Engineering Commons^™

An Integrated Framework For Fostering Human Factor Sustainability And Increased Safety In Aviation Ramp Operations, Sarah M. Hubbard, Denver Lopp

Journal of Aviation Technology and Engineering

The aviation work environment has one of the highest accident rates of any industry sector in the United States, resulting in significant costs for both employee injuries and equipment damage. In fact, injury rates exceed rates found in areas that are widely recognized as hazardous, such as construction and mining, and it is estimated that aircraft ground damage costs are as high as 5 billion to 10 billion dollars per year. Purdue University’s Aviation Technology Department has conducted numerous safety and human factors studies in the past decade encompassing maintenance and repair operations, corporate flight departments, and over ten major …

Mash Tl-4 Crash Testing And Evaluation Of The Restore Barrier, Jennifer D. Schmidt, Tyler L. Schmidt, Ronald K. Faller, Robert W. Bielenberg, John D. Reid, James C. Holloway, Karla A. Lechtenberg

Nebraska Department of Transportation: Research Reports

Three full-scale vehicle crash tests were conducted according to the MASH Test Level 4 (TL-4) safety performance criteria on a restorable and reusable energy-absorbing roadside/median barrier, designated the RESTORE barrier. The system utilized for test nos. SFH-1 through SFH-3 was 240 ft (73.2 m) long with a nominal height of 38⅝ in. (981 mm). The barrier consisted of an upper steel tube rail attached to the top of 20-ft (6.1-m) long x 22.-in. (565-mm) wide precast concrete beams connected with wedge-shaped joints and supported by 11⅝-in. (295-mm) tall rubber posts and steel skids.

In test no. SFH-1, a 5,021-lb (2,277-kg) …

Characterization Of The Separator With Thermal-Shutdown Layer For Use In Lithium Batteries, Li Bai, Yong-Jian Huai, Xin-Ping Ai, Hai Jia

Journal of Electrochemistry

In this paper, the lithium ion battery coated with the thermal-shutdown functional layer has been introduced. The shutdown temperature of the separator could be decreased by using the melting point of thermal-shutdown functional layer. When the internal battery environment reached a critical temperature, the functional layer melted and coated the anode/separator with a non-conductive barrier, halting Li-ion transport and shutting down the cell permanently. The results showed that the functional layer did not affect the resistance, rate performance and cycle life. It was found the functional layer can significantly improve the safety of the battery when misused.

Conceptual Development Of An Impact-Attenuation System For Intersecting Roadways, Joseph G. Putjenter, Robert W. Bielenberg, Ronald K. Faller, John D. Reid

Nebraska Department of Transportation: Research Reports

Longitudinal barriers are commonly used to shield hazards, including stiff bridge rail ends and slopes. In some locations, a secondary roadway intersects the primary roadway within the guardrail’s length-of-need (LON). Some intersections may have as little as 15 ft (4.6 m) between the intersection and beginning of the bridge railing, which require short-radius guardrail systems. One short-radius guardrail system has passed several crash tests under AASHTO Manual for Assessing Safety Hardware (MASH) standards.

Site conditions provided by the Nebraska Department of Roads were used to determine the constraints for a new safety treatment for intersecting roadways and include intersection radii, …

Mgs Dynamic Deflections And Working Widths At Lower Speeds, Nicholas A. Weiland, Cody S. Stolle, John D. Reid, Ronald K. Faller, Robert W. Bielenberg, Karla A. Lechtenberg

Nebraska Department of Transportation: Research Reports

The Midwest Guardrail System (MGS) has been full-scale crash tested in many configurations, including installations adjacent to slopes, with different types of wood posts, with and without blockouts, for culvert and bridge applications, and at high flare rates. Although the performance of the MGS and the dynamic deflection and working width of the barrier have been examined, little is known about the dynamic deflection and working width of the MGS when impacted at lower speeds. The MGS is a relatively low-cost barrier, and the Test Level 3 (TL-3) version could be installed for TL-2 and TL-1 applications. The barrier is …

Evaluation Of The Safety Effectiveness Of Clearview Font And Fluorescent Yellow Sheeting On Michigan Freeways And Non-Freeways, Lusanni Mercedes Acosta Rodrieuez

Masters Theses

Halation or irradiation makes guide sign fonts difficult to read. Missing the necessary guide sign information causes anxiety and confusion to drivers, and hence may lead to crashes. In order to avoid or mitigate the situation a newer font, Clearview, is used to provide better readability at long distances. In a similar context the lack of brightness in sheeting material for warning signs reduces conspicuity of sings. Installation of fluorescent yellow sheeting has been done to provide signs with more noticeable and brighter materials. This observational before and after study is an evaluation of the safety and economic benefits of …

Use Of Roadway Attributes In Hot Spot Identification And Analysis, David R. Bassett

Theses and Dissertations

The Utah Department of Transportation (UDOT) Traffic and Safety Division continues to advance the safety of roadway sections throughout the state. In an effort to aid UDOT in meeting their goal, the Department of Civil and Environmental Engineering at Brigham Young University (BYU) has worked with the Statistics Department in developing analysis tools for safety. The most recent of these tools has been the development of a hierarchical Bayesian Poisson Mixture Model (PMM) of traffic crashes known as the Utah Crash Prediction Model (UCPM), a hierarchical Bayesian Binomial statistical model known as the Utah Crash Severity Model (UCSM), and a …

Fatigue Life Estimation Of Modified Railroad Bearing Adapters For Onboard Monitoring Applications, Alexis Trevino, Arturo A. Fuentes, Constantine Tarawneh, Joseph Montalvo

