Engineering Commons^™

Artificial Intelligence-Assisted Inertial Geomagnetic Passive Navigation, Andrei Cuenca

Doctoral Dissertations and Master's Theses

In recent years, the integration of machine learning techniques into navigation systems has garnered significant interest due to their potential to improve estimation accuracy and system robustness. This doctoral dissertation investigates the use of Deep Learning combined with a Rao-Blackwellized Particle Filter for enhancing geomagnetic navigation in airborne simulated missions.

A simulation framework is developed to facilitate the evaluation of the proposed navigation system. This framework includes a detailed aircraft model, a mathematical representation of the Earth's magnetic field, and the incorporation of real-world magnetic field data obtained from online databases. The setup allows an accurate assessment of the performance …

Deep-Learning Based Multiple-Model Bayesian Architecture For Spacecraft Fault Estimation, Rocio Jado Puente

Doctoral Dissertations and Master's Theses

This thesis presents recent findings regarding the performance of an intelligent architecture designed for spacecraft fault estimation. The approach incorporates a collection of systematically organized autoencoders within a Bayesian framework, enabling early detection and classification of various spacecraft faults such as reaction-wheel damage, sensor faults, and power system degradation.

To assess the effectiveness of this architecture, a range of performance metrics is employed. Through extensive numerical simulations and in-lab experimental testing utilizing a dedicated spacecraft testbed, the capabilities and accuracy of the proposed intelligent architecture are analyzed. These evaluations provide valuable insights into the architecture's ability to detect and classify …

Verification And Validation Of Robot Manipulator Adaptive Control With Actuator Deficiency, Sebastian Comeaux

Doctoral Dissertations and Master's Theses

This work addresses the joint tracking problem of robotic manipulators with uncertain dynamical parameters and actuator deficiencies, in the form of an uncertain control effectiveness matrix, through adaptive control design, simulation, and experimentation. Specifically, two novel adaptive controller formulations are implemented and tested via simulation and experimentation. The proposed adaptive control formulations are designed to compensate for uncertainties in the dynamical system parameters as well as uncertainties in the control effectiveness matrix that pre-multiplies the control input. The uncertainty compensation of the dynamical parameters is achieved via the use of the desired model compensation–based adaptation, while the uncertainties related to …

Stochastic Point Process Modeling For Engineering Applications, Samarth Motagi

Doctoral Dissertations and Master's Theses

Hawkes model or self-exciting point process model is a branching point process model. The model classifies the dataset of discrete events to background and offspring events. It has been used to study interconnected events in many fields, but relatively little work exists in applying these concepts to engineering problems. In our research, we use a self-exciting point process model for two engineering applications: (a) To identify secondary crashes from a given traffic data and (b) To quantify the agglomeration state and size of nanoparticles from computationally generated carbon nanotube microstructure using stochastic percolation model and experimentally generated titanium nanoparticle microstructures. …

Comparison Of Methods For Estimating Instantaneous Turn Radius Of Ackermann Steering Vehicles, Kenneth Gennaro Stutts

Doctoral Dissertations and Master's Theses

The instantaneous turn radius of an Ackermann steering vehicle is the distance to a point in space about which the vehicle will travel in an arc during a turn. There are at least six ways to estimate instantaneous turn radius and each method uses different inputs and has distinct advantages and disadvantages. In this thesis, six different methods will be used to estimate the instantaneous turn radius of a vehicle traveling on a closed circuit. This testing will clarify similarities and differences between the methods. This thesis clarifies which method will be the most appropriate for a given set of …

Comparative Evaluation Of Propulsive Power Transmission Technologies For High-Speed Vertical Takeoff And Landing (Hsvtol) Cargo Aircraft, Xinyu Yang

Doctoral Dissertations and Master's Theses

Designing High-Speed Vertical Takeoff and Landing (HSVTOL) cargo aircraft capable of both low downwash velocity hovering and high subsonic speed cruising presents a significant engineering challenge. This challenge, stemming from conflicting design requirements, has been substantially influenced by recent technological advancements, which have offered greater flexibility in rotor placement. Consequently, this has led to the emergence of innovative mission-specific designs that hold the potential to outperform traditional concepts. The central objective of this study is to evaluate the benefits of modern technologies for VTOL cargo aircraft and assess their performance relative to baseline VTOL aircraft. The results of this comparative …

