Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 11 of 11

Full-Text Articles in Engineering

Live Access Control Policy Error Detection Through Hardware, Bryce Mendenhall May 2022

Live Access Control Policy Error Detection Through Hardware, Bryce Mendenhall

Graduate Theses and Dissertations

Access Control (AC) is a widely used security measure designed to protect resources and infrastructure in an information system. The integrity of the AC policy is crucial to the protection of the system. Errors within an AC policy may cause many vulnerabilities such as information leaks, information loss, and malicious activities. Thus, such errors must be detected and promptly fixed. However, current AC error detection models do not allow for real-time error detection, nor do they provide the source of errors. This thesis presents a live error detection model called LogicDetect which utilizes emulated Boolean digital logic circuits to provide …


Lawn Buddy, Jayson Johnston, Andrew Brown, Jacob Maljian Jun 2020

Lawn Buddy, Jayson Johnston, Andrew Brown, Jacob Maljian

Electrical Engineering

Grass lawns are a common hallmark of the American home. In 2019, a survey from the National Association of Landscape Professionals found that 81% of all Americans owned a lawn [1]. Mowing is a time consuming and costly chore that is part of maintaining a grass lawn. The manual labor in mowing a lawn can exceed 40 hours per year [2]. People commonly incur weekly costs on mowing services to save time. Traditional gas powered mowers are physically demanding and use engines that need routine maintenance. They operate loudly enough that users should be wearing hearing protection and the noise …


Evaluating Driving Performance Of A Novel Behavior Planning Model On Connected Autonomous Vehicles, Keyur Shah May 2020

Evaluating Driving Performance Of A Novel Behavior Planning Model On Connected Autonomous Vehicles, Keyur Shah

Honors Scholar Theses

Many current algorithms and approaches in autonomous driving attempt to solve the "trajectory generation" or "trajectory following” problems: given a target behavior (e.g. stay in the current lane at the speed limit or change lane), what trajectory should the vehicle follow, and what inputs should the driving agent apply to the throttle and brake to achieve this trajectory? In this work, we instead focus on the “behavior planning” problem—specifically, should an autonomous vehicle change lane or keep lane given the current state of the system?

In addition, current theory mainly focuses on single-vehicle systems, where vehicles do not communicate with …


Developing An Automatic Control System For Track Relays In The Relay Room Of The Railway Stations Of The Joint Stock Company “Uzbekistan Temir Yo’Llari”, Q.K. Nuriddinov Aug 2019

Developing An Automatic Control System For Track Relays In The Relay Room Of The Railway Stations Of The Joint Stock Company “Uzbekistan Temir Yo’Llari”, Q.K. Nuriddinov

Journal of Tashkent Institute of Railway Engineers

This article deals with the problems of developing an automatic control system for track relays in the relay room of the railway stations of the Joint Stock Company “Uzbekistan Temir Yo’llari”. The statistical data of failures that occurred at the railway stations of the Joint Stock Company “Uzbekistan Temir Yo’llari” are given. A functional diagram of a local module for inputting analog signals from Signaling, Centralization, Interlocking and data transmission systems on a personal computer using a microcontroller via an Ethernet channel has been developed.


Ball Oscillating Bouncer, Eric Blok, Daniel Altemese, Ryan Nowacki, Maram Qurban Jan 2018

Ball Oscillating Bouncer, Eric Blok, Daniel Altemese, Ryan Nowacki, Maram Qurban

Williams Honors College, Honors Research Projects

The purpose of this report is to document the need, objectives, marketing and engineering requirements, as well as validate the design of an autonomous control device capable of continuously bouncing a table tennis ball on a paddle. This includes the design of a self correcting system using lightweight materials, and as few sensors and components as possible to achieve a compact, portable design. To accomplish this, the system is designed to react to a ball falling from as short a distance as 10 centimeters above the paddle, meaning all sensor processing, control processing, and motor drives should be able to …


Cyber-Physical Embedded Systems With Transient Supervisory Command And Control: A Framework For Validating Safety Response In Automated Collision Avoidance Systems, Daniel K. Trembley Jan 2018

Cyber-Physical Embedded Systems With Transient Supervisory Command And Control: A Framework For Validating Safety Response In Automated Collision Avoidance Systems, Daniel K. Trembley

