Engineering Commons^™

Improving Lignin Recovery From Paper Mill And Biorefinery Waste Streams Via Liquid-Phase Splitting, Carter Fitzgerald

All Dissertations

Lignin is an abundant biopolymer with significant promise due to its aromaticity. It has been targeted as a replacement for a number of petroleum-based products including adhesives, coatings, polyurethane foams, activated carbon, and carbon fibers. However, commercially available bulk lignins are too polydisperse, and contain too many residual metals from the pulping process that are detrimental to the properties of the final product.

The Sequential Liquid-lignin Recovery and Purification (SLRP) process was developed by Michael Lake and John Blackburn, in collaboration with Clemson, with the intention of creating a continuous method for recovering lignin from paper-mill black liquors. Thies and …

Mysteerio: Multi-Regional Environmentally Extended Input-Output Model For United States, Yash Srivastava

All Theses

This research work titled My State Environmentally Extended Regional Input-Output (MYSTEERIO) is based on the concept of multi-regional environmentally extended input-output (MREEIO), which is a combination of lifecycle thinking and economics principles. Numerous studies have highlighted the advantages of using this methodology to determine the environmental impacts associated with economic activities for a region. However, no prior attempt has been made to conduct a state-level analysis for the US. This research work thus tries to estimate the impacts embodied due to the consumption of goods and services at the state level by using the MREEIO principles. Extensive coverage of the …

Integration Of Techno-Economic Analysis (Tea) And Life Cycle Assessment (Lca) For Sustainable Process Design, Roksana Mahmud

All Dissertations

For sustainable design, technology developers need to consider not only technical and economic aspects but also potential environmental impacts while developing new technologies. Techno-economic analysis (TEA) evaluates the technical performance and economic feasibility of a technology. Life cycle assessment (LCA) evaluates the potential environmental impacts associated with a product system throughout its life cycle from raw material extraction to disposal. Generally, TEA and LCA are performed separately for technology assessment. Understanding of the trade-off between economic and environmental performances is crucial for sustainable process design, which is not fully available if TEA and LCA is performed separately. In contrast, integration …

Do Single-Use Medical Devices Containing Biopolymers Reduce The Environmental Impacts Of Surgical Procedures Compared With Their Plastic Equivalents?, Scott R. Unger, Troy A. Hottle, Shakira R. Hobbs, Cassandra L. Thiel, Nicole Campion, Melissa M. Bilec, Amy E. Landis

Publications

Background: While petroleum-based plastics are extensively used in health care, recent developments in biopolymer manufacturing have created new opportunities for increased integration of biopolymers into medical products, devices and services. This study compared the environmental impacts of single-use disposable devices with increased biopolymer content versus typically manufactured devices in hysterectomy.

Methods: A comparative life cycle assessment of single-use disposable medical products containing plastic(s) versus the same single-use medical devices with biopolymers substituted for plastic(s) at Magee-Women’s Hospital (Magee) in Pittsburgh, PA and the products used in four types of hysterectomies that contained plastics potentially suitable for biopolymer substitution. Magee is …

Investigation Into Mechanisms And Mitigation Of Alkali-Silica Reaction In Sustainable Portland Cement Concrete Containing Recycled Glass Materials, Kaveh Afshinnia

All Dissertations

A significant portion of recycled glass from municipal waste streams is not found to be suitable for reuse as cullet in the production of new glass containers, and as a result it is disposed in landfills. One of the appropriate ways to reduce the disposal of waste glass in landfills is by using it in portland cement concrete as an aggregate material and/or supplementary cementitious material to replace portion of portland cement. The high silica content of the soda glass (approximately 70%) can potentially behave as a pozzolanic material when finely ground, which may enhance the mechanical and durability properties …

Modeling Sustainability In Renewable Energy Supply Chain Systems, Fei Xie

All Dissertations

This dissertation aims at modeling sustainability of renewable fuel supply chain systems against emerging challenges. In particular, the dissertation focuses on the biofuel supply chain system design, and manages to develop advanced modeling framework and corresponding solution methods in tackling challenges in sustaining biofuel supply chain systems. These challenges include: (1) to integrate 'environmental thinking' into the long-term biofuel supply chain planning; (2) to adopt multimodal transportation to mitigate seasonality in biofuel supply chain operations; (3) to provide strategies in hedging against uncertainty from conversion technology; and (4) to develop methodologies in long-term sequential planning of the biofuel supply chain …

Improvements In The Process Of Biohydrogen Production By Thermotoga Neapolitana, Louis Hill

