Engineering Commons^™

Optimizing On-Street Parking Supply With Analytical Models, Chawalit Tipagornwong

Dissertations and Theses

Commercial vehicles are crucial for the urban economy, but they generate negative impacts as well. This leads to restrictions such as a reduction in the number of loading zones. The result is that commercial drivers spend a significant amount of time searching for available loading zones. To avoid searching for parking, some commercial drivers double park, which causes traffic congestion. Therefore, the number of loading zones should be set properly. Since a curb is allocated between both loading zones and parking spaces, both parking types have to be considered. Many on-street parking management strategies have been implemented, including pricing meter …

Weigh-In-Motion Auto-Calibration Using Automatic Vehicle Identification, Fu Ren Zhang Zhang Durandal

Graduate Theses and Dissertations

Weigh-in-Motion (WIM) sensors are installed on mainline lanes at highway locations to record vehicle weights, axle spacing, vehicle class, travel speed, vehicle length, and traffic volume. These data elements support effective transportation planning, infrastructure design, and policy development. Therefore, it is important that WIM sensors supply accurate data. After initial installation and calibration, WIM systems may experience measurement drifts in weight and axle detection. Recalibration takes two general forms: (a) On-site calibration involving running trucks of known weight over WIM scales and (b) Auto-calibration methods involving comparisons to assumed reference weights. Auto-calibration can be more cost and time effective than …

Evaluation Of Fracture Principles In Asphalt Concrete Utilizing The Sc(B) Geometry, Airam Marlee Morales Vega

Graduate Theses and Dissertations

Since cracking is one of the principal distresses to be considered in asphalt concrete, multiple fracture tests and geometries have been used to quantify cracking resistance. One of the most popular geometries that have been used in fracture tests is the Semi-Circular bend (SC(B)). However, for this geometry, most of the fracture test methods use different parameters such as thickness, testing temperatures, and loading rates. Thus, the purpose of this research was first to evaluate fracture energy by performing a ruggedness test based on ASTM E1169. Then, to apply fracture mechanics concepts to evaluate three specimen thicknesses (25, 50, and …

Evaluation Of Concrete Deck Curing Regimens Using Capillary Pressure Sensing System, Samuel Spann

Graduate Theses and Dissertations

Early-age plastic shrinkage cracking is a common problem with the construction of concrete bridge decks due to the high surface area-to-volume ratio and exposure to potentially detrimental environmental effects. Curing regimens are utilized to mitigate cracking risk during the plastic stage of the concrete; the curing regimens evaluated for this study were wet burlap-polyethylene sheeting, two acrylic curing compounds, and one lithium compound. Capillary pressure in the water filled pores has been shown to correlate to the plastic shrinkage cracking risk of concrete. A new portable system has been developed to measure the capillary pressure that could potentially be used …

Truck Activity Pattern Classification Using Anonymous Mobile Sensor Data, Taslima Akter

Graduate Theses and Dissertations

To construct, operate, and maintain a transportation system that supports the efficient movement of freight, transportation agencies must understand economic drivers of freight flow. This is a challenge since freight movement data available to transportation agencies is typically void of commodity and industry information, factors that tie freight movements to underlying economic conditions. With recent advances in the resolution and availability of big data from Global Positioning Systems (GPS), it may be possible to fill this critical freight data gap. However, there is a need for methodological approaches to enable usage of this data for freight planning and operations.

To …

Study Of Internal Strains Developed In Concrete Decks At Early Ages In Steel Continuous Bridges, Fernando R. Benitez Ortiz

Graduate Theses and Dissertations

The Arkansas Department of Transportation (ARDOT) has identified bridge deck cracking shortly after concrete decks are placed and prior to applying traffic loads. Previous researchers have confirmed improper construction practices and design methods can lead to deck cracking. Currently, many contractors throughout Arkansas are using continuous deck pours. This construction approach may restrict the concrete slab from movement during early age shrinkage, causing tensile stresses to develop. The final stresses at the end of construction must be lower than the concrete tensile strength, if not cracking issues will develop. Eventually, these cracks may enlarge due to service load stresses and …

Fractional Order State Feedback Control For Improved Lateral Stability Of Semi-Autonomous Commercial Heavy Vehicles, Rasheed Mazen Abdulkader

Graduate Theses and Dissertations

With the growing development of autonomous and semi-autonomous large commercial heavy vehicles, the lateral stability control of articulated vehicles have caught the attention of researchers recently. Active vehicle front steering (AFS) can enhance the handling performance and stability of articulated vehicles for an emergency highway maneuver scenario. However, with large vehicles such tractor-trailers, the system becomes more complex to control and there is an increased occurrence of instabilities. This research investigates a new control scheme based on fractional calculus as a technique that ensures lateral stability of articulated large heavy vehicles during evasive highway maneuvering scenarios. The control method is …

