Engineering Commons^™

Evaluation Of Polyvinyl Alcohol (Pva) For Electrospinning Utility In The Blood Vessel Mimic (Bvm) Lab, Logan Vandenbroucke

Master's Theses

Electrospinning has provided the opportunity to create extracellular matrix (ECM) mimicking scaffolds for the development of tissue-engineered constructs. Within Professor Kristen Cardinal’s Blood Vessel Mimic (BVM) Lab, at Cal Poly, there exists a constant demand for innovation and the expansion of polymer types and electrospinning capabilities for its BVM model. Along these lines, the BVM Lab has recently acquired two new electrospinning systems: the Spinbox, a commercially graded electrospinning system, and the Learn-By-Doing system, which was part of a recently completed thesis conducted by Jason Provol. Additionally, recently published literature has demonstrated polyvinyl alcohol (PVA) as a viable option for …

Effects Of Beet Supplements On Cardiovascular Response Using A Noninvasive Blood Pressure Cuff, Nicholas M. Hughes

Master's Theses

A Calibrated Cuff Plethysmography device was built, tested for verification, and used to experiment on human subjects to measure the cardiovascular response of consuming a beet supplement, specifically looking at arterial compliance and pressure-area curves. Each subject was tested four times. A baseline was measured under normal conditions and after five-minute hyperemia conditions. 10 subjects were given 6 ounces of water mixed with either purple Kool-Aid (control), a SuperBeets supplement, or a SuperBeets Sport supplement and after 45 minutes, measurements were taken undergoing normal and hyperemia conditions once more. The verification testing demonstrated the calibration of the device was effectively …

The Tidal Prism, Viable Eelgrass Habitat, And The Effects Of Sea Level Rise In Morro Bay, Kaden A. Caliendo

Master's Theses

The tidal prism, or the volume of water exchanged from the sea to an estuary from mean low to mean high tide, influences system hydrodynamics and ecological functioning. Since 1884, the tidal prism in Morro Bay, California has been estimated to be decreasing over time due to sedimentation from upstream practices. What is the current tidal prism in Morro Bay and how will that change with sea level rise? How will eelgrass respond to rising sea levels?

For this study, inexpensive tidal gauges were deployed at four locations in Morro Bay from March to August 2023 to measure spatially varying …

Decentralized Machine Learning On Blockchain: Developing A Federated Learning Based System, Nikhil Sridhar

Master's Theses

Traditional Machine Learning (ML) methods usually rely on a central server to per-
form ML tasks. However, these methods have problems like security risks, data
storage issues, and high computational demands. Federated Learning (FL), on the
other hand, spreads out the ML process. It trains models on local devices and then
combines them centrally. While FL improves computing and customization, it still
faces the same challenges as centralized ML in security and data storage.

This thesis introduces a new approach combining Federated Learning and Decen-
tralized Machine Learning (DML), which operates on an Ethereum Virtual Machine
(EVM) compatible blockchain. The …

Parametric Optimization Of A Wing-Fuselage System Using A Vorticity-Based Panel Solver, Chino Cruz

Master's Theses

Aerodynamic topology optimization is a useful tool in the aerodynamic design pro-
cess, especially when looking for marginal gains within a design. One example is
a turboprop racer concept aircraft that is designed with the goal of breaking world
speed records. An optimization framework was developed with the intention of later
being applied to this design. In the early design stages, the optimization framework
must focus on quicker methods of drag estimation, such as a panel codes. The large
number of design variables in topology optimization can exponentially increase func-
tion evaluations and thus computational cost. A vorticity-based panel solver …

Launch Vibration Attenuation For In-Space Assembly Cargo, Jered Bell

Master's Theses

This thesis investigates the implementation of a passive isolator with a pressurized air cushion for spacecraft payloads in mission architectures implementing in-space assembly technologies. A pressurized air bed capable of briefly surviving the space environment for cargo delivery was prototyped and experimentally evaluated for launch vehicle vibration dynamics resulting in a 72%, 93%, and 88% reduction in experienced GRMS loads for the X-Axis, Y-Axis, and Z-Axis, respectively. A preliminary Total Mass Loss evaluation of the Low-Density Polyethylene Film utilized for the air bed resulted in a mass loss of 0.7%, indicating that commercial off-the-shelf films might require minimal modification for …

