Engineering Commons^™

Model Fusion: A New Approach To Processing Heterogeneous Data, Omar Ochoa

Open Access Theses & Dissertations

In many practical situations, it is necessary to extract

information from data of different types. For example, in geosciences, several sources of data can be used to determine the interior structure of the earth: the first arriving waves from earthquakes and from man-made sources, measurements of the earth's gravity field, measurements of the dispersion of surface waves generated by earthquakes, etc. At present, most existing data processing techniques deal only with data of one type.

A joint use of all the information derived from multiple types of data sources is an important theoretical and practical challenge. Such a joint use …

Novel Copper (Ii) Mediated Transfection Nano-Systems And Biological Properties Of Pyridinium Surfactants, Sarit Pal

Open Access Theses & Dissertations

Efficacy of gene therapy is relied upon the improvement of gene delivery vectors into mammalian cells. Although viral-based polynucleotide carriers are still considered as the most common method for gene delivery but the cost effectiveness, nonspecific lethal immune response has evoked the renaissance of non-viral synthetic delivery systems. An initial discovery by Felgnar et al showed Cationic Liposomes (CLs) (having an overall positive charge) when mixed with DNA to form CL-DNA complexes can enhance the transfer of polynucleotides into cells followed by its expression. Presently, a flurry of experimental works is taking place for the better understanding of structural characterization …

Design Of A Biomass-To-Biorefinery Logistics System Through Bio-Inspired Metaheuristic Optimization Considering Multiple Types Of Feedstocks, Isidoro Trueba

Open Access Theses & Dissertations

Bioenergy has become an important alternative source of energy to alleviate the reliance on petroleum energy. Bioenergy offers significant potential to mitigate climate change by reducing life-cycle greenhouse gas emissions relative to fossil fuels. The Energy Independence and Security Act mandate the use of 21 billion gallons of advanced biofuels including 16 billion gallons of cellulosic biofuels by the year 2022. It is clear that Biomass can make a substantial contribution to supplying future energy demand in a sustainable way. However, the supply of sustainable energy is one of the main challenges that mankind will face over the coming decades. …

Investigation Into The Operation And Safety Of Freeway Auxiliary Lanes: Towards Uniform Design Guidelines, Yubian Wang

Open Access Theses & Dissertations

Freeways operate closest to the purest form of uninterrupted traffic flow. There is no constant interruption to traffic flow (such as stop sign and traffic signal), and access is limited to ramp locations. Therefore, at freeways, bottlenecks, if exist, are usually caused by merging and diverging traffic at ramp locations. Bottleneck removal at freeway ramp areas can reduce average freeway commuter delay. Currently, engineers may add auxiliary lanes at ramp areas to mitigate or remove bottlenecks.

The American Association of State Highway Transportation Officials (AASHTO) publication A Policy on Geometric Design of Highways and Streets, commonly known as the "Green …

A Method To Reduce Plastic Shrinkage Cracking Of Concrete Using Re-Vibration Technique, Mustafa Abushaala Aldalinsi

Open Access Theses & Dissertations

One of the problems that reduce durability; thus, performance of concrete is the development of plastic shrinkage cracking (PSC). Traditionally, the development of PSC has been minimized by controlling its exposure to weather conditions or by adding fibers. In this study, concrete re-vibration was used as an alternative technique to control PSC because of the limited availability of fibers in the developing countries. In this study, the wait time after slab casting and before vibration was selected to be 90 minutes while length of re-vibration time was varied from 15 to 45 seconds. Also, the water-cement ratios were selected to …

Method Development For A Chemical And Biological Analysis Of Glucocorticoids In Wastewater, Maria Carmen Lozano

Open Access Theses & Dissertations

Glucocorticoids are a class of steroid hormones that can either be produced synthetically or naturally by the adrenal glands. The synthetic glucocorticoids are highly prescribed in the United States for their anti-inflammatory and immunosuppressive properties to treat a variety of ailments and diseases; however, these have been implicated in a number of adverse human conditions such as obesity, metabolic syndrome, immune-suppression, delayed puberty, adrenal insufficiency and Cushing Syndrome, among others. Ongoing research has shown that synthetic and natural hormones are transported to aquatic environments via mammalian excretion or wastewater effluent, and as a result, the release of glucocorticoids into the …