Evaluating Urban Downtown One-Way To Two-Way Street Conversion Using Microscopic Traffic Simulation, Bernice Liu

Master's Theses

Located in the heart of Silicon Valley, Downtown San Jose is attracting new residents, visitors, and businesses. Clearly, the mobility of these residents, visitors, and businesses cannot be accommodated by streets that focus on the single-occupancy automobile mode. To increase the potential for individuals to use non-single-occupancy modes of travel, the downtown area must have a cohesive plan to integrate multimodal use and public life. Complete streets are an integral component of the multi-modal transport system and more livable communities. Complete streets refer to roads designed to accommodate multiple modes, users, and activities including walking, cycling, transit, automobile, and nearby …

Investigating The Addition Of Suicide Prevention Barriers To The Natchez Trace Parkway Bridge, Jaideep Thota, Nancy Abdo, Payne Susong, Connor Campbell, Joseph Allston, Meet Patel

Chancellor’s Honors Program Projects

No abstract provided.

Evaluation Of The Rheological Behaviors And Molecular Composition Properties Of Crumb Rubber Modified Emulsion For Chip Seal, Md Tanvir Ahmed Sarkar

LSU Master's Theses

An experimental study was conducted to characterize the chemical, molecular, and rheological properties of different asphalt emulsions including a newly introduced tire rubber modified asphalt emulsion. One tire rubber modified asphalt emulsion (CRS-2TR), two conventional emulsions (CRS-2 and CRS-2P), and one asphalt rubber binder (AC20-5TR) were evaluated. The differences in functional groups, chemical composition, and molecular weight distribution of the asphalt binder and emulsions under different aging conditions (Original, RTFO-aged, and PAV-aged) were evaluated by the Saturates, Aromatics, Resins and Asphaltenes (SARA) fractionation test, High-Pressure Gel Permeation Chromatography (HP-GPC), and Fourier Transform Infrared Spectroscopy (FTIR) test, respectively. Superpave Performance Grade …

The Promise Of Vr Headsets: Validation Of A Virtual Reality Headset-Based Driving Simulator For Measuring Drivers’ Hazard Anticipation Performance, Ganesh Pai Mangalore

Masters Theses

The objective of the current study is to evaluate the use of virtual reality (VR) headsets to measure driving performance. This is desirable because they are several orders of magnitude less expensive and, if validated, could greatly extend the powers of simulation. Out of several possible measures of performance that could be considered for evaluating VR headsets, the current study specifically examines drivers’ latent hazard anticipation behavior both because it has been linked to crashes and because it has been shown to be significantly poorer in young drivers compared to their experienced counterparts in traditional driving simulators and in open …

Sustainable Travel Incentives Optimization In Multimodal Networks, Hossein Ghafourian

Masters Theses

Tripod, an integrated bi-level transportation management system, is a smartphone application from the potential user’s point of view which would be instantly accessed prior to performing the trip. Since there are constantly several alternatives for any trip, Tripod considers a series and combination of various parameters, including departure time, mode and route, and rewards for each alternative with a number of redeemable points for goods and services called “Tokens”. The framework responsible for computing the optimized number of tokens awarded to the set of available alternatives in order to minimize the system-wide energy consumption under a constrained Token budget, is …

Spatio-Temporal Analysis Of Highway Congestion And Accidents: A Case Study Of Interstate 285 In Georgia, Melodi Zhan-Moodie

Master of Science in Civil Engineering Theses

Road traffic crashes threaten thousands of drivers every day and significant efforts have been put forth to reduce the number of traffic crashes and their impact. Traffic congestion could be both a result of and a contributing factor to traffic crashes. The aim of this study is to investigate spatio-temporal traffic congestion and crash patterns to gain a better understanding of the causation of congestion and accidents, and their interaction. The Interstate 285 (I-285) in Georgia was used as a case study. With the aid of Geographic Information Systems (GIS), spatial clustering and densities of accidents were performed by following …

Effect Of Light Activated Self-Healing Polymers On The Performance Of Asphalt Pavement Containing Recycled Asphalt Materials (Rap/Ras), Sharareh Shirzad

LSU Doctoral Dissertations

A new generation of Ultraviolet (UV) light-induced self-healing polymers was introduced for the asphalt pavement application with the aim to enhance pavements durability while increasing its service life. The developed self-healing polymer was mixed with asphalt binder using two different methods, passive and reactive. For the passive method, the cured self-healing polymer was ground to smaller particle size and then it was mixed with asphalt binder using a high shear stirrer and at a high temperature. For the reactive method, self-healing polyurethane pre-polymer was added to the asphalt binder at a lower temperature and lower shear rate compare to the …

Generalized Relay Network Design And Collaborative Dispatching In Truckload Transportation, Amin Ziaeifar

