Engineering Commons^™

Control Of Single- And Dual-Probe Atomic Force Microscopy, Muthukumaran Loganathan

Doctoral Dissertations

“Atomic force microscope (AFM) is one of the important and versatile tools available in the field of nanotechnology. It is a type of probe-based microscopy wherein an atomically sharp tip, mounted on the free end of a microcantilever, probes the surface of interest to generate 3D topographical images with nanoscale resolution. An integral part of the AFM is the feedback controller that regulates the probe deflection in the presence of surface height changes, enabling the control action to be used for generating topographical image of the sample. Besides sensing, the probe can also be used as a mechanical actuator to …

Additive Manufacturing Of Glass Using A Filament Fed Process, Junjie Luo

Doctoral Dissertations

"There are many scientific and engineering applications of glass including optics, communications, electronics, and hermetic seals, there has been minimal research towards the Additive Manufacturing (AM) of transparent glass parts. The special thermal and optical properties of glasses make them hard to be printed using conventional AM techniques. In this dissertation, two different AM techniques for glass AM were developed, Selective Laser Melting (SLM) and filament fed process.

Semi-transparent parts were printed with SLM process. However, the filament fed process was found to be more robust and promising for printing optically transparent glass parts. Therefore, this dissertation is focused on …

The Effect Of Testing Conditions On Lost Circulation Materials' Performance In Simulated Fractures, Montri Jeennakorn

Doctoral Dissertations

"Lost circulation (LOC) problems increase costs of drilling significantly. It is not only the cost of the drilling fluid that is lost into the formation but also the costs of subsequent problems that can be higher than the cost of the drilling fluids. LOC also possibly leads to a serious risk of blowout incident.

Lost circulation materials (LCM) are regularly added to the drilling fluids with an expectation of plugging the flow path. Due to the difficulties of testing and monitoring LCM sealing processes in the field, LCM evaluation in the laboratory is often used to prove and assure successful …

Remote Sensing And Localization Of Smart Rocks With Orientation-Controlled Magnets For Real-Time Monitoring Of Bridge Scour And Riprap Effectiveness, Yan Tang

Doctoral Dissertations

"This study aims to develop and implement a novel smart rock technology for real-time monitoring of the maximum scour depth and the effectiveness of riprap mitigation measures. A smart rock is one or more stacked magnets encased in concrete that can automatically roll to the deepest point of a scour hole around a bridge pier and provide its location through remote measurement over time. Once integrated into a riprap measure, the smart rock moves together with natural rocks and is thus a potential indicator of the effectiveness of the riprap measure. Therefore, the localization and movement of smart rocks were …

Novel Applications Of Pulse Pre-Pump Brillouin Optical Time Domain Analysis For Behavior Evaluation Of Structures Under Thermal And Mechanical Loading, Yi Bao

Doctoral Dissertations

"This study aims to: (1) develop an analytical model for the strain transfer effect of distributed fiber optic sensors in a uniform or non-uniform stress field; (2) develop a measurement approach to monitor strains in concrete and detect damage (e.g. crack and delamination) in bonded and unbonded concrete overlays; (3) characterize the strain and temperature sensitivities of distributed fiber optic sensors at elevated temperatures; (4) develop a thermal annealing approach to enhance the thermal stability and temperature sensitivity of the distributed sensors; and (5) apply the distributed sensors to assess structural behaviors of concrete and steel structures exposed to fire. …

Event-Triggered Near Optimal Adaptive Control Of Interconnected Systems, Vignesh Narayanan

Doctoral Dissertations

"Increased interest in complex interconnected systems like smart-grid, cyber manufacturing have attracted researchers to develop optimal adaptive control schemes to elicit a desired performance when the complex system dynamics are uncertain. In this dissertation, motivated by the fact that aperiodic event sampling saves network resources while ensuring system stability, a suite of novel event-sampled distributed near-optimal adaptive control schemes are introduced for uncertain linear and affine nonlinear interconnected systems in a forward-in-time and online manner.