Experimental Study On The Fabrication Of Advanced Materials For Energy Applications Using High Energy Mechanical Milling, Ashvin Kumar Narayana Swamy

Open Access Theses & Dissertations

The reaction of aluminum (Al) powder with water has the potential for on demand hydrogen generation. Conventional Al powders, however, react with water slowly due to a highly protective oxide layer on the particle surface. Current methods for Al activation involve harmful and expensive materials. The nano-scale Al powders also remain very expensive and have problems such as a large amount of oxide on the surface. The use of aluminum in an energy generation cycle is also hindered by the fact that, although Al is the most abundant metal in the Earth's crust, its recovery from ore consumes a lot …

The Standardization Of Printable Materials And Direct-Write Systems, Jessica Lynn Porras

Open Access Theses & Dissertations

The standardization of Printable Materials and Direct-Write Systems addresses the many areas of Printing Nano Engineering that lack standards. Printing Nano Engineering is a new method of manufacturing electronics that utilize direct-write system with printing principles to manufacture electronic components.

Standards need to be developed for the different direct-write systems and printable materials in order to provide compatibility amongst printed electronics and to allow the optimization for direct-writ s e systems, and printable materials associated with these systems. There are many different types of direct-write systems in industry; each system involves different methods for printing that incorporates the limiting parameters …

Surface Plasmon Polaritons And Waveguide Modes At Structured And Inhomogeneous Surfaces, Javier Polanco

Open Access Theses & Dissertations

In chapter 1, properties of a p-polarized surface plasmon polariton are studied, propagating circumferentially around a portion of a cylindrical interface between vacuum and a metal, a situation investigated earlier by M. V. Berry (J. Phys. A: Math. Gen. 8, (1975) 1952). When the metal is convex toward the vacuum this mode is radiative and consequently is attenuated as it propagates on the cylindrical surface. An approximate analytic solution of the dispersion relation for this wave is obtained by an approach different from the one used by Berry, and plots of the real and imaginary parts of its wave number …

Manufacturing Nerve Guidance Conduits By Stereolithography For Use In Peripheral Nerve Regeneration, Mireya Aidee Perez

Open Access Theses & Dissertations

Nerve regeneration techniques have been studied in great depth in recent years. Peripheral nerve injuries, in particular, can be caused by accidents, falls, athletic injuries, etc. Current methods of repair include direct suturing of the 2 injured nerve ends or the use of autografts, when a nerve section is taken from another area of the body. Both methods have a series of limitations which have led researchers to study alternative methods of repair. Nerve guidance conduits may provide a viable solution because they can be modified and adapted to the patient's needs. Some conduits already exist on the market and …

Thermal Barrier Coatings (Tbc's) For High Heat Flux Thrust Chambers, Christopher Michael Bradley

Open Access Theses & Dissertations

The last 30 years materials engineers have been under continual pressure to develop materials with a greater temperature potential or to produce configurations that can be effectively cooled or otherwise protected at elevated temperature conditions. Turbines and thrust chambers produce some of the harshest service conditions for materials which lead to the challenges engineers face in order to increase the efficiencies of current technologies due to the energy crisis that the world is facing. The key tasks for the future of gas turbines are to increase overall efficiencies to meet energy demands of a growing world population and reduce the …

Development And Testing Of An Ignition Physics Test Facility And An Oxygen/Methane Swirl Torch Igniter, Jesus Roberto Flores

Open Access Theses & Dissertations

There are many advantages to LOX/methane propulsion, such as in-situ resource utilization from Mars and the Moon, and simplicity of ground operations due to its non-toxic nature. There exists a lack of fundamental understanding of the ignition physics, and flame characteristics of these propellants when related to rocket propulsion, which has created undesirably long design cycles and flight hardware that is not optimized. Motivated by these issues, a study of the ignition physics of a shear coaxial injector is proposed, in which the flow field dynamics and ignition transients will be observed through a visually accessible combustion chamber. The main …

Microstructure And Properties For Titanium Aluminide Superalloy Prototypes Fabricated By Electron Beam Melting And Thermally Processed, Jennifer Hernandez

