivated by this, an AMR algorithm that is able to discriminate between analog communication …

Analytical Model For Staging Emergency Evacuations, Vivek V. Korikanthimath

Dissertations

Disaster response in areas of high population density is centered on the efficient evacuation of people and possibly goods. Developing evacuation plans suitable for different levels of urgency based on the intensity of threat is a challenging task. In case of densely populated cities (e.g., New York, Los Angeles), the level of threat is enhanced by the congestion of their transportation systems, and the decision to evacuate a region simultaneously or by dividing it into multiple stages (or zones) affects the required evacuation time and associated delays.

The evolution of the traffic conditions on the evacuation route can vary significantly …

Evaluation Of Environmental Carrying Capacity And Application Of The Sustainability Target Method, Chatpet Yossapol

Dissertations

The environmental carrying capacity (CC) is defined as the capacity of the earth to absorb or tolerate potentially stressful burdens imparted at various scales and locations, that is, to accommodate the ecological stresses without showing permanent damage. The CC can be used as a reference dataset for Life Cycle Assessment (LCA) purposes and as a baseline for other environmental studies.

In this research, a set of impact-oriented U.S. CC is developed for both input- and output-related impacts. CC for eight common impact categories is evaluated: resource depletion, global warming, ozone depletion, acidification, eutrophication, photochemical ozone formation, human toxicity, and eco-toxicity. …

The Impact Of Abiotic And Biogenic Mn Oxide Coatings On Contaminant Mobility, Bioavailability, And Attenuation, Thipnakarin Boonfueng

Dissertations

Abiotic and biogenic manganese oxide coatings significantly impact the mobility and bioavailability of metals in soils and sediments. While sorption to discrete Mn oxides has been investigated in a number of studies, coatings have not received as much attention. Abiotic nanocrystalline (hydrous manganese oxide (HMO)) and crystalline Mn oxides (bimessite and pyrolusite) coated on montmorillonite were studied for formation, structure, stability, and surface properties. Coatings dominated the clay surface characteristics where the surface charge behaved similar to that of the discrete oxide and the local structure was consistent with the pure oxide phase. Furthermore, in sorption studies, Zn and Pb …

Fabrication And Characterization Of Back Illuminated Cmos Photodiode Array, Amitra Banerjee

Theses

With the rapid development in low-cost CMOS technology, silicon photodiodes are currently recognized as promising choice for the imager core. In this research, the arrays of back illuminated photodiodes were designed, fabricated and demonstrated with CMOS imager fabrication process on silicon wafers. The main purpose of this work was to improve the contribution of these arrays on the imaging systems before committing their design on the chips.

In this CMOS process, first the n-well, p-well, n+and p+ regions were simulated and fabricated by several implantation processes. The n-well region was implanted by phosphorus at an energy of 170 keV and …

Dem Simulated Floor Pressure Induced By A Granular Column, Shawn A. Chester

Theses

At the end of the 19th century, H. A. Janssen discovered that the bottom floor pressure in a cylindrical container of granular material asymptotes exponentially to a value less than the weight of the material i.e., the pressure becomes independent of the fill height of the column. This phenomenon is investigated using discrete element simulations of inelastic, frictional spheres in a cylindrical vessel having a particle-to-cylinder diameter ratio at approximately 13.3 or 26.6, with varying bed heights in both cases. The axial pressure profile and the load experienced by a piston that is supporting the granular column are computed. In …

Individual Cell Pressure Control In An Air Mattress For The Prevention Of The Pressure Sores, Kapilchandra Anand

Theses

Many kinds of pressure-relieving mattresses have been developed to prevent pressure sores in patients with spinal cord injuries (SCIs) and obesity. Current technology uses alternating air pressure mattress, foam and low pressure mattress for reducing the incidence of pressure sores in SCI and obesity patients. These mattresses do not have control of pressure in individual air chambers. They are open loop system and they do not receive any feedback from the system. They have at the most control of two different pressures. The purpose of this study is to improve the current assistive technology in reducing pressure sores and to …

Fpga-Based Implementation Of Parallel Graph Partitioning, Mohammad Kharashgeh

Theses

Graph partitioning is a very important application that can be found in numerous areas, from finite element methods to data processing and VLSI circuit design. Many algorithms have been developed to solve this problem. Of special interest is multilevel graph partitioning that provides a very efficient solution. This method can also be parallelized and implemented on various multiprocessor architectures. Unfortunately, the target of such implementations is often unavailable high-end multiprocessor systems. Here a parallel version of this method for an in-house developed multiprocessor system is implemented on an FPGA. The system designed provides a cost-effective solution.

