Engineering Commons^™

Biogeography-Based Optimization, Daniel J. Simon

Electrical and Computer Engineering Faculty Publications

Biogeography is the study of the geographical distribution of biological organisms. Mathematical equations that govern the distribution of organisms were first discovered and developed during the 1960s. The mindset of the engineer is that we can learn from nature. This motivates the application of biogeography to optimization problems. Just as the mathematics of biological genetics inspired the development of genetic algorithms (GAs), and the mathematics of biological neurons inspired the development of artificial neural networks, this paper considers the mathematics of biogeography as the basis for the development of a new field: biogeography-based optimization (BBO). We discuss natural biogeography and …

Electrodeposition Of Nickel Nanowires And Nanotubes Using Various Templates, Asli Ertan, Surendra N. Tewari, Orhan Talu

Chemical & Biomedical Engineering Faculty Publications

Nickel nanotubes and nanowires are grown by galvanostatic electrodeposition in the pores of 1000, 100, and 15 nm polycarbonate as well as in anodised alumina membranes at a current density of 10 mA cm-2. The effects of pore size, porosity, electrodeposition time, effective current density, and pore aspect ratio are investigated. Nickel nanotube structures are obtained with 1000 nm pore size polycarbonate membrane without any prior treatment method. At the early stages of electrodeposition hollow nickel nanotubes are produced and nanotubes turn into nanowires at longer depositon times. As effective current density accounting for the membrane porosity decreases, the axial …

An Object-Oriented Approach For Modeling And Simulation Of Crack Growth In Cyclically Loaded Structures, D. Cojocaru, Anette M. Karlsson

Mechanical Engineering Faculty Publications

We present an object-oriented modeling frame for simulating crack propagation due to cyclic loadings. Central to the approach is that the crack propagates when a user-defined propagation criterion is fulfilled, i.e., the crack propagation rate is not prescribed but predicted. The approach utilizes the commercial finite element software package ABAQUS and its associated Python based scripting interface. The crack propagation is simulated by a generalized node release technique. If the propagation criteria are satisfied in the end of a cycle, the crack is allowed to propagate. The incremental crack growth is inferred from an iterative investigation of the propagation criteria. …

Micromechanics Model Based On The Nanostructure Of Pfsa Membranes, Ahmet Kusoglu, Michael H. Santare, Anette M. Karlsson, William B. Johnson, Simon Cleghorn

Mechanical Engineering Faculty Publications

A micromechanics model is developed to predict Young’s modulus of perfluorosulfonic acid (PFSA) membranes at various temperatures and water contents. The morphology of PFSA membranes is characterized by a two-phase structure, where hydrophilic clusters expand to hold water molecules during swelling, whereas the hydrophobic polymer network maintains the structural stability. A representative volume element (RVE) is proposed based on the descriptions for the nanostructure of PFSA membranes available in the literature. On the basis of mechanics model, we estimate Young’s modulus in tension of PFSA membranes as a function of water volume fraction for various temperatures. The results show that …

On Control System Design For The Conventional Mode Of Operation Of Vibrational Gyroscopes, Lili Dong, Qing Zheng, Zhiqiang Gao

Electrical and Computer Engineering Faculty Publications

This paper presents a novel control circuitry design for both vibrating axes (drive and sense) of vibrational gyroscopes, and a new sensing method for time-varying rotation rates. The control design is motivated to address the challenges posed by manufacturing imperfection and environment vibrations that are particularly pronounced in microelectromechanical systems (MEMS) gyroscopes. The method of choice is active disturbance rejection control that, unlike most existing control design methods, does not depend on an accurate model of the plant. The task of control design is simplified when the internal dynamics, such as mechanical cross coupling between the drive and sense axes, …

Image Analyses Of Two Crustacean Exoskeletons And Implications Of The Exoskeletal Microstructure On The Mechanical Behavior, Liang Cheng, Liyun Wang, Anette M. Karlsson

Mechanical Engineering Faculty Publications

The microstructures of exoskeletons from Homarus americanus (American lobster) and Callinectes sapidus (Atlantic blue crab) were investigated to elucidate the mechanical behavior of such biological composites. Image analyses of the cross-sectioned exoskeletons showed that the two species each have three well-defined regions across the cuticle thickness where the two innermost regions (exocuticle and endocuticle) are load bearing. These regions consist of mineralized chitin fibers aligned in layers, where a gradual rotation of the fiber orientation of the layers results in repeating stacks. The exocuticle and endocuticle of the two species have similar morphology, but different thicknesses, number of layers, and …

