Engineering Commons^™

The Mars Desert Research Station - Erau Crew 160 Expedition, Lycourgos Manolopoulos, Ashley Hollis-Bussey, Hiroki Sugimoto, Cassandra Vella, John Herman, Marc Carofano

Student Works

The Mars Desert Research Station (MDRS) is a research program which is owned and operated by the Mars Society. The MDRS is located in Hanksville, Utah which hosts simulations that are typically two weeks long for professional scientists and engineers as well as college students of all levels, in training for human operations specifically on Mars. This space analog facility is in isolation, allowing for rigorous field studies regarding research that represents a true mission as if the crew members are conducting a real expedition on Mars. Participants are assigned specific roles and tasks that are typically aligned with their …

Stability And Redispersion Of Platinum Nanoparticle Suspensions For Attachment To Dyes In Low-Cost Solar Cells, Jeffrey Rothstein

Honors Scholar Theses

The project involves optimizing the synthesis, washing, and redispersion of platinum nanoparticles. The nanoparticles are to be attached to dye molecules where they will act as nanocatalysts to reduce energy losses in low-cost dye-sensitized solar cells. The goal is to develop a process based on a pure or mixed solvent that will maintain a stable dispersion of the nanoparticles without interfering with their ability to bond with the dye molecules in the solar cell.

Solar Car Suspension System, Alex Power, Adam O'Camb

Mechanical Engineering

No abstract provided.

Photovoltaic Cooking In The Developing World, Tyler Watkins, Christopher O'Day, Omar Arriaga

Mechanical Engineering

The challenge of clean cooking is faced by hundreds of millions of people worldwide. We present a cooking technology consisting of a solar panel directly connected to an electric heater in a well-insulated chamber. Assuming continued decrease in solar panel prices, we anticipate that in a few decades Solar Electric Cooking technologies will be the most common cooking technology for the poor. Appropriate use of insulation reduces the power demand making low-power Insulated Solar Electric Cooking systems already cost competitive.

Photovoltaic Installation In Ecuador And The Amazon, David Mulder

Construction Management

The Photovoltaic Installation in Ecuador and The Amazon is part of a collaborative effort between two major construction clubs at Cal Poly: NECA and MCAA. Four students, two from each club, traveled with two faculty to install photovoltaics for two different communities. The first project was a solar installation to provide fresh water for the community of Santa Rosa. Project number two, was a sixteen-panel installation in Shell, Ecuador for the non-profit Reach Beyond. The main goals of each project were to provide fresh water, and achieve net zero electrical consumption.

Experimental Investigation Of Plasma Dynamics In Jets And Bubbles Using A Compact Coaxial Plasma Gun In A Background Magnetized Plasma, Yue Zhang

Electrical and Computer Engineering ETDs

Numerous solar and astrophysical observations of jet- and bubble-like plasma structures exhibit morphological similarities, suggesting that there may be common plasma physics at work in the formation and evolution processes of these structures at different system scales. The ideal magnetohydrodynamics (MHD) provide the necessary theoretical basis for employing laboratory experiments to investigate key physical processes in nonlinear astrophysical and solar systems, especially when magnetic fields are present.

A coaxial magnetized plasma gun has been designed, installed, and operated in the HelCat linear device at the University of New Mexico. In Region I, a current-driven plasma jet is formed. The plasma …

Nanomaterials For Solar Distillation Technology, Jack Warren Stoddard Cheney

UNLV Theses, Dissertations, Professional Papers, and Capstones

Water is the most important resource for mankind. Yet, 97% of the earth’s surface water is seawater in the oceans and only 3% is fresh water in ground water. Therefore, different kinds of water desalination and treatment technologies have been developed, and water distillation is a basic process of evaporating water in order to leave behind impurities such as minerals, pollutants, and other contaminants. Although distillation is known as an effective water treatment process that removes many kinds of bacteria and inorganic chemicals and heavy metals, a large amount of conventional energy and non-renewable resources are consumed for this process. …

Simulation, Measurement, And Emulation Of Photovoltaic Modules Using High Frequency And High Power Density Power Electronic Circuits, Yunas Erkaya

Electrical & Computer Engineering Theses & Dissertations

The number of solar photovoltaic (PV) installations is growing exponentially, and to improve the energy yield and the efficiency of PV systems, it is necessary to have correct methods for simulation, measurement, and emulation. PV systems can be simulated using PV models for different configurations and technologies of PV modules. Additionally, different environmental conditions of solar irradiance, temperature, and partial shading can be incorporated in the model to accurately simulate PV systems for any given condition.