The design is based …

In-Vitro Characterization Of Boronized Titanium Alloy By Means Of Corrosion And Electrochemical Impedance Spectroscopy Methods In Simulated Body Fluids, David Anthony Panus

Theses

Titanium and titanium alloys are becoming the backbone of medical implants and prosthetics. Titanium alloys are used because of its high biocompatibility and similarity to bone. However, titanium and titanium alloys have a low wear resistance. Titanium and titanium alloys are susceptible to particle erosion, which can cause inflammation, infection, and even implant rejection. Boronizing titanium alloy improves titanium's wear resistance and also improves corrosion resistance.

The target of this research was to characterize the corrosion characteristics of both unboronized and boronized titanium using both electrochemical corrosion methods and Electrochemical Impedance Spectroscopy (ELS) in simulated body fluid. Using electrochemical methods …

Fabrication Of Hydroxyapatite-Biodegradable Polymer Scaffolds By Electrospinning For Potential Bone Tissue Application, Satomi Suzuki

Theses

The purpose of this study is to determine the potential of combining hydroxyapatite (HA) and polymers to form synthetic composite materials used for bone tissue engineering applications. In this study, ceramic-biodegradable polymer composites are fabricated by electrospinning method. The biodegradable polymers used are poly(L-lactic acid) (PLLA), and poly(lactide-co-glycolide) (PLGA). Two types of HA-polymer solutions are first prepared to achieve HA weight percentage of 0, 10, and 25%of the total combined weight of HA and PLLA, and HA and PLGA. The solutions are electrospun to form nanofibrous mats incorporated with HA powder. A biomimetic process was also conducted as a …

Submicron Patterning Using Laser Interference Lithography, Luigi Pollara Verdoni

Theses

In this thesis, the theory, fabrication protocol, and initial results of an alternative nanopatterning technique called Interferometric Lithography (IL) are presented. Comprised of the identical process attributes of traditional projection photolithography, IL mirrors the wafer preparation and development procedures of our existing clean room capabilities. The main departure is solely in means of pattern delineation. IL is a "mask less" technique that employs the interference fringe pattern of two coherent beams, and can therefore be generated with a commercial laser. Due to its simplicity, Interferometric Lithography provides an attractive supplement to existing methods of nano-patterning.

Utilizing a 325 nm HeCd …

A Wireless Method For Monitoring Medication Compliance, Jeffrey Scott Jonas

Theses

There are many devices on the market to help remind patients to take their pills, but most require observation by a caregiver to assure medication compliance. This project demonstrates three modes to detect pill removal from a pillbox: a switch under the pills, a reflective type photointerrupter and a transmissive "electric eye" photosensor. Each mode exhibited blind spots or other failures to detect pill presence, but by combining modes with complementary characteristics, the accuracy of pill detection is greatly increased.

Two methods of caregiver notification are demonstrated: text messages transmitted via an attached cellular phone, or the status is collected …

Characterization Of Thermally Diffused Bordie Layers On Aisi 1018 Steel : Residual Stresses (By Synchrotron Radiation) And Microhardness, Joel A. Payne

Theses

Boronization is a thermal diffusion process in which needle like boride layers are formed at the surface of the metallic substrate. The boride coatings formed by the diffusion process have high hardness and strong ware and corrosion resistance. In order for coatings of this nature to be industrially successful, their service life should be long and characterization should be extensive. Measuring the residual stresses of the coatings caters to each of these aspects.

