Engineering Commons^™

Cal Poly's Old Powerhouse Analysis Assessing Stakeholder Preferences, Marissa D. Burns

Construction Management

This research paper delves into the historical and cultural relevance of Cal Poly’s Old Powerhouse, the college’s oldest architectural landmark, which has remained in a state of disuse since the 1990s. Employing meticulous survey methodology; perspectives from faculty, staff, alumni, students, and community members are gathered to illustrate the significance of the Old Powerhouse within the various stakeholders. The study refrains from imposing interpretation but rather seeks to capture the sentiments expressed by stakeholders, providing valuable insights into the building’s perceived value. By centering on the community opinions, the research will underscore the building’s potential and expand on the collected …

Efficacy Of Passive Ventilation With High Exhaust Demands: A Case Study Of Cal Poly Sst, Siddarth Bokka

Construction Management

The Simpson Strong Tie Demonstration Laboratory serves as a multipurpose space allowing students at the College of Architecture and Environmental Design at California Polytechnic State University to build full scale construction projects. The building features a material storage area, a high bay for construction of full-scale projects, and a mezzanine level that houses digital fabrication equipment. However, the building was never designed to house the specific equipment currently installed on the mezzanine and ventilate the exhaust fumes from them. Rather, the building relies on passive natural ventilation that is likely ineffective at properly exhausting hazardous fumes, resulting in complaints from …

Containerization Of Seafarers In The International Shipping Industry: Contemporary Seamanship, Maritime Social Infrastructures, And Mobility Politics Of Global Logistics, Liang Wu

Dissertations, Theses, and Capstone Projects

This dissertation discusses the mobility politics of container shipping and argues that technological development, political-economic order, and social infrastructure co-produce one another. Containerization, the use of standardized containers to carry cargo across modes of transportation that is said to have revolutionized and globalized international trade since the late 1950s, has served to expand and extend the power of international coalitions of states and corporations to control the movements of commodities (shipments) and labor (seafarers). The advent and development of containerization was driven by a sociotechnical imaginary and international social contract of seamless shipping and cargo flows. In practice, this liberal, …

The Current State Of Practice Of Building Information Modeling, Kevin P. Brooks

Masters Theses

Building Information Modeling (BIM) has become extremely prominent in the construction industry in the past twenty years. It serves as a digital repository that can, when used to its fullest potential, combine all aspects of designing, building, and managing a structure in one place, alongside all the data produced in those processes. The construction industry has to date struggled to increase productivity alongside similar fields, such as the manufacturing industry, though the construction industry generally has far more stakeholders on one project than the manufacturing industry. Further, building designs are becoming more complex while project schedules are becoming tighter. As …

Improving Energy Efficiency Of School Buildings With Solar-Assisted Cooling For The Maldives, Ahmed Fathhee

Masters Theses

Anthropogenic activities are responsible for the impact of global climate change because of burning fossil fuels releasing harmful gases into the environment. As a result, the global temperature has risen about 1.18 °C since 1880, causing the global sea level to rise by 178 mm over the past century. This is a threat to countries that are closer to the ocean, especially the low-lying countries such as the Maldives. It is predicted if the sea level keeps rising, most of these islands could be below sea level by 2030.

The Maldives has a tropical climate requiring cooling to achieve thermal …

The Extent Of Drone Education Being Taught In Asc Schools To 4-Year Construction Students, Cheran Teja Dumpati

All Theses

The technology of Unmanned Aircraft Systems (UAS) is growing rapidly in many fields and has become one of the skills in demand in the industry. Universities are one of the primary sources of teaching drone technology with a career-oriented approach. The goal of this study is to investigate the content of the drone curriculum being taught in Associated Schools of Construction (ASC) schools. This includes the topics covered, practical training offered, and the key deliverables taught. This information serves as a foundation for the schools that are looking forward to start drone courses in their department. The research found that …

Wast3d Potential, Andrew Larsen

Masters Theses

Waste is obsolete. Standard building industry practices are harmful to the environment. Non-traditional construction methods were examined as alternatives. Circular design logic was the guiding principle in material choice. Additive manufacturing is a proven modern method for building construction. Research on 3D printing case studies revealed that recycled plastic is a proven material and readily available. Removing plastic waste from the environment and sequestering it in architectural components gives the material a new purpose. The component of focus was a building block for a wall assembly. Inspiration was taken from the hexagonal Basalt rock formations found near volcanic fault lines. …

Interactive Architecture - Intervention Of Virtual Business On Commercial Space, Yihao George Xu

Masters Theses

Traditional mall-based restaurants, such as P.F. Chang’s in the Providence Place Mall, have primarily focused on site-based dining and bar services. However, the food provided by this chain restaurant often lacks depth, and customers seldom learn the story behind the dishes. This thesis explores the integration of mixed reality technology within the physical environment of P.F. Chang’s, an American Chinese restaurant chain with over 300 locations, aiming to transform it into an authentic Shanghai food culture experience. This experience combines virtual and physical stimuli to evoke various periods of Chinese history, providing a unique encounter for customers.