2008 Scholars And Artists Bibliography, Rajshehkar G. Javalgi Dr., Michael Schwartz Library, Cleveland State University, Friends Of The Michael Schwartz Library

Scholars and Artists Bibliographies

This bibliography was created for the annual Friends of the Michael Schwartz Library Scholars and Artists Reception, recognizing scholarly and creative achievements of Cleveland State University faculty, staff and emeriti. Dr. Rajshekhar Javalgi was the guest speaker.

Closure To “Discussion: ‘On The Reference Length And Mode Mixity For A Bimaterial Interface’ ” (2008, Asme J. Eng. Mater. Technol., 130, P. 045501), Anette M. Karlsson

Mechanical Engineering Faculty Publications

No abstract provided.

Cryptosporidium Outbreak (Water Treatment Failure): North Battleford, Saskatchewan, Spring 2001, Patrick B. Jameson, Yung-Tse Hung, Chin Y. Kuo, Paul A. Bosela

Civil and Environmental Engineering Faculty Publications

An outbreak of cryptosporidiosis occurred in the town of North Battleford, Saskatchewan, Canada in the spring of 2001. The outbreak left thousands of people sick including about 50 people hospitalized. The source of the outbreak was from the city's surface water treatment plant. The Sedimentation Contact Unit did not satisfactorily remove suspended solids from the source water, resulting in filter breakthrough. Contaminated water was released into the distribution system causing the outbreak. Communication breakdown and confusion exacerbated the situation, extending the duration of the outbreak. The outbreak prompted the province to change the way it regulated municipal utilities of water …

On Cracks And Delaminations Of Thermal Barrier Coatings Due To Indentation Testing: Experimental Investigations, Jin Yan, Thorsten Leist, Marion Bartsch, Anette M. Karlsson

Mechanical Engineering Faculty Publications

Rockwell indentation testing as a method of establishing the interfacial fracture toughness of thermal barrier coatings is investigated. To this end, indentation tests have been systematically performed on coatings with yttria-stabilized zirconia top coat deposited by electron beam physical vapor deposition. Specimens in “as-coated” condition and after heat treatment in air have been studied. Unexpectedly, indentation of the heat-treated samples resulted in smaller delaminations than the as-coated samples, suggesting an increase in fracture toughness for coatings subjected to elevated temperatures. Careful image analyses of the cross-section of the indented area show that the ceramic top coat undergoes a complex damage …

Investigating Isolated Neuromuscular Control Contributions To Non-Contact Anterior Cruciate Ligament Injury Risk Via Computer Simulation Methods, Scott G. Mclean, Xuemei Huang, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

Background

Despite the ongoing evolution of anterior cruciate ligament injury prevention methods, injury rates and the associated sex-disparity remain. Strategies capable of successfully countering key control parameters existent within the injury mechanism thus remain elusive. Forward dynamics model simulations afford an expedited means to study realistic injury causing scenarios, while controlling all facets of the movement control strategy. Utilizing these methods, the current study examined the potential for perturbations in key initial contact neuromuscular parameters to injure the anterior cruciate ligament during the stance phase of sidestep cutting maneuvers.

Methods

Controlled experiments were performed on optimized and validated subject-specific forward …

A Two-Degree-Of-Freedom Time-Optimal Solution For Hard Disk Drive Servo Problems, Shaohua Hu, Zhiqiang Gao

Electrical and Computer Engineering Faculty Publications

This paper deals with the hard disk drive (HDD) servo problems. A novel discrete time-optimal control solution is proposed in a two-degree-of-freedom (2DOF) structure, employing both the feedback and feedforward controllers. The time-optimal feedback controller, derived from a simple, double integral plant model, shows remarkable robustness and disturbance rejection in the presence of resonant modes, measurement noises and position and torque disturbances. It eliminates the needs for two separate controllers for track-seeking and track-following operations. The proposed feedforward controller in this 2DOF structure proves to be quite beneficial in reducing the …

