Droplet-Based Fuel Property Measurements, Wanjun Dang

LSU Doctoral Dissertations

Ongoing work to find renewable biofuels to function as drop-in replacements or blending components with gasoline has identified a large number of fuel candidates. Given the vast number of potential biomass-derived fuel molecules and limited sample sizes, screening tools are required to down-select candidate fuels having desired physical properties to ensure good engine performance. This work investigates approaches for rapid screening of candidate fuels using micro-liter sample sizes targeting four properties -- surface tension, viscosity, heat of vaporization (HOV), and vapor pressure. Measurement techniques for fuel properties are developed based on unit phenomena for liquid fuel droplets including droplet oscillation …

The Application Of Deep Learning Algorithms To Pediatric Vascular Anomalies Using A Limited Dataset, Briana I. Robertson

Honors Theses

No abstract provided.

Growth, Characterization, And Mechanical Testing Of Diamond-Like Carbon Films, Tailei Qi

LSU Master's Theses

The high residual stresses within diamond-like carbon (DLC) films limit its thickness and make the film tend to delaminate from the substrate and be defective on the surface. To address this problem, a new plasma enhanced chemical vapor deposition system (PECVD) was set up to investigate the effects of different film growth parameters on the DLC films, such as chromium doping, gas fluxes, depositing pressures, bias voltages, and depositing times. After the film growth parameters were optimized, this condition was transferred from silicon wafer to SS316 steel plate to deposition of DLC films with some adjustments. Scanning electron microscopy (SEM) …

Cfd Simulations Of Macroscopic And Microscopic Multiphase Fluid Flow And Droplet Interaction, Aaron Harrington

LSU Master's Theses

Multiphase flow is a complex phenomenon which can be modeled on numerous different length scales, both macroscopically and microscopically. The use of a Euler-Euler model for Computation Fluid Dynamics (CFD) simulations of subcooled boiling phenomena is discussed in detail. The CFD conditions have been set up to mimic previous experimental conditions. A cylindrical vessel with subcooled liquid flow is heated along part of the axial wall of the vessel. A constant heat flux is applied to produce subcooled boiling. We discuss the development of the phase change within the vessel as well as the temperature profile, and validate the results …

Reaction Pathways Of Molecular Growth For Bay-Region Methyl-Substituted Polycyclic Aromatic Hydrocarbons During Supercritical Pyrolysis Of N-Decane, Venkata Sai Krishna Karthik Vutukuru

LSU Doctoral Dissertations

Prior to its combustion, fuel for future-highspeed aircraft will experience supercritical conditions, causing the fuel to undergo pyrolytic reactions that lead to the formation of polycyclic aromatic hydrocarbons (PAH), precursors to fuel-line solids that hinder aircraft’s safe operation. Therefore, understanding the formation pathways of PAH under supercritical conditions is important to preventing formation of these solids.

Previous work from our group has shown that n-alkanes are particularly problematic regarding solids formation and that the model fuel n-decane produces an abundance of aliphatics and one- to nine-ring aromatics—many of which are methyl-substituted. Some of these methyl-substituted PAH have their …

Asynchronous, Distributed Optical Mutual Exclusion And Applications, Ahmed Bahaael Mansour

LSU Doctoral Dissertations

Silicon photonics have drawn much recent interest in the setting of intra-chip andmodule communication. In this dissertation, we address a fundamental computationalproblem, mutual exclusion, in the setting of optical interconnects. As a main result, wepropose an optical network and an algorithm for it to distribute a token (shared resource)mutually exclusively among a set ofnprocessing elements. Following a request, the tokenis granted in constant amortized time andO(n) worst case time; this assumes constantpropagation time for light within the chip. Additionally, the distribution of tokens is fair,ensuring that no token request is denied more thann−1 times in succession; this is thebest possible. …

Numerical Investigation Of The Impact Of Distortion On The Hydrodynamics In The Lower Mississippi River Physical Model (Lmrpm), Ali Heidarizhaleh

