Engineering Commons^™

The Impact Of Education On Career Growth In The Construction Industry, Luis F. Rodrigues

Construction Management

A construction management degree and an apprenticeship are the two educational routes for a career in the construction industry. There are divisions within the workforce that reflect these educational pathways. Ideally, an alternative education would allow individuals without access to a university education to develop their career from an entry level position. However, if education has a long-term career impact, then limiting factors on education are consequently limiting on career growth. In examining if there is a ceiling on career growth relative to educational backgrounds, both education and experience were identified as key variables. In the case study presented, the …

Mechatronics Education At Kettering University: Development Of Learning- Specific Hardware And Software, Jeffrey Hargrove, Theodore J. Stokes

Jeffrey Hargrove

A series of learning-specific electronic circuit boards and associated software has been developed to support mechatronics education in the Mechanical Engineering Department at Kettering University. The boards are designed to interface to the Toshiba TLCS-900H Microprocessor Trainer and Evaluation Board. The purpose of these boards is to provide mechanical engineering students of mechatronics with robust hardware that readily permits interfacing of sensors and actuators to microcontrollers used in mechatronic applications. Further, the boards feature signal conditioning circuits for use in conjunction with sensors, and driver circuits for operating high-current actuating devices. Supporting software has been written to permit ready use …

Development And Implementation Of Mechatronics Education At Kettering University, Jeffrey Hargrove

Jeffrey Hargrove

The Mechanical Engineering Department at Kettering University has completed development of a significant new component of education in mechatronics. The work began in the fall of 1997 as the principal part of an award for “Instrumentation and Laboratory Improvement” by the Division of Undergraduate Education of the National Science Foundation. It has culminated with the successful implementation of two undergraduate courses in mechatronics, two mechatronics laboratories and a website to support the educational endeavors of the mechatronics students. As will be described in this paper, the first course and its laboratory exercises are designed specifically to provide the students with …

A Mixed Method Study Of Infrastructure Resilience Education And Instruction, John Richards, Suzanna Long

Engineering Management and Systems Engineering Faculty Research & Creative Works

As the frequency and severity of natural and man-made disasters increases, the importance of improving the resilience of complex infrastructure systems in an uncertain environment is increasingly critical. Proper training and education are key components to addressing this issue, but it is unclear how and where modeling under uncertainty, infrastructure systems management, and resilient systems are integrated into the standard undergraduate and graduate engineering management curriculum. This research uses a mixed method to determine whether and at what level engineering managers receive instruction regarding the implementation of tools and techniques to improve infrastructure resilience. A review of current courses and …

Debugging: The Key To Unlocking The Mind Of A Novice Programmer?, Anthony A. Lowe

School of Engineering Education Graduate Student Series

Novice programmers must master two skills to show lasting success: writing code and, when that fails, the ability to debug it. Instructors spend much time teaching the details of writing code but debugging gets significantly less attention. But what if teaching debugging could implicitly teach other aspects of coding better than teaching a language teaching debugging? This paper explores a new theoretical framework, the Theory of Applied Mind for Programming (TAMP), which merges dual process theory with Jerome Bruner’s theory of representations to model the mind of a programmer. TAMP looks to provide greater explanatory power in why novices struggle …

Improving The Sustainability Of The Built Environment By Training Its Workforce In More Efficient And Greener Ways Of Designing And Constructing Through The Horizon2020 Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The construction industry consumes up to 50% of mineral resources excavated from nature, generates about 33% of CO2 present in the atmosphere and is responsible for 40% of total global energy through both construction and operation of buildings. The realisation that current pervasive construction practices now face globalization, sustainability, and environmental concerns, as well as ever-changing legislation requirements and new skills needed for the information age has resulted in technologies such as Building Information Modelling (BIM) becoming a key enabler in navigating these barriers. To assist in overcoming these barriers, a number of funding initiatives have been put in place …

Bim In Ireland 2019: A Study Of Bim Maturity And Diffusion In Ireland, Barry Mcauley, Alan Hore, Roger West

Conference papers

In 2017, the BIM Innovation Capability Programme team applied five macro BIM maturity conceptual models to capture the capability of the Irish construction industry and assess its BIM maturity. The results found that while Ireland is mature for modelling processes, it is less developed with regards to collaboration processes and policies. Ireland also ranked poorly when it came to regulatory frameworks, measurements and benchmarks compared to a number of countries which also applied the same conceptual models. At the time, the findings highlighted that Ireland’s diffusion dynamic was middle out, meaning that larger organisations or industry associations were pushing the …

A Patterning Approach To Complexity Thinking And Understanding For Students: A Case Study, Shae L. Brown

Northeast Journal of Complex Systems (NEJCS)

Complexity thinking and understanding are vital skills for young people in these times of uncertainty and change. Such skills contribute to resilience and capacities for adaptivity and innovation. Within my teaching practice I have found students to be aware of complex dynamics, uncertainty and change, both in their lives and in the world. However, the current curriculum lacks language and process to conceptualise, articulate and develop complexity understanding. To address this problem, I developed and introduced a patterns-based design and process to a cohort of Australian secondary students. Comprising flowform patterning together with ecological metaphors, the design forms a conceptual …

