Engineering Commons^™

Flight Dynamics: Flying Qualities Of Handling Factors Are Engineered Into The Aircraft Design, Nihad E. Daidzic

Aviation Department Publications

Flight dynamics is an aerospace engineering discupline that addresses aircraft stability and controllability. It is also mathematically very intensive and is traditionally the most difficult in the pilot training curriculum. Ultimately, it does not matter how good steady-state performance of an aircraft design is if its flying (handling) qualities are deficient. Paradoxically, the first airplane Wright Flyer, was statically and dynamically unstable, had large control authority, and was difficult to fly. We've come a long way since those early days, but stability is still vitally important in aircraft design and flight ops. The focus of this article will be airplane …

How Aircraft Stability Affects Handling Characteristics And Piloting Techniques, Nihad E. Daidzic

Aviation Department Publications

FAA Safety Seminar (GL1578763) held at Minnesota State University, Mankato, Wiecking Center Auditorium at 18:00 CST on Thursday, November 16, 2017.

Porter Henderson Library Display: Aviation History Month, Angelo State University

Aeronautics

Bibliography and photograph of a display of government documents from Angelo State University, Porter Henderson Library, San Angelo, Texas.

Expanding Aeronautical Experience: Obtaining Additional Aircraft Categories, Classes, And Type Certificates And Ratings, Nihad E. Daidzic

Aviation Department Publications

FAA Safety Seminar (GL1578761F) held at Minnesota State University, Mankato Wiecking Center Auditorium at 18:00 CST on Thursday, October, 12, 2017.

Design And Validation Of A Low Cost High Speed Atomic Force Microscope, Michael Ganzer, Tien Pham

Journal of Undergraduate Research at Minnesota State University, Mankato

The Atomic Force Microscope (AFM) is an important instrument in nanoscale topography, but it is expensive and slow. The authors designed an AFM to overcome both limitations. To do this, they used an Optical Pickup Unit (OPU) from a DVD player as the laser and photodetector system to minimize cost and they did not implement a vertical control loop, which maximized potential speed. Students will be able to be use this device to make nanoscale measurements and engage in micro-engineering. To prototype this idea, the authors tested an OPU with a silicon wafer and demonstrated the ability to consistently distinguish …

Improving Speech Recognition For Interviews With Both Clean And Telephone Speech, Sung Woo Choi

Journal of Undergraduate Research at Minnesota State University, Mankato

High quality automatic speech recognition (ASR) depends on the context of the speech. Cleanly recorded speech has better results than speech recorded over telephone lines. In telephone speech, the signal is band-pass filtered which limits frequencies available for computation. Consequently, the transmitted speech signal may be distorted by noise, causing higher word error rates (WER). The main goal of this research project is to examine approaches to improve recognition of telephone speech while maintaining or improving results for clean speech in mixed telephone-clean speech recordings, by reducing mismatches between the test data and the available models. The test data includes …

Shear Driven Micro-Fluidic Pump For Cardiovascular Applications, Nihad E. Daidzic

Aviation Department Publications

A valveless shear-driven micro-fluidic pump design (SDMFP) for hemodynamic applications is presented in this work. One of the possible medical and biomedical applications is in-vivo hemodynamic (human blood circulation) support/assist. One or more SDMFPs can be inserted/implanted into vascular lumens in a form of a stent/duct in series and/or in parallel (bypass duct) to support blood circulation in-vivo. A comprehensive review of various micro-pump designs up to about mid 2000’s is given in [1,2]. Many of micropump designs considered are not suitable for in-vivo or even in-vitro medical/biomedical applications.

Operating principles, design, and SDMFP features are given in [3]. A …

Powered-Lift Aircraft Category: What Is It?, Nihad E. Daidzic

Aviation Department Publications

FAA Safety Seminar (GL1574995) held at Minnesota State University, Mankato at 18:00 CST on Thursday, April 6, 2017.

Method And Shear-Driven Micro-Fluidic Pump, Nihad E. Daidzic

Aviation Department Publications

United States Patent Application, Publication Number US 2017/0096990 A1, Publication Date April 6, 2017.