First, a novel stochastic hybrid Q-learning scheme is proposed to generate optimal adaptive control law and to accelerate the learning process in the presence of …

Optimal Design And Freeform Extrusion Fabrication Of Functionally Gradient Smart Parts, Amir Ghazanfari

Doctoral Dissertations

"An extrusion-based additive manufacturing process, called the Ceramic On-Demand Extrusion (CODE) process, for producing three-dimensional ceramic components with near theoretical density was developed. In this process, an aqueous paste of ceramic particles with a very low binder content (<1 vol%) is extruded through a moving nozzle at room temperature. After a layer is deposited, it is surrounded by oil (to a level just below the top surface of most recent layer) to preclude non-uniform evaporation from the sides. Infrared radiation is then used to partially, and uniformly, dry the just-deposited layer so that the yield stress of the paste increases and the part maintains its shape. The same procedure is repeated for every layer until part fabrication is completed. Sample parts made of alumina and fully stabilized zirconia were produced using this process and their mechanical properties including density, strength, Young's modulus, Weibull modulus, toughness, and hardness were examined. Microstructural evaluation was also performed to measure the grain size, and critical flaw sizes were obtained. The results indicate that the proposed method enables fabrication of geometrically complex parts with superior mechanical properties. Furthermore, several methods were developed to increase the productivity of the CODE process and enable manufacturing of functionally graded materials with an optimum distribution of material composition. As an application of the CODE process, advanced ceramic components with embedded sapphire optical fiber sensors were fabricated and properties of parts and sensors were evaluated using standard test methods"--Abstract, page iv.

Pillar Design For St. Peter Sandstone Formation, Francis Anohomah Arthur

Doctoral Dissertations

"Silica sands produced primarily from St. Peter Sandstone are used for hydraulic fracturing in the petroleum industry, glassmaking, chemicals, ceramics, filtration and the foundry industry in the US. The recent high demand for silica sands for hydraulic fracturing has triggered increased production and commissioning of new silica sand mines to support natural gas production from shale and tight gas deposits in the US. Most mines use surface mining methods to extract St. Peter Sandstone. The room and pillar mining method has been successfully used for St. Peter Sandstone mining in a few US locations, however, no one has proposed a …

Magneto Inductive Communication System For Underwater Wireless Sensor Networks, Niaz Ahmed

Doctoral Dissertations

"Underwater wireless sensor networks have found a number of applications in underwater environment monitoring, infrastructure monitoring, military applications and ocean exploration. Among the four possible means of underwater wireless communication, namely acoustic, electromagnetic (EM), magneto-inductive (MI) and optics communication, MI communication enjoys the advantages of being low cost and robust equally in air, water and soil. This dissertation presents design and implementation of a low-power and low-cost MI sensor network node that is suited for long-term deployment of underwater and underground infrastructure monitoring, such as bridge scour and levee scour monitoring. The designed MI sensor node combat the directionality of …

Application Of Nearly Linear Solvers To Electric Power System Computation, Lisa L. Grant

Doctoral Dissertations

"To meet the future needs of the electric power system, improvements need to be made in the areas of power system algorithms, simulation, and modeling, specifically to achieve a time frame that is useful to industry. If power system time-domain simulations could run in real-time, then system operators would have situational awareness to implement and avoid cascading failures, significantly improving power system reliability. Several power system applications rely on the solution of a very large linear system. As the demands on power systems continue to grow, there is a greater computational complexity involved in solving these large linear systems within …

The Use Of Geophysical Methods For Dam Seepage Investigations And Dredged Oyster Deposit Characterization, Stanley Chinedu Nwokebuihe

Doctoral Dissertations

"The dissertation is made up of three papers, which discuss the utility of geophysical tools in earthfill dam investigations and dredged oyster bed characterization.

In the first paper, an earthfill dam in Warren County, Missouri was effectively investigated for seepage through the dam and its outlet works using an integration of the electrical resistivity tomography, induced polarization and spontaneous potential geophysical tools. Recommendations were subsequently made based on the results of the study on grout locations to prevent further seepage. In the second paper, a similar study of earthfill dam seepage was conducted on a different dam in Southern Missouri. …

Environmental Hazard Identification, Assessment And Control For A Sustainable Maritime Transportation System, Lizzette Marie Pérez Lespier

Doctoral Dissertations

"A demand exists to contribute towards the widening awareness of the need for sustainable maritime development and for coordinated maritime policies worldwide. Maritime shipping is considered the most eco-efficient mean of transportation and yet, is responsible for negative environmental impacts.