LSU Doctoral Dissertations

The Lower Mississippi River Physical Model (LMRPM) is a distorted-scale, 1:6000 horizontal and 1:400 vertical, movable-bed model that is being used to complement ongoing numerical and field studies directed at studying how non-cohesive sediment transport will be impacted by future changes in relative sea level rise and river discharges, as well various management strategies, such as river sediment diversions, in the lower ~190 miles of the Mississippi River The LMRPM was designed using Froude number (Fr) similarity between the prototype and the model, while the flow Reynolds number is relaxed, but determined to be high enough to ensure rough turbulent …

Application Of Gas-Assisted Gravity Drainage (Gagd) Process For Enhancing Recovery From Unconventional Resources, Muzher Al Musabeh

LSU Doctoral Dissertations

The oil recovery with hydraulic fracturing has played an important role in hydrocarbon production and energy support last decade from unconventional resources. Characteristically, the significant production decline and low recovery factors from these reservoirs triggered the need for new EOR techniques to compensate for the decline and help sustain the production. In this study, an experimental investigation of the Gas-Assisted Gravity Drainage (GAGD) process in the presence of fractures as EOR process was conducted using Nitrogen (N2) and Carbon Dioxide (CO2) in Berea Sandstone (BSS) and Tuscaloosa Marine Shale (TMS). Core flooding and EOR experiments were used to determine the …

Investigation Of Sand-Biochar Mixtures As A Potential Roadway Fill Material, Katia J. Lele Lagmago

LSU Master's Theses

Biochar is a sustainable and lightweight carbon-rich material with a high surface area and porosity. Previous studies reported that biochar can reduce soil erosion and cracking, retain contaminants, and enhance soil aggregation. Given these favorable properties, soil-biochar mixtures have the possibility to serve as a multifunctional lightweight fill material for roadway embankment applications. The purpose of this research is to develop sand-biochar mixtures as a sustainable and multifunctional lightweight fill material for roadway embankment applications.

This research investigated the consolidation and hydraulic properties of sand-biochar mixtures by (1) performing 1D consolidation tests, (2) performing permeability tests, and (3) assessing the …

An Interactive Software Tool To Assist Dsp Education Of Electrical And Computer Engineering Undergraduates Through Audio, Kyle Andrew Sellers

Honors Theses

No abstract provided.

Investigating Black Silicon Surface Geometry Via Parameter Modification And Low Flow Inductively Coupled Plasma Deep Reactive Ion Etching, Noah Mulherin Smith

Honors Theses

No abstract provided.

A Modular Open-Technology Device To Measure And Adjust Concentration Of Sperm Samples For Cryopreservation, Nikolas C. Zuchowicz

LSU Master's Theses

Repositories for aquatic germplasm can safeguard the genetic diversity of species of interest to aquaculture, research, and conservation. The development of such repositories is impeded by a lack of standardization both within laboratories and across the research community. Protocols for cryopreservation are often developed ad hoc and without close attention to variables, such as sperm concentration, that strongly affect the success and consistency of cryopreservation. The wide dissemination and use of specialized tools and devices can improve processing reliability, provide data logging, produce custom hardware to address unique problems, and save costs, time, and labor. The goal of the present …

Engineering The Surface Of Fe3o4 Nanoparticles For Catalytic And Magnetic Applications, Natalia Da Silva Moura

LSU Doctoral Dissertations

With the rapid depletion of the U.S. energy resources coupled with population growth, heat management technologies must be improved to sustain our quality of life. Precisely, in catalysis, it is estimated that only ~50% of the energy supplied to the reactor is used for product conversion due to dissipation losses. Among the emerging technologies with a promising reduction in heat losses is induction heating, offering targeted heat delivery with magnetic nanoparticles. Under alternating magnetic fields (AMF), these nanoparticles can absorb the energy from Radio-Frequency (RF) fields and dissipate it as heat on the nanoparticle surface. This in situ heat generation …

Communications, Decision-Making, And Interactions Of A Multi-Agent Autonomous Vehicle System, Daniel Davis Smith

LSU Doctoral Dissertations

Autonomous vehicles are becoming ever more common and offer many attractive benefits to society. They can operate for long periods of time unattended, operate in environments that may be dangerous to humans, perform time consuming or repetitive tasks and all with greater efficiency and lower costs than humans. For these vehicles to be able to do these things, algorithms need to be designed and optimized that allow them to interact with the real-world environment in safe, effective, and efficient ways.