The proposed transformation …

Xenabloom, Sophia Maglabe, Ryer Lauth, Elizabeth Shaw, Sheyna Rongong

Architectural Engineering

Proposal for an architectural and structural design of a shade structure at the Leaning Pine Arboretum, employing the Xenaform typology of Poly Shells, LLC.

Sky Survey Radio Telescope, Jack E. Mcguigan

Electrical Engineering

This document outlines the design of a radio telescope designed to perform hydrogen line sky surveys. The telescope produces radio images mapping the intensity and relative velocities of hydrogen concentrations to their sky coordinates. Over the course of a day, the telescope images the regions of space visible to it, allowing sky survey imagery to be updated daily. Sky survey images are comprised of an array of pixels corresponding to specific sky coordinates. Each 8-bit RGB pixel contains information on the concentrations of hydrogen in the brightness and relative velocity in the color. Radio images mapping the concentrations and velocities …

Investigation Of Natural Pozzolans: Analyzing The Practicality Of Natural Pozzolans As A Partial Substitute For Cement In Grout Production, Jadyn I. Breien, Andrew J. Baro, Logan T. Marino

Architectural Engineering

This senior project aims to investigate whether natural pozzolans are more sustainable than fly ash and a sufficient substitute for cement in the production of grout. By following the intent of the ASTM (American Society of Testing and Materials) standards, a conclusion will be made to determine if natural pozzolans can contribute comparable strength in compression. The objective is to prove that natural pozzolans should be utilized in the production of grout rather than alternatives such as fly ash because it can provide similar strength while being more economical and more sustainable.

The Center For Centering Dome, Olek Piechaczek, Ryan M. Scharf

Architectural Engineering

The Center for Centering seeks to create a large-scale healing center, conducive to individual centering of the mind and body. This mobile installation provides a relaxing, enclosed space while still maintaining a connection to the outdoors. The clients liked the idea of having a pop-up installation that could be easily set up as a touring display. With a deadline for installation looming in June 2022, a team of students had five months to design and manufacture the structure.

In winter 2022, the students developed custom geometry to minimize the number of individual parts and built a ¼ scale model of …

Development Of The New Hasslein Caed Collaborative, Catie Dines

Construction Management

This paper outlines the development and execution of the new Hasslein CAED Collaborative student competition which engages students of all five majors in the College of Architecture and Environmental Design in a Request for Proposal style competition. CAED houses students studying Architecture, Architectural Engineering, City and Regional Planning, Construction Management, and Landscape Architecture. There is little opportunity for interdisciplinary collaboration within the CAED, despite our future career paths being heavily intertwined. This competition followed research by Greta Stout, class of 2022, on the benefits and support of interdisciplinary collaboration at Cal Poly SLO in CAED. The competition is named after …

The Viability Of Electrification For Industrial Off-Road Vehicles In Construction, Caden Patrick Stoker

Construction Management

Federal and State legislation has been passed limiting the prospective propulsion options for heavy industrial off-road vehicles that general contractors can operate on the jobsite. The interest behind this research project is the viability of introducing fully electric off-road construction vehicles into the heavy civil construction industry and if the timeline for implementation is realistic or optimistic. As new rules and regulations pertaining to the future emissions requirements of civilian and commercial vehicles effect the country, the construction industry is spending billions in order to develop (and are currently developing) fully electric off-road industrial vehicles (dozers, front loaders, scrappers, dump …

City Farm Slo Educational Pizza Oven, Koby J. Ramage

Construction Management

City Farm SLO is a nonprofit that educates the public about growing food, and they donate the produce to food banks and communities in need. Their mission is to promote healthy living through sustainable agriculture and farm-based education. This senior project is to build them an educational pizza oven for them to use in their classes. With it they will give lessons where they cook pizzas using ingredients that they grow on site. To do this, the builder had to make it lightweight and able to move around the property to different meeting places and outdoor classrooms. It is also …

Estimating The Impact Of Infill Housing On Reduction In Vehicle Miles Traveled, Peyton Marie Ratto

