Engineering Commons^™

Tagalong Trail, Sean Wahl, Jason Davis, Quinlan Stephens, Ryan Johnson, Vinh Vo

Mechanical Engineering

The Cal Poly mechanical engineering team working on the Path of Lights and Sounds for the Girl Scouts of California’s Central Coast has now completed their project. In the last quarter of their project, they were able to finalize their tile’s structural design while iterating through several electronics board designs. Through this iteration, they were able to create a final electronics board and designed a water-resistant enclosure to house the board. A new team member was added, allowing them to manufacture 28 tile structures and 30 electronics assemblies over the course of two and a half weeks. This proved to …

Cnc Retrofits, Fabian Samano, Murat Askin, Daniel Lonczak, Zane Campise

Mechanical Engineering

The Boxford CNC Lathe is a machine used for educational purposes. The goal of the CNC Retrofits project is to improve the Boxford MT2’s performance and functionality to enable Mr. Lonczak to manufacture customized ballpoint pens. Within this Final Design Review (FDR) document, we present design updates since the CDR and implementation/assembly techniques. This work culminates in a solution to Mr. Lonczak’s needs which is analyzed in three subsystems: main control, spindle position tracking, and user interface. Within this report, we show the results of each subsystem’s verification process. These results prove that the design concept was met by describing …

Integrated Actuator, David Hefter, Mathew Smith, Amanda Westmoreland, Akanksha Maddi

Mechanical Engineering

This Final Design Review document outlines the senior project design that we, a team of four mechanical engineering students at California Polytechnic State University, are developing for Charlie Refvem, a lecturer in the mechanical engineering department. The final design has undergone significant modifications since the Critical Design Review, such as a redesigned vertical shaft, material changes, and the incorporation of belt tensioners. These redesigns are thoroughly discussed in the context of testing and assembly error resolution.

The document outlines the detailed steps for the production and testing of the design verification prototype. This includes the procurement and manufacturing of components, …

Northrop Grumman Collaboration Project, Nikkia Psomas-Sheridan, Santiago Robles, Ben Elkayam, Benjamin Ulfhake

Mechanical Engineering

The Northrop Grumman Collaboration Project (NGCP) is a collaborative club project sponsored by Northrop Grumman for the students of Cal Poly San Luis Obispo (CPSLO) and Cal Poly Pomona (CPP) to create a fleet of vehicles to aid in the simulated rescue of stranded hiker. The CPSLO club is responsible for delivering an autonomous flight vehicle that can suppress a fire and retrieve a payload. Mechanical Design Team of the CPSLO team was responsible for the design of the frame, electronics housing, and payload and fire suppression systems.

Rapid Composter, Shannon Shinozaki, Avin Atencio, Jonathan Fraser, Lukas Kolbl, Russell Occhipinti

Mechanical Engineering

This project was created with the intent of automatically composting equine bio waste to be reused as plant fertilizer. The system consists of four subsystems: power generation and storage, automatic controls, aeration, and structure. Each subsystem may be manufactured independently, then put together. This system will not have access to power outlets, so it was designed to be solar-powered.

Weed Robot, Kaela Stern, Lewis Kanagy, Claire Franz, Carlos Rodriguez Orozco, Jackie Chen, Sachi Hiji, Ayush Kakkanat, William Ta

Mechanical Engineering

Team Weed Scouts has completed our work on a weed-cutting robot for the Girl Scouts of California’s Central Coast. The final robot build provides a solid foundation that can be built and improved upon by future teams. We have completed the robot base and structure, including the chassis, drivetrain, and robot shell. We also completed manufacturing a weed storage bin and canvas cover for the robot. Additionally, we have built a weed scooper, the mechanism that cuts weeds and transports them into a storage compartment. The electronics and programming for remote control of the robot are also implemented. After some …

Treadmill Platform For Quadrupedal Robots, Baxter J. Bartlett, Jack F. Butler, Phillip A. Shafik, Tarun S. Ganamur

