Engineering Commons^™

Using Nursing Theory To Improve The Teaching Of Engineering Practice, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Engineering education includes both classroom training in sciences and professional skills as well as learning-through-doing to integrate practice and engineering design into the future licensed Professional Engineer (PE). In a similar manner, nursing education includes both classroom training in sciences and professional skills as well as learning through doing to integrate practice and caring into the future licensed Registered Nurse (RN). From the mid-19th century until modern day, the fields of environmental engineering and community health nursing have worked side-by-side to prevent disease while promoting health and wellness. This paper provides a synthesis of previously published case studies by the …

Diplomacy Lab Provides Term-Length Group Projects Integrating Policy Analysis And Liberal Arts Into The Traditional Engineering Classroom, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Science in diplomacy, the use of trained scientist to inform and support foreign policy objectives, has been a part of U.S. foreign policy since the time of Benjamin Franklin. The Diplomacy Laboratory project, a public-private partnership, allows the Department of State to 'course source' projects to seek input from universities and to recruit talented students to consider careers in diplomacy. This paper provides a summary of a case study using a DipLab project as part of a term-length, writing assignment in courses for undergraduate and graduate environmental engineering students. An overview of DipLab and suggested best practices to integrate DipLab …

Reducing Costs While Maintaining Learning Outcomes Using Blended, Flipped, And Mastery Pedagogy To Teach Introduction To Environmental Engineering, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

As part of a cost-savings initiative, an existing course of 'introduction to environmental engineering' offered using a 'traditional' format of didactic class meetings supplemented with hands-on laboratory sessions, was changed significantly. The 'modified' format uses 'blended', 'flipped', and 'mastery' approaches to teach "2601: Fundamentals of Environmental Engineering" to approximately 60 sophomores pursuing baccalaureate degrees in environmental, civil, or architectural engineering, each semester. This paper presents a summary of the results from eight course offerings over a period of four years to more than 450 total students. Assessments included student grades; open-ended invitations for anonymous feedback at the end of each …

Educating The Professional Engineer Of 2020: The Changing Licensure Requirements, Susan L. Murray, Terri M. Lynch-Caris

Engineering Management and Systems Engineering Faculty Research & Creative Works

Engineering education programs would be well served to align their curricula and program outcomes to the Fundamentals of Engineering (FE) Exam and Professional Engineer (PE) Exam specifications. These exams are required steps in the process of becoming a licensed engineer in most states. NCEES (the National Council of Examiners for Engineering and Surveying) is a national nonprofit organization dedicated to advancing professional licensure for engineers and surveyors. It develops, administers, and scores these examinations used for engineering licensure. Starting in 2011, NCEES held survey-creation meetings with diverse teams to develop a draft survey containing the subjects in each discipline and …

Electronic Flashcards As A Tool To Improve Exam Readiness, Susan L. Murray, Julie Phelps

Engineering Management and Systems Engineering Faculty Research & Creative Works

Many college classes have basic information that must be learned before students can master the more complex application and analysis of advanced ideas in the class. Students often struggle with identifying and learning these facts, terms, and principles. This paper reports on a project that evaluated the use of electronic flashcards in two undergraduate engineering classes. The study materials (online flashcards) were developed in conjunction with the university's Educational Technology Office.

An Inverted Teaching Model For A Mechanics Of Materials Course, Jeffery S. Thomas, Timothy A. Philpot

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Instructors at Missouri University of Science and Technology have been offering certain sections of a mechanics of materials course in an inverted format for the past two years. In this format, students learn the concepts outside of class, using a textbook, animations and videos developed by the authors, and work on homework either individually or in groups during the optional class time. Students take eight multiple-choice exams and a final exam that is common to both the inverted sections and the more traditional lecture-based sections. Homework in the inverted sections is assigned but not graded. The in-class exams are given …

Using Student Ambassadors To Relay Themes From Changing The Conversation In Engineering First Year Seminars, Sarah Rzasa Zappe, Melissa Marshall, Enrique D. Gomez, Esther W. Gomez, Angela D. Lueking