In this study, AISI 1018 steel samples were boronized by a powder-pack process for four hours at 850°C in an argon atmosphere. Characterization techniques included coating thickness, …

Advanced Methods In Automatic Modulation Classification For Emerging Technologies, Hong Li

Dissertations

Modulation classification (MC) is of large importance in both military and commercial communication applications. It is a challenging problem, especially in non-cooperative wireless environments, where channel fading and no prior knowledge on the incoming signal are major factors that deteriorate the reception performance. Although the average likelihood ratio test method can provide an optimal solution to the MC problem with unknown parameters, it suffers from high computational complexity and in some cases mathematical intractability. Instead, in this research, an array-based quasi-hybrid likelihood ratio test (qHLRT) algorithm is proposed, which depicts two major advantages. First, it is simple yet accurate enough …

Medium Access Control Design For All-Ip And Ad Hoc Wireless Network, Zaihan Jiang

Dissertations

Medium Access Control (MAC) protocol in a wireless network controls the access of wireless medium by mobile terminals, in order to achieve its fair and efficient sharing. It plays an important role in resource management and QoS support for applications. All-IP wireless WAN is fully IP protocol-based and it is a strong candidate beyond 3G (Third Generation Wireless Network). Ad hoc wireless network has recently been the topic of extensive research due to its ability to work properly without fixed infrastructure.

This dissertation is composed of two main parts. The first part pursues a Prioritized Parallel Transmission MAC (PPTM) design …

Dynamic Bandwidth Management With Service Differentiation Over Ethernet Passive Optical Networks, Yuanqiu Luo

Dissertations

Ethernet passive optical networks (EPONs) address the first mile of the communication infrastructure between the service provider central offices and the customer sites. As a low-cost, high speed technology, EPONs are deemed as the solution to the bottleneck problem of the broadband access network.

A major feature of EPONs is the utility of a shared upstream channel among the end users. Only a single optical network unit (GNU) may transmit during a timeslot to avoid data collisions. In order to provide diverse quality of service (QoS), the bandwidth management of the upstream channel is essential for the successful implementation of …

H-Simd Machine : Configurable Parallel Computing For Data-Intensive Applications, Xizhen Xu

Dissertations

This dissertation presents a hierarchical single-instruction multiple-data (H-SLMD) configurable computing architecture to facilitate the efficient execution of data-intensive applications on field-programmable gate arrays (FPGAs). H-SIMD targets data-intensive applications for FPGA-based system designs. The H-SIMD machine is associated with a hierarchical instruction set architecture (HISA) which is developed for each application. The main objectives of this work are to facilitate ease of program development and high performance through ease of scheduling operations and overlapping communications with computations.

The H-SIMD machine is composed of the host, FPGA and nano-processor layers. They execute host SIMD instructions (HSIs), FPGA SIMD instructions (FSIs) and nano-processor …

Effect Of Polymorphic Phase Transformations Within An Alumina Layer On The Ignition Of Aluminum Particles, Mikhaylo Aleksiyovych Trunov

Dissertations

Experimental measurements of aluminum ignition temperature and models used to describe aluminum ignition are reviewed. It is shown that the current models cannot describe ignition of aluminum powders of different sizes and ignited under various experimental conditions. The properties of and phase changes occurring in the alumina scale existing on the surface of aluminum particles at different temperatures are systematically studied. The mechanism of aluminum oxidation is quantified and a new simplified ignition model is developed.

Thermogravimetry was used to study the oxidation of aluminum powders of various particle sizes and surface morphologies in oxygen at temperatures up to 1500°C. …

Synthesis And Characterization Of Mechanically Alloyed Aluminum-Based Compounds As High Energy Density Materials, Xiaoying Zhu

Dissertations

A new type of metastable reactive powders for potential use as high energy density materials in propellants, explosives, and pyrotechnics was developed. These powders are intended to replace aluminum typically added to energetic formulations to increase reaction enthalpy and temperature. The new materials are metastable aluminum-based alloys, which enable achievement of substantially reduced ignition temperatures and accelerated bulk burn rates compared to aluminum. Titanium and lithium were used as alloying components. The materials properties and characteristics leading to their enhanced combustion performance were investigated. The powders were prepared using mechanical alloying and characterized using X-Ray Diffraction (XRD), Scanning Electron Microscopy …

Cross-Layer Design For Wireless Sensor Relay Networks, Lichuan Liu

Dissertations

In recent years, the idea of wireless sensor networks has gathered a great deal of attention. A distributed wireless sensor network may have hundreds of small sensor nodes. Each individual sensor contains both processing and communication elements and is designed in some degree to monitor the environmental events specified by the end user of the network. Information about the environment is gathered by sensors and delivered to a remote collector.