An example includes an apparatus to pump a fluid. The apparatus includes a housing extending along a length defining an elongate interior, an actuator in the housing, conforming to the elongate interior, the actuator including a plurality of lumens, each having a length extending substantially parallel to the elongate interior, each from around 10 to 200 micrometers across and an actuator configured to oscillate the actuator in the actuator housing along the length of the elongate interior with a rate differential between movement in a first …

Find Your Center, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Substrate Integrated E-Plane Horn Antenna And Antenna Array, Zhewei Gu

All Graduate Theses, Dissertations, and Other Capstone Projects

In this paper, a novel SMA fed substrate integrated E-plane horn antenna and antenna array are proposed. The substrate integrated E-plane waveguide (SIEW) is not only able to integrate conventional waveguide circuits on printed circuit boards (PCB), but also especially falls into all E-plane circuits which substrate integrated waveguide (SIW) technique fails to. Essential copper strips are sandwiched in the middle by two PCBs to support longitudinal current in the E-plane fed through an SIEW-to-SMA transition. Copper plated holes aligned along the wave propagation direction are drilled through the substrate and copper strips, so that vertical current in the H-plane …

Optimized Endpoint Delivery Via Unmanned Aerial Vehicles, Fuad Gazal

All Graduate Theses, Dissertations, and Other Capstone Projects

Unmanned Aerial Vehicles (UAVs) are remotely piloted aircraft with a range of varying applications. Though early adoption of UAVs focused on military applications, surveillance, photography, and agricultural applications are presently on the rise. This work aims to ascertain how UAVs may be employed to elicit deceased transportation times, increased power efficiency, and improved safety. Resulting in optimized end point delivery. A combination of tools and techniques, involving a mathematical model, UAV simulations, redundant control systems, and custom designed electrical and mechanical components were used towards reaching the goal of a 10-kilogram maximum payload delivered 10 miles under 30 minutes. Two …

The Effects Of Fiber Orientation And Volume Fraction Of Fiber On Mechanical Properties Of Additively Manufactured Composite Material, Suresh Chandra Kuchipudi

All Graduate Theses, Dissertations, and Other Capstone Projects

Additive manufacturing (AM) also known as 3D printing has tremendous advancements in recent days with a vast number of applications in industrial, automotive, architecture, consumer projects, fashion, toys, food, art, etc. Composite materials are widely used in structures with weight as a critical factor especially in aerospace industry. Recently, additive manufacturing technology, a rapidly growing innovative technology, has gained lot of importance in making composite materials. The properties of composite materials depend upon the properties of constituent’s matrix and fiber. There is lot of research on effect of fiber orientation on mechanical properties of composite materials made using conventional manufacturing …

Process Parameter Optimization With Numerical Modelling And Experimentation Design Of Binder Jet Additive Manufacturing, Sairam Vangapally

All Graduate Theses, Dissertations, and Other Capstone Projects

Binder jetting technology is an additive manufacturing technology in which powder materials are binded together layer by layer forming the product from input CAD model. The process involves printing the product layer by layer, curing and sintering. The mechanical properties of 3D printed samples varies based on process parameters, hence there is a need to tune the process parameters for optimal characteristics. Three main parameters namely layer thickness, sintering time and sintering temperature were identified and the study focuses on the effect of parameters on dimensional accuracy and compressive strength of the samples. Full factorial experimental approach was used to …

Graphical User Interface (Gui) Development For An Optical Communication Simulator, Sratsav Ram Shrestha

All Graduate Theses, Dissertations, and Other Capstone Projects

Modeling and simulation tools have been an integral part of engineering world for a long time. Various Electronic Design Automation (EDA) tools have been extensively used in various industries and research to evaluate the performance of electronic systems. The advancement of such design tools also has influenced the optical communication sector such that there has been a continuous progress on the Photonic Design Automation (PDA) tools. Currently, many software for simulating optical communications are available. However, they are very expensive and conceal the information on how components are modeled. To avoid these constraints, we developed our own PDA software for …

Size Effect Of Clay Filler Particles On Mechanical Properties Of Pultruded Polymer Composites Under Shear Loading, Jaysimha Reddy Sonti Reddy

All Graduate Theses, Dissertations, and Other Capstone Projects

Polymer composites are finding a range of applications across different fields of engineering. Hence, there is a need to understand the properties of these polymer composites. Mechanical testing can be done to determine the properties but firstly the composite must be manufactured consuming time and money. However, if the properties gained differ from those expected from composite the obtained data is rejected, and a new composite must be manufactured consuming more time and effort.