Development Of Load Measurement Technique For Arbitrary Shapes, Quintin J. Cockrell

Master's Theses

Obtaining aerodynamic forces and moments about all three orthogonal axes for arbitrary shapes at arbitrary orientations in a fast manner via a measurement technique specific to Cal Poly’s low-speed wind tunnel to continually obtain the forces and moments under quasi-steady conditions is explored. A Continuous Rotation Technique (CR) uses a 6-DOF load cell and stepper motor to rotate an object about an axis for a complete rotation. The forces and moments acting upon the object pass through the stepper motor and interface plates and recorded by the load cell as the object is rotated continuously a finite number of rotations. …

Discourse Analysis In Engineering: Investigating Patterns In Brainstorming Conversations, Aimee Chiem

Master's Theses

Brainstorming is a critical part of the engineering design process and can have a significant impact on the outcomes of the overall project. While research has studied the outcomes of brainstorming and the ideas that teams generate, the role that language and conversation play in these activities is still relatively underexplored. Observing the different ways people use specific types of discourse can reveal how conversations can affect brainstorming itself. To that end, this research aims to answer the following questions:

1) What are the different kinds of discursive moves that students make during engineering brainstorming activities?

2) What patterns or …

Improvement Of Rotation Capacity Of Composite Beam-To-Hss Column Connections Using External Horizontal Stiffeners, Mahdi Afshar Arjmand

Master's Theses

Improvement of Rotation Capacity of Composite Beam-to-HSS Column Connections Using External Horizontal Stiffeners

Mahdi Afshar Arjmand

This thesis focuses on the analysis of out-of-plane deformation (OOP) in column flange located in the panel zone of composite beam-to-column steel connection, as a critical aspect of steel structural engineering. This type of connection is an integral component of steel structures, and understanding their behavior is essential for ensuring safety and performance. The investigation involves examining the causes, factors influencing, and potential mitigation strategies for out-of-plane deformation of HSS flange column in these connections. Beam-to-column connections play a vital role in transferring loads …

Fabrication Of Alumina Membranes From Uv Resin– Alumina Particle Slurries, Dominique Henry Porcincula

Master's Theses

Ceramics membranes are made in a wide variety of different techniques using a wide variety of different materials. However, many of the common techniques utilize a slurry of ceramic particles, additives, and either organic solvent or water that is shaped into a membrane, left to dry, and then sintered together. Drying is a time consuming process, often requiring several hours for the liquid medium to evaporate. Defect formation caused by development of partial pressures across the drying membrane, including cracks and warpage, also typically occurs during the drying process. To address this, slurries of ceramic particles made with a low …

Brunet: Disruption-Tolerant Tcp And Decentralized Wi-Fi For Small Systems Of Vehicles, Nicholas Brunet

Master's Theses

Reliable wireless communication is essential for small systems of vehicles. However, for small-scale robotics projects where communication is not the primary goal, programmers frequently choose to use TCP with Wi-Fi because of their familiarity with the sockets API and the widespread availability of Wi-Fi hardware. However, neither of these technologies are suitable in their default configurations for highly mobile vehicles that experience frequent, extended disruptions. BRUNET (BRUNET Really Useful NETwork) provides a two-tier software solution that enhances the communication capabilities for Linux-based systems. An ad-hoc Wi-Fi network permits decentralized peer-to-peer and multi-hop connectivity without the need for dedicated network infrastructure. …

A Numerical Modeling Analysis Of The San Francisco Bay And Sacramento-San Joaquin Delta: Riverine, Tidal, And Wind Processes, Drake A. Abrahamsson

Master's Theses

The primary motivation of this study is to analyze the 1D-2DH hydrodynamic model of the San Francisco Bay and Sacramento-San Joaquin Delta (SFBD) outlined in Nederhoff et al. (2021). I compared model water level data to 70 tidal records from the National Oceanic and Atmospheric Association (NOAA), the United States Geological Survey (USGS), the California Data Exchange Center (CDEC), and from local municipalities throughout the Bay Area to investigate how the model captures water levels and tidal constituent amplitudes. While the Nederhoff et al (2017) model analyzed an extended time period from 1950-2019, I analyzed M2 amplitude and tidal water …

Deep Ocean Vehicle Applications And Modifications, Nichole "Nikki" T. Arm

Master's Theses

This project had two primary goals: (1) to explore opportunities to further a deep-ocean vehicle’s reach using alternative pressure spheres, and (2) to implement an existing deep-ocean vehicle (lander) in active scientific research.