The electrical measurement of PV systems both prior to and after making electrical connections is important for attaining high efficiency and reliability. Measuring PV …

Fluid Analysis In Solar Heat Pipes, Ben Krumholz, Michael Agavo, William Dundon

Mechanical Engineering

Evacuated tube solar collectors are efficient systems that use heat pipes to facilitate heat transfer. They use incoming solar radiation to heat water. Professor Mason Medizade tasked the team with choosing a component of the system to research and test its influence on system performance. The team investigated the working fluid that runs through the heat pipes. Distilled water, acetone, and ethanol at a range of fill volumes form 1 mL to 11 mL were tested. The team's goal was to find a volume for each fluid to maximize performance of the system. Performance was defined as average temperature rise …

Solar Generation's Impact On Fault Current, Kody Heppner

Electrical Engineering

California is paving the road for other states with the capacity of solar installations for residential and commercial entities. The added capacity of solar generation to the state's electric grid has an impact on power flow and fault currents. This project looks at the impact of solar installations on fault currents. Feeders with added residential rooftop solar and larger commercial solar installations may impact the system differently than a large, utility-sized solar installation. This project looks at the impact of both cases on the magnitude of fault current during many different fault types and locations that can occur within a …

Hybrid Sulfur Process For Solar Production Of Hydrogen, John Jacob Isenhower, Katherine Cross Henderson, Nicholas Joseph Eigenbrot

Senior Theses

Lowering dependence on fossil-based fuels has become a major area of focus in research, especially in transportation fuels. One particularly interesting field is that of hydrogen production. Hydrogen is promising because it has the potential to emit no greenhouse gases when used as fuel and is an excellent vessel for energy storage. Because traditional methods for its generation are inefficient and require nonrenewable fuel use, researchers have begun to focus on thermochemical cycles.

Thermochemical cycles are systems that require heat transfer intrinsically and do not consume fossil fuels nor emit greenhouse gases if renewable energy is used for heating. The …

Solar-Powered Hot Tub, Jonathan Peterson, Anthony Zepeda

Electrical Engineering

This paper discusses the design and implementation of a solar-powered hot tub. The concept of this project was to design an independently-operated hot tub powered by a 12V rechargeable battery, charged during the day by a single 400W solar panel. For this purpose, a twenty-year-old name-brand hot tub was purchased, in used condition. The plumbing, AC electrical wiring, and mechanical pumps were all removed and replaced with new components to meet our design specifications. Additionally, a solar water-heater was designed and integrated into the system to directly apply the sun’s heat to water pumped in and out of the tub, …

Integrated Solar Technologies With Outdoor Pedestrian Bridge Superstructure Decking, Richard K. Racz

Masters Theses

Solar technology has been a major topic in sustainable design for many years. In the last five years, however, the solar technology industry has seen a rapid growth in installations and technological advances in cell design. Combined with a rapidly declining overall system cost, the idea of introducing solar technology into a wider range of applications is becoming a focus for engineers and scientists around the world. So many variables which alter solar energy production, such as the sun and surrounding environment, determine whether a solar design is beneficial. This thesis presents a bridge deck surface integrated with solar cells …

Enhanced Solar Photocatalytic Hydrogen Generation And Water Treatment Using Hetero-Structure Photocatalysts, Ghodsieh Malekshoar

Electronic Thesis and Dissertation Repository

Among different approaches to overcome current environmental concerns, heterogeneous photocatalysis is recognized as a promising one. While there are various applications of photocatalysis including water splitting and water treatment, the overall efficiency of this process is still fairly low due to the two dominant drawbacks of current semiconductors, namely wide band gap and fast recombination of photo-generated charges, which restrict the photocatalytic reactions. Designing a hybrid photocatalyst composed of semiconductor hetero-junctions is a viable approach to address these challenges.

