Engineering Commons^™

Bioaerosol Size As A Potential Determinant Of Airborne E. Coli Viability Under Ultraviolet Germicidal Irradiation And Ozone Disinfection, Weixing Hao, Yue-Wern Huang, Yang Wang

Biological Sciences Faculty Research & Creative Works

Ultraviolet germicidal irradiation (UVGI) and ozone disinfection are crucial methods for mitigating the airborne transmission of pathogenic microorganisms in high-risk settings, particularly with the emergence of respiratory viral pathogens such as SARS-CoV-2 and avian influenza viruses. This study quantitatively investigates the influence of UVGI and ozone on the viability of E. coli in bioaerosols, with a particular focus on how E. coli viability depends on the size of the bioaerosols, a critical factor that determines deposition patterns within the human respiratory system and the evolution of bioaerosols in indoor environments. This study used a controlled small-scale laboratory chamber where E. …

A Review Of Dielectric Barrier Discharge Cold Atmospheric Plasma For Surface Sterilization And Decontamination, Kolawole Adesina, Ta Chun Lin, Yue-Wern Huang, Marek Locmelis, Daoru Frank Han

Biological Sciences Faculty Research & Creative Works

Numerous investigations have shown that non-equilibrium discharges at atmospheric pressure, also known as "cold atmospheric plasma" (CAP) are efficient to remove biological contaminants from surfaces of a variety of materials. Recently, CAP has quickly advanced as a technique for microbial cleaning, wound healing, and cancer therapy due to the chemical and biologically active radicals it produces, known collectively as reactive oxygen and nitrogen species (RONS). This article reviews studies pertaining to one of the atmospheric plasma sources known as Dielectric Barrier Discharge (DBD) which has been widely used to treat materials with microbes for sterilization, disinfection, and decontamination purposes. To …

Study Of Legionella Pneumophila Treatment With Copper In Drinking Water By Single Cell-Icp-Ms, Lei Xu, Austin Sigler, Anna Chernatynskaya, Lindsey Rasmussen, Jingrang Lu, Endalkachew Sahle-Demessie, David J. Westenberg, Hu Yang, Honglan Shi

Biological Sciences Faculty Research & Creative Works

Legionella pneumophila is a persistent opportunistic pathogen that poses a significant threat to domestic water systems. Previous studies suggest that copper (Cu) is an effective antimicrobial in water systems. A rapid and sensitive quantification method is desired to optimize the conditions of L. pneumophila treatment by Cu and to better understand the interaction mechanisms between Cu and cells. In this study, we developed a highly sensitive single cell (SC)-ICP-MS method to monitor L. pneumophila cell concentration and track their uptake of Cu. The SC-ICP-MS method showed excellent sensitivity (with a cell concentration detection limit of 1000 cells/mL), accuracy (good agreement …

3d-Printed Hydrogels Dressings With Bioactive Borate Glass For Continuous Hydration And Treatment Of Second-Degree Burns, Fateme Fayyazbakhsh, Michael J. Khayat, Candy Sadler, Delbert Day, Yue-Wern Huang, Ming-Chuan Leu

Biological Sciences Faculty Research & Creative Works

Recent advances in additive manufacturing have led to the development of innovative solutions for tissue regeneration. Hydrogel materials have gained significant attention for burn wound treatment in clinical practice among various advanced dressings due to their soothing and moisturizing activity. However, prolonged healing, pain, and traumatic removal due to the lack of long-term wound hydration are some of the challenges in the treatment of second-degree burn wounds. In this study, 3D-printed dressings were fabricated using gelatin, alginate, and bioactive borate glass (BBG) using an extrusion-based bioprinter. After ionic crosslinking, the 3D-printed dressings were characterized for mechanical properties, degradation rate, hydration …

Blood Biomarkers For Mild Traumatic Brain Injury: A Selective Review Of Unresolved Issues, Daniel B. Hier, Tayo Obafemi-Ajayi, Matthew S. Thimgan, Gayla R. Olbricht, Sima Azizi, Blaine Allen, Bassam A. Hadi, Donald C. Wunsch

Biological Sciences Faculty Research & Creative Works

Background: The use of blood biomarkers after mild traumatic brain injury (mTBI) has been widely studied. We have identified eight unresolved issues related to the use of five commonly investigated blood biomarkers: neurofilament light chain, ubiquitin carboxy-terminal hydrolase-L1, tau, S100B, and glial acidic fibrillary protein. We conducted a focused literature review of unresolved issues in three areas: mode of entry into and exit from the blood, kinetics of blood biomarkers in the blood, and predictive capacity of the blood biomarkers after mTBI.