Chemical and Biochemical Engineering Faculty Research & Creative Works

This paper describes the efforts at a large mid-Atlantic university to integrate themes from Changing the Conversation into First Year Seminars. Changing the Conversation, a 2008 book by the National Academy of Engineering, found that both male and female students were more attracted to messages describing engineering in terms relating to societal impact, such as the phrases, "Engineering makes a world of difference" and "Engineering is essential to our health, happiness, and safety." Although the research was conducted with younger students, the potential for using these themes in the undergraduate curricula could have the potential to impact persistence in engineering, …

Missouri S&T Engineering Management Capstone Senior Design: Lessons Learned And Challenges To Come, Stephen A. Raper

Engineering Management and Systems Engineering Faculty Research & Creative Works

A more traditional, capstone senior design course was recently added as a requirement for Engineering Management undergraduates in the Engineering Management & Systems Engineering Department at Missouri S&T. The case studies course that had served that purpose was deemed to be insufficient for ABET accreditation purposes by department faculty. The most recent 2008 accreditation visit for the department verified this belief and caused the department to launch the new class earlier than anticipated to prove the class would be taught and that it would meet required standards. Thus, no weaknesses or concerns were noted in this area in the final …

Strategies For Using Technology When Grading Problem-Based Classes, Susan L. Murray, Ruwen Qin, Ivan G. Guardiola, Abhijit Gosavi

Engineering Management and Systems Engineering Faculty Research & Creative Works

More and more work is being done today using technology. Email and digital drop boxes are useful tools for professors; however the challenge comes when one is teaching a quantitative class. The issue of using technology to manage work in a quantitative class is increasing as more engineering programs embrace distance education. In this paper we will review the advantages and disadvantages of several methods of collecting, grading, and returning homework assignments to students. The techniques considered include faxing, PDF grading using a Wacom Tablet, and various email approaches. Student survey results are also included in the paper.

Engineering Education Collaboration: Innovative Pedagogical Methods For High School And University Environmentalists, Leslie Hadaway, Megan Urbaitis, Regina Lamendella, Daniel B. Oerther, Andrea C. Burrows, Mike Borowczak, Anant R. Kukreti

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents an innovative teaching approach, how it is implemented, student response results of the implementation, and the assessment of impact on student learning. The findings are based on surveys given to the students after each lab lesson taught in partnership with university (Project STEP) and community members. The purpose of this paper is to showcase authentic molecular technology research methods that have been incorporated into a high school level water quality study in cooperation with a watershed restoration program. Typically, water quality studies focus on chemical analysis such as pH, dissolved oxygen, biochemical oxygen demand, orthophosphates, nitrates, temperature, …

What New Faculty Need To Know, But Don't Know To Ask, Susan L. Murray, Elizabeth A. Cudney, Suzanna Long, Katie Grantham

Engineering Management and Systems Engineering Faculty Research & Creative Works

A smooth transition to life at an academic institution and the surrounding community is essential to the professional careers of new faculty members. The transition begins during the hiring process and startup package negotiations. Once at an institution, aspects of academia including teaching, proposal writing, and the tenure process inevitably generate issues and concerns for new faculty members. Research has shown that mentoring new faculty members early in their academic career can have significant impact on professional success. This is especially true at a research-based institution where the demands of funded scholarship add an extra level of complexity. A survey …

Encouraging Lifelong Learning For Engineering Management Undergraduates, Susan L. Murray, Stephen A. Raper

Engineering Management and Systems Engineering Faculty Research & Creative Works

The current ABET guidelines place an emphasis on life-long learning for our undergraduate students. What is life-long learning? How can we encourage students to consider global issues, current events, or even anything "that isn't going to be on the next test"? In this paper we present survey results evaluating habits of undergraduate students entering an engineering management program and seniors related to life-long learning including attending professional society meetings, reading trade publications, reading business related books, and other learning outside of the classroom activities. This paper also presents a two semester effort to increase life-long learning activities among undergraduate engineering …

