Engineering Commons^™

Low-Cost Uav Swarm For Real-Time Object Detection Applications, Joel Valdovinos Miranda

Master's Theses

With unmanned aerial vehicles (UAVs), also known as drones, becoming readily available and affordable, applications for these devices have grown immensely. One type of application is the use of drones to fly over large areas and detect desired entities. For example, a swarm of drones could detect marine creatures near the surface of the ocean and provide users the location and type of animal found. However, even with the reduction in cost of drone technology, such applications result costly due to the use of custom hardware with built-in advanced capabilities. Therefore, the focus of this thesis is to compile an …

Conceptual Design Of A South Pole Carrier Pigeon Uav, Kendrick M. Dlima

Master's Theses

Currently, the South Pole has a large data problem. It is estimated that 1.2 TB of data is being produced every day, but less than 500 GB of that data is being uploaded via aging satellites to researchers in other parts of the world. This requires those at the South Pole to analyze the data and carefully select the parts to send, possibly missing out on vital scientific information. The South Pole Carrier Pigeon will look to bridge this data gap.

The Carrier Pigeon will be a small unmanned aerial vehicle that will carry a 30 TB solid-state hard drive …

Development Of A Tailored Flight Test Approach For Small Unmanned Aircraft Systems, Neil A. Wolfe

Master's Theses

This document contains the details of a study conducted to determine an effective performance flight test approach specifically for small Unmanned Aircraft Systems (sUAS). This was done by taking proven procedures and documentation from the FAA and the Air Force for manned aircraft and tailoring them specifically for use with sUAS flight test programs. A ‘sUAS Flight Testing Handbook’ was created from the proceedings to aid commercial organizations and recreational developers conducting sUAS research without access to flight test experience. A performance flight test program was conducted with the AeroVironment RQ-20 Puma sUAS using the developed approach to verify that …

Design Methods For Remotely Powered Unmanned Aerial Vehicles, William Beaman Howe

Master's Theses

A method for sizing remotely powered unmanned aerial vehicles is presented to augment the conventional design process. This method allows for unconventionally powered aircraft to become options in trade studies during the initial design phase. A design matrix is created that shows where, and if, a remotely powered vehicle fits within the design space. For given range and power requirements, the design matrix uses historical data to determine whether an internal combustion or electrical system would be most appropriate. Trends in the historical data show that the break in the design space between the two systems is around 30 miles …

Flight Testing Small Uavs For Aerodynamic Parameter Estimation, Adam Thomas Chase

Master's Theses

A flight data acquisition system was developed to aid unmanned vehicle designers in verifying the vehicle's design performance. The system is reconfigurable and allows the designer to choose the correct combination of complexity, risk, and cost for a given flight test. The designer can also reconfigure the system to meet packaging and integration requirements. System functionality, repeatbility, and accuracy was validated by collecting data during multiple flights of a radio-controlled aircraft. Future work includes sensor fusion, thrust prediction methods, stability and control derivative estimation, and growing Cal Poly's small-scale component aerodynamic database.

Design, Fabrication And Test Of An Operationally Responsive Aircraft With Niirs Evaluated Imager, Colin Burt

Master's Theses

Unmanned Aerial Systems (UAS) are a growing asset. Currently UAS are on the cutting edge with resources being spent developing the capabilities mostly for military use. This project is intended to create a system for non-defense customers. Specifically, the Operationally Responsive Aircraft (ORA) will appeal to academic institutions, individual consumers, future customers new to the UAS industry, as well as anybody trying to get airtime for custom sensors.

The system developed in this project utilizes dual aluminum external payload bays attached to a ParkZone Radian aircraft. Each external payload bay can contain approximately 500 $\text{cm}^3$, with a height and width …

Uav Formation Flight Utilizing A Low Cost, Open Source Configuration, Christian W. Lopez

Master's Theses

The control of multiple unmanned aerial vehicles (UAVs) in a swarm or cooperative team scenario has been a topic of great interest for well over a decade, growing steadily with the advancements in UAV technologies. In the academic community, a majority of the studies conducted rely on simulation to test developed control strategies, with only a few institutions known to have nurtured the infrastructure required to propel multiple UAV control studies beyond simulation and into experimental testing. With the Cal Poly UAV FLOC Project, such an infrastructure was created, paving the way for future experimentation with multiple UAV control systems. …

Flying Qualities Built-In-Test For Unmanned Aerial Systems, Alton Pak-Hin Chiu

Master's Theses

This paper presents a flying qualities built-in-test for UAS application with the scope limited to the longitudinal axis. A doublet input waveform excites the AV and both α and q are used by EUDKF to estimate the A and B matrices which are short period approximations of the system. ζ, ω, GM, PM, observability, and controllability are calculated to determine flying qualities with the results displayed to the AVO in a color-coded, easy to interpret display.