Findings: Although a disruption of the blood brain barrier has been demonstrated in mild and severe traumatic brain …

Polyrad -- Protection Against Free Radical Damage, Hannah Kim, Yin Tse, Andrew Webb, Ethan Mudd, Muhammad Raisul Abedin, Melanie R. Mormile, Subhadeep Dutta, Kaushal Rege, Sutapa Barua

Biological Sciences Faculty Research & Creative Works

The effects of elevated levels of radiation contribute to the instability of pharmaceutical formulations in space compared to those on earth. Existing technologies are ineffective at maintaining the therapeutic efficacies of drugs in space. Thus, there is an urgent need to develop novel space-hardy formulations for preserving the stability and efficacy of drug formulations. This work aims to develop a novel approach for the protection of space pharmaceutical drug molecules from the radiation-induced damage to help extend or at least preserve their structural integrity and potency. To achieve this, free radical scavenging antioxidant, Trolox was conjugated on the surface of …

3d-Printed Biomimetic Bioactive Glass Scaffolds For Bone Regeneration In Rat Calvarial Defects, Krishna C. R. Kolan, Yue-Wern Huang, Julie A. Semon, Ming-Chuan Leu

Biological Sciences Faculty Research & Creative Works

The pore geometry of scaffold intended for the use in the bone repair or replacement is one of the most important parameters in bone tissue engineering. It affects not only the mechanical properties of the scaffold but also the amount of bone regeneration after implantation. Scaffolds with five different architectures (cubic, spherical, x, gyroid, and diamond) at different porosities were fabricated with bioactive borate glass using the selective laser sintering (SLS) process. The compressive strength of scaffolds with porosities ranging from 60% to 30% varied from 1.7 to 15.5 MPa. The scaffold's compressive strength decreased significantly (up to 90%) after …

Bioprinting With Human Stem Cell-Laden Alginate-Gelatin Bioink And Bioactive Glass For Tissue Engineering, Krishna C. R. Kolan, Julie A. Semon, Bradley Bromet, D. E. Day, Ming-Chuan Leu

Biological Sciences Faculty Research & Creative Works

Three-dimensional (3D) bioprinting technologies have shown great potential in the fabrication of 3D models for different human tissues. Stem cells are an attractive cell source in tissue engineering as they can be directed by material and environmental cues to differentiate into multiple cell types for tissue repair and regeneration. In this study, we investigate the viability of human adipose-derived mesenchymal stem cells (ASCs) in alginate-gelatin (Alg-Gel) hydrogel bioprinted with or without bioactive glass. Highly angiogenic borate bioactive glass (13-93B3) in 50 wt% is added to polycaprolactone (PCL) to fabricate scaffolds using a solvent-based extrusion 3D bioprinting technique. The fabricated scaffolds …

Near-Field Electrospinning Of A Polymer/Bioactive Glass Composite To Fabricate 3d Biomimetic Structures, Krishna C. R. Kolan, Jie Li, Sonya Roberts, Julie A. Semon, Jonghyun Park, D. E. Day, Ming-Chuan Leu

Biological Sciences Faculty Research & Creative Works

Bioactive glasses have recently gained attention in tissue engineering and three-dimensional (3D) bioprinting because of their ability to enhance angiogenesis. Some challenges for developing biological tissues with bioactive glasses include incorporation of glass particles and achieving a 3D architecture mimicking natural tissues. In this study, we investigate the fabrication of scaffolds with a polymer/bioactive glass composite using near-field electrospinning (NFES). An overall controlled 3D scaffold with pores, containing random fibers, is created and aimed to provide superior cell proliferation. Highly angiogenic borate bioactive glass (13-93B3) in 20 wt.% is added to polycaprolactone (PCL) to fabricate scaffolds using the NFES technique. …

Solvent Based 3d Printing Of Biopolymer/Bioactive Glass Composite And Hydrogel For Tissue Engineering Applications, Krishna Kolan, Yong Liu, Jakeb Baldridge, Caroline Murphy, Julie A. Semon, D. E. Day, Ming-Chuan Leu

Biological Sciences Faculty Research & Creative Works

Three-dimensional (3D) bioprinting is an emerging technology in which scaffolding materials and cell-laden hydrogels may be deposited in a pre-determined fashion to create 3D porous constructs. A major challenge in 3D bioprinting is the slow degradation of melt deposited biopolymer. In this paper, we describe a new method for printing poly-caprolactone (PCL)/bioactive borate glass composite as a scaffolding material and Pluronic F127 hydrogel as a cell suspension medium. Bioactive borate glass was added to a mixture of PCL and organic solvent to make an extrudable paste using one syringe while hydrogel was extruded and deposited in between the PCL/borate glass …

3d Bioprinting Of Stem Cells And Polymer/Bioactive Glass Composite Scaffolds For Bone Tissue Engineering, Caroline Murphy, Krishna Kolan, Wenbin Li, Julie A. Semon, D. E. Day, Ming-Chuan Leu