Engineering Management And Industrial Engineering: Similarities And Differences, Cassandra C. Elrod, Ashley Rasnic, William Daughton

Business and Information Technology Faculty Research & Creative Works

Engineering Management is a broad and diverse field of engineering, thereby making it difficult to define exactly what the degree encompasses. At the same time, the somewhat related degree of Industrial Engineering is better understood. Some universities offer a Bachelor of Science degree in Engineering Management with an emphasis in Industrial Engineering, while others offer a Bachelor of Science degree in Industrial Engineering with an emphasis in Engineering Management. In today's world of competitive academia, many wonder if these degree fields are similar enough to be used interchangeably or if there is a distinct difference separating the two degrees, making …

A Matter Of Priorities: Effects Of Increased Opportunities For Extracurricular And Non-Traditional Learning Experiences On Student Time Management And Attitudes, David Spurlock, Daniel J. Bailey, Susan L. Murray, Andrew S. Ricke

Engineering Management and Systems Engineering Faculty Research & Creative Works

Many schools are emphasizing non-traditional and extracurricular learning experiences for undergraduate engineering students. These include activities such as incorporating servicelearning projects into the classroom, involving students in design competitions (e.g., solar car, formula car races), and promoting involvement in traditional campus organizations. Often this emphasis is in response to changes in ABET requirements, desires of future employers, and needs to improve student retention. What are the effects of emphasizing these sorts of activities on student attitudes and time management decisions? We examine the influences on students' priorities for allocating their time and their perceptions of the relative importance of available …

Increasing Student Commitment To Class Preparation, Susan L. Murray

Engineering Management and Systems Engineering Faculty Research & Creative Works

Most of us know the rule-of-thumb that students should spend a certain number of hours outside of class studying for every hour in class. Unfortunately, students often develop the view that it is more efficient to come to class and have the instructor cover the material and then only study material that was emphasized or unclear. As faculty members this results in the dilemma of either assuming the students are not prepared and lecturing over basic material or trying to require the students to prepare. Some use readiness quizzes covering the required readings. Some try to intimidate, calling on students …

Investigating Student Interest In Post-Secondary Stem Education, Anant R. Kukreti, Shafiqul Islam, Daniel B. Oerther, Karen C. Davis, Mark G. Turner, Catherine V. Maltbie, Thaddeus W. Fowler

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Interest among students for post-secondary STEM education and causes behind the declining enrollment rate was analyzed. A K-12 survey was developed at the University of Cincinnati to gather information directly from students to verify the teachers' statements regarding K-12 students' perceptions of the engineering profession and studying engineering in college. The K-12 student survey respondents indicated that about 28% of the 6-12 graders were interested in engineering. The survey also showed that students wanted to be an engineer because it was a stable living.

Penn State University Nsf Gk-12 Project: Using Web-Based Education And Interaction With K-12 And College Freshman To Promote Science And Engineering, Elana M. Chapman, Angela D. Lueking, Robin A. Tallon, Philip H. Henning, William S. Carlsen, Daniel C. Haworth

Chemical and Biochemical Engineering Faculty Research & Creative Works

Penn State University has hosted an NSF-sponsored GK-12 Outreach project for the past five years, and has just begun the second phase of the project. The Penn State project utilizes the talents of many science and engineering graduate students as teachers, mentors and role models for the K-12 classrooms. The project focuses on developing skills of students in the areas of science, technology, engineering and mathematics through the use of Advanced Transportation Technologies. A new project component was devised and implemented-the interaction of K-12 students with college freshman via a website project. The college freshmen were asked to create a …

Integrating Biological Principles In Environmental Engineering Education: Summary Results Of A Three-Year Pilot Study, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Teaching biology to engineers is a challenge. For environmental engineers, biological principles are necessary to understand microorganisms that are removed from drinking water as well as microorganisms that treat waste in sewage treatment plants and bioremediation field sites. At the University of Cincinnati, we integrated state-of-the-art research in environmental microbiology within our graduate and undergraduate environmental engineering curricula. For the past three years, we taught a novel course entitled, "Molecular Biology in Environmental Engineering." Course evaluations over the past three years suggested that the course was successful for primarily two reasons, namely: (1) the course employed a problem-based learning approach …