This dissertation focuses on developing data-driven decision support tools to evaluate the sustainable performance of MTS by focusing on the elements of the MTS that place stress on the environment. The first research contribution is a System Dynamics simulation model that examines the MTS resiliency after an extreme event and determines the sequence needed to restore the ocean-going port to …

Dissolution-Enlarged Fractures Imaging Using Electrical Resistivity Tomography (Ert), Elnaz Siami-Irdemoosa

Doctoral Dissertations

"In recent years the electrical imaging techniques have been largely applied to geotechnical and environmental investigations. These techniques have proven to be the best geophysical methods for site investigations in karst terrain, particularly when the overburden soil is clay-dominated. Karst is terrain with a special landscape and distinctive hydrological system developed by dissolution of rocks, particularly carbonate rocks such as limestone and dolomite, made by enlarging fractures into underground conduits that can enlarge into caverns, and in some cases collapse to form sinkholes.

Bedding planes, joints, and faults are the principal structural guides for underground flow and dissolution in almost …

Design And Performance Of Cost-Effective Ultra-High Performance Concrete For Prefabricated Elements, Weina Meng

Doctoral Dissertations

"This study presented in this thesis aims to: (1) develop a mixture design methodology for cost-effective ultra-high-performance concrete (UHPC) incorporating high volume of supplementary cementitious materials and conventional concrete and masonry sands; (2) developed UHPC with adapted rheology incorporating lightweight sand, hybrid fibers, and nanomaterials with improved properties; (3) design prefabricated UHPC panels with fiber-reinforced polymers (FRP) for enhanced flexural properties of stay-in-place panels made with optimized UHPC; and (4) explore potential applications of such UHPC elements. The proposed design methodology produced UHPC mixtures with 28-days compressive strengths higher than 125 and 168 MPa under standard water curing and 1-d …

High-Volume Recycled Materials For Sustainable Transportation Infrastructure, Seyedhamed Sadati

Doctoral Dissertations

"The objective of this study is to investigate the feasibility of using high performance concrete made with high-volume of recycled materials in transportation infrastructure. The main focus was to develop mixtures for rigid pavement construction. A variety of fine and coarse recycled concrete aggregates (RCA) were investigated. The feasibility of replacing 50% of Portland cement with industrial by-products and supplementary cementitious materials (SCMs) was also evaluated. Experimental program was conducted to quantify the effect of concrete mixture design and RCA characteristics on mechanical properties, drying shrinkage, cracking potential, and durability of concrete. The development of a database and analysis using …

Optimal Electric Vehicle Scheduling : A Co-Optimized System And Customer Perspective, Maigha

Doctoral Dissertations

"Electric vehicles provide a two pronged solution to the problems faced by the electricity and transportation sectors. They provide a green, highly efficient alternative to the internal combustion engine vehicles, thus reducing our dependence on fossil fuels. Secondly, they bear the potential of supporting the grid as energy storage devices while incentivizing the customers through their participation in energy markets. Despite these advantages, widespread adoption of electric vehicles faces socio-technical and economic bottleneck. This dissertation seeks to provide solutions that balance system and customer objectives under present technological capabilities. The research uses electric vehicles as controllable loads and resources. The …

Durability Behavior Of Fiber Reinforced Polymer And Steel Reinforced Polymer For Infrastructure Applications, Wei Wang

Doctoral Dissertations

"Crack development in reinforced concrete (RC) structures is common in elements such as bridge decks. However, these cracks can impose significant problems over time, because they allow chlorides from deicing chemicals to infiltrate concrete which will then corrode steel bars as RC structures are exposed to harsh weather. In the last decade, composite reinforcement systems are internally or externally applied to concrete structures instead of traditional steel reinforcing bars, or to strengthen concrete elements in flexure and shear. However, studies regarding the long-term durability performance of composite reinforcement systems is limited. Therefore, in order to popularize the application of these …

Understanding The Deformation Mechanisms In Nanostructured Metals By A Novel Discrete Crystal Plasticity Finite Element Model, Rui Yuan

Doctoral Dissertations

"Implementation of nanostructured metals and alloys for use in engineering applications requires a detailed knowledge of the underlying deformation mechanisms in these materials. It is well known that plastic deformation in metals and alloys is mainly mediated by dislocation activities. Nonetheless, TEM observations and atomistic simulations indicate that dislocation-mediated plasticity in nanostructured metals and alloys is significantly different from that in their coarse-grained counterparts. Therefore, this dissertation focuses on the exploration of the deformation mechanisms in nanostructured metals via crystal plasticity finite element modeling and simulation.