Fluorescent Si Nanoparticle-Based Electrode For Sensing Biomedical Substances, Gang Wang, Siu-Tung Yau, Kevin Mantey, Munir H. Nayfeh

Electrical and Computer Engineering Faculty Publications

We have been studying the miniaturization of silicon crystals and the transition from the solid state to the atomistic state. We demonstrated the existence of “sweet spots” in cluster size in the range 1–3nm that have enhanced chemical, structural, and photo stability. The particles are produced by an electrochemical etching process as dispersion in liquid, and they are reconstituted in films, patterns, alloys, or spread on chips to produce super chips. Unlike bulk, these Si nanoparticle configurations have a spectacular ability to glow in distinct RGB colors. In this paper we describe an electrode sensor built by decorating metal or …

Oxygen Diffusion Through Natural Extracellular Matrices: Implications For Estimating "Critical Thickness" Values In Tendon Tissue Engineering, Caroline Androjna, Jorge E. Gatica, Joanne M. Belovich, Kathleen A. Derwin

Chemical & Biomedical Engineering Faculty Publications

Oxygen is necessary for maintaining cell proliferation and viability and extracellular matrix (ECM) production in 3-dimensional tissue engineering. Typically, diffusion is the primary mode for oxygen transport in vitro; thus, ensuring an adequate oxygen supply is essential. In this study, we determined the oxygen diffusion coefficients of 3 natural ECMs that are being investigated as construct scaffolds for tendon tissue engineering: small-intestine submucosa (SIS), human dermis (Alloderm (R)), and canine fascia lata. Diffusion coefficients were determined using a standard diffusion cell system. The ranges for each matrix type were: SIS: 7 x 10(-6) - 2 x 10(-5) cm(2)/s, Alloderm (R): …

A Weighted Least-Squares Method For Inverse Dynamic Analysis, Antonie J. Van Den Bogert, Anne Su

Mechanical Engineering Faculty Publications

Internal forces in the human body can be estimated from measured movements and external forces using inverse dynamic analysis. Here we present a general method of analysis which makes optimal use of all available data, and allows the use of inverse dynamic analysis in cases where external force data is incomplete. The method was evaluated for the analysis of running on a partially instrumented treadmill. It was found that results correlate well with those of a conventional analysis where all external forces are known.

A Reservation-Based Extended Transaction Protocol, Wenbing Zhao, Louise E. Moser, P. Michale Melliar-Smith

Electrical and Computer Engineering Faculty Publications

With the advent of the new generation of Internet-based technology, in particular, web services, the automation of business activities that are distributed across multiple enterprises becomes possible. Business activities are different from traditional transactions in that they are typically asynchronous, loosely coupled, and long running. Therefore, extended transaction protocols are needed to coordinate business activities that span multiple enterprises. Existing extended transaction protocols typically rely on compensating transactions to handle exceptional conditions. In this paper, we identify a number of issues with compensation-based extended transaction protocols and describe a reservation-based extended transaction protocol that addresses those issues. Moreover, we define …

Mechanical Properties Of A Reinforced Composite Polymer Electrolyte Membrane And Its Simulated Performance In Pem Fuel Cells, Yaliang Tang, Ahmet Kusoglu, Anette M. Karlsson, Michael H. Santare, Simon Cleghorn, William B. Johnson

Mechanical Engineering Faculty Publications

The hygro-thermo-mechanical properties and response of a class of reinforced perfluorosulfonic acid membranes (PFSA), that has potential application as an electrolyte in polymer fuel cells, are investigated through both experimental and numerical modeling means. A critical set of material properties, including Young’s modulus, proportional limit stress, break stress and break strain, is determined for a range of temperature and humidity levels in a custom-built environmental test apparatus. The swelling strains are also determined as functions of temperature and humidity level. To elucidate the mechanical response and the potential effect these properties have on the mechanical durability, mechanics-based simulations are performed …

Rotor Position And Vibration Control For Aerospace Flywheel Energy Storage Devices And Other Vibration Based Devices, B. X. S. Alexander