Mechanical Engineering

Cal Poly Legged Robots, led by Professor Refvem and Professor Xing, has been leading Cal Poly’s attempts to simulate, produce, and test their legged robots. The initial testing of the locomotion of these robots can be dangerous to the robot since any bugs in the code could cause the robot to fall over and harm itself. Our responsibility as a team was to deliver a portable platform for testing the locomotion capabilities containing a fall prevention mechanism. In short, we have designed a platform for this purpose that consists of a treadmill surrounded by a wheeled chassis with a system …

In-Situ Mechanical Tester, Andrrew Murach, Gustavo Marquez, Kosimo Tonn, Jake Vormbaum

Mechanical Engineering

Over the course of the 2022-23 Cal Poly SLO school year, a small tensile tester device was developed specifically for Dr. Long Wang to test thin film materials under a microscope and generate accurate force versus displacement graphs. A tensile tester was manufactured using purchased and machined components, electronics were consolidated in a separate box and connected, and a program and user interface were written to control the motion, provide custom inputs, and organize useful data for the researcher. Tests were conducted to compare the performance of the device to universal tensile testers available in the Composites lab. The device …

Animatronic Monarch Butterfly: Mechanical System, Janine Rae Moreno, Enrico Cruz, Alexia Murphy, Lakshmanan Muthukaruppan

Mechanical Engineering

This report describes the design, manufacturing, and design verification of an interactive animatronic monarch butterfly created by a team of mechanical and computer engineering students for the Girl Scouts of California's Central Coast. The purpose of the project is to engage Girl Scouts in learning about monarch butterflies and provide hands-on experience in robotics and STEM. The report covers design changes, manufacturing processes, and assembly of various components, including the butterfly body, wings, legs, and electronic housing. The software and electronics used in the project are also briefly discussed, as the computer engineering team was responsible for the software and …

Baja Sae Semi-Active Suspension, Cameron Paul Jones, Ethan Jacobi Mikel, Joshua Macguire Wright, Aditya Garg

Mechanical Engineering

This document outlines the design and justification for the final design of the Baja SAE Semi-Active Suspension Senior Project. The goal of the project was to build a base valve that can adjust suspension damping rates on the fly. This document details the ideation, design, manufacturing, design verification results, and detailed drawing package for the project. Additionally, this document includes information regarding the pressure drop calculator, O-ring calculations, and CAD. The manufacturing processes used to create the valve and the testing and evaluation of the valve are included as well. Finally, the methods that were used to manage this project …

Planar Element Alignment System, Benjamin E. Lavigna, Benny F. Cruz, Samuel Gierhan, Jacob Q. Henriksen

Mechanical Engineering

Precise alignment to the micron level is a necessity for microfluidic/micromechanical devices to function as designed. Because of this, a micro-alignment device was commissioned by Professor Hans Mayer on behalf of the Cal Poly Microfluidics Laboratory. Prototype creation was bounded by a set of requirements including, ability to align PDMS & Silicon wafer halves to ± 10 microns, total process speed of three minutes, and total budget of $3000. Some major design hurdles included an ability to verify alignment, possible non-planar alignment pieces, and an inability to contact any point on the face of the alignment pieces after bonding treatment. …

Northrop Grumman Collaboration Project, Nikkia Rae Psomas-Sheridan, Santiago Robles, Ben Elkayam, Benjamin Ulfhake

Mechanical Engineering

The Northrop Grumman Collaboration Project (NGCP) is a collaborative club project sponsored by Northrop Grumman for the students of Cal Poly San Luis Obispo (CPSLO) and Cal Poly Pomona (CPP) to create a fleet of vehicles to aid in the simulated rescue of stranded hiker. The CPSLO club is responsible for delivering an autonomous flight vehicle that can suppress a fire and retrieve a payload. Mechanical Design Team of the CPSLO team was responsible for the design of the frame, electronics housing, and payload and fire suppression systems.

