Engineering Commons^™

Model Block Press Design, Ben Todd Van Hamersveld, Chester Wong, Alexander Wing-Jon Giannousis

Mechanical Engineering

This project’s goal is to redesign the Center for Vocational Building Technology (CVBT) BP9 earth block press, which makes 1/3 scale compressed earth blocks to build demonstration model homes in Thailand. The full-scale block press, the BP6, provides a sustainable and affordable technique for constructing habitable homes in Thailand. The BP9 serves as a tool to inform the public of the advantages of human-powered earth block presses through demonstration. The BP9 press design has multiple problems: it is too expensive to manufacture, there is too much friction when used, it has several weak points due to users unintentionally applying excessive …

Means And Methods Of Residential Construction And Design In Remote Areas Of Southeast Alaska, Joseph Anthony Masters

Construction Management

Building in the remote locations of Southeast Alaska is currently an unexplored area of construction that has been avoided due to the complications that accompany such projects. Many property owners in the Southeast Alaska region face challenges due to a lack of common practices that would simplify the construction process, particularly those deprived of road access and utility services. These potential residents must rely on sustainable techniques and alternative modes of material transportation, creating an abundance of planning concerns. Additionally, while code restrictions are limited due to the uniqueness of these properties, certain codes regarding the Alaska Department of Natural …

Process Improvement And Lift Design For The Installation Of A Metrology Machine Assembly, Dalt J. Lasell, James Mitchell O'Meara, Matthew Steensma

Industrial and Manufacturing Engineering

The objective is to work with Onto Innovations, a leading provider of semiconductor metrology and manufacturing solutions, to develop a system that safely installs a 250lb optics plate into the Atlas III: one of their metrology machines. Based in Milpitas, CA, Onto Innovations utilizes a variety of operations to create different products and assembles each product on site. The 250lb optics plates are WIP that are transferred between fixtures and the Atlas III using a combination of lifts and human workers. The WIP have long lead times, high tolerances, and large costs associated with their manufacturing process.

Onto Innovations identified …

Automation Of Data Analysis In Formula 1, Adam Joseph Mourad, Prescott Jeanne Delzell, Patrick Conner Mccabe

Industrial and Manufacturing Engineering

This paper explores economic solutions for Formula 1 racing companies who are interested in data visualization tools. The research was conducted on the current development of data gathering, data visualization, and data interpretation in Formula 1 racing. It was found that a large chunk of racing companies within the league needs an affordable, effective, and automated visualization tool for data interpretation. As data collection in Formula 1 arises, the need for faster and more powerful software increases. Racing companies profit off-brand exposure and the more a racing team wins, the more exposure they receive. The goal of the paper focuses …

Reasoning From Point Clouds, Joey Wilson

Computer Engineering

Over the past two years, 3D object detection has been a major area of focus across industry and academia. This is primarily due to the difficulty of learning data from point clouds. While camera images are fixed size and can therefore be easily trained on using convolution, point clouds are unstructured series of points in three dimensions. Therefore, there is no fixed number of features, or a structure to run convolution on. Instead, researchers have developed many ways of attempting to learn from this data, however there is no clear consensus on what is the best method, as each has …

Mechanized Advent Calendar, Oma Skyrus, Sigrid Derickson, Tyler Koski, Daniel Clifton

Mechanical Engineering

Within this document, the “Naughty and Nice” team will describe the details associated with the completion of this project, which involves creating an animated advent calendar for the Cambria Christmas Market. The problem, the customers and stakeholders, and the general goals of the project are introduced. The team conducted background research; how this research helps in finding a solution or supporting the needs of the sponsor is illustrated. Initial research includes interviews with the sponsor and potential users, patent and existing product searches, and some technical research pertaining to the subject. The team found that there are not many existing …

Pv Mppt Water Pump Controller, Jacob R. Lamkin

Electrical Engineering

The intention of this project is to create a low cost way to extract the maximum useful power from a PV module to power a water pump. This approach will yield maximum financial and technical accessibility for end users. The project was successful in powering a water pump from a PV module as desired, and the microcontroller driven control circuitry was capable of finding and maintaining operation at the maximum power point of the PV module. Due to the low performance of the buck converter used in this project, this approach was not as efficient as desired and would require …