This research conducts an investigation with respect to the energy efficiency and the cross-layer design in wireless sensor networks. Motivated by the multipath utilization and transmit diversity capability of space-time …

Applications Of Room Temperature Ionic Liquids In Interfacial Polymerization, Lining Zhu

Dissertations

Room temperature ionic liquids (ILs), with their unique physical and chemical properties, have been of great interest in various areas of chemical science and engineering during the last decade. In this dissertation, polyurea and polyamide films with surface nanostructures were synthesized by interfacial polymerization (IP) with ILs without stirring. Both polymers were prepared at the interface between n-hexane and a series of 1 -alkyl-3-methylimidazolium ILs.

Nanoporous or nanofibrous polymer morphologies with various sizes ranging from 50 to 500 nm and geometries, depending on the ILs used, were observed by scanning electron microscopy (SEM). A correlation length of ~20nm and a …

Auto Detection In Autism, Gayathri Chandar

Theses

Autism is a neurobiological disorder in which, certain regions of the brain are affected. The main features of autism are impairment in communication, social interaction, language and deficit in imitation and theory of mind. Using Functional Magnetic Resonance Imaging (fMRI), haemodynamic responses during a bilateral finger tapping task are analyzed for both autistic subjects and normal control subjects. fMRI is a noninvasive technique to image the activity of the brain related to a specific task. Generally, the active voxels in the IMRI images are detected using parametric or non-parametric statistical methods in which the fMRI response is assumed to have …

Osteogenic Differentiation Of Human Mesenchymal Stem Cells On Thin Film Tyrosine Derived Polycarbonates, Tamunotoyne Briggs

Theses

Mesenchymal stem cells, harvested from adult bone marrow, are promising in the field of regenerative medicine because of the vast differentiation potential into various cell lines such as: osteoblasts, chondrocytes, adipocytes, and neurons. Osteogenic differentiation of human mesenchymal stem cells (hMSC) could be an important tool in the treatment of orthopedic deficiencies such as bone defects. The extent of in vitro human mesenchymal stem cell growth, adhesion, motility and differentiation into osteoblasts is a function of the material surface chemistry which is mediated by protein adsorption onto the surface. A library of tyrosine derived polycarbonates allows the tailoring of material …

The Complex Behavior Of Poly(Dte) Carbonate And Its Blend Properties, Christopher George Elvin

Theses

Over the years a number of different polymers have been studied for bone applications. Polyesters such as the poly lactic acids (PLA), poly glycolic acids (PGA), and their copolymers have been studied intensely for bone regeneration purposes. Poly(DTE)carbonate has been found useful for bone regenerative purposes and is under review by the U.S. Food and Drug Administration.

The purpose of this study was to investigate the properties of poly(DTE)carbonate when PLLA, PLGA, and P(LcoDL)LA was blended with it. The desired outcome was to produce miscible polymer blends or significant phase shift in the blended materials which will make them at …

Automatic Detection Of Qt And Related Intervals, Divya Gowdar

Theses

The objective of this thesis is divided into two main sections: The first section comprises of the development of the algorithm for the detection of the Q wave, Tmax afld the Tend to measure the intervals such as QT, QT corrected (QTc), RT, QT_max and RT_max respectively. The second section deals with the analysis of different variabilities including heart rate variability (HRV), QT, QTc, RT, QT_max and RT_max.

Using the R wave points as reference points, the Q wave was detected by using the Differential Threshold Method (DTH). The Tmax was detected by using a …

Development Of A System To Measure Cardiac Function In The Drosophila Melanogaster Animal Model, Heather Anne Reinhardt

Theses

Previous studies have shown that several genes are evolutionarily conserved from lower organisms to man, where a number of genes have been directly linked to cardiac function and disease. The Drosophila melanogaster (Fruit Fly) has a genome similar to humans and therefore has proven to be an important animal model to study the role of genetics in cardiac function and disease development. Fruit flies are an important basic science model because of the ease with which genes can be manipulated and quickly expressed due to the short lifespan of the fly. Although standard techniques exist to affect the genome of …