ETD Archive

Flywheel energy storage has distinct advantages over conventional energy storage methods such as electrochemical batteries. Because the energy density of a flywheel rotor increases quadratically with its speed, the foremost goal in flywheel design is to achieve sustainable high speeds of the rotor. Many issues exist with the flywheel rotor operation at high and varying speeds. A prominent problem is synchronous rotor vibration, which can drastically limit the sustainable rotor speed. In a set of projects, the novel Active Disturbance Rejection Control (ADRC) is applied to various problems of flywheel rotor operation. These applications include rotor levitation, steady state rotation …

Characterization Of Changes In Hyaluronan Following Epidermal Barrier Injury In An Organotypic Model, Gati Ajani

ETD Archive

The stratum corneum, the outermost layer of the epidermis of skin, provides a functional permeability barrier that is essential for our survival and must be rapidly repaired after injury. Of interest to us, a ubiquitous matrix molecule called hyaluronan (HA) has come to the forefront in wound healing research because it is induced after epidermal injury and may be crucial for barrier repair. This thesis examines the role of HA during recovery from the most fundamental form of skin injury, i.e. selective damage to the stratum corneum. The overall question is whether this form of stratum corneum injury can lead …

Novel Antifreeze Protein Constructs For Improved Activity, Ozge Can

ETD Archive

Many organisms are exposed to subzero temperatures in nature and can survive these temperatures by the effect of antifreeze proteins (AFPs), which inhibit ice crystal growth and change the morphology of ice crystals. Although the effects of these proteins, such as recrystallization inhibition, ice growth inhibition, and crystal habit changes, are known, a conclusive description of the protein-ice crystal interaction including interaction energy, surface coverage, and lifetime of adsorbate has been elusive. In this study, different antifreeze protein constructs are designed and expressed such that they can be conjugated to polymers to increase the thermal hysteresis activity especially at low …

Fabrication Of Nanostructured Metals And Their Hydrogen Storage Properties, Asli Ertan

ETD Archive

Searching for new energy sources is highly desirable for the next generations when rapidly changing factors are considered such as population, increasing pollution and exhaustion of fossil fuels. Hence, there is a need for clean, safe and efficient energy carriers or forms of energy that can be transported to the end user. One of these energy carriers is electricity which has been used widely and can be produced from various sources. However, its production from fossil fuels contributes to pollution. On the other hand hydrogen, due to its abundance, light weight, low mass density, high energy density and non-polluting nature …

A Hybrid Reconfigurable Solar And Wind Energy System, Sagar A. Gadkari

ETD Archive

We study the feasibility of a novel hybrid solar-wind hybrid system that shares most of its infrastructure and components. During periods of clear sunny days the system will generate electricity from the sun using a parabolic concentrator. The concentrator is formed by individual mirror elements and focuses the light onto high intensity vertical multi-junction (VMJ) cells. During periods of high wind speeds and at night, the same concentrator setup will be reconfigured to channel the wind into a wind turbine which will be used to harness wind energy. In this study we report on the feasibility of this type of …

The Development Of An In Vivo Spinal Fusion Monitor Using Microelectromechanical (Mems) Technology To Create Implantable Microsensors, Lisa Anne Ferrara

ETD Archive

Surgical fusion of the spine is a conventional approach, and often last alternative, to the correction of a degenerative painful spinal segment. The procedure involves the surgical removal of the intervertebral disc at the problematic site, and the placement of a bone graft that is commonly harvested from the patients iliac crest and placed within the discectomized space. The surrounding bone is expected to incorporate and remodel into the bone graft to eventually provide an immobilized site. Spinal instrumentation often accompanies the bone graft to provide further immobility to the targeted site, thus augmenting the fusion process. However, the status …

Effective Area And Effective Volume Calculations For Ceramic Test Specimens, Rahul Jain

ETD Archive

Calculation of effective volume and/or effective area is a key step in estimating reliability of ceramic component life cycle. Most common tests performed to assess the strength and reliability of components made from ceramics are bend bar specimens tested in three-point and four-point flexure, C-ring and O-ring specimen under diametral compressive or tensile loads and biaxial ring-on-ring specimens. ASTM closed form solutions for the effective volume and area exists for these specimen geometries which are based on classical theories with underlying assumptions. In general the closed form expressions are valid for limited specimen geometry bounds. An alternative numerical approach has …

Relationship Between Arch Height And Midfoot Joint Pressures During Gait, Dong Gil Lee