The objective of this research project is developing efficient photocatalysts via simple and practical synthesis methods in order to enhance the …

Solar Photovoltaic System Control Topology Investigation For Power Source Mismatch, Lynette O'Callaghan

Conference papers

An investigation into solar photovoltaic (PV) system control topology selection, when partial shade is anticipated in the solar array, is presented. As available area is maximised in Building Integrated PV (BIPV) systems, shading is an inevitable consequence. The presence of partial shading in a PV array leads to multiple power peaks in the power-voltage curve, due to bypass diode sections being triggered, and an increase in module mismatch losses in the array. A building energy design software, Integrated Environmental Solutions, is used to determine the shadowed area on PV modules throughout the year, incorporating the PV system location and geometrical …

Team Uow Solar Decathlon House: Refurbishment Demonstration, Zhenjun Ma, Rui Yan, Massimo Fiorentini, Paul Cooper

Faculty of Engineering and Information Sciences - Papers: Part A

This paper describes a practical demonstration of how to refurbish a typical Australian timber framed fibro house to become a net-zero energy, Solar Decathlon (SD) home. The Team UOW Illawarra Flame House was entered in the SD China 2013 competition and was eventually the overall winner of the competition. The house refurbishment method was illustrated initially through architectural changes to the design of the nominal original house in order to improve functionality, daylighting and natural ventilation. Energy simulations for the original house and the house with the architectural refurbishment were then carried out to determine the thermal envelope retrofit targets …

A Novel Approach For Evaluating The Impact Of Fixed Variables On Photovoltaic (Pv) Solar Installations Using Enhanced Meta Data Analysis Among Higher Education Institutions In The United States, Diane N. De Hoyos

Open Access Theses & Dissertations

The global demand for electric energy has continuously increased over the last few decades. Some mature, alternative generation methods are wind, power, photovoltaic panels, biogas and fuel cells. In order to find alternative sources of energy to aid in the reduction of our nation's dependency on non-renewable fuels, energy sources include the use of solar energy panels. The intent of these initiatives is to provide substantial energy savings and reduce dependence on the electrical grid and net metering savings during the peak energy-use hours.

The focus of this study explores and provides a clearer picture of the adoption of solar …

A High Energy Density Solar Rechargeable Redox Battery, Mohammad Ali Mahmoudzadeh, Ashwin R. Usgaocar, Joseph Giorgio, David L. Officer, Gordon G. Wallace, John D. W Madden

Australian Institute for Innovative Materials - Papers

An integrated solar energy conversion and storage system is presented using a dye sensitized electrode in a redox battery structure. A stable discharge voltage is shown with high areal energy storage capacity of 180 W h cm-2 by choosing iodide/polysulfide as the pair of active materials matched with permeable porous electrodes. The solar rechargeable battery system offers a higher round-trip efficiency and potential cost savings on fabrication compared to individual devices.

A Techno-Economical Appraisal Of A Pv Domestic Plant On A Irish Dwelling, Roberto Sandano

Articles

A comprehensive study of a domestic PV installation is addressed in this paper. A series of economic results are presented for a domestic installation in Ireland.

Towards A Generic Ontology For Solar Irradiance Forecasting, Abhilash Kantamneni

Dissertations, Master's Theses and Master's Reports

The growth of solar energy resources in recent years has led to increased calls for accurate forecasts of solar irradiance for the reliable and sustainable integration of solar into the national grid. A growing body of academic research has developed models for forecasting solar irradiance, identified metrics for comparing solar forecasts, and described applications and end users of solar forecasts.