Mechanical Engineering Faculty Publications and Presentations

This paper presents a study of the fatigue life (i.e. number of stress cycles before failure) of Class K cast iron conventional and modified railroad bearing adapters for onboard monitoring applications under different operational conditions based on experimentally validated Finite Element Analysis (FEA) stress results. Currently, freight railcars rely heavily on wayside hot-box detectors (HBDs) at strategic intervals to record bearing cup temperatures as the train passes at specified velocities. Hence, most temperature measurements are limited to certain physical railroad locations. This limitation gave way for an optimized sensor that could potentially deliver significant insight on continuous bearing temperature conditions. …

Measuring The Effectiveness Of Photoresponsive Nanocomposite Coatings On Aircraft Windshields To Mitigate Laser Intensity, Ryan S. Phillips, Hubert K. Bilan, Zachary X. Widel, Randal J. Demik, Samantha J. Brain, Matthew Moy, Charles Crowder, Stanley L. Harriman, James T. O'Malley Iii, Joseph E. Burlas, Steven F. Emmert, Jason J. Keleher

Journal of Aviation Technology and Engineering

In 2004, pilots reported 46 laser illumination events to the Federal Aviation Administration (FAA), with the number increasing to approximately 3,600 in 2011. Since that time, the number of reported laser incidents has ranged from 3,500 to 4,000. Previous studies indicate the potential for flight crewmember distraction from bright laser light being introduced to the cockpit. Compositional variations of the photoresponsive nanocomposite coatings were applied to an aircraft windscreen using a modified liquid dispersion/heating curing process. The attenuating effects of the deposited films on laser light intensity were evaluated using an optical power meter and the resultant laser intensity data …

The Implications Of Self-Driving Cars On Insurance, Amanda Lobello

Honors Projects in Mathematics

Self-driving cars, also known as autonomous vehicles, are being researched and tested by automakers, technology industry leaders, and other institutions. Lawmakers and politicians are discussing the legislation that will affect the fate of such technology. Primary benefits include safety, mobility, free time, less traffic, and green effects. However, there are also obstacles to the implementation of self-driving vehicles including consumer acceptance, legal liability, and cost. With the potential shift in responsibility from driver to automaker, rating factors for insurance may change, weighing more heavily on the model of the car as a factor. The fate of auto insurance is in …

Lateral Control Of A Vehicle Platoon, Samuel A. Mitchell

Undergraduate Honors Capstone Projects

Multiple lateral control systems are analyzed for use in a vehicle platoon system. In order to ensure the safety of the vehicle platoon, the system must operate under three constraints: (1) accurate path following, (2) string stability, and (3) functionality in the presence of noise. Computer simulations are employed to analyze candidates according to the safety requirements. Actual vehicle kinematics and nonlinearities - limits on turn radius, velocity, and acceleration - are included in this analysis.

Successful control system candidates are implemented in a platoon of five differential-steer vehicles. The sensing and communication requirements of the control system are discussed. …

Benefits Of A State Driveway Database With Qualitative And Quantitative Crash Analysis, Andrew Bryant Stokes

All Theses

The primary goal of this research is to show how a fully developed driveway database will improve access management practices resulting in a reduction in crashes, injuries, and fatalities on our roadways. The results of this thesis highlight a close relationship between driveway characteristics and the incidence of crashes. Thus, it is critical to be proactive in enforcing access management strategies and policies that are designed to enhance driveway safety without compromising the economic vitality of land use along roads. The analysis identified several significant independent variables that influence crash rates either positively or negatively. The data driven approach to …

Creating A National Coalition To Address Tractor Overturn Fatalities., Pamela J. Tinc, Paul D. Ayers, John J. May, Mark A. Purschwitz, Julie A. Sorensen

Biosystems and Agricultural Engineering Faculty Publications

Tractor overturns continue to be the leading cause of death on U.S. farms. While rollover protective structures (ROPS) are effective in preventing these fatalities, they are underutilized due to a number of barriers. Past programs in the U.S. and abroad have targeted this area of agricultural safety; however, a national program is not yet in place for U.S. farmers. This study seeks to build a national partnership to address tractor overturn fatalities by increasing the number of tractors with ROPS. A diverse, multisector steering committee has been organized and is working together using Whole System in a Room methods. This …

A Critical Realist Approach To Engineering Ethics, Eddie Conlon

Conference papers

This paper is focused on the teaching of engineering ethics (EE). Through a focus on safety and the lens of what sociologists call the agency/ structure relationship it examimes various approaches to this teaching. Drawing on Critical Realism it argues there are deficiencies in both the dominant approach and a number of proposed alternatives as they suffer from various forms of conflationism . By drawing on Critical Realism (CR) a more robust agenda for teaching engineering ethics can be developed. It is argued that CR offers a basis for understanding the range of factors which lead to accidents and disasters. …

Safety Culture Monitoring: A Management Approach For Assessing Nuclear Safety Culture Health Performance Utilizing Multiple-Criteria Decision Analysis, James Harold Warren Jr.

Engineering Management & Systems Engineering Theses & Dissertations

Nuclear power plants are among the most technologically complex of all energy facilities. This complexity reflects the precision needed in design, maintenance and operations to harness the energy of the atom safely, reliably and economically. Nuclear energy thus requires consistent, high levels of organizational performance by the highly skilled professionals who operate and maintain nuclear power plants (Nuclear Energy Institute [NEI], 2014, p. 1).

A key element for achieving consistent, high levels of performance in a nuclear organization is its safety culture. Nuclear safety culture is for an organization what character and personality is for an individual: a feature that …