Free Space Optical Communication, Anuj Gohil

Electrical Engineering

Communication is key to day to day activities for all companies and people. Wireless communication has made us expect more from our tools. Radio Frequency has been the preferred medium for a couple decades, but there is a need for faster secure communication. Free Space Optical Communication is an alternate wireless communication system which uses optics to create a link. It utilizes low-power and converts an analog signal into digital pulses which are transmitted across space to a receiver. Its only caveat is its vulnerability under atmospheric obstacles. The goal of this project is to create a free space optical …

Blood Glucose Predictor, Jessica Patterson

Electrical Engineering

For my senior project, I perform data analysis using statistical methods to determine body metrics that correlate with blood glucose levels. Working with Dr. Tina Smilkstein, I take repeat measurements from 6 different volunteers to establish trends in bodily metric data. The data taken includes weight, body fat, pulse rate, VO2, blood glucose, blood pressure, hours slept, and quality of sleep. Using these values, I use the program MiniTab to view results.

A few examples of correlations with blood glucose found in this project are:

• Systolic blood pressure for females had a regression line of 124.0 -0.3366*Blood Pressure. This indicates …

Interdisciplinary Studio Pavilion [Isp] 2019, Rhett Turner

Construction Management

The Wine History Project of San Luis Obispo (the “WHP”) has been collecting and presenting viniculture artifacts from the last two centuries. With the need to display and maintain important artifacts comes the need for a structure that can fulfill such criteria. The purpose of this project was to design a pavilion that could entertain individuals while also displaying artifacts for the WHP. Additionally, the project’s design followed the recently trending method of integrated project delivery, which included the Architecture and Architectural Engineering departments. From the beginning, the design was influenced by its value propositions while still working within the …

Implementing Weekly Work Plan Lab Into Cm 214 - Residential Construction, David Maslan

Construction Management

A schedule is one of the primary components of any construction project and can determine the success of a job. Schedules most often contain high-level line items and lack the details it takes to actually implement daily work in the field. Subcontractors, as the specialists, understand the myriad of smaller tasks that a master schedule omits. It is the job of a superintendent to extract this information from subcontractors during pull plans, to build precise schedules, called weekly work plans (WWP). At Cal Poly it is expected that students receive a well-rounded curriculum in how to build various types of …

Implementing Ti Construction Into Cal Poly's Construction Management Curriculum, Ryan Donald Strong

Construction Management

No abstract provided.

Comparative Case Study: Understanding Why Clients Hire A 3rd Party Construction Manager, Brandon Ivan Perez

Construction Management

Many construction management students are unfamiliar with the project management for fee industry and the relationship between a construction manager and a project owner. Construction Management programs typically teach their students the variety of project delivery methods available to a client for their project. The Agency-CM project delivery method is not the most common project delivery method, and students have expressed interest in learning more about this side of the construction industry. This senior project will illustrate (3) different real-world projects where former clients chose to hire Cumming Corporation as an 3rd party construction manager and what factors drove them …

Interdisciplinary Studio Pavilion (Isp) 2019, Louis Joseph Rampone

Construction Management

The Interdisciplinary Studio Pavilion 2019 was designed for students the in the majors of architecture, architectural engineering, and construction management to be split into teams to design a pavilion for the Wine History Project. The 8 teams were tasked with designing a pavilion that was able to be easily transported, assembled, and disassembled for the purpose of being moved around to various locations within San Luis Obispo County. This was done by combining each team members individual skillset and knowledge to design the pavilion with these factors in mind.

Interdisciplinary Studio Pavilion 2019, Andrew Jacob Cumpian

Construction Management

The Wine History Project of San Luis Obispo is an organization aimed to preserve the wine making history of the Central Cost of California and share regional viticulture artifacts collected throughout the region. This interdisciplinary pavilion project required design exploration, form development, and constructability review execution to generate a design for a mobile wine-artifact pavilion that will be exhibited throughout the SLO county and beyond. Designing the mobile pavilion required coordination with both architects and architectural engineers to aid in the creation and design a pavilion that was not only visually appealing and functional, but also met the constructability requirements …

The Need For A Real Estate Development Capstone Course, Will Robert Kieckhefer

Construction Management

Cal Poly has extremely well-known programs in Construction Management, Business, Engineering, and Architecture. All of these programs have contributed multiple leaders to the building industry every year yet have neglected to integrate the different disciplines that overlap within the industry. The research the author has collected to support the need for a real estate development capstone course included in-person interviews, online research, personal experience, and team surveys. The research concluded the need for a real estate development capstone course that would integrate students from the school of Business, Architecture, and Construction Management. In order to build a successful project, all …

Hybrid Iii 95th Percentile Large Male Finite Element Model Neck Alteration, Eric Riley Day

Master's Theses

The motivation behind the project was to update the Livermore Software Technology Corporation (LSTC) Hybrid III 95th percentile finite element model, such that the neck assembly response under varying simulated loading conditions equals that of the federally regulated Hybrid III 95th percentile anthropomorphic testing device (ATD).