We designed and built a set of three homogeneous water-based autonomous surface vehicles equipped with appropriate sensors and communications ability …

Laser Surface Treatment And Laser Powder Bed Fusion Additive Manufacturing Study Using Custom Designed 3d Printer And The Application Of Machine Learning In Materials Science, Hao Wen

LSU Doctoral Dissertations

Selective Laser Melting (SLM) is a laser powder bed fusion (L-PBF) based additive manufacturing (AM) method, which uses a laser beam to melt the selected areas of the metal powder bed. A customized SLM 3D printer that can handle a small quantity of metal powders was built in the lab to achieve versatile research purposes. The hardware design, electrical diagrams, and software functions are introduced in Chapter 2. Several laser surface engineering and SLM experiments were conducted using this customized machine which showed the functionality of the machine and some prospective fields that this machine can be utilized. Chapter 3 …

Characterization Of Application-Driven Sol-Gel Coated Meshes And Composites, Armaghan Naderi

LSU Doctoral Dissertations

Surface engineering is a multi-disciplinary research area that encompasses disciplines such as materials science, chemistry, mechanical engineering, and electrical engineering. Coating is a surface modification technique in surface engineering, applied on the surface of a substrate (i.e., bulk material), to cover/protect it from environmental degradation or to modify/improve surface properties for specific applications. This PhD research presents an in-depth investigation of sol-gel ceramic coatings to modify surface characteristics of bulk materials for two specific applications: 1) antistatic/antidust applications, and 2) biomaterial implant applications.

First, zirconia antistatic thin films on glass substrates, and their application to polymer-based composites, was studied. Zirconia …

Direct Activation Of Light Alkanes To Value-Added Chemicals Using Supported Metal Oxide Catalysts, Md Ashraful Abedin

LSU Doctoral Dissertations

One of the most challenging aspects of modern-day catalysis is the conversion of methane. Direct conversion of methane via dehydroaromatization (MDHA) is a well-known process which can produce valuable hydrocarbons. Mo oxide supported on ZSM-5/MCM-22 has been studied extensively in recent years for MDHA. Mo carbides are responsible for activating methane by forming CHx species. These are dimerized into C2Hy and oligomerized on ZSM-5/MCM-22 Brønsted acid sites to form aromatics. Sulfated zirconia (SZ) supported Mo catalyst contains the acid sites necessary to produce benzene in MDHA. Here, sulfated hafnia (SH), a homologous oxide like SZ, has been proposed to provide …

A Conceptual Framework For Phase-Dependent, Composite Flood Risk Index (Fri) Curves Based On The Relationship Between Temporal Probability Of Flood Occurring (Ph) And Flood Vulnerability Index (Fvi) Along With Maps Of Fvi Within The Amite River Basin Based On The August 2016 Flood., Austin S. Guerin Mr.

LSU Master's Theses

Efforts directed at determining community vulnerability to flooding are limited and only include economic (dollar damages) and public safety impacts and do not consider the phase dependency of the system, i.e., pre-, during- and post-storm, both critical shortcomings for more broadly assessing community risk and developing comprehensive plans and mitigation strategies. This thesis first develops a framework based on a Flood-Vulnerability Index (FVI) approach and then demonstrates its usefulness, at the census tract level of detail, for three parishes in the Greater Baton Rouge, LA area, based on the August 2016 flood. FVI’s indicators are multidimensional and phase dependent: “Pre-Flood” …

Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent, Bulbul Ahmed

LSU Master's Theses

Hemp is considered as one of the sustainable agricultural fiber materials. Degumming or surface modification of hemp bast is needed to produce single fibers for ensuing textile and industrial applications. The traditional degumming process necessitates a high amount of alkali, which causes detrimental environmental pollution. This study offers a new method to degum hemp fibers with reduced use of harmful alkali and precious water resources. In this work, hemp bast fibers were degummed by using combined microwave energy and deep eutectic solvent (DES). The properties of hemp fibers manufactured by this method were investigated and compared with the traditional alkali …

Evaluation Of Cell Concentration And Viability By Impedance Spectroscopy On Microfluidic Devices, Jason Eades

LSU Master's Theses

This document describes two distinct platforms that implement electrochemical impedance spectroscopy (EIS) within microfluidic devices for rapid, label-free cell analysis. Each study provides proof-of-concept evaluations of these devices for cell counting and viability analysis applications to mitigate some of the challenges associated with conventional methods. Chapter one includes background information on each version of EIS selected and motivations for the studies conducted. Chapter two describes the design and fabrication of a modular, reusable microfluidic device. Additionally, the methodology for and results from the application of this platform for the measurement of zebrafish sperm cell concentrations are presented. Chapter three describes …

Gas Evolution Phenomenon Of Methane In Base Fluids Of Non-Aqueous Drilling Muds Under Controlled Depressurization, Damilola Ojedeji

LSU Master's Theses

As wells become more complex and drilling conditions to reach targets prove even more challenging, being able to detect influx event early and safely handle these influxes has become one of the most important focus areas for improvement in well control safety. The high solubility of formation gas in non-aqueous drilling fluids however makes kick detection and safe handling of kicks more complicated. Recent studies are beginning to incorporate desorption kinetics in well control models to simulate the transient multiphase flow phenomenon associated with gas kicks in non-aqueous drilling fluids to foster safe handling of kicks. However, there is currently …

A Study Of Methane-Liquid Absorption Characteristics For Gas Influx Management, Scott A. Perry

LSU Master's Theses

The study of absorption mass transfer kinetics in non-aqueous base fluids and the investigation of the parameters that influence this process is crucial in the application to gas influx management. While there have been a large number of studies investigating the interaction and solubility of methane in non-aqueous drilling fluids, relatively little attention has been placed on studying the mass transfer kinetics for different scenarios within the wellbore and riser. During the drilling process, there are multiple ways in which the formation gas can come into contact with the drilling fluid via a gas kick. Once the gas influx dissolves …

Evaluating Word Embedding Models For Traceability, Mahfuza Khatun, Mahfuza Khatun

LSU Master's Theses

ABSTRACT

Traceability link recovery (TLR) is a software engineering activity that helps to ensure software quality and assists with keeping track of changes by establishing links between software artifacts that are a part of the software engineering process, such as requirements, use cases, source code, test cases, and documentation. Software requirement artifacts are typically written in natural language. An Information Retrieval process is frequently used in many software activities, including the TLR activity. Recently, Word Embedding (WE) techniques have been used in many natural language processing tasks as well as in TLR tasks. We investigate the effectiveness of WE techniques …

Finite Element Numerical Modeling And Parametric Study Of Geosynthetic Reinforced Pile-Supported Embankments, Abdallah Ikbarieh

LSU Master's Theses

This study directed at investigating the performance of the pile-supported embankment system utilizing a geosynthetic reinforced load transfer platform (GRLTP) using Finite Element numerical modeling. A 2D Finite Element Modeling (FEM) methodology was first developed using PLAXIS 2D 2021 computer software and verified by well-documented case studies in the literature of this system. Second, a performance prediction was made for a field case study of the Amite River Project near French Settlement, which is located along Route LA 16 Livingston Parish in Louisiana State. A comprehensive FEM parametric study was then carried out to evaluate the performance of the system …

An Improved Earned Value Management Method Integrating Quality And Safety, Brian Briggs