I gained a greater understanding of the limitations and design choices made for existing pressure spheres using Finite Element Analysis (FEA). My simplified FEA model predicted sphere failure for the existing 30% Fiber Glass 70% Nylon injection molded spheres at an external pressure of 3,954psi or 2,690m ocean-depth (only a 7.38% error compared to the tested minimum failure depth), so I determined it a valid model. I …

An Analysis On Wildfire Mitigations Employed By Utilities In California, Evan Luu

Master's Theses

As climate change continues to worsen, environmental effects are felt by many people around the world. In California, some of its most damaging wildfires have been found to be started by utilities. As the state continues to suffer from worsening wildfire conditions, the utilities need to implement a variety of wildfire mitigations to help reduce the risk of wildfires that can affect the state and its residents. This paper analyzes the effectiveness of four mitigations employed across three California utilities and suggests potential ways for the mitigations to be used together. The technologies evaluated are covered conductor, rapid earth fault …

Novel Method Of The Quantification Of Turbulent Fluid Flow In Silicone Artery Phantoms Using Acoustic Analysis, Julia Wong

Master's Theses

Cardiovascular disease is the leading cause of death globally and is responsible for taking 17.9 million lives per year. Despite the use of clinical treatments and detection methods, there remains a large population of individuals that suffer from CVD whose symptoms are left undetected and untreated prior to a life-threatening cardiac event. This highlights a need for an early detection method that can prevent the manifestation and worsening of the disease as well as address limitations of current early detection methods. An area of interest for early detection of CVD is subclinical atherosclerosis, which is the long, early, asymptomatic stage …

Development Of An Angiogenic Tissue-On-A-Chip Microenvironment, Eric Stuehr

Master's Theses

Preclinical testing is necessary to investigate the safety and efficacy of novel therapeutics before moving to clinical trials, yet approximately 90% of these therapies fail once tested in humans. This has led to increased interest in developing robust preclinical models that accurately mimic the complex human in vivo physiology. Microfluidic devices that can introduce dynamic conditions to 3D cell/organoid cultures, also known as tissue-on-a-chip, have emerged as physiologically relevant in vitro preclinical models that can achieve high throughput screening of therapeutics. The research presented here aimed to develop an angiogenic environment within a novel microfluidic device to stimulate formation of …

Smartphone Based Object Detection For Shark Spotting, Darrick W. Oliver

Master's Theses

Given concern over shark attacks in coastal regions, the recent use of unmanned aerial vehicles (UAVs), or drones, has increased to ensure the safety of beachgoers. However, much of city officials' process remains manual, with drone operation and review of footage still playing a significant role. In pursuit of a more automated solution, researchers have turned to the usage of neural networks to perform detection of sharks and other marine life. For on-device solutions, this has historically required assembling individual hardware components to form an embedded system to utilize the machine learning model. This means that the camera, neural processing …

Design And Scale Model Of Wave Generator For The Testing Of Wave Energy Conversion Devices, Amanda Olla

Master's Theses

As the climate crisis draws more concern, research and development in wave energy as a renewable energy source has increased. Devices such as wave energy converters (WECs) are being researched, tested, and implemented to make wave energy a competitive power source. Testing of these devices is limited due to environmental concerns such as weather, location, and other issues. WECs require testing in a marine environment, however, performing testing in the actual environment may be difficult due to weather, access, mounting, and other issues. To eliminate environmental unknowns from testing, a wave simulator device can mimic wave behavior without the need …

Using Noninvasive Calibrated Cuff Plethysmography To Observe The Effects Of Cold-Water Immersion On Arterial Compliance, Rita M. Grigorian