Development Of A Constellation Simulator For A 5g/Iot Mission Planning System, Franco Criscola

Doctoral Dissertations and Master's Theses

The advancement of 5G and Internet-of-Things technologies has presented new challenges for telecommunications providers. One of the challenges is integrating these technologies with present networks. A solution has been found in low-Earth orbit satellite constellations. On one hand, this method increases coverage and reduces costs, but on the other it raises new problems like how to efficiently manage large constellations of spacecraft. This thesis introduces the Constellation Management System, developed in collaboration with i2Cat foundation. This novel tool is composed of two modules: the simulator and the scheduler. The former propagates satellite motion and computes visibility events to various targets …

Design And Characterization Of A High Pressure Flow Loop For Heat Transfer Experiments Of Supercritical Carbon Dioxide, Joseph Sauerbrun

Doctoral Dissertations and Master's Theses

Supercritical carbon dioxide (sCO2) sees heightened heat transfer characteristics near its critical point due to its drastically changing thermophysical properties. Conventional single phase heat transfer theory was not developed to capture this nonlinear variation in properties and cannot predict the heat transfer characteristics of sCO2 to a practical level useful for design. To delve deeper into the behavior near the critical point and shed light on this crucial phenomenon, a state-of-the-art closed flow loop was developed. This setup enabled convective heat transfer experiments of sCO2 under diverse boundary conditions and test section geometries. Key components of the loop include the …

Designing Tomorrow's Reality: The Development And Validation Of An Augmented And Mixed Reality Heuristic Checklist, Jessyca Derby

Doctoral Dissertations and Master's Theses

Augmented (AR) and Mixed Reality (MR) are new and currently developing technologies. They have been used and shown promise and popularity in the domains of education, training, enterprise, retail, consumer products, and more. However, there is a lack of consistency and standards in AR and MR devices and applications. Interactions and standards in one application may drastically differ from another. This may make it difficult for users, especially those new to these technologies, to learn and feel comfortable using the devices or applications. It may also hinder the usability of the applications as designers may not follow proven techniques to …

Online Aircraft System Identification Using A Novel Parameter Informed Reinforcement Learning Method, Nathan Schaff

Doctoral Dissertations and Master's Theses

This thesis presents the development and analysis of a novel method for training reinforcement learning neural networks for online aircraft system identification of multiple similar linear systems, such as all fixed wing aircraft. This approach, termed Parameter Informed Reinforcement Learning (PIRL), dictates that reinforcement learning neural networks should be trained using input and output trajectory/history data as is convention; however, the PIRL method also includes any known and relevant aircraft parameters, such as airspeed, altitude, center of gravity location and/or others. Through this, the PIRL Agent is better suited to identify novel/test-set aircraft.

First, the PIRL method is applied to …

Rigid Body Constrained Motion Optimization And Control On Lie Groups And Their Tangent Bundles, Brennan S. Mccann

Doctoral Dissertations and Master's Theses

Rigid body motion requires formulations where rotational and translational motion are accounted for appropriately. Two Lie groups, the special orthogonal group SO(3) and the space of quaternions H, are commonly used to represent attitude. When considering rigid body pose, that is spacecraft position and attitude, the special Euclidean group SE(3) and the space of dual quaternions DH are frequently utilized. All these groups are Lie groups and Riemannian manifolds, and these identifications have profound implications for dynamics and controls. The trajectory optimization and optimal control problem on Riemannian manifolds presents significant opportunities for theoretical development. Riemannian optimization is an attractive …

Interfacial Thermomechanical Behavior Of Hybrid Carbon Fibers, Sriraj Srihari

Doctoral Dissertations and Master's Theses

The carbon fiber/epoxy interface is of great importance in composite design due to its load transfer mechanisms from the weak epoxy to the stronger fiber. Improving the strength of the interface reduces the risk of failure at the interface and improves the load transfer to the fiber. In this study, two types of nano-species ZnO nanowires and nickel-based metal organic frameworks were grown on carbon fibers to improve the interfaces. The interfacial mechanics of the enhanced fibers are evaluated using nanoindentation studies. Composite samples with Aeropoxy matrix and vertically aligned fibers are fabricated for this purpose. A Bruker TI-980 TriboIndenter …