Biological Sciences Faculty Research & Creative Works

A major limitation of using synthetic scaffolds in tissue engineering applications is insufficient angiogenesis in scaffold interior. Bioactive borate glasses have been shown to promote angiogenesis. There is a need to investigate the biofabrication of polymer composites by incorporating borate glass to increase the angiogenic capacity of the fabri-cated scaffolds. In this study, we investigated the bioprinting of human adipose stem cells (ASCs) with a polycaprolac-tone (PCL)/bioactive borate glass composite. Borate glass at the concentration of 10 to 50 weight %, was added to a mixture of PCL and organic solvent to make an extrudable paste. ASCs suspended in Matrigel …

Conversion Of Glycerol To 1,3-Propanediol Under Haloalkaline Conditions, Melanie R. Mormile, Daniel William Roush, Dwayne A. Elias, Oliver C. Sitton

Biological Sciences Faculty Research & Creative Works

A method of producing 1,3-propanediol. The method comprises fermenting a haloalkaliphilic species of Halanaerobium with a source of glycerol into 1,3-propanediol, at a pH of greater than about 10 and at a salt concentration of greater than about 5% w/v. Furthermore, with supplementation of vitamin B₁₂, the yield of 1,3-propanediol to glycerol can be increased.

The Use Of A Fractional Factorial Design To Determine The Factors That Impact 1,3-Propanediol Production From Glycerol By Halanaerobium Hydrogeniformans, Shivani Kalia, Jordan Trager, Oliver C. Sitton, Melanie R. Mormile

Biological Sciences Faculty Research & Creative Works

In recent years, biodiesel, a substitute for fossil fuels, has led to the excessive production of crude glycerol. The resulting crude glycerol can possess a high concentration of salts and an alkaline pH. Moreover, current crude glycerol purification methods are expensive, rendering this former commodity a waste product. However, Halanaerobium hydrogeniformans, a haloalkaliphilic bacterium, possesses the metabolic capability to convert glycerol into 1,3-propanediol, a valuable commodity compound, without the need for salt dilution or adjusting pH when grown on this waste. Experiments were performed with different combinations of 24 medium components to determine their impact on the production of …

Biosignatures In Mars Analog Acid Salt Lakes, Sarah Stewart Johnson, M. L. Soni, D. J. Collins, Kathleen C. Benison, Melanie R. Mormile, M. G. Chevrette, B. L. Ehlmann

Biological Sciences Faculty Research & Creative Works

Paleolake sites on Mars, particularly buried deposits that have been shielded from surface radiation, serve as intriguing targets for the search for life. Mars-like ephemeral playa lakes here on Earth can offer insights and perspectives on the possibilities for physical, metabolic, and biomolecular biosignature recovery from similar environments on Mars.

Early Acidification Of Mars And The Potential Implications For Biology, Sarah Stewart Johnson, D. Goerlitz, Kathleen C. Benison, Melanie R. Mormile, D. W. Ming

Biological Sciences Faculty Research & Creative Works

A leading paleoclimate theory for Mars, based on the identification of phyllosilicate minerals in ancient terrains, posits that the first several million years of the planet’s history were dominated by neutral to alkaline pH. However, evidence is mounting for the consideration of an alternate hypothesis: that some smectites on Mars formed under acidic conditions, and that the early surface of Mars may not have been subject to circum-neutral pH conditions, at least not uniformly. Work on shergottitic liquids suggests that up to 2400 ppm of sulfur could have degassed from martian magma, supplying more than enough sulfur for the planet’s …

Angiogenic Effect Of Bioactive Borate Glass Microfibers And Beads In The Hairless Mouse, Richard J. Watters, Roger F. Brown, D. E. Day

Biological Sciences Faculty Research & Creative Works

The purpose of this project was to investigate the angiogenic mechanism of bioactive borate glass for soft tissue repair in a 'hairless' SKH1 mouse model. Subcutaneous microvascular responses to bioactive glass microfibers (45S5, 13-93B3, and 13-93B3Cu) and bioactive glass beads (13-93, 13-93B3, and 13-93B3Cu) were assessed via: noninvasive imaging of skin microvasculature; histomorphometry of microvascular densities; and quantitative PCR measurements of mRNA expression of VEGF and FGF-2 cytokines. Live imaging via dorsal skin windows showed the formation at two weeks of a halo-like structure infused with microvessels surrounding implanted borate-based 13-93B3 and 13-93B3Cu glass beads, a response not observed with …

Going From Microbial Ecology To Genome Data And Back: Studies On A Haloalkaliphilic Bacterium Isolated From Soap Lake, Washington State, Melanie R. Mormile