Graduate Dissertations and Theses

The ability to design and engineer complex and dynamical Cyber-Physical Systems (CPS) requires a systematic view that requires a definition of level of automation intent for the system. Since CPS covers a diverse range of systemized implementations of smart and intelligent technologies networked within a system of systems (SoS), the terms “smart” and “intelligent” is frequently used in describing systems that perform complex operations with a reduced need of a human-agent. The difference between this research and most papers in publication on CPS is that most other research focuses on the performance of the CPS rather than on the correctness …


Hardware Based Testing Of Communication Based Control For Dc Microgrid, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed Nov 2017

Hardware Based Testing Of Communication Based Control For Dc Microgrid, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper further describes our work presented in Industry Application Society 2016 Conference, with more details related to the control and operation of the microgrid. The DC microgrid facility was custom designed and implemented at CCNY with minimal off-the-shelf components to enable flexibility and reconfiguration capability. The design steps, requirements, and experimental results of the developed testbed were discussed. As a case study, a central controller for energy management algorithm was developed and tested under several operational scenarios. The experimental results verify the applicability of the developed testbed for validating DC microgrid controllers.


Applications Of Krylov Subspace And Balanced Truncation Model Order Reduction In Power Systems, Sebastian Emanuel Garrido May 2017

Applications Of Krylov Subspace And Balanced Truncation Model Order Reduction In Power Systems, Sebastian Emanuel Garrido

Graduate Theses and Dissertations

Dynamic representations of power systems usually result in the order of hundreds or even thousands of buses. Therefore, reduction of these dynamic representations is convenient. Two applications of model order reduction in power systems are discussed in this thesis. First, Krylov subspace-based method is applied to the IEEE-123 Node Test Feeder in the context of distribution-level power systems simulation. Second, a Balanced Truncation-based model reduction is implemented in the 3-Machine 9-Bus system for designing a power system controller in the context of generation- and transmission-level power systems.

First, for the IEEE-123 Node Test Feeder, a two-sided Arnoldi algorithm is proposed …


A Hybrid State/Event Driven Communication-Based Control For Dc Microgrids, Yusef Esa Jan 2017

A Hybrid State/Event Driven Communication-Based Control For Dc Microgrids, Yusef Esa

Dissertations and Theses

The U.S. electric power industry is undergoing unprecedented changes triggered by the growing electricity demand, and the national efforts to reduce greenhouse gas emissions. Moreover, there is a call for increased power grid resiliency, survivability and self-healing capabilities. As a result of these challenges, the smart grid concept emerged. One of the main pillars of the smart grid is microgrids. In this thesis, the technical merits of clustering multiple microgrids during blackouts on the overall stability and supply availability have been investigated.

We propose to use the existing underground distribution grid infrastructure, if applicable, during blackouts to form microgrid clusters. …


Interpreting, Stephanie Jo Kent Aug 2014

Interpreting, Stephanie Jo Kent

Doctoral Dissertations

What do community interpreting for the Deaf in western societies, conference interpreting for the European Parliament, and language brokering in international management have in common? Academic research and professional training have historically emphasized the linguistic and cognitive challenges of interpreting, neglecting or ignoring the social aspects that structure communication. All forms of interpreting are inherently social; they involve relationships among at least three people and two languages. The contexts explored here, American Sign Language/English interpreting and spoken language interpreting within the European Parliament, show that simultaneous interpreting involves attitudes, norms and values about intercultural communication that overemphasize information and discount …


A Survey Of Electronic Environmental Controllers, Richard S. Gates, Douglas G. Overhults, Larry W. Turner May 1992

A Survey Of Electronic Environmental Controllers, Richard S. Gates, Douglas G. Overhults, Larry W. Turner

Biosystems and Agricultural Engineering Faculty Publications

Sixteen commercially available electronic environmental controllers were evaluated. The units were classified according to enclosure type, analog versus microprocessor based control, power supply, sensors, alarms, control relays and triac output, interval timers, outside temperature feedback, and retail price. An assessment of these controllers indicated several critical limitations in the application of this technology.

The use of integrated controllers for animal production has the potential for substantial improvements in production efficiencies. If the limitations observed in the present controller technology, as represented by this sample, are addressed, industry acceptance of the technology can be accelerated. A uniform standard to address this …