Master's Theses

As the prevalence of cardiovascular diseases continues to exponentially grow in populations across the globe, the necessity of determining underlying factors, effective methods of diagnoses, and universally available preventive measures also grows. Early detection of endothelial dysfunction, a proven precursor of cardiovascular diseases, can be extremely impactful in encouraging preventative measures and early intervention before medical conditions become chronic. In recent years, ice plunging, a form of cryotherapy involving full body immersion in cold water, has gained popularity within circles of fitness and health practitioners, gaining the interest of people of all backgrounds. Certain parallels observed between the human physiological …

Analysis Of Gait Parameters And Knee Angles In Ultimate Frisbee Players: Implications For Balance And Injury, Ethan Nikcevich

Master's Theses

Biomechanics research investigating gait and balance of ultimate frisbee players is an unexplored topic. Ultimate requires a wide range of motions that could improve balance and is also a sport prone to frequent injury. This study explores the impact of playing ultimate on gait parameters associated with balance and knee angles associated with joint injury. Gait trials were conducted on 8 ultimate players and 8 control participants between the ages of 18 and 23 to obtain total double support time, stance phase time, single support time, load response time, abduction-adduction (AA) angles, internal-external (IE) rotation angles, and flexion angles of …

Co-Simulation Of Active Magnetic Bearing Rotors Using Adams, Msc Apex, And Simulink, Shea A. Charkowsky

Master's Theses

Apex-Adams-Simulink co-simulation is applied to active magnetic bearing (AMB) rotors, demonstrating results unshown in literature, including continuous frequency response, and unavailable in known rotor dynamics software, including touchdown bearing impact. AMBs levitate rotors without contact, so they involve no friction, wear, lubrication, pollution, or shaft speed limits and are thus valuable for large, high-speed applications. Modeling of such rotors, necessary for safety and performance, simultaneously requires flexible body dynamics and advanced control design, but simulation programs tend to specialize in only one or the other. The co-simulation method combines multiple such programs—MSC Apex (finite element modeling), Adams (multibody dynamics), and …

Subject-Specific Human Knee Fea Models For Transtibial Amputees Vs Control Tibial Cartilage Pressure In Gait, Cycling And Elliptical Training, Ali Yazdkhasti

Master's Theses

Millions of individuals around the globe are impacted by osteoarthritis, which is the prevailing type of arthritis. This condition arises as a result of gradual deterioration of the protective cartilage that safeguards the ends of the bones. This is especially true of transtibial amputees, who have a significantly higher incidence of osteoarthritis of the knee in their intact limb than non-amputees. Engaging in regular physical activity, managing weight effectively, and undergoing specific treatments can potentially slow down the advancement of the disease and enhance pain relief and joint function. Nevertheless, the relationship between the type of exercise and its impact …

Theoretical And Experimental Study Of Active Magnetic Bearing Control Integrated On Bently's Rotor Kit, Arturo Mario Flores

Master's Theses

This thesis focuses on the comprehensive study of controlling a customized Active Magnetic Bearing (AMB) installed on Bently Nevada’s RK4 rotor kit in Cal Poly’s Vibrations and Rotordynamics Lab. The AMB was uniquely designed and manufactured by a Cal Poly senior project team to fit Bently’s rotor kit and the results of this research are distinctive to the custom system. To achieve practical functionality of the AMB system, we designed a controller a Virtual Instrument (VI) using the National Instrument software, LabVIEW. From the experimental study, we calibrated the programming to find unknown parameters of the AMB system and validated …

Static Vascular Modeling Of Diabetes Progression, Andrea Skattenborg

Master's Theses

Cardiovascular disease is the leading cause of mortality in diabetic patients, and diabetes is one of the main causes of cardiovascular disease. Risk factors for cardiovascular disease result in structural and functional changes in the vascular wall. Arterial stiffness is a prominent structural change observed in the arterial wall that can be measured in clinical settings. The purpose of this thesis was to create a static model of the changes in arterial stiffness seen in diabetes. Elastic tubes with varying wall thicknesses were used to create artificial arteries for this purpose. Compliance (inverse of stiffness) of the arteries was determined …