Novelty Ice Cream Assembly Prototype, Mason Sylvester, Logan Williamson, Alvaro Martinez, Adin Gilman-Cohen

Mechanical Engineering

Cool Beans USA is a novelty ice cream startup company founded by Keith Zachow. In the winter of 2022, our team began working with Mr. Zachow to develop a machine to automate parts of the production process for his product. This product consists of two hemispherical ice-cream cone shell halves filled with soft serve ice cream and pressed together. The assembled pods are around the size and shape of a small walnut and are intended to be sold in stores as a frozen finger food. At the time of project inception, this product was in its early stages and was …

Rotating Backing Brush, Caleb Savard, David Dalal, Max Allred, Mathis Weyrich

Mechanical Engineering

In the final steps of GAF’s shingle production process, small asphalt particles called fines are applied. Some fines adhere well to the shingle sheet, while others temporarily stick only to fall off the sheet further down the manufacturing line. As a result, the shingle plant floor is covered in fines that have fallen due to vibrations and gravity. The technicians and engineers at GAF want a cleaner working environment and to potentially reuse the loose fines. We are a senior project team that solved this problem by designing a system to remove and collect loose fines. In this document, the …

Tree Climbing Limb Saw, Andrew E. Bray, Parker Tenney, Drew M. Robles, Aimee T. Chiem

Mechanical Engineering

This document is the comprehensive report for the Tree Climbing Limb Saw Senior Project. The purpose of the Tree Climbing Limb Saw project, completed by mechanical engineers Andrew Bray, Aimee Chiem, Drew Robles, and Parker Tenney, is to remove low-hanging branches (<15 >ft) to prevent forest fires from travelling up into the canopy, where wind can carry embers for miles. An RC car was heavily modified to create a solution for this problem. A chainsaw was also mounted to deal with the cutting part of the problem. Creating a project which aims to solve this problem is a great step …

Interactive Lego Girl Scout Arm, Christopher Suzuki, Emi Okuyama, Bryson Shores, Karina Sandoval

Mechanical Engineering

This Senior Project Report document outlines the senior design project for Girl Scouts of California’s Central Coast (GSCCC) led by a team of four Mechanical Engineering students at California Polytechnic State University, San Luis Obispo. The project encompasses the researching, designing, prototyping, and testing of a LEGO robotic arm for the Girl Scouts to learn more about STEM (Science, Technology, Engineering, and Mathematics) and provide support to each Girl Scouts cookie sales in their stores. Their goal was to build a LEGO robotic arm that will interact with customers at the Girl Scout stores and promote the girl scouts' interest …

Barker Bird Animatronic Senior Project Report, Marcus Monroe, Nolan Clapp, Ishan Jandaur, Jonathan Ogden

Mechanical Engineering

This document describes how our F71 Senior Design Project team developed a 3D printed, electronic bird that mimics Disneyland’s first animatronic, the Barker Bird. An animatronic is a mechanical puppet that replicates real life movement with robotic parts. Disney’s Barker Bird is a well-known animatronic that replicates a talking macaw with multiple moving systems. The final prototype completed by our team serves as a teaching tool for CAPED (Cal Poly Amusement Park Engineers and Designers) club members that are interested in the field of animated robots.

Mtb Daq - Mountain Bike Data Acquisition System, Theodore J. Philliber, Ronan M. Shaffer, Dylan M. Ruiz, John M. Ringrose

Mechanical Engineering

Mountain bike suspensions systems are set up and tuned based only on qualitative, ‘feeling’-based metrics. The MTB DAQ, sponsored by Dr. Joseph Mello with the Cal Poly Mechanical Engineering Department, is a data acquisition system we developed to improve suspension tuning with a data-driven approach. The system mounts to a bicycle frame and has sensors that measure vibration and travel speed to characterize the bike’s motion. While similar systems exist, they cost in the thousands of dollars range and are very specific to individual bike geometry. Our system was designed to be more affordable to the average rider as well …

Kinetic Energy Harvesting Device For Long Distance Thru-Hikers, Jarod Reece Lyles, Ryan William Mclaughlin, Shaw Hawkeye Hughes, David Hernandez

Mechanical Engineering

The intent of this project was to design and build a device capable of harnessing biomechanical energy from a thru-hiker to charge electronic devices. To begin, we ruled out any potential solutions that could be intrusive to the hiking experience, limiting us to a device that could be placed in a backpack.

