Engineering Commons^™

Nanoenhanced Additive Manufacturing: Additive Introduction Onto Halloysite Nanotubes And Into 3d Printing Filament For Tailored Material Characteristics, James Connor Nicholson

Doctoral Dissertations

With the rapid advancement of additive manufacturing technologies in recent years on both the microscale and the macroscale, research must be done to test the limits of currently available technologies. On the microscale, halloysite nanotubes have proven to be a viable platform for reinforcement of polymers and time release of loaded chemicals, as well as a substrate material for the deposition of nanoparticles. The range of materials are limited due to polarity conflicts, and often lead to wet chemical processes that use more toxic alternatives. Three-dimensional (3D) printing and macroscale additive manufacturing techniques can be used to generate custom structures, …

Diamond Mems Biosensors: Development And Applications, Wenli Zhang

Doctoral Dissertations

This research focuses on the development a dielectrophoresis-enhanced microfluidic impedance biosensor (DEP-e-MIB) to enable fast response, real-time, label-free, and highly sensitive sensor for bacterial detection in clinical sample. The proposed design consists of application of dielectrophoresis (DEP) across a microfluidic channel to one of the impedance spectroscopy electrodes in order to improve the existent bacterial detection limits with impedance spectroscopy. In order to realize such a design, choice of electrode material with a wide electrochemical potential window for water is very important. Conventional electrode material, such as gold, are typically insulated for the application of DEP, and they fail when …

A Non-Invasive Fluorescence-Based Oxygen Sensor And Platform For Studying Cell Responses To Metabolic Agents In Real-Time, Koutilya Reddy Buchapudi

Doctoral Dissertations

A fluorescence-based sensor in a transverse flow/stop measurement platform has been developed to determine real-time changes in oxygen consumption rates for cell metabolic studies. The oxygen sensitive fluorophore platinum octaethylporphyrin was embedded in a cellulose acetate matrix and affixed to a fiber optic bundle, which provided for transmission of the excitation and emission wavelengths of the film. The fiber optic bundle was sealed in a sensor head that can be used in standard 24-well plates common to research labs. The utility of the sensor and sensing platform were determined by measuring the changes in oxygen consumption rates of Candida albicans …

Nanoformulation For Anticancer Drug Delivery: Enhanced Pharmacokinetics And Circulation, Gaurav Parekh

Doctoral Dissertations

In this study, we have explored the application of the Layer-by-Layer (LbL) assembly technique for improving injectable drug delivery systems of low soluble anticancer drugs (e.g. Camptothecin (CPT), Paclitaxel (PTX) or Doxorubicin (DOX)). For this study, a polyelectrolyte shell encapsulates different types of drug nanocores (e.g. soft core, nanomicelle or solid lipid nanocores).The low soluble drugs tend to crystallize and precipitate in an aqueous medium. This is the reason they cannot be injected and may have low concentrations and low circulation time in the blood. Even though these drugs when present in the cancer microenvironment have high anti-tumor inhibition, the …

Intrusion Detection System Of Industrial Control Networks Using Network Telemetry, Stanislav Ponomarev

Doctoral Dissertations

Industrial Control Systems (ICSs) are designed, implemented, and deployed in most major spheres of production, business, and entertainment. ICSs are commonly split into two subsystems - Programmable Logic Controllers (PLCs) and Supervisory Control And Data Acquisition (SCADA) systems - to achieve high safety, allow engineers to observe states of an ICS, and perform various configuration updates. Before wide adoption of the Internet, ICSs used "air-gap" security measures, where the ICS network was isolated from other networks, including the Internet, by a physical disconnect [1]. This level of security allowed ICS protocol designers to concentrate on the availability and safety of …

Role Of The Dewetting Mechanism On Moisture Damage In Asphalt Pavements, Nibert Elijah Saltibus

Doctoral Dissertations

Moisture damage is a major form of pavement distress that causes state and federal highways to undergo high maintenance cost (Bhasin, 2006). According to Hicks et al., (2003), in a survey conducted by the Colorado Department of Transportation, mainly including US agencies (1 Canadian Province), 82% of these agencies required the use of anti-strip treatment (additives) to avert moisture damage. Additionally, 87% of these agencies test for moisture susceptibility. Despite extensive research performed on the moisture damage mechanisms in flexible pavements, it has been a challenge to obtain one single test that can comprehensively quantify the damage and to also …

Gold Nanoparticle Enhancements In Electroporation Mediated Dna And Rna Therapeutics, Shuyan Huang

Doctoral Dissertations

Nonviral gene delivery methods have been explored as the replacement of viral systems for their low toxicity and immunogenicity. However, they have yet to reach levels competitive to their viral counterparts. Electroporation figured prominently as an effective nonviral gene delivery approach for its balance on the transfection efficiency and cell viability, no restrictions of probe or cell type, and operation simplicity. The commercial electroporation systems have been widely adopted in the past two decades but still carry drawbacks associated with the high applied electric voltage, unsatisfied delivery efficiency, and/or low cell viability. What we did was to improve electroporation performance …

Functional Clay Nanotubes And Composites, Yafei Zhao

Doctoral Dissertations

Tubular nanomaterials and their composites have been extensively studied in recent years in the fields of physics, chemistry, biology, and biomedicine. Carbon nanotube is the most commonly studied tubular nanomaterial; however, toxicity and high cost make it less attractive in industry and thus restricts its applications. Halloysite nanotubes, which are available in abundance in the United States as well as in other countries around the world, is a low-cost, unique and versatile aluminosilicate mineral with a chemical formula of Al4Si4O10(OH)8·nH2O. Basically, the halloysite tube diameter is around 50 nm and the length varies with different locations ranging from 0.4-1.5 μm. …

Creep And Shrinkage Behavior Of Fly Ash Based Geopolymer Concrete, Md Rashedul Islam

Doctoral Dissertations

The manuscript presented herein is based on the investigation of the short and long term properties of fly ash based geopolymer concrete (GPC) and their link to fly ash characteristics. Fly ash (FA) exhibits a significantly different particle morphology, which impacts the mechanical properties of the resulting GPC and typically contains impurities that fluctuate from one FA source to another. A key contribution of this research work is the capturing of the variability posed by the FA stockpile with a wide range of physical, chemical, and crystallographic characteristics as a source material to select the GPC mix design. In the …

Electrochemical Fatigue Crack Treatment, Konstantin Dolgan

Doctoral Dissertations

Fatigue is responsible for at least 50% of all mechanical and 90% of all metallic failures. Fatigue cracks often start at stress concentrations, and without timely and appropriate remediation, tend to exhibit relatively fast propagation that leads to property damage and sometimes serious accidents.

The objective of this research was to develop a new method of fatigue crack treatment in steel structures and estimate its efficiency and limitations. The method was based on placing fatigue cracks under compression by depositing nickel onto the surfaces of the cracks. The proposed method was applied to ASTM E399 compact-tension specimens machined from ASTM …

Improving Practices In Nanomedicine Through Near Real-Time Pharmacokinetic Analysis, Isidro B. Magana

Doctoral Dissertations

More than a decade into the development of gold nanoparticles, with multiple clinical trials underway, ongoing pre-clinical research continues towards better understanding in vivo interactions. The goal is treatment optimization through improved best practices. In an effort to collect information for healthcare providers enabling informed decisions in a relevant time frame, instrumentation for real-time plasma concentration (multi-wavelength photoplethysmography) and protocols for rapid elemental analysis (energy dispersive X-Ray fluorescence) of biopsied tumor tissue have been developed in a murine model. An initial analysis, designed to demonstrate the robust nature and utility of the techniques, revealed that area under the bioavailability curve …