Delivering Energy Savings For The Supply Chain Through Building Information Modelling As A Result Of The Horizon 2020 Energy Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The global buildings sector is now responsible for 40% of final energy consumption as well as accounting for 33% of energy-related carbon dioxide emissions. This has resulted in a growing urgency to address energy and emissions from buildings and construction, to meet restrictive 2020 targets as specified by the European Union (EU). To achieve these targets a number of funding initiatives have been put in place through Horizon 2020 with a focus on BIM, due to it having the potential to rapidly produce energy outputs that enable design teams to analyse and compare the most cost-effective, energy-efficient options. However, despite …

Materials Science And Engineering, Joshua P. Steimel

Pacific Open Texts

This text serves to provide a brief overview of some of the myriad of topics available for study in the field of Materials Science. This is by no means a comprehensive compilation of Materials Science and Engineering topics but is instead meant as an introduction to the topic for entry-level undergraduates who want to pursue a career studying materials.

Ada Code Education In The Construction Management (Cm) Curriculum, William Joseph Cefali

Construction Management

The Americans with Disabilities Act Standards for Accessible Design is becoming an integral part of construction. On many jobsites, recent graduates may not have enough knowledge to adequately catch and fix ADA compliance problems before they become a critical issue. With nearly all students and graduates going to work on projects governed by this code, knowledge of these codes, where to find them, and how to apply them is essential for graduates. Construction Management students believe this information would be very valuable to learn in school, and critical information to help them with their careers when they enter the industry. …

Journeyman International: Peace Academy Of The Sciences And The Arts, Alyssa L. Mathias

Construction Management

For years, K-12 education has been taught through separate, individual subjects such as Math, English, Art, and Science. Primary education has remained stagnant while our society is constantly evolving with technological advances and innovation. The Peace Academy of the Sciences and Arts in San Luis Obispo, California are a group of visionaries and educators challenging traditional learning styles. They are striving to offer an education that focuses on holistic learning and integrating all subjects into big ideas to create competent, compassionate leaders for the future. My senior project is a collaboration between Journeyman International, the Peace Academy, a student in …

Advanced Concrete Course For Cal Poly Construction Management Department, Dante N. Feliciano

Construction Management

This senior project provides a solution to the Construction Management Department at Cal Poly, San Luis Obispo whose curriculum lacks an individual Concrete course. With Concrete being one of the most used building material worldwide, this course will help immensely. The goal of this project is to fill the gap with an Advanced Concrete Course that is prepared and ready to be introduced to future students. The course has an emphasis on outside research learning – where the student gets to become the instructor. Carefully thought out and executed lecture materials are included in the course. Lecture slides give background …

Construction Management Computer Lab Redesign, Matt Williamson

Construction Management

This project looked to take an inventory of the current Construction Management computer lab, communicate with students and other stakeholders about how the computer lab is used, look ahead to how the lab will be used in the future, and create a new design that best suits the Construction Management department.

Problem Based Learning: A Case Study From Mechanical Engineering, Kevin Delaney, Ger Nagle

Conference papers

Engineering graduates today must be capable of much more than solving technical problems taught in engineering school. Despite learning to quantify the performance of certain engineering objects, undergraduate students find it challenging to integrate these elements into basic design concepts through a coherent and systematic design process. To help students develop real-world engineering skills as part of their engineering education, the Mechanical Engineering Discipline in Technological University Dublin (TU Dublin) introduced Problem Based Learning (PBL) for Third Year Mechanical Engineering students in 2005.

A recent review of this teaching approach highlighted deficiencies not envisaged when the initial PBL module was …

Investigation And Development Of Multiphysics Modeling Software Applications For Building Noise Control, Jennifer Solheim

Theses/Capstones/Creative Projects

COMSOL Multiphysics is a simulation software for modeling engineering processes and designs. The software can be used to create applications that allow users to change variables in a model and see the effect on the physics phenomenon under investigation. COMSOL applications can provide an interactive learning experience and help students visualize engineering concepts. This project examines the use of COMSOL to develop applications related to noise control in buildings, focusing on making them useful for education. Two applications were developed based on existing COMSOL models. One simulates sound absorption by a porous foam, and the other simulates sound propagation through …

Geo-Spatial Mapping As A Catalyst For Creative And Engaged Design In Engineering Education, Jessie Zarazaga

Multidisciplinary Studies Theses and Dissertations

Exploiting the technology of geo-spatial mapping student designers can develop deep understandings of the rich and layered data of a spatial context, a situational understanding essential to responsible civic design. However the actions inherent in the construction of spatial data armatures can simultaneously be harnessed as creative strategies, in which mapping processes become the context for generative spatial play. The ambition of this study is to propose efficient pedagogic structures to help prepare civil and environmental student engineers to be not only strong participants, but leaders, in the design of the built environment. The interpretation of site data, mapped as …

Educating The Space Scientists At Embry-Riddle Through Design, Build And Fly Rocketry Experience, Pedro Llanos, Robert E. Haley, Sathya Gangadharan