LSU Doctoral Dissertations

The construction industry invests significant time and money to improve quality and safety while reducing cost and schedule impacts. The industry has a sincere desire to improve construction project management methods to improve efficiency. Historically, quality and safety underperformances result from undermanaged quality control and safety activities. The cost and schedule impacts associated with poor quality work have always had an impact on construction operations. The unprecedented challenges and uncertainties of COVID-19 highlighted the need to improve the Earned Value Management (EVM) method within construction to reflect these quality and safety activities. The central goal of this dissertation is to …

Assessment Of Long-Term Performance Of Pavements Containing Warm Mix Asphalt Technologies In Louisiana, Kwadwo Ampadu Boateng

LSU Master's Theses

This study focused on the assessment of long-term performance of asphalt pavements containing warm mix asphalt technologies in Louisiana. A total of five rehabilitation projects were studied in the state of Louisiana. The study consisted of engineering desk analyses of field performance indicators, indices and the initial laboratory performance indicators measured for five rehabilitation projects.

The engineering desk study consisted of a review of literature from previous WMA technology projects done in Louisiana. Additionally, data was acquired and validated from the Louisiana Pavement Management System (PMS). Pavement performance indicators (i.e., cracking (transverse, longitudinal, and fatigue cracking), roughness, rutting, and pavement …

Lyapunov Function-Based Stabilizing Control Scheme For Wireless Power Transfer Systems With Lcc Compensation Network, Abu Shahir Md Khalid Hasan

LSU Master's Theses

A stabilizing control scheme based on a Lyapunov function is proposed for wireless power transfer (or WPT) systems. A state-space model of the WPT system is developed and the Lyapunov function is formulated based on an energy equation of the system involving state variables. The internal resistance of a battery varies during charge and discharge. Therefore, if a WPT system is used to charge a battery, its output load will vary. Furthermore, the coupling coefficient between the transmitter (primary) and receiver (secondary) coils decreases when they are misaligned. Comparative case studies are conducted to verify the efficacy of the proposed …

Enhanced Oil Recovery In Tight Rocks Using The “Slot-Drill” Completion, Hassan Amer

LSU Master's Theses

Enhanced oil recovery (EOR) is essential in shale/tight formations because primary recovery typically produces less than 10% of the original hydrocarbon in-place (OHIP). This work presents a novel “slot-drill” EOR technology, which involves injecting gas through a horizontal fracture that is cut into the formation near the top of the reservoir (using a tensioned abrasive cutting cable mounted to the drillstring) and producing oil from a second slot-drilled horizontal fracture near the bottom of the reservoir.

The dusty-gas diffusion model was implemented in a compositional simulator to account for the diffusion mechanism expected during the injection of gases in this …

Impact Of Personality Traits And Team Criteria On Construction Team Performance, Arlys Silva Payne

LSU Doctoral Dissertations

This dissertation investigated how personality traits and team criteria influence team performance in real construction projects. Though personality influence on team performance has been significantly investigated in other business sectors, the literature revealed that the construction industry lacks investigations regarding personality influencing team performance. The existing literature revealed that the Big Five Factors (BFF) was the most popular assessment tool for personality. Thus, this dissertation adopted the 50-Item Personality questionnaire developed by Goldberg, which consited of extraversion, aggreeableness, conscientiousness, neuroticism, and openness to experience. The literature also revealed several common team criteria to evaluate team performance: team member satisfaction, shared …

Single-Family Residential Flood Loss Reduction Through Freeboard, Ehab Said Gnan

LSU Doctoral Dissertations

The lack of flood loss estimation methods conducted on a micro-scale level that consider the full loss‐exceedance probabilities curve poses a significant problem in flood risk assessment. Also, the lack of robust benefit-cost analysis (BCA) that quantifies benefits at the micro-scale level leads to sub-optimal results, and therefore sub-optimal decisions when determining the optimal freeboard. Further, flood loss assessments focus on owner-occupied housing and neglect rental housing. These loss assessment deficiencies underscore the need for a robust assessment that quantifies the life-cycle benefits for all stakeholders and provides actionable information to enable informed decisions.

This research presents a comprehensive methodology …