Master's Theses

Vehicle miles traveled (VMT) and its relationship with the built environment has been extensively studied. Most notably, five D variables of the built environment including density, diversity, design, destination accessibility, and distance to transit are the key variables included in this research to explain VMT generation from housing developments. This thesis uses prior research that developed robust statistical models and findings to create a framework to estimate VMT reduction affected by infill housing developed using incentives provided by the state compared to a regional comparator. The regional comparator is typically a suburban single-family housing development in the region. The models …

Attainable And Sustainable Home Building Solutions, Katrina Matthews

Construction Management

Sustainability has fortunately been a recent concern in the construction industry as climate change continues to impose potentially insurmountable threats to the global environment. Although many new methods have been adopted in efforts to lessen the adverse environmental effects of construction-related activities, as a society, we still have much room for growth as the built environment accounts for almost 50% of global emissions. Many changes and standards must be adopted to make these solutions efficiently beneficial. To set industry standards, we must start with the most basic form of construction- residential building. This report covers two attainable framing solutions for …

Floating Dock At Santa Rita Ranch: A Design And Cost Estimate Package Prepared For The Land Conservancy Of San Luis Obispo, Sophia Ann Federico

Construction Management

The purpose of this project is to provide the Land Conservancy of San Luis Obispo with three design options for a floating fishing/boat dock system that they want to build on a small lake located on a plot of land that they own and preserve called Santa Rita Ranch. The design package that I created includes drawings, weight and buoyancy calculations, a cost estimate, and product specs. My approach was to utilize my estimating skills that I have acquired from my construction management classes and from my work at a general contractor’s office in the preconstruction department. The design and …

City Farm Slo Garden For All Accessible Planter Beds, Allison C. Wild

Construction Management

This paper outlines the design, coordination, and construction efforts to build the Accessible Planter Boxes for the City Farm SLO’s Garden for All. The Garden for All was a concept created by the City Farm SLO staff to meet the need for an accessible learning space for students. The full design for the Garden for All also included mobile benches and tables, a shade structure, and decomposed granite pathways that were completed by other students. This project included the construction of 6 raised planter beds of differing heights and designs. Each planter bed was approximately 10 feet long and varied …

Exploring The Potential Of Pavegen’S Kinetic Energy Generating Floor For Sustainable Energy Solutions: A Proposal For Cal Poly Slo, Brandon J. Cuneo

Construction Management

This paper proposes the installation of Pavegen's kinetic energy generating floors at Cal Poly’s campus as a sustainable energy solution. Pavegen has developed a pioneering technology that converts footsteps into clean and renewable energy. The versatility of these floors is demonstrated through successful implementations in various settings, such as transportation hubs and public spaces, generating power from foot traffic. Collaborations with Schneider Electric, installation at Dupont Circle, and integration at Heathrow Airport showcase the potential for sustainable urban infrastructure. This paper outlines research conducted on Pavegen and similar solutions, including communication with company representatives and examining proposed installation locations at …

3d Printing Of Earthen Materials: Toward The Carbon-Zero Construction, Shiva Bhusal

Civil Engineering ETDs

In recent years, digital manufacturing techniques in the architecture and construction industry have rapidly gained attention, especially with 3D printing, also called additive manufacturing. The use of cement has been common in modern construction and is now being explored for 3D printing. However, due to cement's contribution to approximately 7 percent of global carbon emissions and its high cost, research on sustainable and greener materials has gained attention. Previous studies on alternative construction have examined the mechanical and rheological properties of soil mixes, but not much attention has been given to printability evaluation, shrinkage, and cracking, which can affect the …

Song’S Site At Los Angeles Eco-Village Redevelopment, Kendall Gilbert, Marina Rios, Kristin Hernandez, Gianna Morelli

Honors Thesis

The Los Angeles Eco-Village (LAEV) is a co-op housing community, located in Koreatown, focused on building sustainable and economically cooperative living in an urban environment. The purpose of this project is to transform a property recently acquired by the LAEV, called Song’s, into a multipurpose community hub. The project design goals established with LAEV founder and community members, include cultivating new highly sustainable and resilient ideas on urban living and incorporating educational elements that inspire the community and visitors to live more sustainably. This project proposes three design elements to improve the community use of the newly acquired Song’s at …

Slo Botanical Garden Deck, Noah E. Demer

Architectural Engineering

This project consists of the design and construction of an outdoor-use deck. This deck is to be located in the NE corner of the Sage Meadow at the San Luis Obispo Botanical Garden at 3450 Dairy Creek Rd, San Luis Obispo, CA 93405. This deck’s intended use is as a gathering area for people to congregate. Originally, the ideal deck area was proposed as 700+ square feet, but with further site and project limitations the final design was ~480 square feet. This deck has not been constructed.