Explorations In Monocular Distance And Ranging (Modar) Techniques For Real-World Applications, Devon Vail

Doctoral Dissertations and Master's Theses

In this work, an initial prototype of a monocular camera system capable of retrieving depth-from-focus using a liquid focus-tunable lens is constructed out of hobby-grade photography equipment. This concept has been explored previously in laboratory settings using specialized equipment; this work seeks to determine the feasibility of retrieving depth-from-focus using commercially available components. To achieve this, an iterative exploration of existing techniques was performed to verify their utility in the final ensemble of processes to retrieve depth from 2D images. Initially, blurry images were simulated by applying Gaussian blur to test images to verify the functionality of a Laplacian of …

Spoken Language Processing And Modeling For Aviation Communications, Aaron Van De Brook

Doctoral Dissertations and Master's Theses

With recent advances in machine learning and deep learning technologies and the creation of larger aviation-specific corpora, applying natural language processing technologies, especially those based on transformer neural networks, to aviation communications is becoming increasingly feasible. Previous work has focused on machine learning applications to natural language processing, such as N-grams and word lattices. This thesis experiments with a process for pretraining transformer-based language models on aviation English corpora and compare the effectiveness and performance of language models transfer learned from pretrained checkpoints and those trained from their base weight initializations (trained from scratch). The results suggest that transformer language …

Towards Agile Academia: An Approach To Scientific Paper Writing Inspired By Software Engineering, Tyler Procko

Doctoral Dissertations and Master's Theses

The construction of scientific papers is performed in service of the greater scientific community. This iterative process is, in effect, an academic economy, where all members benefit from well-written papers. However, many published scientific papers are poorly written; they often lack sufficient detail to allow replication, there is improper usage of citations or a lack of regard to relevant work, reporting is vague or without linked empirical data to allow verification, figures do not correspond to text or are non-sensical, literary elements, e.g., bulleted lists, are used ineffectively, formatting renders certain sections unreadable, and grammatical errors abound. The issues of …

The Influence Of Mixing Duct Length And Phase Of Flight On Wall Temperatures Of A Rocket Based Combined Cycle Engine In Ejector And Air-Augmented Modes, Jonathan Grow

Doctoral Dissertations and Master's Theses

Rocket Based Combined Cycle (RBCC) engines have been theorized as a possible means of powering launch vehicles and high-speed atmospheric vehicles. By incorporating aspects of both air-breathing and rocket propulsion, RBCC engines promise up to a 230 % increase in specific impulse over traditional chemical rocket propulsion by entraining a secondary flow of atmospheric air and mixing it with the exhaust of a rocket motor. Students within the Embry-Riddle Future Space Explorers and Developers Society (ERFSEDS) identified a
problem of excessive heating and structural failure of the mixing duct during launch and transonic flight of a student-built flight test vehicle. …

Neural Network Models For Generating Synthetic Flight Data, Nathaniel Sisson

Doctoral Dissertations and Master's Theses

Flight test data is a valuable resource used in many aerospace applications. However, procuring a sufficiently large database of flight test data poses several challenges. Nominal flight tests can be expensive and time-consuming and require much post-processing depending on the availability of sensors and the quality of the sensor output. Flight test performed outside of nominal flight conditions, or flight tests in which failures are introduced, add to the inherent risk and danger associated with flight tests. The most popular alternative to flight test, numerical simulations, may fail to fully capture all non-linear behavior. While flight tests will always be …

Deep Cnn-Based Automated Optical Inspection For Aerospace Components, Shashi Bhushan Jha

Doctoral Dissertations and Master's Theses

ABSTRACT

The defect detection problem is of outmost importance in high-tech industries such as aerospace manufacturing and is widely employed using automated industrial quality control systems. In the aerospace manufacturing industry, composite materials are extensively applied as structural components in civilian and military aircraft. To ensure the quality of the product and high reliability, manual inspection and traditional automatic optical inspection have been employed to identify the defects throughout production and maintenance. These inspection techniques have several limitations such as tedious, time- consuming, inconsistent, subjective, labor intensive, expensive, etc. To make the operation effective and efficient, modern automated optical inspection …