All Theses

The production of biological hydrogen is an important process for the future of sustainability and alternative energies. Thermotoga neapolitana is a hyperthermophilic bacterium that produces H ₂ , CO₂ and acetate via fermentation. The goal of the research was to investigate the sustainable production of H₂ gas using waste agricultural feedstocks, recycled water and a simplified N₂ sparging method technique. A limited sparging method was developed which includes 1 minute of N₂ gas sparging of the reactor headspace and 90 minutes of idle reaction time for cysteine-HCl to react with dissolved oxygen prior to inoculation. This …

Durability Of Reinforced Concrete Incorporating Crushed Waste Brick As Coarse Aggregate, Matthew Adamson

All Theses

Using crushed bricks as aggregates in concrete is of particular interest to preserve natural aggregate sources as well as to reduce waste, as it has been estimated that 10% to 30% of all waste in landfills in the united States comes from construction and demolition wastes. By recycling some of these wastes, the sustainability of a project can be improved. However, it is important concrete incorporating these wastes is as durable or more durable then conventional concrete, or will it have a shorter service life. Durability of concrete is its ability to resist deterioration from its external environment such as …

Design Of Advanced Fouling-Resistant And Self-Cleaning Membranes For Treatment Of Oily And Impaired Waters, Daniel Wandera

All Dissertations

The overall goal of my Doctor of Philosophy (PhD) research was to design and develop advanced anti-fouling and self-cleaning membranes for treating impaired waters. Initial work focused on the development of membranes to treat produced water, which is oily wastewater that is co-produced during oil and gas exploration. Economical, environmentally sustainable treatment of the large volumes of produced water is a grand challenge for oil and gas companies. While membranes offer many advantages over more conventional treatment methods, membrane-based treatment processes for oily waters often fail due to membrane fouling. Therefore, the primary objective of my doctoral research was to …

Expert System Based Approach For Material Selection Of Automobile Body-In-White Structural Panels Using Numerical Ranking And Sustainability Indices, Ahmad Mayyas

All Dissertations

The goal of this work is to establish a set of quantifiable measures for design for sustainability (DFS) that can be applied to automotive applications in terms of environmental, social, economic and technical aspects. In this study, a comprehensive analysis was made in order to develop a methodology that can evaluate different body-in-white designs in terms of major sustainability aspects. Besides the complete life cycle analysis, environmental impacts and cost factors will be analyzed over vehicle's entire life-cycle (fuel extraction and refining, Pre-manufacturing, Manufacturing, Use, and
Post-use stages). The considered material options include: conventional steel, high strength steel, aluminum, magnesium, …

Identifying Barriers To Address During The Delivery Of Sustainable Building Renovation Projects, Corey Cattano

All Theses

Architects, engineers, and contractors are continuously searching for tools and methods to reduce the unique risks associated with the delivery of construction projects. Since national policies to reduce carbon emissions and energy consumption will require drastic improvements to the existing building stock, one specific area in need of such tools is the sustainable renovation of existing buildings. The purpose of this research is to identify the barriers to address during the delivery of sustainable renovation projects and offer solutions that overcome these barriers. For example, typical renovation projects do not coordinate energy retrofits with building system renovations, resulting in poor …

Energy And Nutrient Recovery From Anaerobic Treatment Of Organic Wastes, Christian-Dominik Henrich

All Dissertations

The objective of the research was to develop a complete systems design and predictive model framework of a series of linked processes capable of providing treatment of landfill leachate while simultaneously recovering nutrients and bioenergy from the waste inputs. This proposed process includes an 'Ammonia Recovery Process' (ARP) consisting of: 1) ammonia de-sorption requiring leachate pH adjustment with lime or sodium hydroxide addition followed by, 2) ammonia re-absorption into a 6-molar sulfuric acid spray-tower followed by, 3) biological activated sludge treatment of soluble organic residuals (BOD) followed by, 4) high-rate algal post-treatment and finally, 5) an optional anaerobic digestion process …

Comparing Problem-Based Learning And Lecture As Methods To Teach Whole-Systems Design To Engineering Students, Michael Dukes

All Theses

The objective of this research is to compare problem-based learning and lecture as methods to teach whole-systems design to engineering students. A case study, Appendix A, exemplifying successful whole-systems design was developed and written by the author in partnership with the Rocky Mountain Institute. Concepts to be tested were then determined, and a questionnaire was developed to test students' preconceptions. A control group of students was taught using traditional lecture methods, and a sample group of students was taught using problem-based learning methods. After several weeks, the students were given the same questionnaire as prior to the instruction, and the …