The family of Hybrid III crash test dummies approximate the physical properties and response of the human body in a frontal automotive crash. The Hybrid III is used to assess the effectiveness of vehicle restraint systems. LSTC offers Hybrid III finite element models for use in their Multiphysics simulation software package, LS-DYNA. The Hybrid …

A Comparison Of The Army Corps Of Engineers Hydrologic Modeling System And Autodesk Storm And Sanitary Analysis For Hydraulic And Hydrologic Analysis And Design, Foster Josef Heifetz Campbell

Master's Theses

Hydrological and hydraulic effects of urban development is one of the key issues of study for improved water management. The addition of impervious surfaces to once pervious land and re-routing open channels and flow paths can cause flooding or declining water levels within a watershed. Many studies of these issues have found that there can be multiple factors causing hydrological and hydraulic impacts, and it can be hard to analyze and develop effective solutions without appropriate drainage software packages. However, there are multiple software packages available for use, and determining the correct one to use for a specific challenge can …

Development Of An Analysis Tool And Weight Estimation Method For Aircraft Wing Structures, Kevin M. Barton

Master's Theses

The goal of this effort was to build an analysis tool for aircraft wings and incorporate it into a program that optimizes the wing structure for the lowest weight for the conceptual design phase. The analysis tool calculates the internal stresses in primary load carrying members using established analysis methods for semimonocoque beams. Via a Graphical User Interface (GUI) built in MATLAB, the user can define the structural layout and material properties of the load carrying members. The program requires a degenerate geometry model built with Vehicle Sketch Pad (OpenVSP) to define the outer mold line (OML) of the wing, …

Single-Cell Impedance Spectroscopy, David Paul Lange

Master's Theses

Impedance spectroscopy (IS) is an important tool for cell detection and characterization in medical and food safety applications. In this thesis, the Cal Poly Biofluidics Lab’s impedance spectroscopy system was re-evaluated and optimized for single-cell impedance spectroscopy. To evaluate the IS system, an impedance spectroscopy bioMEMS chip was fabricated in the Cal Poly Microfabcrication lab, software was developed to run IS experiments, and studies were run to validate the system. To explore IS optimization, Maxwell’s mixture theorem and the Schwartz-Christoffel transform were used to calculate an analytic impedance solution to the co-planar electrode system,a novel volume fraction to account for …

Navigational Feasibility Of Flyby / Impact Missions To Interstellar Objects, Declan Moore Mages

Master's Theses

In October 2017, the first interstellar object, designated 1I/2017 U1 and more commonly referred to as Oumuamua, was detected passing through our solar system by the Pan-STARRS telescope, followed recently by the detection of 2I/Borisov in August 2019. These detections came much sooner than thought possible, and have redefined our understanding of the population of interstellar objects. With the construction of the next generation of powerful observatories, future detections are estimated to occur as frequently as two per year, and while there is significant scientific understanding to be gained from observing these objects remotely, a spacecraft sent to intercept one …

Performance Enhancement And Characterization Of An Electromagnetic Railgun, Paul M. Gilles

Master's Theses

Collision with orbital debris poses a serious threat to spacecraft and astronauts. Hypervelocity impacts resulting from collisions mean that objects with a mass less than 1g can cause mission-ending damage to spacecraft. A means of shielding spacecraft against collisions is necessary. A means of testing candidate shielding methods for their efficacy in mitigating hypervelocity impacts is therefore also necessary. Cal Poly’s Electromagnetic Railgun was designed with the goal of creating a laboratory system capable of simulating hypervelocity (≥ 3 km/s) impacts. Due to several factors, the system was not previously capable of high-velocity (≥ 1 km/s) tests. A deficient projectile …

Dynamic Pressure Sensing For The Flight Test Data System, Marc Y. Goupil

Master's Theses

This thesis describes the design, assembly, and test of the FTDS-K, a new device in the Boundary Layer Data System (BLDS) family of flight data acquisition systems. The FTDS-K provides high-frequency, high-gain data acquisition capability for up to two pressure sensors and an additional three low-frequency pressure sensors. Development of the FTDS-K was separated into a core module, specialized analog subsystem, and practical testing of the FTDS-K in a flow measurement mission. The core module combines an nRF52840-based microcontroller module, switching regulator, microSD card, real-time clock, temperature sensor, and trio of pressure sensors to provide the same capabilities as previous-generation …