A statistical grain boundary dislocation source model accounting for dislocation nucleation and slip events …

Thermomechanical Fatigue Life Investigation Of An Ultra-Large Mining Dump Truck Tire, Wedam Nyaaba

Doctoral Dissertations

The cost benefits associated with the use of heavy mining machinery in the surface mining industry has led to a surge in the production of ultra-large radial tires with rim diameters in excess of 35 in. These tires experience fatigue failures in operation. The use of reinforcing fillers and processing aids in tire compounds results in the formation of microstructural inhomogeneity in the compounds and may serve as sources of crack initiation in the tire. Abrasive material cutting is another source of cracks in tires used in mining applications. It suffices, then, to assume that every material plane in the …

Gamma Spectroscopy By Artificial Neural Network Coupled With Mcnp, Huseyin Sahiner

Doctoral Dissertations

"While neutron activation analysis is widely used in many areas, sensitivity of the analysis depends on how the analysis is conducted. Even though the sensitivity of the techniques carries error, compared to chemical analysis, its range is in parts per million or sometimes billion. Due to this sensitivity, the use of neutron activation analysis becomes important when analyzing bio-samples. Artificial neural network is an attractive technique for complex systems. Although there are neural network applications on spectral analysis, training by simulated data to analyze experimental data has not been made. This study offers an improvement on spectral analysis and optimization …

Lhd Vibrations Analysis And Numerical Modeling During Operations, Kgosietsile Kolobe

Doctoral Dissertations

"Load-haul-dump vehicles (LHDs) are extensively used as primary loaders in mining operations. LHDs have proven to be vigorous, extremely productive and reliable in mining applications. They have a wide range of tramming capacities that have enabled them to become an essential component in the hard rock mining industry.

Increased mining economic challenges and global competition means the mining industry has to maximize productivity by cutting down operating and capital costs. Also, improvements in safety standards have led to the demand for safer and efficient machines.

LHD operators are at a high risk of whole-body vibrations (WBVs) exposure leading to musculoskeletal …

Advanced Control Architectures For Grid Connected And Standalone Converter Systems, Subhajyoti Mukherjee

Doctoral Dissertations

"This dissertation proposes new control algorithms dedicated towards improving the reliability, computational burden and stability in grid-connected and stand-alone based power electronic converter systems applicable for ac microgrids.

Two voltage sensorless control architectures, one for stand-alone applications and the other for grid-connected application are established in this thesis. The output voltage of a standalone single-phase inverter is controlled directly by controlling the output filter capacitor current without using a dedicated output voltage sensor. A method to estimate the output filter capacitance is also presented. For the grid connected converter, a novel closed loop estimation is presented to estimate the grid …

Atomic/Molecular Layer Deposition Prepared Size-Selective Catalysts And Supported Nickel Catalysts, Zeyu Shang

Doctoral Dissertations

"Heterogeneous catalysts are widely used because of their many advantages. In this dissertation, the application of atomic/molecular layer deposition (ALD/MLD) in heterogeneous catalyst synthesis and modification was examined.

A novel nanostructured size-selective catalyst was synthesized by depositing ultra-thin porous shells on the surface of catalysts. The ultra-thin porous shells were formed by oxidation of aluminum alkoxide films deposited by MLD. The catalytic activity of the size-selective catalyst was improved by introducing gaps between the porous shell and catalytic metal nanoparticles. The introduction of gaps greatly reduced the catalyst activity loss, which resulted from the contact areas between the active sites …

Design And Performance Of Cost-Effective Ultra High Performance Concrete For Bridge Deck Overlays, Mahdi Valipour

Doctoral Dissertations

"The main objective of this research is to develop a cost-effective ultra-high performance concrete (UHPC) for bonded bridge deck overlays. The high durability and mechanical properties of such repair material can offer shorter traffic closures and prolong the service life of the pavement. The UHPC was optimized using supplementary cementitious materials (SCMs), proper combinations of sands, and adequate selection of fiber types and contents. Packing density studies included paste, sand, and fiber combinations. The robustness of optimized UHPC mixtures to variations of mixing and curing temperatures was examined. The efficiency of various shrinkage mitigation approaches in reducing autogenous and drying …

