Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 8 of 8

Full-Text Articles in Engineering

Utilization Of Low-Lime Calcium Silicate In Hydrated And Carbonated Cementitious Materials, Mohammad Rakibul Islam Khan Dec 2019

Utilization Of Low-Lime Calcium Silicate In Hydrated And Carbonated Cementitious Materials, Mohammad Rakibul Islam Khan

Electronic Theses and Dissertations

This study investigated the potential application of wollastonite as a cementitious material in both hydrated and carbonated binder systems. Wollastonite is naturally occurring low-lime calcium silicate (CaO.SiO2) mineral with a substantially lower carbon footprint compared to the ordinary Portland cement (OPC). The first part of this work presented the application of wollastonite as partial replacement of OPC in traditional hydrated cement-concrete system. Second part of this work evaluated the properties of carbonation activated binder produced using wollastonite as the primary ingredient.

For the first part of the thesis, ground wollastonite with 3.5 µm and 9 µm mean particle …


Micro-Mechanical Analysis Of Corrosion Products Formed During Long-Term Carbonation Induced Corrosion Of Steel, Marijana Serdar, Dubravka Bjegovic, Valérie L’Hostis, Stéphane Poyet, Damien Féron Nov 2019

Micro-Mechanical Analysis Of Corrosion Products Formed During Long-Term Carbonation Induced Corrosion Of Steel, Marijana Serdar, Dubravka Bjegovic, Valérie L’Hostis, Stéphane Poyet, Damien Féron

International Conference on Durability of Concrete Structures

During corrosion distinct types of corrosion products form, composed of different ratios of ferrous ions and oxide, hydroxides. Corrosion products have different physical and mechanical properties, mainly density, resistivity, volume and modulus of elasticity compared to iron. Knowing properties of corrosion products is indispensable for service life modelling of structures and can give valuable insight into the long-term corrosion propagation process. In this study micro-indentation method was used to evaluate mechanical properties of different layers formed during long-term carbonation induced corrosion of steel in concrete. Investigation was performed on three sets of reinforced concrete samples, that underwent corrosion during 50, …


Load-Bearing Capacity Of Corroded Reinforced Concrete Structures Caused By Carbonation And Exposed To Xc4, Esko Sistonen Nov 2019

Load-Bearing Capacity Of Corroded Reinforced Concrete Structures Caused By Carbonation And Exposed To Xc4, Esko Sistonen

International Conference on Durability of Concrete Structures

Concrete corrosion can be visualized as a combination of chemical reaction on concrete and electrochemical reaction on steel reinforcement. Failure of steel reinforcement due to corrosion can inflict significant stress on concrete during load distribution. As such, it is necessary to analyse the long-term effects of corrosion on the load bearing capacity and bending strength of steel reinforcement. This research investigated the mechanical and electrochemical properties of concrete exposed to long-term corrosion for a period of 16 years. Non-destructive testing like crack width measurements, visual examination, electrochemical measurements using Galva Pulse and determination of average chloride content were undertaken to …


Influence Of Cracks On The Carbonation Resistance Of Concrete Structures, Abbas Al-Ameeri Mr., Muhammed Imran Rafiq Dr., Orania Tsioulo Dr. Nov 2019

Influence Of Cracks On The Carbonation Resistance Of Concrete Structures, Abbas Al-Ameeri Mr., Muhammed Imran Rafiq Dr., Orania Tsioulo Dr.