Resilience Model For Teams Of Autonomous Unmanned Aerial Vehicles (Uav) Executing Surveillance Missions, Robert Koeneke

Doctoral Dissertations and Master's Theses

Teams of low-cost Unmanned Aerial Vehicles (UAVs) have gained acceptance as an alternative for cooperatively searching and surveilling terrains. These UAVs are assembled with low-reliability components, so unit failures are possible. Losing UAVs to failures decreases the team's coverage efficiency and impacts communication, given that UAVs are also communication nodes. Such is the case of a Flying Ad Hoc Network (FANET), where the failure of a communication node may isolate segments of the network covering several nodes. The main goal of this study is to develop a resilience model that would allow us to analyze the effects of individual UAV …

Aeroponic System Optimization For Butterhead Lettuce Growth And Future Sustainability Using Flow Blurring Atomization, Taylor J. Johnson

Doctoral Dissertations and Master's Theses

The global population has grown by 6 billion people over the last century and is trending toward 9.7 billion people by the year 2050. Agriculture accounts for 70% of global fresh water usage. Technology must be developed to accommodate the increase of food production demanded by the growing global population and the subsequent increase in water usage. Aeroponic technology is a water-efficient vertical farming technology that can reduce water usage by 90% by suspending plant roots in air within a controlled chamber and supplying atomized droplets of a water-nutrient solution directly to the roots.

This study simultaneously tests six droplet …

In-Situ Thermal And Deformation Characterization Of Additive Manufacturing Processes, Nicholas Phillips

Doctoral Dissertations and Master's Theses

Additive manufacturing (AM) is a rapidly growing industry with numerous applications in the aerospace industry such as aircraft parts and emergency tools on the International Space Station. Defects in additively manufactured structures, however, can waste a lot of time and money. Being able to monitor the manufacturing process for defects is one of the first steps which can be taken to mitigate these losses. This study focuses on the use of thermography in conjunction with deep learning to identify flaws during 3D printing of composite structures made using Onyx, a mixture of chopped carbon fiber and nylon, composite prints. In …

Modeling, Control, And Hardware Development Of A Thrust-Vector Coaxial Uav, Andrew North

Doctoral Dissertations and Master's Theses

This thesis introduces a unique thrust vector coaxial unmanned aerial vehicle (UAV) configuration and presents a comprehensive investigation encompassing dynamics modeling, hardware design, and controller development. Using the Newton-Euler method, a dynamic model for the UAV is derived to gain in-depth insights into its fundamental flight characteristics. A simple thrust model is formulated and modified by comparing it with data obtained from vehicle testing. The feasibility of manufacturing such a vehicle is assessed through the development of a hardware prototype. Finally, a linear state feedback controller is designed and evaluated using the non-linear dynamics model. The results demonstrate successful validation …

Identification And Validation Of A Predicted Risk-Taking Propensity Model Among General Aviation Pilots, Joel Samu

Doctoral Dissertations and Master's Theses

Risk-taking, a persistent topic of interest and concern in aviation, has been linked with unsafe behaviors and accidents. However, risk-taking propensity is a complex construct that encompasses numerous factors still being researched. Even within the limited research available about the factors affecting pilots’ risk-taking propensity, studies have yielded inconsistent results. Therefore, this quantitative study explores existing and novel factors that predict the propensity for risk-taking among general aviation (GA) pilots in the United States.

This study, conducted in two stages, involved developing a prediction model using backward stepwise regression to predict pilots’ risk propensity, followed by model fit testing using …

An Online Adaptive Machine Learning Framework For Autonomous Fault Detection, Nolan Coulter

Doctoral Dissertations and Master's Theses

The increasing complexity and autonomy of modern systems, particularly in the aerospace industry, demand robust and adaptive fault detection and health management solutions. The development of a data-driven fault detection system that can adapt to varying conditions and system changes is critical to the performance, safety, and reliability of these systems. This dissertation presents a novel fault detection approach based on the integration of the artificial immune system (AIS) paradigm and Online Support Vector Machines (OSVM). Together, these algorithms create the Artificial Immune System augemented Online Support Vector Machine (AISOSVM).