Impact Of Vertical Internals On The Hydrodynamics And Heat Transfer Coefficient In A Gas-Solid Fluidized Bed, Haidar Moafaq Taofeeq

Doctoral Dissertations

"This research studied the impact of the dense vertical immersed heat exchanging tubes on the gas and solids hydrodynamic characteristics, flow regime, pressure drop, and heat transfer in a 0.14 m inside diameter gas-solid fluidized bed column of. Two sizes of vertical internal tube bundles (0.0127 and 0.0254 m) of circular arrangement have been implemented to represent the heat exchange tubes covering 25% of the column cross-sectional area. The experimental work was achieved at different operating conditions and various solids particle types that differ in average particle size, solids density, particles shape, and particles sphericity. The experimental measurements were performed …

Mass Transfer Studies In Heavy Oil Recovery Using Solvents, Vijitha Mohan

Doctoral Dissertations

"Heavy oil, sometimes called bitumen, is known for its high viscosity (above 100 cp) and low API gravity (below 22⁰). In most cases, viscosity reduction is needed for the final product. There is a considerable amount of heavy oil in Alberta, Canada and the world's largest heavy oil deposit is in Venezuela. Yet less than 1% of it can be recovered because of its high viscosity. For shallow reservoirs, it is possible to resort to open cast mining. For deeper reservoirs, steam is used at ~ 350 ⁰C which gets the oil viscosity reduced to 1cp, which can now be …

Modeling Dynamic Community Acceptance Of Mining Using Agent-Based Modeling, Mark Kofi Boateng

Doctoral Dissertations

"This research attempts to provide fundamental understanding into the relationship between perceived sustainability of mineral projects and community acceptance. The main objective is to apply agent-based modeling (ABM) and discrete choice modeling to understand changes in community acceptance over time due to changes in community demographics and perceptions. This objective focuses on: 1) formulating agent utility functions for ABM, based on discrete choice theory; 2) applying ABM to account for the effect of information diffusion on community acceptance; and 3) explaining the relationship between initial conditions, topology, and rate of interactions, on one hand, and community acceptance on the other …

Geophysical Assessment Of Soil And Rock In The New Madrid Seismic Zone, Faraj Mohamed Eljabri

Doctoral Dissertations

"The research presented here consists of two case studies: the first from a study site in Illinois and the second from a site in Arkansas. In both instances, geophysical investigations were conducted to characterize the subsurface. At the Illinois site, borehole control, downhole seismic (DHS), seismic refraction tomography (SRT) and multichannel analysis of surface waves (MASW) data were acquired for the purpose of seismic site characterization. Shear wave and compressional wave velocities were used to estimate depth to bedrock and to generate 1-D plots depicting variations in Poisson's Ratio, elastic moduli and density. The average shear wave velocity in the …

Long-Period Fiber Grating Corrosion Sensors For Life-Cycle Monitoring And Assessment Of Reinforced Concrete Structures, Yizheng Chen

Doctoral Dissertations

"This study aims to: (1) explore, develop, calibrate and validate Fe-C coated, long period fiber grating (LPFG) sensors for short-term mass loss measurement of the Fe-C coating; (2) develop, calibrate, and validate steel tube-encapsulated, fiber optic probes and LPFG sensors for long-term mass loss detection of the steel tube; (3) correlate the corrosion process of packaging metal materials with that of steel bars in direct contact with the packaged probe or sensor except for a thin insulation tape; and (4) apply both types of corrosion sensors into reinforced concrete (RC) structures for reinforcing bar corrosion monitoring and structural condition assessment. …

Investigation Of Hydraulic Fracture Complexity And The Benefits Of Maximizing Or Minimizing Complexity In Unconventional Resources, Rashid Sheikh Kassim

Doctoral Dissertations

"This dissertation discusses two separate, yet inter-related studies. The first study was an extension of historical work comparing transversely fractured versus longitudinally fractured horizontal wells in multiphase flow environment. The second study investigated hydraulic fracture complexities and the benefits of maximizing or minimizing complexities in unconventional resources and tight reservoirs.

The main objective of this research was to investigate fracture complexity and its impact on well performance and economics. To achieve that objective, three different integrated completions and reservoir models were built. Two of the three models, a hybrid reservoir model and micro-seismic based SRV (stimulated reservoir volume) model, were …