After defining the scope of the project, we ideated upon potential designs, and chose to move forward with a rotational generator based design. Detailed analysis included both system dynamics and vibrations based models, and from this analysis we developed a mechanical design in SOLIDWORKS®️ and a custom printed …

Therapeutic Mechanical Horse, Cade M. Liberty, Aleya Dolorfino, Peter Philips, Zuzanna Dominik, Luke Watts

Mechanical Engineering

Jack's Helping Hand and its hippotherapy participants required a device to serve as an alternative to a live horseback riding experience that could also increase the range of riders. This would provide more clients with equine-assisted therapy that has proven to better the lives of people with both physical and mental disabilities. Horses can be unpredictable, tall, and sometimes anxiety-inducing, especially for new riders. Our group’s aim was to develop a mechanical horse that will be able to reduce these issues for equine therapy centers and the riders they help. When a rider gets to practice sitting on the horse …

8 Dof Quadrupedal Hopping Robot, Clayton T. Elwell, John Bennett, Tyler Mccue, Daniel Munic

Mechanical Engineering

The goal of our senior project was to fabricate an eight degree of freedom (DOF) prototypical quadrupedal robot, develop a controller than commands the quadruped to repeatedly jump 10 cm in the air, and fabricate a modular test stand to safely deploy our controller on the quadruped. The creation of a functional quadruped will bring attention to Dr. Siyuan Xing and Charlie Refvem’s research group, Cal Poly Legged Robots, and will give future Cal Poly undergraduate and graduate students a learning tool to explore dynamic control of biomimetic robotic systems.

Over the course of our senior project, we successfully manufactured …

Solar Solution For Mini-Rover, Michaella Ochotorena, Derick Louie, Jonathan Cederquist, Collin Petersen, Cole Korchek

Mechanical Engineering

This project focuses on designing, building, and testing a functional prototype of a collapsible solar array on the mini Mars rover being developed by client and sponsor, Mr. Rich Murray. Although many previous collapsible solar arrays have been deployed for space missions, the previous solar-powered Mars rovers only deployed their arrays once upon landing. This solar array will be able to collapse and deploy multiple times to allow for greater rover mobility and stability when the rover is not charging. This system is critical to the success of the rover project because it provides power without which the rover cannot …

Brush Clearing Trimming Device: Drivetrain, Dallas Russell, Nathan Small, Alex Imbery, Jordan Aguana

Mechanical Engineering

We, the “DT Inc.” team, have been tasked with the redesign of the drivetrain of an electric brush clearing tool created for trail and roadside use. We started the design process by doing research on the currently available products and determining their strengths and shortcomings. We also tested the prototype given to us by our sponsor, and listened to our sponsor about what he liked about his design and what he wanted changed. We resolved from this research that the most important improvements that we needed to make were to improve the traction, reduce the speed and increase the torque, …

Baker/Koob Final Report: Solar Solution For Mini Mars Rover, Jonathan Cederquist, Cole Korchek, Derick Louie, Michaella Ochotorena, Collin Petersen

Mechanical Engineering

This project focused on designing, building, and testing a functional prototype of a collapsible solar array on the mini Mars rover being developed by client and sponsor, Mr. Rich Murray. Although many previous collapsible solar arrays have been deployed for space missions, the previous solar-powered Mars rovers only deployed their arrays once upon landing. This solar array will be able to collapse and deploy multiple times to allow for greater rover mobility and stability when the rover is not charging. This system is critical to the success of the rover project because it provides power without which the rover cannot …

Interactive Lego Girl Scout Arm, Chris Suzuki, Emi Okuyama, Bryson Shores, Karina Sandoval

