Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 10 of 10
Full-Text Articles in Engineering
Micro-Mechanical Analysis Of Corrosion Products Formed During Long-Term Carbonation Induced Corrosion Of Steel, Marijana Serdar, Dubravka Bjegovic, Valérie L’Hostis, Stéphane Poyet, Damien Féron
Micro-Mechanical Analysis Of Corrosion Products Formed During Long-Term Carbonation Induced Corrosion Of Steel, Marijana Serdar, Dubravka Bjegovic, Valérie L’Hostis, Stéphane Poyet, Damien Féron
International Conference on Durability of Concrete Structures
During corrosion distinct types of corrosion products form, composed of different ratios of ferrous ions and oxide, hydroxides. Corrosion products have different physical and mechanical properties, mainly density, resistivity, volume and modulus of elasticity compared to iron. Knowing properties of corrosion products is indispensable for service life modelling of structures and can give valuable insight into the long-term corrosion propagation process. In this study micro-indentation method was used to evaluate mechanical properties of different layers formed during long-term carbonation induced corrosion of steel in concrete. Investigation was performed on three sets of reinforced concrete samples, that underwent corrosion during 50, …
Load-Bearing Capacity Of Corroded Reinforced Concrete Structures Caused By Carbonation And Exposed To Xc4, Esko Sistonen
Load-Bearing Capacity Of Corroded Reinforced Concrete Structures Caused By Carbonation And Exposed To Xc4, Esko Sistonen
International Conference on Durability of Concrete Structures
Concrete corrosion can be visualized as a combination of chemical reaction on concrete and electrochemical reaction on steel reinforcement. Failure of steel reinforcement due to corrosion can inflict significant stress on concrete during load distribution. As such, it is necessary to analyse the long-term effects of corrosion on the load bearing capacity and bending strength of steel reinforcement. This research investigated the mechanical and electrochemical properties of concrete exposed to long-term corrosion for a period of 16 years. Non-destructive testing like crack width measurements, visual examination, electrochemical measurements using Galva Pulse and determination of average chloride content were undertaken to …
Influence Of Cracks On The Carbonation Resistance Of Concrete Structures, Abbas Al-Ameeri Mr., Muhammed Imran Rafiq Dr., Orania Tsioulo Dr.
Influence Of Cracks On The Carbonation Resistance Of Concrete Structures, Abbas Al-Ameeri Mr., Muhammed Imran Rafiq Dr., Orania Tsioulo Dr.
International Conference on Durability of Concrete Structures
Carbonation-induced corrosion of steel rebar embedded in concrete is one of the major issues influencing durability of reinforced concrete structures. It has been acknowledged that structural cracks in concrete influences the carbon dioxide (CO2) diffusivity and accelerates the carbonation-induced reinforcement corrosion, however most of the previous studies on the carbonation induced corrosion have concentrated on the un-cracked / unloaded concrete. This study investigates the impact of cracks caused by loading on the depth of carbonation into concrete. Concrete prisms (100x100x500 mm) were subjected to four different crack widths (0, 0.05-0.15 mm, 0.15-0.25 mm and 0.25-0.35 mm) and the …
Climate Resilient Concrete Structures In Marine Environment Of Bangladesh, Sudarshan Srinivasan, Ian Gibb
Climate Resilient Concrete Structures In Marine Environment Of Bangladesh, Sudarshan Srinivasan, Ian Gibb
International Conference on Durability of Concrete Structures
Bangladesh has a vast coastal infrastructure seriously affected by climate change and associated extreme environmental conditions. The rural construction sector in Bangladesh will be undergoing rapid growth in the next 10 years through rural infrastructure development programmes funded by the Asian Development Bank and the World Bank. The Local Government Engineering Department (LGED in Bangladesh), owns the rural concrete infrastructure, maintains around 380, 000 linear metres of concrete bridges or culverts in the rural coastal areas and are planning to build more than 200,000 linear metres during the next ten years. In order to design and construct durable concrete structures …
New Model For Natural Carbonation Prediction In Reinforced Concrete – Concept And Validation On Chemical Admixtures, Stephen O. Ekolu, M Raats
New Model For Natural Carbonation Prediction In Reinforced Concrete – Concept And Validation On Chemical Admixtures, Stephen O. Ekolu, M Raats
International Conference on Durability of Concrete Structures
A new model for prediction of natural carbonation in reinforced concrete structures has recently been developed and presented in (Ekolu, 2018). For brevity, the model is referred to as ESS model. It employs concrete strength as the primary property depicting core carbonation behaviour of any given concrete while other factors induce secondary influence. Chemical admixtures in concrete significantly influence concrete behaviour. Using experimental data from the literature (Dan-Herrera et al., 2015), the model behaviour is verified under use of various types of chemical admixtures of concrete including internal curing, shrinkage reducing, viscosity modifying, and high range water reducing admixtures. Class …