Operations Research and Engineering Management Theses and Dissertations

The truckload industry faces a serious problem of high driver shortage and turnover rate which is typically around 100\%. Among the major causes of this problem are extended on-the-road times where drivers handle several truckload pickup and deliveries successively; non-regular schedules and get-home rates; and low utilization of drivers dedicated time. These are by-and-large consequences of the driver-to-load dispatching method, which is based on point-to-point dispatching or direct shipment from origin-to-destination, commonly employed in the industry. In this dissertation, we consider an alternative dispatching method that necessitates careful design of an underlying network. In this scheme, a truckload on its …

Temporal-Spatial Analysis Of Emergency Evacuation Traffic, Lorraine Margot Acevedo Loreto

Doctoral Dissertations and Master's Theses

Mass evacuations, particularly those at a statewide level, represent the largest single-event traffic movements that exist. These complex events can last several days, cover thousands of miles of roadway, and include hundreds of thousands of people and vehicles. Often, they are also marked by enormous delay and congestion and are nearly always criticized for their inefficiency and lack of management. However, there are no standardized methods by which to systematically quantify traffic characteristics at the proper scale. This paper describes research to develop and apply an analytical method to measure and describe statewide mass-evacuations in a practical, cost-effective manner. The …

Research On Optimization Of The Ship Routeing System In Qiongzhou Strait, Qifu Wang

Maritime Safety & Environment Management Dissertations (Dalian)

No abstract provided.

Study On The Reduction Of Carbon Emission，Results From The Vehicles In The Shanghai Port’S Container Collection And Distribution System, Chaofeng Chen

World Maritime University Dissertations

No abstract provided.

Effect Of Subgrade Conditions On Pavement Analysis And Performance Prediction: A Study For Idaho Conditions, Md Jibon

Boise State University Theses and Dissertations

The Mechanistic-Empirical (M-E) pavement design approach detailed in the Mechanistic-Empirical Pavement Design Guide (MEPDG), and subsequently implemented through AASHTOWare^® Pavement ME Design relies extensively on detailed material properties that ultimately govern the analysis and performance prediction results. For unbound materials like soils and aggregates, Resilient Modulus (M_R) is the most critical input parameter affecting layer response under vehicular and environmental loading. Representing a material’s ability to ‘recover’ after loading, resilient modulus is determined in the laboratory through repeated load triaxial testing. Although the original test protocol to measure the resilient modulus value of a soil or aggregate …

Exploring The Use Of Data From Newer Technologies In Road Design, Mahamudul Hasan

Boise State University Theses and Dissertations

The use of Light Detection and Ranging (Lidar) is widespread currently all over the world including the United States. Though on-the-ground surveying and photogrammetric surveying are the more common methods to acquire terrain information, Lidar data is being increasingly used for this purpose due to its various advantages. Various research indicates that the accuracy of Lidar data has increased enough to make its use suitable for diverse applications. One potential application that is explored in this research is the use of terrain models generated from Lidar data in road design. To make such use possible we need to be assured …

Assessment Of Some Of The Common Practices Used In Scheduling Highway Projects, Jennifer Reyes

Theses and Dissertations

There are several factors documented in the literature that can affect the accuracy of estimated project durations in highway construction, such as weather, location, and soil conditions. Recently, the Texas Department of Transportation (TxDOT) raised a concern regarding some of the practices used when estimating the contract time for projects. This research presents an assessment of the effect that two practices identified have on the estimated project duration. These two practices include: 1) the estimated lead/lag times in project schedules and 2) scheduling with only critical or controlling activities. The effect of these practices is measured, primarily, by using four …

Evaluating Sustainable & Equitable Financing For Pedestrian Infrastructure Maintenance And How The Quality Of Pedestrian Infrastructure Affects The Choice To Walk, Alexis Corning Padilla

Civil Engineering ETDs

In many communities, pedestrian infrastructure is poorly maintained. One challenge is finding sustainable and equitable funding since many municipalities across the country require adjacent property to maintain and repair sidewalks adjacent to their property. These policies are difficult to enforce, may place a high cost on lower-income households, and may be partly responsible for the poor condition of many sidewalks. Therefore, in the first part of this research, we evaluated three alternatives for financing the maintenance of sidewalks in Albuquerque, New Mexico: increasing the gross receipts tax, the gasoline excise tax, or the property tax. We concluded that any of …

Is Transportation Planning Effective? A Critical Review Of Long-Range Regional Transportation Planning In The United States, Razieh Nadafianshahamabadi

Civil Engineering ETDs

The Federal-Aid Highway Act requires urban areas with a population greater than 50,000 to create Metropolitan Planning Organizations (MPOs) to ensure that funding for transportation projects and programs are based on a continuing, cooperative, and comprehensive planning process. A major responsibility of each MPO is the creation of a long-range transportation plan (LRTP) that addresses the transportation needs of a metropolitan region over the next twenty years or more. While long-range regional transportation planning goals have grown to include a wide range of concerns and technical methods for evaluating planning scenarios have advanced substantially over the past 50 years, there …