While SID algorithms have been flying in vehicles with adaptive control schemes, vehicles with other schemes (such as classical feedback) lack this built-in self …

Nonlinear Uav Flight Control Using Command Filtered Backstepping, Brian M. Borra

Master's Theses

The aim of this effort is to implement a nonlinear flight control architecture, specifically flight path control via command filtered backstepping, for use in AME UAS's Fury® 1500 unmanned flying wing aircraft. Backstepping is a recursive, control-effort minimizing, constructive design procedure that interlaces the choice of a Lyapunov function with the design of feedback control. It allows the use of certain plant states to act as intermediate, virtual controls, for others breaking complex high order systems into a sequence of simpler lower-order design tasks.

Work herein is a simplified implementation based on publications by Farrell, Sharma, and Polycarpou. Online approximation …

Development Of A Small And Inexpensive Terrain Avoidance System For An Unmanned Aerial Vehicle Via Potential Function Guidance Algorithm, Shane Alan Wallace

Master's Theses

Despite the first unmanned aerial vehicle (UAV) mission being flown on Aug 22 1849 to bomb Venice UAVs have only recently began to modernize into sophisticated tools beyond simple aerial vehicles. With an increasing number of potential applications, such as cargo delivery, communications, search and rescue, law enforcement, and homeland security, the need for appropriate UAV technology advancement also arose. Here, the development of a low-cost collision avoidance system is described. Hardware was tested and selected based on predetermined constraints and goals. Additionally, a variety of potential functions were explored and assessed at their effectiveness in preventing a collision of …

Modular Laser Combat System For Remotely Operated Vehicles: Bridging The Gap Between Computer Simulation And Live Fire, Thomas Edward Fulenwider

Master's Theses

In the emerging industry of small unmanned vehicles, pioneered by small businesses and research institutions, a suitable combat system test platform is needed. Computer simulations are useful, but do not provide the definitive proof of effective operation necessary for deployment of a combat system. What is needed is an affordable simulated weapons system that enables live flight testing without the used of live weaponry.

A framework is developed here for the construction of a simulated weapon using Free Space Optical (FSO) infrared communication. It is developed in such a way to ensure compatibility with a variety of platforms including ground …

Multidisciplinary Design Optimization Of An Extreme Aspect Ratio Hale Uav, Bryan J. Morrisey

Master's Theses

ABSTRACT

Multidisciplinary Design Optimization of an Extreme Aspect Ratio HALE UAV

Bryan J. Morrisey

Development of High Altitude Long Endurance (HALE) aircraft systems is part of a vision for a low cost communications/surveillance capability. Applications of a multi payload aircraft operating for extended periods at stratospheric altitudes span military and civil genres and support battlefield operations, communications, atmospheric or agricultural monitoring, surveillance, and other disciplines that may currently require satellite-based infrastructure. Presently, several development efforts are underway in this field, including a project sponsored by DARPA that aims at producing an aircraft that can sustain flight for multiple years and …

Application Of Parent-Child Uav Tasking For Wildfire Detection And Response, Stephen T. Kubik

Master's Theses

In recent years, unmanned aerial vehicles (UAVs) have become a dominant force in the aerospace industry. Recent technological developments have moved these aircraft from remote operation roles to more active response missions. Of particular interest is the possibility of applying UAVs toward solving complex problems in long-endurance missions. Under that belief, the feasibility of utilizing UAVs for wildfire detection and response was investigated in a partnership that included NASA’s Aeronautics Research Mission Directorate and Science Mission Directorate, and the United States Forest Service. Under NASA’s Intelligent Mission Management (IMM) project, research was conducted to develop a mission architecture that would …