International Conference on Durability of Concrete Structures

Carbonation-induced corrosion of steel rebar embedded in concrete is one of the major issues influencing durability of reinforced concrete structures. It has been acknowledged that structural cracks in concrete influences the carbon dioxide (CO2) diffusivity and accelerates the carbonation-induced reinforcement corrosion, however most of the previous studies on the carbonation induced corrosion have concentrated on the un-cracked / unloaded concrete. This study investigates the impact of cracks caused by loading on the depth of carbonation into concrete. Concrete prisms (100x100x500 mm) were subjected to four different crack widths (0, 0.05-0.15 mm, 0.15-0.25 mm and 0.25-0.35 mm) and the …


Climate Resilient Concrete Structures In Marine Environment Of Bangladesh, Sudarshan Srinivasan, Ian Gibb Nov 2019

Climate Resilient Concrete Structures In Marine Environment Of Bangladesh, Sudarshan Srinivasan, Ian Gibb

International Conference on Durability of Concrete Structures

Bangladesh has a vast coastal infrastructure seriously affected by climate change and associated extreme environmental conditions. The rural construction sector in Bangladesh will be undergoing rapid growth in the next 10 years through rural infrastructure development programmes funded by the Asian Development Bank and the World Bank. The Local Government Engineering Department (LGED in Bangladesh), owns the rural concrete infrastructure, maintains around 380, 000 linear metres of concrete bridges or culverts in the rural coastal areas and are planning to build more than 200,000 linear metres during the next ten years. In order to design and construct durable concrete structures …


New Model For Natural Carbonation Prediction In Reinforced Concrete – Concept And Validation On Chemical Admixtures, Stephen O. Ekolu, M Raats Nov 2019

New Model For Natural Carbonation Prediction In Reinforced Concrete – Concept And Validation On Chemical Admixtures, Stephen O. Ekolu, M Raats

International Conference on Durability of Concrete Structures

A new model for prediction of natural carbonation in reinforced concrete structures has recently been developed and presented in (Ekolu, 2018). For brevity, the model is referred to as ESS model. It employs concrete strength as the primary property depicting core carbonation behaviour of any given concrete while other factors induce secondary influence. Chemical admixtures in concrete significantly influence concrete behaviour. Using experimental data from the literature (Dan-Herrera et al., 2015), the model behaviour is verified under use of various types of chemical admixtures of concrete including internal curing, shrinkage reducing, viscosity modifying, and high range water reducing admixtures. Class …


Performance Of Concrete Made With A Calcined Clay – Limestone-Portland Cement Exposed To Natural Conditions, Fernando Martirena, Ernesto Díaz, Dayran Rocha, Hamed Maraghechi, Karen Louise Scrivener Nov 2019

Performance Of Concrete Made With A Calcined Clay – Limestone-Portland Cement Exposed To Natural Conditions, Fernando Martirena, Ernesto Díaz, Dayran Rocha, Hamed Maraghechi, Karen Louise Scrivener

International Conference on Durability of Concrete Structures

This work presents the results of an investigation carried out to assess durability of concrete made with a calcined clay- limestone-Portland cement with 47% of clinker, hereafter named LC3, produced during an industrial trial in 2013. LC3 was used to cast concrete blocks and later expose them at a natural location at the northern coast of Cuba. Reference concrete was cast with Cuban Portland cement having 88% of clinker. Throughout three years (2015, 2016, 2017) concrete cores were systematically taken and the specimens were subjected to a testing program that included Formation factor, chloride profiling, surface resistivity, air permeability and …


Preformed Partial Gel Injection Chased By Low-Salinity Waterflooding In Fractured Carbonate Cores, Ali K. Alhuraishawy, Baojun Bai, Mingzhen Wei, Abdullah Almansour Feb 2019

Preformed Partial Gel Injection Chased By Low-Salinity Waterflooding In Fractured Carbonate Cores, Ali K. Alhuraishawy, Baojun Bai, Mingzhen Wei, Abdullah Almansour

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Fractures and oil-wet conditions significantly limit oil recovery in carbonate reservoirs. Gel treatment has been applied in injector wells to modify the prevailing reservoir streamlines and significantly reduce fracture permeability, whereas low-salinity waterflooding has been applied experimentally to modify rock wettability toward water-wet for improved oil recovery. However, both processes have limitations that cannot be resolved using a single method. The objective of this study was to test whether low-salinity water could enable gel particles to move deeply into fractures to efficiently increase oil recovery and control water production. A semitransparent fracture model of carbonate cores and acrylic plates was …