Performance Of Concrete Made With A Calcined Clay – Limestone-Portland Cement Exposed To Natural Conditions, Fernando Martirena, Ernesto Díaz, Dayran Rocha, Hamed Maraghechi, Karen Louise Scrivener
Performance Of Concrete Made With A Calcined Clay – Limestone-Portland Cement Exposed To Natural Conditions, Fernando Martirena, Ernesto Díaz, Dayran Rocha, Hamed Maraghechi, Karen Louise Scrivener
International Conference on Durability of Concrete Structures
This work presents the results of an investigation carried out to assess durability of concrete made with a calcined clay- limestone-Portland cement with 47% of clinker, hereafter named LC3, produced during an industrial trial in 2013. LC3 was used to cast concrete blocks and later expose them at a natural location at the northern coast of Cuba. Reference concrete was cast with Cuban Portland cement having 88% of clinker. Throughout three years (2015, 2016, 2017) concrete cores were systematically taken and the specimens were subjected to a testing program that included Formation factor, chloride profiling, surface resistivity, air permeability and …
Progress Of Carbonation In Chloride Contaminated Concretes, Yaocheng Wang, P. A.M. Basheer, S. Nanukuttan, Y. Bai
Progress Of Carbonation In Chloride Contaminated Concretes, Yaocheng Wang, P. A.M. Basheer, S. Nanukuttan, Y. Bai
International Conference on Durability of Concrete Structures
Concretes used in marine environment are generally under the cyclic effect of CO2 and chloride ions (Cl-). To date, the influence of carbonation on ingress of chloride ions in concretes has been widely studied; in comparison, study on the influence of Cl- on the progress of carbonation is limited. During the study, concretes were exposed to independent and combined mechanisms of carbonation and chloride ingress regimes. Profiles of apparent pH and chloride concentration were used to indicate the progress of carbonation and ingress of Cl- in concretes. From the apparent pH profile, a carbonation front …
Corrosion Of Steel In Concrete And Its Prevention In Aggressive Chloride-Bearing Environments, Luca Bertolini, Maddalena Carsana, Matteo Gastaldi, Federica Lollini, Elena Redaelli
Corrosion Of Steel In Concrete And Its Prevention In Aggressive Chloride-Bearing Environments, Luca Bertolini, Maddalena Carsana, Matteo Gastaldi, Federica Lollini, Elena Redaelli
International Conference on Durability of Concrete Structures
This keynote paper deals with the durability of reinforced concrete (RC) structures exposed to aggressive environments characterized by high concentration of chloride ions, namely, marine environments or the use of de-icing salts. The mechanism of chloride-induced corrosion of steel in concrete is introduced, and its influence on the service life of RC structures is analyzed. Factors affecting the time to corrosion initiation are described with regard to both concrete properties and environmental exposure conditions. Design approaches available for achieving durability targets associated with the design service life are analyzed, focusing on studies carried out by the authors in recent years …
Experimental Study On Carbonation Of Steel Fiber Reinforced Concrete, Yan Wang, Ditao Niu, Zhenping Dong
Experimental Study On Carbonation Of Steel Fiber Reinforced Concrete, Yan Wang, Ditao Niu, Zhenping Dong
International Conference on Durability of Concrete Structures
With the steel fiber reinforced concrete (SFRC) used more and more widely in some large-span structures, large tunnel linings, dam structures, military engineering, and some other major projects, its durability arouses more and more concerns. In this paper carbonation test of SFRC was conducted. The rule for the mixing amount of steel fiber (0, 0.5, 1.0, 1.5, and 2.0%) to affect the carbonation depth of concrete and the strength developing rule of SFRC after carbonation test were researched. To analyze the property change rules from micro perspective of SFRC after carbonation, the pore structure of SFRC after carbonation was tested. …
Co2 Sequestration In Cement-Based Materials During Mixing Process Using Carbonated Water And Gaseous Co2, Jacek Kwasny, P. A. Muhammed Basheer, Mark I. Russell, William Doherty, Kieran Owens, Neil Ward
Co2 Sequestration In Cement-Based Materials During Mixing Process Using Carbonated Water And Gaseous Co2, Jacek Kwasny, P. A. Muhammed Basheer, Mark I. Russell, William Doherty, Kieran Owens, Neil Ward
International Conference on Durability of Concrete Structures
This paper presents selected findings from a recently completed research project, aimed at the investigation of CO2 sequestration in cement-based materials during the early stages of hydration when the cement paste is being mixed. Portland cement pastes were carbonated during the mixing process, using both carbonated water and gaseous CO2, and their properties were compared to the control non-carbonated mix. All mixes were prepared in a purpose-designed chamber that permitted carbonated water and gaseous CO2 to be mixed with the cementbased materials during the mixing process, without losses of CO2 to the external environment. Temperature …