Engineering Commons^™

Code To Combustion: Cnc Rotor Replication Using Cam, Luis Luna

Publications and Research

In the current landscape, computer-aided design (CAD) and computer numerical control (CNC) technologies have greatly enhanced manufacturing processes, allowing rapid and high-precision production. This project will focus on recreating a Wankel engine rotor, using SolidWorks for design and Mastercam for Computer-Aided Manufacturing (CAM) simulations. The process begins with SolidWorks, which is used for a template of a high-precision rotor model. Mastercam is then utilized for the CAM programming, allowing for the creation of intricate tool paths and tool usage simulations. This approach is vital for complex objects like the Wankel engine rotor, which demands high precision. The primary objective of …

Exploring Methods For Recycling Filament Waste In 3d Printing, Max Rios Carballo

Publications and Research

The goal of the current study is to investigate cutting-edge techniques for recycling filament waste from 3D printing procedures. Appropriate waste management techniques are required to reduce this trash's harmful environmental consequences. The goal of the project is to look at new methods for recycling filament waste in order to minimize disposal and encourage reuse. To acquire data from pertinent papers and research, a thorough literature review methodology was used. The findings show that this issue may be resolved utilizing a variety of recycling techniques, including shredding, melting, and re-extrusion. The type of filament waste and the intended goal will …

Exploring Solidworks Simulation And Structural Analysis Tools To Predict Real-World Physical Behaviors, Itay Rubin

Publications and Research

Computer Aided Design (CAD) Software can optimize the product design process prior to manufacturing. This project examines engineering solutions using CAD software called SolidWorks. It simulates how the product will behave under a variety of engineering constraints. These simulations allow designers to optimize performance, cost, and speed efficiencies. The project uses simulations and finite element analysis to replicate real world behavior. It presents high-level capabilities in the design process, exposing new engineers to simulation tools that are available and relevant in mechanical engineering design. This project required independent research to obtain an advanced understanding of the software interface and capabilities.

Adhesively Bonded Multi-Material Single Lap Joints Under Static Tensile Loading, Yesim Kokner

Dissertations and Theses

Adhesive joints are widely used in a variety of industrial applications utilizing the improved mechanical properties they provide over traditional mechanical joining methods. [1] The lap joint is a usual test specimen with a view to assessing the strength and properties of joints.

This study deals with the stiffness, strength and fracture behavior of multi-material single-lap joints. It describes the mechanical behavior of a multi-material single lap joints subjected to static tensile loading in the longitudinal direction. First, steel-to-steel and aluminum-to-aluminum joints are tested to establish baseline data. Subsequently, multi-material joints consisting of aluminum-to-steel, aluminum-to-composite, and steel-to-composite joints were tested …

Workforce Development Strategies In Additive Manufacturing, Mel Cossette, Ismail Fidan, Gaffar Gailani, Angran Xiao

Publications and Research

Additive Manufacturing (AM), also known as 3D Printing (3DP), is one of the newest manufacturing technologies with growing utilization in our daily life. Parallel to this growth, new materials, machines, and specific processes are being developed to produce parts in better-finished quality, at lower cost, and with shorter production time. However, workforce education in this evolving field has not advanced at the same pace as the technology, lacking proven curriculums, high-quality/accredited degree programs, and specialized advanced degrees. In this paper, some best practices established by the authors are introduced. The list is far from exhaustive but is proven to be …

The Study Of 3d Micro-Fluid Printing In Aqueous Two-Phase System, Mian Huang

Dissertations and Theses

Aqueous two-phase system (ATPS) is a technology that allows phase separation in an aqueous environment. This technology can be used for the separation, extraction and purification of a variety of biomolecules and thus gained great attention in industry and academia. This thesis is a combination of ATPS, 3D printing, and microfluidics technologies and realizes the printing of biocompatible aqueous structures in another aqueous matrix. The objectives of this thesis include 1) customizing a regular thermal extrusion 3D printer for printing 3D aqueous structures, 2) printing 3D aqueous structure in an aqueous matrix, and 3) studying the stability of the printed …

Fly Ash Based Geopolymer For High Temperature And High Compressive Strength Applications In Aggressive Environment, Aaryan Manoj Nair, Akm S. Rahman

Publications and Research

Geopolymers are the results of geosynthetic reactions between aluminosilicates and strong bases. This results in chemical bonds between aluminum (Al), Silicon (Si)and oxygen (O) composing polymer rings in tetrahedral coordination. These bonds give them widespread useful applications such as high heat bearing ceramics, and base construction material whilst being far more environmentally conscious. The purpose of the experiment is to examine the effect of Silicon Carbide whisker and inorganic glass particles on thermal and mechanical properties of Geopolymers. This study will help understand the effect of various compositions and concentrations of SiO₂ in mechanical strength. In this experiment, the …

Static Analysis Of Circular Plates Under Mechanical Loads, Harpreet Lalia

Publications and Research

In this research statics analysis of circular plates is performed using SolidWorks.

Circular plates with different material properties, thickness to radius ratios, and boundary conditions under mechanical loads are modeled and analyzed in SolidWorks.

The results are obtained for deflections of circular plates under uniform and point loads.

A three-dimensional (3D) model of circular plates is first created in SolidWorks. Then the material properties, mechanical loads and boundary conditions are defined for the plate.

It is found deflection of plates is depended on magnitude of mechanical loads, geometrical parameters, boundary conditions and material properties. Responses of SolidWorks for deflections of …

Restore-L Satellite Servicing Internship Final Report, Giovanni Campos

Publications and Research

This paper reviews the Restore-L mission purpose and the necessary research and simulations to meet mission specification for the Propellant Transfer Subsystem (PTS). It is essential the PTS undergoes functionality testing, environmental testing, and calculations to understand the capabilities of the system. For the testing of components from PTS, a proper test setup is required. It is vital for test hardware, such as hoses and valves, to stay in place while the test is being performed. For the test hardware to operate correctly, positioning, orientation, and alignment are critical as well. In addition to the testing, calculations for pressure drop …

Coalescence-Induced Jumping Of Droplet: Inertia And Viscosity Effects, Samaneh Farokhirad, Jeffrey F. Morris, Taehun Lee

Publications and Research

The problem of coalescence-induced self-propelled jumping of droplet is studied using three-dimensional numerical simulation. The focus is on the effect of inertia and in particular the effect of air density on the behavior of the merged droplet during jumping. A lattice Boltzmann method is used for two identical, static micro-droplets coalescing on a homogeneous substrate with contact angle ranging from 0◦ to 180◦. The results reveal that the effect of air density is significant on detachment of the merged droplet from the substrate at the later stage of the jumping process; the larger the air density, the larger the jumping …

Morphology Of Brain Sulci Trabeculae And Its Effect On Brain During Impacts, Sharlin Anwar

Dissertations and Theses

Traumatic brain injury (TBI) is an intracranial injury caused by direct contact or non-contact head impacts to the brain. TBI is a major problem that accounts for high incidents of hospitalizations each year. Thus, it is important to understand and predict the occurrence of TBI in an impact. It has been shown that the subarachnoid space (SAS) trabeculae play an important role in damping the effect of an impact, thus reducing the injuries. However, the influence of sulci parameters and the sulci trabeculae in TBI due to impact is unexplored. Studies have shown that inclusion of sulci in brain models …