Open Access Theses & Dissertations

Gamma TiAl has been considered to be an ideal replacement for Ni-base superalloy aerospace applications, particularly in weight-critical applications. While bulk, fully dense gamma-TiAl is 50% less dense than Ni-base superalloys, it also has excellent mechanical properties at high temperature (up to ~800°C). Pre alloyed (Ti-48Al-2Cr-2Nb) powder was used to fabricate solid, fully dense (3.85 g/cm3) components and foam components with densities ranging from 0.33 g/cm³ to 0.46 g/cm³ by electron beam melting (EBM). A 10:1 blend of 2-phase TiAl (Ti-48Al-2Cr-2Nb in ^a/_o) : Inconel 625 (Ni-22Cr-6Mo-2Nb in ^a/_o) pre-alloyed powders produced …

A Damage-Trap Interfacial Design To Improve Impact Resistance Of Polymers, Md Shariful Islam

Open Access Theses & Dissertations

Polymer materials such as Polycarbonate (PC), Polymethyl methacrylate (PMMA) have numerous applications in transparent armor which includes body and face shield, helmet, windows of the armored vehicle etc. The most challenging part of these applications is to ensure the safety of the people. These materials are often subjected to impact loading, so it is important to study the failure of these materials under impact loading. An experimental study has been made to investigate the impact damage in transparent layered materials. Impact experiments were carried out on various monolithic specimens and layered specimens for both two types of materials at different …

Development Of A Thermal Imaging Feedback Control System In Electron Beam Melting, Emmanuel Rodriguez

Open Access Theses & Dissertations

The Electron Beam Melting (EBM) process is a promising technology in the rapid manufacturing of metal components. EBM has the potential to reduce the cost of metal parts by minimizing the use of raw materials and machining time. The EBM technology has several advantages over other additive manufacturing (AM) technologies of metal, such as manufacturing speed and mechanical properties of the finished parts. For the process to be accepted in the aerospace industry as a flight-ready manufacturing technology, however, improved control and feedback must be implemented in the building process for better part quality and uniform production in manufacturing. As …

Inkjet Based Personalized Screening Platform For Cancer Therapy, Jorge Ivan Rodriguez

Open Access Theses & Dissertations

The new paradigm of personalized medicine is beginning to affect clinical practice. In particular, many of the advances in genomics and proteomics have made personalized screening and therapeutic inventions possible. On chip, cellomics approaches to screening and intervention are becoming more commonplace. Cancer therapies may benefit from the rise in `-omics' technologies. In addition, the availability of rapid screening data is crucial to mitigate cancer propagation and increase the possibility of patient recovery. This study is an endeavor to develop a cellomic anticancer drug screening process based on inkjet printing. Previous research has demonstrated that inkjet based screening can reliably …

Structure And Electronic Properties Of Pure And Nitrogen Doped Nanocrystalline Tungsten Oxide Thin Films, Vemnkata Rama Sesha Ravi Kumar Vemuri

Open Access Theses & Dissertations

Tungsten oxide (WO₃) is a multifunctional material which has applications in electronics, sensors, optoelectronics, and energy-related technologies. Recently, electronic structure modification of WO₃ to design novel photocatalysts has garnered significant attention. However, a fundamental understanding of nitrogen induced changes in the structure, morphology, surface/interface chemistry, and electronic properties of WO₃ is a prerequisite to producing materials with the desired functionality and performance. Also, understanding the effect of thermodynamic and processing variables is highly desirable in order to derive the structure-property relationships in the W-O/W-O-N material system. The present work was, therefore, focused on studying the effects …

Printable Biodegradable Hydrogel For Skin Wound Dressing Using Inkjet Printing Technology, Maria G. Yanez

Open Access Theses & Dissertations

Chronic wounds are becoming more frequent. Foot ulcers affect approximately 10% - 15% of patients with diabetes throughout their lifetimes, and by 2025, it is estimated the prevalence of diabetes will be 250 million people in the worldwide. There is increased potential for patients with peripheral neuropathy and peripheral vascular disease to suffer more foot injuries. These conditions reduce the normal pain sensations and healing of minor traumas, allowing the development of chronic non-healing ulcers, often preceding lower-extremity amputation. These types of wounds are very difficult to treat and sometimes take months or even years to heal because of many …