Analysis Of Arterial Compliance Using A Surrogate Arm Bench Top Model For The Validation Of Oscillometric Blood Pressure Methods, Christopher J. Cunningham

Master's Theses

A study was performed on a recently developed prototype of the Yong-Geddes surrogate arm design to collect compliance data of the various system components and determine the accuracy of measurements made through the bench top model. The study was performed to perceive the effectiveness of the model as a tool for validating non-invasive blood pressure detection monitors. Three stages of testing were performed to gather pressure and volume data from an artificial artery component, a sphygmomanometer, and the surrogate arm system to produce compliance estimations. Mathematical equations from supported arterial hemodynamics studies and clinical trials were applied to the pressure …

Design Of Class F-Based Doherty Power Amplifier For S-Band Applications, Kyle Chang

Master's Theses

Modern RF and millimeter-wave communication links call for high-efficiency front end systems with high output power and high linearity to meet minimum transmission requirements. Advanced modulation techniques, such as orthogonal frequency-division multiplexing (OFDM) require a large power amplifier (PA) dynamic range due to the high peak-to-average power ratio (PAPR). This thesis provides the analysis, design, and experimental verification of a high-efficiency, high-linearity S-band Doherty power amplifier (DPA) based on the Class F PA. Traditional Class F PAs use harmonically tuned output matching networks to obtain up to 88.4% power-added efficiency (PAE) theoretically, however the amplifier experiences poor linearity performance due …

Development Of A Low-Cost Acoustic Gauge For Simultaneous Tide And Wave Measurement, Alexander Kalman Dunn

Master's Theses

High-quality tide and wave data are essential in a variety of fields including coastal engineering, climate science, disaster response, and recreational activities. Accurate data are publicly accessible from government organizations such as the National Oceanic and Atmospheric Administration (NOAA), however the high costs associated with deploying and maintaining their high accuracy gauges results in a deficit of localized data. Commercial gauges available starting at $2,000 are still expensive for local agencies and individual users to deploy and maintain. These commercial options can also be limited in their scope, accuracy, or ease of use. In this thesis, a low-cost acoustic gauge …

Class F Power Amplifier And Doherty Power Amplifier Design, Shreyansh Suman

Master's Theses

The main goal of this thesis is to design and fabricate a power amplifier suitable for entry in IMS 2023 High Efficiency Power Amplifier Student Design Competition. Power amplifier design requires multiple design tradeoffs, for example, efficiency and linearity are the two main conflicting design parameters that require careful tradeoff to ensure optimum performance. Two prototypes are designed and fabricated for the competition: Class F operating at 1.5 GHz and Doherty Power Amplifier designed for an operating frequency of 3 GHz. Both prototypes meet the minimum requirement for qualifying in the IMS 2023 HEPA SDC. Class F power amplifier designed …

Statistical Uncertainty Of The Ignition Time, Burning Rate, And Extinction Characteristics Of Engineered Timber Products, Jacob David

Master's Theses

The characterization of flammability parameters such as time to ignition, mass loss rate (MLR), and extinction criteria is critical for understanding ignition and burning behavior of timber products. These parameters, often determined with bench scale experiments, have previously been presented in literature. However, standard test methods generally use relatively low trial quantities (e.g., n=3) which can potentially cause large variation in reported values. This study investigates the influence of trial quantity on observed statistical variation in key flammability metrics for timber products (e.g., ignition time, peak MLR, MLR at extinction). Using a conical heater, 100 repeat trials were conducted …

Contextually Dynamic Quest Generation Using In-Session Player Information In Mmorpg, Shangwei Lin

Master's Theses

Massively multiplayer online role-playing games (MMORPGs) are one of the most

popular genres in video games that combine massively multiplayer online genres with

role-playing gameplay. MMORPGs’ featured social interaction and forms of level pro-

gression through quest completion are the core for gaining players’ attention. Varied

and challenging quests play an essential part in retaining that attention. However,

well-crafted content takes much longer to develop with human efforts than it does to

consume, and the dominant procedural content generation models for quests suffer

from the drawback of being incompatible with dynamic world changes and the feeling

of repetition over time. …