ETD Archive

A foot arch is a multi-segmented curved structure which acts as a spring during locomotion. It is well known that ligaments are important components contributing to this spring-like property of the arch. In addition, intrinsic and extrinsic foot muscles contribute to arch support. According to the windlass foot model, arch height and midfoot joint orientation change during gait. However, it is not known whether altered joint configurations result in increased joint stress during gait. If so, it is possible for there to be a "vicious cycle" in which joint stress increases as the arch height diminishes, which may then lead …

Greenometer-7: A Tool To Assess The Sustainability Of A Building's Life Cylce At The Conceptual Design Phase, Muhammad Musa Mer'eb

ETD Archive

This study presents a tool that has been developed to measure and subsequently improve the sustainability performance of a building over its entire life-cycle while still at the conceptual design stage. This forecasting tool is called GREENOMETER-7. GREENOMETER-7 is a LCA tool and it evaluates the projected building at two levels: micro- and macro-assessment. The micro-assessment level provides in-depth analysis of the building products, components, and operations however, the macro-assessment level measures the sustainability performance of the building as a whole and covers areas that are not applicable at the product or component level. Both levels consist of categories and …

Mems (Micro-Electro-Mechanical-Systems) Based Microfluidic Platforms For Magnetic Cell Separation, Pulak Nath

ETD Archive

Microfluidic platforms for magnetic cell separation were developed and investigated for isolation of magnetic particles and magnetically tagged cells from a fluidic sample. Two types of magnetic separation platforms were considered: an Isodynamic Open Gradient Magnetic Sorter (OGMS) and a multistage bio-ferrograph. Miniaturized magnets were designed using magnetostatic simulation software, microfluidic channels were fabricated using microfabrication technology and magnetic separation was investigated using video microscopy and digital image processing. The isodynamic OGMS consisted of an external magnetic circuit and a microfabricated channel (biochip) with embedded magnetic elements. The biochip is placed inside the magnetic field of the external circuit to …

A Novel Cardiac Pacing Paradigm For Atrial Fibrillation And Heart Failure Patients, George Emanuel Yanulis

ETD Archive

It has been estimated that 4.6 million persons have heart failure, and 400,000 to 700,000 new cases develop each year and the U.S. Hospital discharges for HF rose from 399,000 in 1979 to 1,099,000 in 2004 according to the National Hospital Discharge Survey. Atrial fibrillation is the most common sustained cardiac arrhythmia in the United States. Recent studies have demonstrated that ventricular rate control is a viable treatment strategy for patients in atrial fibrillation. In a number of cases, despite the electrical resynchronization of the ventricles using biventricular pacing (cardiac resynchronization therapy), heart failure patients in sinus rhythm do not …

Bio-Signal Analysis In Fatigue And Cancer Related Fatigue;Weakening Of Corticomuscular Functional Coupling, Qi Yang

ETD Archive

Fatigue is a common experience that reduces productivity and increases chance of injury, and has been reported as one of most common symptoms with greatest impact on quality-of-life parameters in cancer patients. Neural mechanisms behind fatigue and cancer related fatigue (CRF) are not well known. Recent research has shown dissociation between changes in brain and muscle signals during voluntary muscle fatigue, which may suggest weakening of functional corticomuscular coupling (fCMC). However, this weakening of brain-muscle coupling has never been directly evaluated. More important information could be gained if fCMC is directly detected during fatigue because a voluntary muscle contraction depends …

Biocompatibility Of Osteoblast Cells On Titanium Implants, Dilip Ayyala Somayajula

ETD Archive

Adhesion and proliferation of UMR 106-01 osteoblast cells were studied on various surface modified titanium materials such as polished, sandblasted, anodized and alkaline treated. Anodization of polished surface in Hydrofluoric acid developed nano-tubes, while NaOH treatment produced spongy microporous morphology. Test samples were coated with non-adhesive protein bovine serum albumin and compared with fibronectin coated specimens. The adhesion study lasted for 4 hrs, where osteoblast cells were cultured in serum free medium. Polished titanium, anodized titanium and NaOH titanium have shown similar percentages of cell adherence. The proliferation study lasted for 48 hrs, where cells were initially allowed to adhere …