Pedro J. Llanos (www.AstronauticsLlanos.com)

Formulación De Una Propuesta Para La Programación De Horarios En El Colegio Sagrado Corazón, Leidy Ximena López Roa, Angie Milady Fino Ramos

Ingeniería Industrial

Este trabajo presenta una propuesta de solución a un problema de timetabling que se deriva de la generación de horarios escolares para el colegio Sagrado Corazón considerando una estructura curricular particular ya que cuenta con diferentes líneas de estudio por el énfasis del proyecto educativo institucional (PEI), además de la oferta completa de niveles escolares formales, múltiples sedes, rotación de profesores con base a la especialización de estudios, y variación en los tiempos correspondientes a los grupos de primaria, básica secundaria y media vocacional. En el desarrollo de la investigación se formula un modelo matemático de programación entera mixta donde …

Public Attitudes About Private Forest Management And Government Involvement In The Southeastern United States, Melissa M. Kreye, Renata Rimsaite, Damian C. Adams

Daugherty Water for Food Global Institute: Faculty Publications

In the southern United States the country’s top wood-producing region, factors such as intergenerational land transfer and population spillover from urban areas have resulted in forestland conversion and reduced production of critical ecosystem services associated with forest systems (e.g., timber, clean water supply, wildlife habitat). Public attitudes, which drive forestland policy prescriptions, may also be evolving due to the way people experience and perceive forests (e.g., recreation), and think about the role of government in private forest decisions. These changes have significant implications for forestland management and the forest-based economy, both locally and globally. We present the results of a …

Adapting The Surveying Curriculum To New Dimensions Of The Profession, Fahria Masum, Reinfried Mansberger, Audrey Martin, Gerhard Navratil, Anthony Mushinge

Articles

Today the surveying profession is very different from what it was twenty years ago. Recent technological innovations, globalization, and global land-related challenges have allowed a wide range of advances in the surveying profession. The vision is to promote surveying practices that can enhance the quality of services in a variety of tracks in the land profession. According to the new adjacent professional areas and the needs of the labor market, academic courses for surveyors have to be adapted to meet the broader scope of the surveying profession and to supply highly qualified land professionals. This paper outlines the new challenges …

An Investigation Of Three Subjective Rating Scales Of Mental Workload In Third Level Education, Nha Vu Thanh Nguyen

Dissertations

Mental Workload assessment in educational settings is still recognized as an open research problem. Although its application is useful for instructional design, it is still unclear how it can be formally shaped and which factors compose it. This paper is aimed at investigating a set of features believed to shape the construct of mental workload and aggregating them together in models trained with supervised machine learning techniques. In detail, multiple linear regression and decision trees have been chosen for training models with features extracted respectively from the NASA Task Load Index and the Workload Profile, well-known self-reporting instruments for assessing …

Understanding Effects Of Engineering Outreach On Elementary Students, Thomas Cobb

Williams Honors College, Honors Research Projects

Currently, there is a desire to increase engineering understanding held by elementary students. As such, there needs to be a way to stimulate not only engineering, but other science, technology, engineering, and mathematics (STEM) topics in a young student’s lifestyle. One way to emphasize the importance of STEM while also showing how fun it can be is through different hands on activities led by individuals partaking in undergraduate studies or the industry. While having the students participate in the activities, it is important to understand what the students are learning and how the activity overall is viewed. With the help …

Big Five Technologies In Aeronautical Engineering Education: Scoping Review, Ruth Martinez-Lopez

International Journal of Aviation, Aeronautics, and Aerospace

The constant demands that technology creates in aerospace engineering also influence education. The identification of the technologies with practical application in aerospace engineering is of current interest to decision makers in both universities and industry. A social network approach enhances this scoping review of the research literature to identify the main topics using the Big Five technologies in aerospace engineering education. The conceptual structure of the dataset (n=447) was analyzed from different approaches: at macro-level, a comparative of the digital technology identified by cluster analysis with the number of co-words established in 3 and 8 and, a keyword central structure …

Synthesis And Adsorption Experiments With Metal-Organic Frameworks For High School And Undergraduate Laboratory Settings, Kate Holley

Legacy Theses & Dissertations (2009 - 2024)

Seven experiments are described and outlined here that introduce high school and undergraduate students to metal–organic frameworks (MOFs) and their applications. The experiments were designed to be completed with basic laboratory equipment and supplies and without the use of expensive characterization instruments, simulating typical high school chemistry laboratory conditions. Students synthesized two well-known MOFs, HKUST-1 and aluminum fumarate, using simple, safe, and rapid methods (fast enough to be performed within the time constrains of a typical high school class). Students then use their synthesized MOFs to explore their inherent sorption properties. In one set of experiments, the synthesized MOFs are …

Infographic: Enhancing Engineering Students’ Communication Skills Through A Team-Based Graphics Course Project, Leroy Long Iii, Kari L. Jordan, William Wanyagah

Publications

This infographic supports the article Enhancing Engineering Students’ Communication Skills through a Team-Based Graphics Course Project which can be accessed here: https://commons.erau.edu/asee-edgd/conference70/papers-2016/5/