Mechanical Engineering

This Senior Project Report document outlines the senior design project for Girl Scouts of California’s Central Coast (GSCCC) led by a team of four Mechanical Engineering students at California Polytechnic State University, San Luis Obispo. The project encompasses the researching, designing, prototyping, and testing of a LEGO robotic arm for the Girl Scouts to learn more about STEM (Science, Technology, Engineering, and Mathematics) and provide support to each Girl Scouts cookie sales in their stores. Their goal was to build a LEGO robotic arm that will interact with customers at the Girl Scout stores and promote the girl scouts' interest …

Multifamily Complex Smart Locks For Property Management And Tenant Security, April Mills, Allen Chen, Dana Kumamoto, Michael Cook

Mechanical Engineering

Maintaining and managing hundreds of locks and physical keys for an apartment complex can be time consuming and costly, especially when the apartments turn over to new tenants. Our goal was to develop a smart door lock that is compatible with Obodo’s management app for apartment complexes to make accessing apartments secure and simpler for tenants and easier to manage for owners.

We designed and manufactured one smart door lock that is powered with four AA batteries and utilizes a dynamic NFC device and Bluetooth technology. The board can enter a sleep mode which reduces power consumption. The dynamic NFC …

Cal Poly Fluid Power Vehicle Challenge 2022, Sangmin Sung, Eddy Rodriguez, Travis Welch, Jeremy Baechler, Kevin Pauls

Mechanical Engineering

In this report, the Featherweight Cycles design team puts forth the scope and overview of their design project, discusses background research and competitor analysis, and presents the project’s final design and manufacturing plans. The overall goal of this project is to fabricate and compete in the Fluid Power Vehicle Challenge, hosted by the National Fluid Power Association. To better define the design process, the team researched previous year’s designs from Cal Poly, as well as winning designs from the last two years to form a baseline of knowledge about competing schools’ designs. After researching multiple design paths, Featherweight Cycles chose …

Gaylord Produce Removal Machine, Marcus Takashi Hirose Lee, Jacob Michael Perlman, Carissa Abigail Kamm, Mark Misao Loera

Mechanical Engineering

This Final Design Review Report outlines the senior design project that began Winter Quarter of 2021 at California Polytechnic State University. Our team consists of three mechanical engineers and a general engineer, working together to design, build, and test a product for Alameda County Food Bank. The goal of the final product is to relieve volunteers and employees of tedious manual labor and increase efficiency during the removal of produce from large Gaylord containers. This document describes background research, the objectives of the project, chosen concept design, analysis and initial prototyping of said concept, the final design, and verification prototype …

Gaf Fiberglass Mat Slitter Blade Sharpener, Mark D. Breaux, Bradley M. Smith, Esteban Carrillo, Carlos Espinoza

Mechanical Engineering

This document contains an overview for the offline slitter blade sharpening system created for GAF to sharpen their current cutting tools in a timely and safe manner without hindering the timeline and production of their assembly line. This design was developed by four undergraduate students at from Cal Poly, San Luis Obispo. This document first investigates background information of any patents, current sharpening device, sharpening safety standards, or literature review that may be useful in a sharpening mechanism device. This document also contains our design concept prototype, which consists of three main features, the use of a top guard for …

Mug For Veterans With Tremors, Eliot Daniel Briefer, Nicholas Michael Greco, Lucas Paul Martos-Repath, Tiernan Lif Kehoe

Mechanical Engineering

This Final Design Review Report outlines the senior design project completed by a team of mechanical engineering students attending California Polytechnic State University, San Luis Obispo for the McGuire Veterans Affairs Medical Center in Richmond, VA. The scope of the project was to design, build, and test a device for veterans with tremors that would allow them to enjoy their favorite drinks comfortably and easily, without worrying about spills. The final product must be lightweight, aesthetic, capable of handling various tremor types, and can be operated in multiple planes to allow the veterans full control over the device. This document …