Equity And Efficiency In Multi-Modal Transportation Systems, Nicholas M. Fournier

Doctoral Dissertations

The land-use pattern for many cities is a central business district surrounded by sprawling suburbs. This pattern can lead to an inefficient and congestion-prone transportation system due to a reliance on automobiles, because high-capacity transit is not efficient in low-density areas where insufficient travelers can access transit. This also poses an equity concern as the monetary cost of faster and more expensive travel disproportionately burdens low income travelers. This dissertation presents a deterministic approximation of a discrete choice model for mixed access and mainline transportation modes, meaning that travelers may use different modes to access a mainline system, such as …

Modeling The Effect Of New Commuter Bus Service On Demand And The Impact On Ghg Emissions: Application To Greater Boston, Christopher Lyman

Masters Theses

The transportation sector is considered one of the major contributors to greenhouse gas (GHG) emissions in metropolitan areas, and any efforts to reduce these emissions requires strategic management of multiple transportation modes. This paper presents a method to identify opportunities to reduce GHG emissions by expanding commuter bus services and incentives to shift commuters from private cars to transit. The approach uses a nested multinomial logit model for mode choice in a region that includes driving alone, carpooling, walking, cycling, and using four possible transit modes (ferry, commuter rail, rapid transit and bus) by walk access or driving access. A …

The Gouda, The Bad, And The Ugly: Prioritizing Intersections For Pedestrian Safety In Tillamook, Or With Different Risk Estimation Methods, Kelly M. White

Civil and Environmental Engineering Master's Project Reports

The following report explores five different pedestrian risk estimation methods at urban intersections. Six study intersections in Tillamook, Oregon were chosen as a case study to analyze each risk estimation method and apply the values to a project prioritization process. Ultimately, risk factors of both exposure and infrastructure contribute to the highest amount of risk for pedestrians. The Oregon Department of Transportation's State Planning and Research Report 779 was identified as the most comprehensive risk estimation method.

Field Performance And Cost Effectiveness Of Crack Sealing In Flexible And Composite Pavements, Momen Ragab Mousa

LSU Doctoral Dissertations

Surface cracking is one of the major surface distresses in asphalt concrete (AC) pavement, allowing water infiltration through the cracks, causing stripping in asphalt pavement layers, and weakening and deteriorating the base and/or subgrade. Its treatment, therefore, is one of the major activities in pavement preservation for many state DOTs. Among the various treatment methods currently available to preserve AC pavement with existing surface cracking are various forms of crack sealing. Crack sealing is not a common practice to Louisiana highways since the benefit of such treatment appears to be affected by the elevation of the ground water table. Studies …

Evaluation Of Traffic Speed Deflectometer For Pavement Structural Evaluation In Louisiana, Zia Uddin Ahmed Zihan

LSU Master's Theses

Many state agencies have recognized the importance of incorporating pavement structural conditions in the selection of maintenance and rehabilitation (M&R) strategies along with functional indices. To measure in-service pavement structural capacity, surface deflection under a defined load has been typically used. The Rolling Wheel Deflectometer (RWD) and Traffic Speed Deflectometer (TSD) have emerged as continuous pavement deflection-measuring devices as they operate at traffic speed and reduces lane closure and user delays.

The research objective of this study was to assess the feasibility of using TSD measurements at the network-level for pavement conditions structural evaluation in Louisiana. To achieve the objectives …

A Decision-Making Tool For Incorporating Cradle-To-Gate Sustainability Into Pavement Design, Sujata Subedi

LSU Master's Theses

The need to continually maintain an aged and crumbling national roadway network, together with a growing demand for upgrading has resulted in major environmental and economic impacts around the nation. This has led to an interest in developing a structured framework to quantify the sustainability performance of pavements by balancing economic and environmental performance against engineering criteria. This study developed an Environment Product Declaration (EPD) based, decision-making framework to quantify the sustainability of pavement design alternatives. In this study, the sustainability of pavement is described in tandem with Environmental and Economic performance criteria. First, the Environmental analysis was inclusive of …

Sidewalks To Nowhere: A Tool To Prioritize Pedestrian Improvements, Ho Yan Lai

Master's Theses

Walkability as a concept that captures the ability to walk from one place to another has multiple dimensions. Between traversability to being a proxy for better urban places, there are also numerous measurements of walkability that attempts to quantify certain or all aspects of walkability. It is, however, unclear, through a review of available literature, how these measurements of walkability relate to each other statistically. This methodology focuses on generating a framework for analysts to evaluate and prioritize pedestrian infrastructure. WalkScore™ (WS), HCM Pedestrian Level of Service (PLOS), Average Nodal Degree (AND), and Intersection Density are the four metrics selected …