The AISOSVM framework combines the strengths of the AIS and …

Online Estimation Of Unknown Parameters For Flexible Spacecraft, Nicolo Woodward

Doctoral Dissertations and Master's Theses

Attitude controls methods of highly flexible spacecraft have seen increased interest over the last decades thanks to the technological development of flexible solar panels and deploy-ables, which improves the capabilities of small satellites. However, a high-fidelity model of the flexible mode dynamics is hard to obtain in on-ground testing because not all modes of frequencies can be observed, complicating the controller design. Furthermore, plastic deformations due to long periods of storage of stowed flexible components could result in exciting frequencies outside of the designed controller’s bandwidth, leading to an uncontrollable system. This thesis proposes a method to develop a high-fidelity …

Atmospheric Carbon Capture: A Review On Current Technologies And Analysis Of Energy Consumption For Various Direct Air Capture (Dac) Systems, Jennifer Perskin

Doctoral Dissertations and Master's Theses

Carbon dioxide (CO₂) capture is a crucial approach to reducing greenhouse gases in the atmosphere to directly combat climate change. Major components of the technology to desublimate CO₂ at cryogenic temperatures are mature and have the potential to be applied to build large Arctic/Antarctic direct-air CO₂ capture plants. Pressure swing adsorption another gas separation technique used in industry today that can be modified for atmospheric carbon capture. The discussion of energy consumption for cryogenic and combined direct air capture systems is explored in this study. The investigation of precompression of atmospheric air for a direct-air capture …

Deep Learning Of Semantic Image Labels On Hdr Imagery In A Maritime Environment, Charles Montagnoli

Doctoral Dissertations and Master's Theses

Situational awareness in the maritime environment can be extremely challenging. The maritime environment is highly dynamic and largely undefined, requiring the perception of many potential hazards in the shared maritime environment. One particular challenge is the effect of direct-sunlight exposure and specular reflection causing degradation of camera reliability. It is for this reason then, in this work, the use of High-Dynamic Range imagery for deep learning of semantic image labels is studied in a littoral environment. This study theorizes that the use HDR imagery may be extremely beneficial for the purpose of situational awareness in maritime environments due to the …

Solar Sailing Adaptive Control Using Integral Concurrent Learning For Solar Flux Estimation, Luis Mendoza Zambrano

Doctoral Dissertations and Master's Theses

In the interest of exploiting natural forces for propellant-less spacecraft missions, this thesis proposes an adaptive control strategy to account for unknown parameters in the dynamic modeling of a reflectivity-controlled solar sail spacecraft. A Lyapunov-based control law along with integral concurrent learning is suggested to accomplish and prove global exponential tracking of the estimated parameters and states of interest, without satisfying the common persistence of excitation condition, which in most nonlinear systems cannot be guaranteed a priori. This involves estimating the solar flux or irradiance from the Sun to account for uncertainty and variation over time in this value. To …

Writing Matters: Investigating The Quality Of Collegiate Aviation Incident Report Narratives, Kayla D. Taylor

Doctoral Dissertations and Master's Theses

Strong communication skills are fundamental to workplace success in the field of aviation. Numerous studies have shown that a deficiency in communication skills contributes to aviation accidents, and, as a result, the development of communication competencies within the aviation industry has received considerable critical attention. Understanding the acquisition and subsequent progression of writing skills throughout a pilot’s education, specifically in preparatory aviation courses, is an emerging area of research in aviation communication.

This study examined how the level of supplemental discipline-specific guidance affects the writing quality of incident report narratives composed by collegiate pilot students at Embry-Riddle Aeronautical University (ERAU). …

Prediction & Active Control Of Multi-Rotor Noise, Samuel O. Afari

Doctoral Dissertations and Master's Theses

Significant developments have been made in designing and implementation of Advanced Air Mobility Vehicles (AAMV). However, wider applications in urban areas require addressing several challenges, such as safety and quietness. These vehicles differ from conventional helicopter in that they operate at a relatively lower Reynolds number. More chiefly, they operate with multiples of rotors, which may pose some issues aerodynamically, as well as acoustically. The aim of this research is to first investigate the various noise sources in multi-rotor systems. High-fidelity simulations of two in-line counter-rotating propellers in hover, and in forward flight conditions are performed. Near field flow and …