Environmental Sustainability Education At The University Of Michigan: Collaboration With Industry To Provide Experiential Learning Opportunities, Angela D. Lueking, Deborah A. Ross, Walter Weber Jr

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Concentrations in Environmental Sustainability (ConsEnSus) Program at the University of Michigan is a new multi-disciplinary opportunity for graduate students in the College of Engineering to pursue interests in environmental sustainability white obtaining a traditional engineering Master's degree. Students from several engineering departments complement traditional disciplinary course requirements with courses in environmental regulations, policies, and technology. A required case studies course of the ConsEnSus Program brings practicing engineers together with students to discuss real-world sustainability problems. The industrial participants interactively present relevant case studies, and provide opportunities for experiential learning through classroom activities and term projects. This paper …

Nsf Ccli: Developing A Molecular Biology Lab Course In Environmental Engineering And Science, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A new course and associated short course, to teach molecular biology skills to undergraduate and graduate students in environment engineering and practitioners of environmental engineering across the state of Ohio and around the world, is developed. Environmental engineers use microorganisms as biocatalysts to degrade pollutants in sewage as well as in the sites undergoing bioremediation. A series of courses to introduce engineering students to the principles of biology, at the University of Cincinnati are developed. These courses include, 'introduction to environmental engineering', required for all third year civil engineering students.

Introducing Molecular Biology To Environmental Engineers: Through Development Of A New Course, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The introduction of a course "Molecular Methods in Environmental Engineering" is discussed. The course is developed to address the growing national need for integrating geonomics and molecular biology into the engineering curriculum. Fifteen graduate students were successfully introduced to molecular biology through lectures and hands-on laboratory excercises following the "full-cycle 165 rRNA approach". The course helps in providing supportive and independent learning environment to the students.

Engineering Management At Umr -- Alumni Voices, Stephen A. Raper

Engineering Management and Systems Engineering Faculty Research & Creative Works

The Department of Engineering Management at the University of Missouri-Rolla is among the oldest of its kind in the United States, and has over 2000 Bachelors level alumni graduates. The Department will undergo ABET accreditation under the new assessment based criteria in the fall of 2002. The new criteria specify that engineering programs should seek to continuously improve their degree offerings through an ongoing assessment process that includes constituent input. Our own department has specified undergraduate alumni as one of the prime or key constituents that will be queried for input into our own processes. For the first time in …

Principles Of Biology In Environmental Engineering: Molecular Biology-Based Identification Of Microorganisms, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The various aspects of a course on use of technology from molecular biology to screen microorganism in environmental samples and to monitor microbial biocatalysts in reactors, is discussed. The objective of the course is to teach students to adapt techniques from molecular biology to address important issues in environmental engineering. In case of methanogens, design considerations in environmental engineering include stabilization of sewage sludge through anaerobic digestion and wastewater treatment. The hands-on format encourages students to develop scientific questions, learn appropriate methodology, conduct careful experimentation, and draw conclusions worthy of presentation.

Incorporating Web-Based Homework Problems In Engineering Dynamics, Ralph E. Flori, David B. Oglesby, Timothy A. Philpot, Nancy E. Hubing, Richard H. Hall, Vikas Yellamraju

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

We are involved in a project funded by the Department of Education (FIPSE) which focuses on developing interactive software to improve the teaching and learning of engineering statics, dynamics, and mechanics of materials. This paper presents an overview of this project, discusses its objectives, and focuses on one particular aspect of the project.the use of web-based homework problems as assessment tools to evaluate student learning. The overall project includes creating, for all three engineering mechanics courses, the following web-based learning tools: (a) Animated theory modules, using Macromedia.s Flash development software, which display basic theory and example problems in an engaging, …