Stem And The Skilled Labor Shortage In The United States, Nicolo Tetsuo Hoshizaki

Construction Management

There is a growing shortage of skilled labor in the United States construction industry. As the baby boomer generation prepares to leave the workforce, this problem is getting exponentially worse. As Science, Technology, Engineering and Mathematics programs have become the U.S. Department of Education’s top priority, more young adults are pursuing higher education and entering the STEM workforce. Using quantitative and qualitative research methodologies, this paper provides an explanation as to why a logical method to assuage the labor shortage in construction is to employ vocational programs that prepare young adults to enter the industry similar to how STEM programs …

Cal Poly Construction Management Student’S Main Determinants For Potential Employment Opportunities: A Guide For Employers, David Joseph Van Buskirk Ii

Construction Management

California Polytechnic State University’s Construction Management department has an excellent reputation. This reputation, boosted by a 100% placement rate, attracts an abundant number of recruiters, a number that continues to grow every year. With the large number of recruiters coming to campus, students often find themselves in the fortunate situation of having multiple offers and having the opportunity to select amongst various companies. To be competitive, employers would best serve to cater their recruitment process to suit the needs of the students they are trying to hire. While plenty of research has been conducted to investigate and determine how recruiters …

Feasibility Of Reclaimed Lumber In Construction, Ernest Michael Banchero

Construction Management

As sustainable building becomes more and more prevalent in the construction industry, builders and homeowners are experimenting more with different kinds of building materials. The focus of this paper is on reclaimed wood. One can find reclaimed wood almost anywhere, in an old barn, lumber yards, basically any place that has valuable wood that is not being used. This wood is then taken to a mill and cleaned up. Imperfections are removed, nails are taken out, and any finish that will be used is applied. Reclaimed wood has grown in popularity in construction projects over the last few decades. The …

Increasing The Accessibility Of Bim Training Within The Aec Industry, Xavier Caldera

Construction Management

At the turn of the 21^st century, the rise of new technology has helped modernize the AEC industry. Architects, engineers, general contractors, and foremen can build, collaborate, and communicate more efficiently using BIM to help facilitate the building process. The benefits of BIM have been proven through increased coordination, risk mitigation, and cost optimization. However, with the increasing use of BIM, there is a growing education gap between construction workers and BIM technology. Currently, there are three main avenues to learn BIM: in-house company training, attending college, or paying to learn independently online. The foundation for a BIM learning …

Feasibility Of Collaborative Alliance Association For Non-Competitive Small Business Contractors, Brody Allen Gill

Construction Management

Small business construction contracting firms around the country struggle with growing their business successfully. This is a result of unknown results from new business practices and few resources to initiate programs that can improve productivity and efficiency. A simple solution could give small business construction contractors the opportunity to share ideas, compare company analytics and promote professional networking in a non-competitive, collaborative alliance. The goal of this project is to determine if a collaborative alliance association using data benchmarking would be an effective solution for non-competitive small business contractors to grow their businesses. Thereafter being proven effective, is such an …

Shell House Demo, Cameron Tilmont

Construction Management

The Shell House demo was recommended by the Associate Dean of CAED as a potential senior project for students. Built decades ago it had deteriorated over time. The purpose of this project was to clean up Poly Canyon Architecture Graveyard, making it a nice, safe place to visit. This project interested the author because it was something different and was geared more towards heavy civil.

To get started, a permit had to be submitted to the CAL POLY building department. This process took longer than expected. The permit wasn’t released until an environmental impact test was conducted, resulting in asbestos …

Interdisciplinary Student Competition For California Polytechnic State University - San Luis Obispo, Forest G. Gobble

Construction Management

Cal Poly has a reputation for producing some of the best qualified graduates in their respective fields of study. While this is very important, curricular activities involving collaboration between students within the same college are limited (excluding same major). Beyond that, collaboration opportunities across colleges are even more rare. When graduates enter the workforce, many are thrust into highly collaborative environments across various disciplines. Industry professionals have shown a strong desire for young people who have had exposure to realistic problems and experience working with other professions outside of their own field of expertise. The question needing answering is, would …