Historic Downtown Streetscape Plan Price City, Utah, Patricia Beckert

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

The idea of a small-town Main Street has profound meaning within the American culture that has prevailed for the past two centuries. Historically, Main Street serves as the beating heart of a community, a place where economic, social, cultural, and civic activities are centered (Francaviglia, 1996; Main Street America, n.d.). Since the beginning of the 19th century, many factors have led to the decline of Main Streets, and despite a variety of efforts from different stakeholders, that decline has only intensified in recent decades (Isenberg, 2008; Orvell, 2014 Howard, 2015). In 1980, after a three-year project conducted by the National …

Procedural City Generation With Combined Architectures For Real-Time Visualization, Griffin Poyck

All Theses

The work and research of this paper sought to build upon traditional city generation and simulation in creating a tool that both realistically simulates cities and their prominent features and also creates aesthetic and artistically rich cities using assets that combine several contemporary or near contemporary architectural styles. The major city features simulated are the surrounding terrain, road networks, individual buildings, and building placement. The tools used to both create and integrate these features were created in Houdini with Unreal Engine 5 as the intended final destination. This research was influenced by the city, town, and road networking of Ghost …

Precious Plastics - Plastic Brick Machine Fabrication, Timothy Ukaobasi Kanu, Evi Paraskevi Troulis

Architectural Engineering

The goal of this research is to determine the structural parameters of the recycled plastic polypropylene when molded into bricks resembling CMU blocks. To accomplish this, three mechanisms had to be assembled: the shredder, the injector, and the 1x1 mold. A tensile and compression test were to be performed on the plastic brick, and the values would be used to compare the tensile and compressive strength of PP plastic bricks, as well as their modulus of elasticity and stress vs. Strain performance. These values would be analyzed to determine whether it would be feasible to build an entire plastic wall. …

Building Artificial Reefs From Recycled Construction Materials: A Feasibility Study, Nicholas H. Lew

Construction Management

Naturally occurring reefs are some of the world’s most biologically diverse ecosystems formed by jagged rocks tucked slightly below sea level. In recent years global warming began to pose a major threat to many reef habitats. Most relevant is the increase in surface seawater temperatures that cause coral to bleach, taking away major food sources for larger marine species. Researchers have combated this by deploying artificial reefs in substitution for naturally formed limestone rock formations in order to promote the expansion of coastal habitats. This project specifically aims to utilize construction waste towards the production of artificial reefs, effectively upcycling …

Urban Densification At Twin Creeks Apartments: High-Density Living With Low-Density Luxuries, Ryan Griswold

Construction Management

Urban sprawl is characterized by the rapid growth of the extent of cities and towns. In the United States, urban sprawl is greatly influenced by housing density. In the past half-century, developers have favored constructing and consumers have preferred living in neighborhoods of detached, single-family homes. This is because low-density living provides more housing services, or additional benefits, than most high-density developments, such as apartments and townhomes. Residents of low-density living often have more privacy, outdoor space, interior natural light, and many other benefits over residents of higher-density developments. However, Twin Creeks Apartments, located in San Luis Obispo, California, is …

Future Of Augmented And Virtual Reality In Construction, Cameron Ghoddoucy

Construction Management

A series of virtual design contractors were interviewed regarding the future involvement of augmented and virtual reality software integration with construction processes. Within the construction industry, VDC specialists rely on Building Information Modeling (BIM) and Computer Aided Design (CAD) to create digital models that can be used to analyze the design of a building from all points of view. The interviewees responded to questions about software implementation advantages, and related user experiences. Six interviews were conducted, amongst three industry leading companies. Their assumptions of future AR and VR usage in construction were based on learned knowledge and prior field exploration. …

Construction Of High-Bay Lab Reaction Frame Foundations, David R. Bowen, Henry E. Miller, Blaize Twisselman

Construction Management

This paper details the construction process of two concrete modular foundations designed to meet specific design standards for various testing methods. The project, positioned within the California Polytechnic State University, San Luis Obispo (Cal Poly) High Bay Lab, will provide the Architectural Engineering (ARCE) and Construction Management (CM) departments with valuable insight into industry structural elements. The project required extensive forethought and thoroughness due to the complex designs, including 200 all-thread coupler attachments and a cumbersome rebar cage. This paper outlines the primary phases of construction, including material procurement and quality control, and discusses how the final product was obtained. …