In recent years, many disciplines are developing ontologies to facilitate better communication, improve inter-operabiity and refine knowledge reuse by experts and users of the domain. Ontologies are explicit and formal vocabulary of terms and their relationships. This report describes a …

Effective Utilization Of Available Pev Battery Capacity For Mitigation Of Solar Pv Impact And Grid Support With Integrated V2g Functionality, Md Jan E Alam, Kashem M. Muttaqi, Danny Sutanto

Faculty of Engineering and Information Sciences - Papers: Part A

Utilizing battery storage devices in plug-in electric vehicles (PEVs) for grid support using vehicle-to-grid (V2G) concept is gaining popularity. With appropriate control strategies, the PEV batteries and associated power electronics can be exploited for solar photovoltaic (PV) impact mitigation and grid support. However, as the PEV batteries have limited capacity and the capacity usage is also constrained by transportation requirements, an intelligent strategy is necessary for an effective utilization of the available capacity for V2G applications. In this paper, a strategy for an effective utilization of PEV battery capacity for solar PV impact mitigation and grid support is proposed. A …

A New Algorithm Of Parameter Estimation Of A Photovoltaic Solar Panel, Mustapha Belarbi, Kamel Haddouche, El-Habib Belarbi, Amine Boudghene-Stambouli

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, we present a new approach for estimating the one-diode model parameters of a photovoltaic solar panel according to the irradiance and temperature. These parameters are given, at a known irradiance and temperature, from the knowledge of three operating points: short circuit, open circuit, and maximum power. In the first step, the adopted approach concerns the resolution of the system of equations constituting the three operating points to write all the model parameters according to series resistance. Secondly, we make an iterative resolution at the optimal operating point by using the Newton--Raphson method to calculate the series resistance …

Ambient Synthesis Of One-/Two-Dimensional Cuagse Ternary Nanotubes As Counter Electrodes Of Quantum-Dot-Sensitized Solar Cells, Xin Qi Chen, Yang Bai, Zhen Li, Lian Zhou Wang, S X. Dou

Australian Institute for Innovative Materials - Papers

2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim. One-/two-dimensional ternary CuAgSe nanotubes (NTs) were successfully prepared from copper selenide (Cu2-xSe) NTs at room temperature within a short reaction time by the facile cation-exchange approach. Cation exchange leads to the transformation of the crystal structure from cubic into orthorhombic and/or tetragonal with good retention of morphology. The exchange reactions are spontaneous owing to large negative changes of the Gibbs free energy. The effects of parameters such as reaction time, precursor source, and precursor ratio on the exchange reaction were investigated. The resultant CuAgSe NTs were explored as counter electrodes (CEs) of …

Photovoltaics: An Investigation Into The Origins Of Efficiency On All Scales, Jeremy Alexander Bannister

Senior Projects Spring 2016

This project is comprised of a set of parallel investigations, which share the common mo- tivation of increasing the efficiency of photovoltaics. First, the reader is introduced to core concepts of photovoltaic energy conversion via a semi-classical description of the phys- ical system. Second, a key player in photovoltaic efficiency calculations, the exciton, is discussed in greater quantum mechanical detail. The reader will be taken through a nu- merical derivation of the low-energy exciton states in various geometries, including a line segment, a circle and a sphere. These numerical calculations are done using Mathematica, a computer program which, due to …

Optimal Energy Management System For A Net Zero Building Using Multi-Agent Systems Approach, Arzhang Ghassemi Pashakalaei

Open Access Theses & Dissertations

Buildings have a significant impact on energy usage and the environment. Much of the research in architectural sustainability has centered on economically advanced countries because they consume the most energy and have the most resources. However, sustainable architecture is important in developing countries, where the energy consumption of the building sector is increasing significantly. The aims of this Thesis are investigating using the hybrid system, which formed by interconnecting two source of renewable energy as solar (PV arrays) and wind (turbine) along with city grid for compensation purposes wherever it is required. In this Thesis, after literature review, we consider …

A Statistical Analysis Of A 4.5 Mw Solar Energy Center, Archit Patnaik

Masters Theses

"This project helps a regional utility evaluate the performance of their 4.5 MW photovoltaic plant. The performance evaluation consists of characterizing the peak and average power and energy output of the plant over varying time periods. A characterization of the output power drops, or dips, is done by performing a statistical analysis of the photovoltaic plant output data. Dips are characterized by dip frequency, depth of dip, energy loss by dip, and dip duration. The results of this study will help the utility to select appropriate voltage regulating equipment on the basis of dip characteristics, and thus, optimize the performance …