Biological Sciences Faculty Research & Creative Works

Soap Lake is a meromictic, alkaline (∼pH 9.8) and saline (∼14-140 g liter^-1) lake located in the semiarid area of eastern Washington State. Of note is the length of time it has been meromictic (at least 2000 years) and the extremely high sulfide level (∼140 mM) in its monimolimnion. As expected, the microbial ecology of this lake is greatly influenced by these conditions. A bacterium, Halanaerobium hydrogeniformans, was isolated from the mixolimnion region of this lake. Halanaerobium hydrogeniformans is a haloalkaliphilic bacterium capable of forming hydrogen from 5- and 6-carbon sugars derived from hemicellulose and cellulose. Due …

A Streamlined Strategy For Biohydrogen Production With Halanaerobium Hydrogeniformans, An Alkaliphilic Bacterium, Matthew B. Begemann, Melanie R. Mormile, Oliver C. Sitton, Judy D. Wall, Dwayne A. Elias

Biological Sciences Faculty Research & Creative Works

Biofuels are anticipated to enable a shift from fossil fuels for renewable transportation and manufacturing fuels, with biohydrogen considered attractive since it could offer the largest reduction of global carbon budgets. Currently, lignocellulosic biohydrogen production remains inefficient with pretreatments that are heavily fossil fuel-dependent. However, bacteria using alkali-treated biomass could streamline biofuel production while reducing costs and fossil fuel needs. An alkaliphilic bacterium, Halanaerobium hydrogeniformans, is described that is capable of biohydrogen production at levels rivaling neutrophilic strains, but at pH 11 and hypersaline conditions. H. hydrogeniformans ferments a variety of 5-and 6-carbon sugars derived from hemicellulose and cellulose …

A General Recurrent Neural Network Approach To Model Genetic Regulatory Networks, Xiao Hu, Anne M. Maglia, Donald C. Wunsch

Biological Sciences Faculty Research & Creative Works

There is an urgent need for tools to unravel the complex interactions and functionalities of genes. As such, there has been much interest in reverse-engineering genetic regulatory networks from time series gene expression data. We use an artificial neural network to model the dynamics of complicated gene networks and to learn their parameters. The positive and negative regulations of genes are defined by a weight matrix, and different genes are allowed to have different decaying time constants. We demonstrate the effectiveness of the method by recreating the SOS DNA Repair network of Escherichia coli bacterium, previously discovered through experimental data.

The Distribution Of Chlorine And Iodine In Soil In The Vicinity Of Lead Mining And Smelting Operations, Bixby Area, S.E. Missouri, U.S.A., R. Fuge, M. J. Andrews, T. E. Clevenger, B. E. Davies, Nord L. Gale, C. F. Paveley, B. (Bobby) G. Wixson

Biological Sciences Faculty Research & Creative Works

Iodine and Cl are enriched in soils in the vicinity of the Magmont and Buick lead mines near Bixby, southeastern Missouri. The enrichments, up to 5.6 ppm I and 305 ppm Cl, are against regional background of 1.26 ppm I and 41 ppm Cl. The area of highest I and Cl is thought to reflect a zone of base metal sulphide mineralization occurring about 400 m below the surface. Iodine and Cl are also enriched in soils immediately adjacent to a tailings pond, hence these elements would appear to be leached from this source. A zone of enhanced I values …

Differentiation Of Murine Erythroleukemic Cells During Exposure To Microwave Radiation, Roger F. Brown, S. V. Marshall

Biological Sciences Faculty Research & Creative Works

Cultures of murine erythroleukemic cells undergoing erythroid differentiation in response to induction by hexamethylene bisacetamide (HMBA) were exposed to 1180-MHz microwave (MW) radiation for 48 h while maintained at 37.4°C by variable-temperature air flow. Exposures at 1180 MHz were at 5.5, 11, and 22 mW/cm2 with a normalized specific absorption rate of 3.32 W/kg per mW/cm2. HMBA-induced control cells were incubated in a 37.4°C water bath. Mean cell doubling time was 16.5 h in both the irradiated cultures and the control cultures. About 65% of the cells of irradiated cultures and control cultures were benzidine-positive differentiated cells. Both the irradiated …

Cadmium In Forest Ecosystems Around Lead Smelters In Missouri, Nord L. Gale, Bobby G. Wixson

Biological Sciences Faculty Research & Creative Works

The development of Missouri's new lead belt within the past decade has provided an excellent opportunity to study the dissemination and effects of heavy metals in a deciduous forest ecosystem. Primary lead smelters, within the new lead belt have been identified as potential sources of cadmium as well as lead, zinc, and copper. Sintering and blast furnace operations tend to produce significant quantities of small particulates highly enriched in cadmium and other heavy metals. At one smelter, samples of stack particulate emissions indicate that as much as 0.21 lb of cadmium may be released to the atmosphere per hour. This …