The micromechanical models play an important role in estimating the properties of the polymer composites. These models estimate the properties of the composite by estimating the …

Enhanced Handheld Engine Ethanol Study, Charindu Kariyawasan Jalath Thanthree

All Graduate Theses, Dissertations, and Other Capstone Projects

This study examined consumer and professional grade handheld engines. Twenty-four consumer grade 50 hour Emissions Determination Period (EDP) trimmers and 24 professional grade 300 hour EDP backpack leaf blowers were run on four different ethanol fuel concentrations; E0, E10, E15, and E20. Six engines of each type were run on each of the fuel blends through their full EDP.

All engines were broken-in and adjusted to manufacturer specifications on E0. Then engines were emissions tested on E0 to provide a baseline and to determine the rich to lean order of the engines. Next, the leanest operating engine received E20 and …

Vtol Hybrids: Tiltrotors Are Gaining Acceptance, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Study Of Stability And Thermal Conductivity Of Nanoparticles In Propylene Glycol, Sumit Mahajan

All Graduate Theses, Dissertations, and Other Capstone Projects

This thesis studied the effects of gravity induced settling, thermophoresis and Brownian motion on the thermal conductivity of the Aluminum Oxide (Al2O3) nanofluids. The base fluid was propylene glycol. The effects were studied by making three samples with volumetric percentages of 0.2 %, 2% and 3% Al2O3 in propylene glycol. Sets of 22 experiments were conducted over time to understand the behavior of settling. All samples were manually mixed each time the experiment was conducted. A Thermtest Transient Plane Source TPS 500S was used to measure the thermal conductivity. Volumetric percentages and diameters of nanoparticle were chosen so that the …

The Impact Of Active Aerodynamics On Motorcycles Using Computational Fluid Dynamics Simulations, Aditya Sripathi

All Graduate Theses, Dissertations, and Other Capstone Projects

Motorcycles are mostly utilized by commuters whose requirements are cheap and affordable transportation from point A to point B. Motorcycles also provide means to tour various places and have a leisure time for the majority of motorcyclists. Unfortunately, with pros also come cons such as accidents which are disabling or life-taking. According to motorcycle crash statistics produced every year, the majority of motorcycle crashes are caused due to facing unexpected obstacles in the path causing collisions due to insufficient braking time. Thus, this thesis serves as a mean to overcome this issue and provide a technological solution to the world …

Lean Implementation Through Process Automation, Olusola Onadipe Jr.

All Graduate Theses, Dissertations, and Other Capstone Projects

As lean manufacturing is increasingly becoming a common practice today in an effort to keep companies competitive, new and innovative processes are becoming the norm. Part of that innovation includes the development of automated machinery that can help alleviate some struggles with lead times and reduce overall labor. It is all in keeping with the trend of building products cheaper and faster to gain that edge. Company X has been focusing their efforts on lean manufacturing for years now. This paper covers an important project that involves the implementation of a complex mechanical system in an effort to build products …

Thermal Analysis Of 3d Printed 420 Stainless Steel, Adithya Pothuri

All Graduate Theses, Dissertations, and Other Capstone Projects

Additive manufacturing opens new possibilities in the manufacturing industry. 3D printing is a form of additive manufacturing. 3D printers will have a significant influence over the industrial market, with extremely positive effects in no time. The main aim of this research is to determine the effect of process parameters of Binder Jet manufactured 420 Stainless Steel (420SS) parts on thermal properties such as thermal conductivity. Different parameters, such as layer thickness, sintering time and sintering temperature were varied. A full factorial design of experiment matrix was made by varying these parameters using two levels. Testing showed that different parameters affected …