Prediction Of Foreign Object Debris/Damage (Fod) Type For Elimination In The Aeronautics Manufacturing Environment Through Logistic Regression Model, Natalia V. Espino

Open Access Theses & Dissertations

Foreign Object Debris/Damage (FOD) is a costly and high-risk problem that aeronautics industries such as Boeing, Lockheed Martin, among others are facing at their production lines every day. They spend an average of $350 thousand dollars per year fixing FOD problems. FOD can put pilots, passengers and other crews' lives into high-risk. FOD refers to any type of foreign object, particle, debris or agent in the manufacturing environment, which could contaminate/damage the product or otherwise undermine quality control standards. FOD can be in the form of any of the following categories: panstock, manufacturing debris, tools/shop aids, consumables and trash. Although …

Attitude Towards Green Warehousing In El Paso, Texas: An Exploratory Analysis, Lynda Jeanette Macias

Open Access Theses & Dissertations

The increasing reliance on fossil fuels by today's emerging economies has a profound implication on the sustainability of many warehousing and distribution logistical systems worldwide. This research attempts to fill the gap in current green warehousing literature by investigating how warehousing and distribution facilities view greener strategies as a way to increase operation efficiency through a stated preference approach. A survey instrument was developed, and the survey was conducted to identify warehousing characteristics, green practices, and current green views of warehouse managers in El Paso, Texas. The survey results found a balanced outlook within the environment and business needs. Companies …

Microstructure And Mechanical Properties Of Titanium Nitride Optical Coatings Made By Dc Magnetron Sputtering, Gustavo Martinez

Open Access Theses & Dissertations

Titanium nitride (TiNx) thin films were grown by DC (Direct Current) magnetron sputtering method onto Si(100) substrates by varying time of deposition to produce films with variable thickness (dTiN) in the range of 20-120 nm. The grown TiNx films were characterized by studying their structure, composition, and mechanical properties. Nuclear reaction analysis (NRA) combined with Rutherford backscattering spectrometry (RBS) analyses indicate that the grown films were stoichiometric TiN. Grazing incidence X-ray diffraction (GIXRD) measurements indicate that the texturing of the TiN films changes as a function of dTiN. The (111) and (002) peaks appear initially; with increasing dTiN, (111) becomes …

The Development Of Self-Supported Electromechanical Structures Using Fused Deposition Modeling, Jorge Ramos-Almeida

Open Access Theses & Dissertations

Recent research has focused on the fabrication freedom of 3D printing to create not only conceptual models but also final end-use products. In the last decade, several research groups have reported embedding electronic components and electrical interconnects into 3D printed structures during process interruptions; however, to date there is an absence of fabricated devices with electromechanical functionality for parts fabricated in a single Additive Manufacturing (AM) build sequence.

The focus of this research is the use of Fused Deposition Modeling (FDM) to manufacture a self-supported electromechanical motor. FDM is an AM process capable of building parts in a layer-by-layer fashion. …

A Hybrid Modelling Approach For Maintenance And Rehabilitation Treatment Effectiveness Of Asphalt Pavements In Texas, Daniel Saenz

Open Access Theses & Dissertations

Analysis tools in pavement management systems are critical to assist transportation agencies in developing the most adequate maintenance and rehabilitation program. The significant elements are not only the type of treatment selected and its cost, but also the quantification of its short-term and long-term effectiveness and the timing of intervention. Methodologies with complex statistical approaches and performance model theories have been previously implemented in their derivation, but they may not be suitable or accurate. Therefore, it is imperative to factor in engineering experience in their assessment. In this thesis, a hybrid modelling approach was presented to systematically introduce expert knowledge …

Dielectric And Complex Impedance Properties Of Tetravalent Hafnium (Hf 4+) Integrated Cobalt Ferrite, Luis Javier Sanchez

Open Access Theses & Dissertations

The work presented in this thesis was carried out to understand the effects of tetravalent hafnium (Hf4+) ion on the crystal structure and phase, surface morphology, electrical, dielectric and complex impedance properties of cobalt ferrite (CoFe2O4; CFO). Hafnium incorporated cobalt ferrite, CoFe2-xHfxO4, with x = 0.00, 0.05, 0.075, 0.10, 0.15 and 0.20 were prepared by the standard solid state ceramic synthesis method. X-ray diffraction (XRD) and scanning electron microscopy (SEM) characterizations were performed to determine the structural properties. Most important aspect of this study is to explore the dielectric and complex impedance properties as a function of variable temperature (T=300-1000 …