Interactive Virtual Laboratory For Experience With A Smart Bridge Test, Elizabeth C. Eckhoff, Vicki M. Eller, Steve Eugene Watkins, Richard Hall

Electrical and Computer Engineering Faculty Research & Creative Works

Virtual laboratory experiments can be cost effective, convenient instructional resources that have appeal to a wide range of learning styles. Expensive, time-consuming laboratory tests can be experienced repeatedly and remotely using interactive simulations and original video footage or animations. A virtual experiment can incorporate meaningful exercises, procedural options, and background hyperlinks to create a comprehensive "hands on" environment. Also, it may be used as preliminary training for the actual experiment.

An interactive LabVIEW-based laboratory for a load test simulation of an existing demonstration bridge was created. This smart truss bridge is instrumented with fiber optic strain sensors situated on the …

Retention Of Female Faculty Members, Susan L. Murray, Mariesa Crow, Suzanna M. Rose

Engineering Management and Systems Engineering Faculty Research & Creative Works

The recruitment and the retention of female undergraduate and graduate students into engineering courses is discussed. A similar challenge lies in recruiting female faculty member from the limited pool of candidates in several fields at most universities. It is found that about half the females who were hired did not stay at the university. It is suggested that programs should be introduced to encourage mentoring and career development as such improvements would benefit all faculty members both female and male.

The Effectiveness Of An On-Line Graduate Engineering Management Course, Rosemarie Maffei Evans, Madison Daily, Susan L. Murray

Engineering Management and Systems Engineering Faculty Research & Creative Works

In the summer of 1997, the Engineering Management Department of the University of Missouri-Rolla's (UMR) began offering its first Internet-based graduate level course. This course, Advanced Production Management, was designed to utilize a combination of Internet-based tools, such as EMail and Chat rooms to create a alternative means for the delivery of course material. This paper will draw these following conclusions from more than a year of research, which included over 100 students in six different course offerings. First, the Internet-based students performed equally as well as the control group students. Second, students tend to have exaggerated time requirement expectations …

A Mentoring Guide For Female Faculty In Engineering, Susan L. Murray, Linda M. Manning, Catherine A. Riordan, Elizabeth Cummins, Philip B. Thompson

Engineering Management and Systems Engineering Faculty Research & Creative Works

One widely accepted method for increasing the chances of success of female engineering and science students and faculty alike is to provide access to female role models and mentors. In this article we offer to new female faculty, and to those who would mentor them, an annotated list of text and electronic resources that address most of the most important challenges facing new female faculty in science and engineering.

A Technology Assessment Survey For Web Based Higher Education Programs, Earl A. Evans, Susan L. Murray

Engineering Management and Systems Engineering Faculty Research & Creative Works

Advances in communications and computer technology, as well as in human-computer interfaces, have enabled concurrent advances in Web-based education. A number of case studies concerning applications of Web-based education for both distance learning and on-campus programs have been published. Primarily, these studies have focused on individual assessments of the web-based technologies. In contrast, this paper will provide a broad based assessment of applied web-based technology for higher education. This research was conducted via a survey completed by university and college faculty from numerous 4-year institutions. To gain an effective assessment, eleven categories of web-based course delivery tools, such as chatrooms …

Effectiveness Of An On-Line Graduate Engineering Management Course: A Preliminary Study, Rosemarie Maffei Evans, Madison Daily, Susan L. Murray

Engineering Management and Systems Engineering Faculty Research & Creative Works

In the summer of 1997, the University of Missouri-Rolla's (UMR) Engineering Management Department began offering its first completely Web-based course. This graduate level course, Advanced Production Management, was designed to utilize a combination of Web-based tools to create a conducive, yet non-traditional, learning environment for its students. The students in the course did not physically have to attend any lectures and only met for an initial and final class period. The remainder of the course was conducted exclusively via Web-based tools. Accordingly, the Engineering Management Department commenced a research effort to determine the effectiveness of this new learning environment. This …