Portraits Of Success: A Mixed-Method Study Of The Enrollment, Persistence, And Success Experiences Of Female Graduate Engineering Students At A Hispanic Serving Institution, Sandra Aguirre-Covarrubias

Open Access Theses & Dissertations

The current study addresses the underrepresentation of female graduate engineering students. Specifically, its purpose was to gain insight on how enrollment, persistence, and success factors are experienced by female graduate engineering students at a Hispanic Serving Institution located on the U.S.-Mexico border. The topic of underrepresentation of female graduate engineering students is important for higher education practitioners because in spite of the numerous attempts to increase their enrollment in science, technology, engineering and mathematics, their underrepresentation has persisted. The current study is modeled after research conducted by Cordova-Wentling and Camacho (2006). The research question that guides the current study is: …

Determinants Of Neighborhood Exposure To Extreme Heat: A Spatial Examination Of El Paso And Juárez, 2010, Faraj Mohamad Aboargob

Open Access Theses & Dissertations

Numerous studies have been conducted on the modification of local weather by the urban environment. In studying urban environmental effects on the urban heat island (UHI), researchers have investigated influences such as land use, vegetation density, topography, population density, and neighborhood socioeconomic status. Many studies have used data collected from field observations, while other studies relied solely on computer modeling. This Dissertation research used a spatial analysis approach, which has been less widely employed, to investigate neighborhood level biophysical, built environmental and socio-demographic determinants of the El Paso and Juárez UHI. The research utilized inexpensive data obtained from US and …

Preparation Of Cobalt/Nickel Molybdenum Sulfide Catalysts Supported By Aqueous Media Soluble Multi-Wall Carbon Nanotubes., Hassan Ahmad Bleibel

Open Access Theses & Dissertations

Multi-walled carbon nanotubes (MWCNTs) have been subjected to chemical treatment in order to introduce hydrophilic functional groups on their surfaces. These covalently bonded groups did enhance the solubility of MWCNTs in aqueous media as expected. Functionalized MWCNTs were characterized using FTIR, Raman spectroscopy, TGA, X-ray diffraction, dispersion test and TEM. Then, functionalized MWCNTs were incorporated in the hydrothermal synthesis method of transition metal sulfide catalysts (CoMo, NiMo, and Ethylenediamine-CoMo Sulfides). Catalysts were characterized using X-ray diffraction, TEM, SEM, N2 Gas adsorption-desorption, elemental analysis, and Hydrodesulfurization (HDS) reaction of dibenzothiophene (DBT). The objective was to study the functionalized MWCNTs' effect; being …

Development Of A New Genetic Algorithm To Solve The Feedstock Scheduling Problem In An Anaerobic Digester, Ana Cram

Open Access Theses & Dissertations

Genetic Algorithm

Scheduling

Anaerobic digester

Investigation Of The Radiative Heat Release Factor Of Premixed Oxy-Syngas Flames, Martin De La Torre

Open Access Theses & Dissertations

A significant part of the United States is being powered by combustion devises relying on coal since it is abundant and is a high emitting source of electricity per unit energy, however; the burning of this fuel is responsible for a significant contribution for the pollutant emissions causing global warming. Because coal is one of the main sources of energy in the U.S. and around the globe, the scientific community has been investigating ways to meet current and future governmental emission requirements. It is now well established that radiating heat from the flame is a major contributor of the heat …

Assessment And Evaluation Of The Dynamic Behavior Of Muscles With Special Reference To Subjects With Diabetes Mellitus, Jorge Garza-Ulloa

Open Access Theses & Dissertations

Diabetes mellitus (simply diabetes) is a group of metabolic diseases in which a person has high blood sugar, either because the body does not produce enough insulin, or because cells do not respond to the insulin that is produced. Each year, the costs of diabetes rise. Diabetes and its complications cost our national economy. Two new methods are proposed to measure the diabetes implications in the muscles of lower body: Muscle energy expenditure analysis based on the detection of muscle transition-to-fatigue, and Natural Fuzzy logic method for differential analysis in muscle/joint. Then the results are compared with the traditional method …