Engineering Commons^™

Performance Enhancement And Characterization Of An Electromagnetic Railgun, Paul M. Gilles

Master's Theses

Collision with orbital debris poses a serious threat to spacecraft and astronauts. Hypervelocity impacts resulting from collisions mean that objects with a mass less than 1g can cause mission-ending damage to spacecraft. A means of shielding spacecraft against collisions is necessary. A means of testing candidate shielding methods for their efficacy in mitigating hypervelocity impacts is therefore also necessary. Cal Poly’s Electromagnetic Railgun was designed with the goal of creating a laboratory system capable of simulating hypervelocity (≥ 3 km/s) impacts. Due to several factors, the system was not previously capable of high-velocity (≥ 1 km/s) tests. A deficient projectile …

Design Of The 21-Meter Network Monitor And Control System For Deep Space Network Cross Support, Sarah E. Wilczewski

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science Morehead State University in Partial Fulfillment of the Requirements for the Degree Master of Science by Sarah E. Wilczewski on September 26, 2019.

Experimental And Numerical Analysis Of Quasi-Static Deformation Mechanisms Of Additively Manufactured Lattice Structures, Behzad Bahrami Babamiri

Von Braun Symposium Student Posters

No abstract provided.

Evaluation Of Varying Surface Finishes On Thin-Walled Blown Powdered Deposition Inconel 625, Noah Naden, Giancarlo Puerto, Judy Schneider

Von Braun Symposium Student Posters

No abstract provided.

Aircraft Hydraulic Systems - Fundamentals, Nihad E. Daidzic

Aviation Department Publications

Aircraft hydraulic systems are essential non-propulsive power systems. Hydraulic power systems are used to power major functional aircraft systems, such as flight controls (primary and secondary), friction braking, nose gear steering, thrust-reversers, operating heavy cargo doors, etc.

Cubesat Astronomy Mission Modeling Using The Horizon Simulation Framework, Alexander W. Johnson

Master's Theses

The CubeSat Astronomy Network is a proposed system of multiple CubeSat spacecraft capable of performing follow-up observations of astronomical targets of interest. The system is intended to serve as a space-borne platform that can complement existing systems utilized for astronomical research by undergraduate and high school students. Much research and development work has been performed to develop model-based system engineering methodologies and products for CubeSat missions, including the Horizon Simulation Framework. The Horizon Simulation Framework enables the development of system models using the Extended Markup Language (XML), and its simulation program can generate system simulations over model-specified timespans. System requirements …

Many-Objective Hybrid Optimization Under Uncertainty With Applications, Sohail Reddy

FIU Electronic Theses and Dissertations

A novel method for solving many-objective optimization problems under uncertainty was developed. It is well known that no single optimization algorithm performs best for all problems. Therefore, the developed method, a many-objective hybrid optimizer (MOHO), uses five constitutive algorithms and actively switches between them throughout the optimization process allowing for robust optimization. MOHO monitors the progress made by each of the five algorithms and allows the best performing algorithm more attempts at finding the optimum. This removes the need for user input for selecting algorithm as the best performing algorithm is automatically selected thereby increasing the probability of converging to …

A Homegrown Dsmc-Pic Model For Electric Propulsion, Dominic Charles Lunde

Master's Theses

Powering spacecraft with electric propulsion is becoming more common, especially in CubeSat-class satellites. On account of the risk of spacecraft interactions, it is important to have robust analysis and modeling tools of electric propulsion engines, particularly of the plasma plume. The Navier-Stokes equations used in classic continuum computational fluid dynamics do not apply to the rarefied plasma, and therefore another method must be used to model the flow. A good solution is to use the DSMC method, which uses a combination of particle modeling and statistical methods for modeling the simulated molecules. A DSMC simulation known as SINATRA has been …

Innovative Schematic Concept Analysis For A Space Suit Portable Life Support Subsystem, M. Schuller, R. Kobrick, T. Lalk, L. Wiseman, F. Little, Et Al.

Ryan L. Kobrick

Conceptual designs for a space suit Personal Life Support Subsystem (PLSS) were developed and assessed to determine if upgrading the system using new, emerging, or projected technologies to fulfill basic functions would result in mass, volume, or performance improvements. Technologies were identified to satisfy each of the functions of the PLSS in three environments (zero-g, Lunar, and Martian) and in three time frames (2006, 2010, and 2020). The viability of candidate technologies was evaluated using evaluation criteria such as safety, technology readiness, and reliability. System concepts (schematics) were developed for combinations of time frame and environment by assigning specific technologies …

Defining An Abrasion Index For Lunar Surface Systems As A Function Of Dust Interaction Modes And Variable Concentration Zones, Ryan L. Kobrick, David M. Klaus, Kenneth W. Street Jr.

Ryan L. Kobrick

Unexpected issues were encountered during the Apollo era of lunar exploration due to detrimental abrasion of materials upon exposure to the fine-grained, irregular shaped dust on the surface of the Moon. For critical design features involving contact with the lunar surface and for astronaut safety concerns, operational concepts and dust tolerance must be considered in the early phases of mission planning. To systematically define material selection criteria, dust interaction can be characterized by two-body or three-body abrasion testing, and sub-categorically by physical interactions of compression, rolling, sliding and bending representing specific applications within the system. Two-body abrasion occurs when a …

A Technology Survey Of Emergency Recovery And Flight Termination Systems For Uas, Richard Stansbury, Wesley Tanis, Timothy Wilson

Richard Stansbury

For safe flight in the National Airspace System (NAS), either under the current interim rules or under anticipated longer-term regulatory guidelines facilitating unmanned aircraft system (UAS) access to the NAS, the UAS must incorporate technologies and flight procedures to ensure that neither people nor property in the air, on the ground, or on or in the water are endangered by the failure of an onboard component, by inappropriate unmanned aircraft (UA) response to pilot commands, or by inadvertent entry by the UA into prohibited airspace. The aircraft must be equipped with emergency recovery (ER) procedures and technologies that ensure that …

Comparison Of Induced And Parasitic Drag On Wings With Minimum Induced Drag, Sarah A. Abdel-Motaleb

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Minimizing the induced drag for steady level flight is a variational problem that requires solving for the optimum lift distribution given a set of design constraints. From lifting-line theory, minimizing the induced drag is, in part, achieved by varying the Fourier coefficients used to describe the section lift. The elliptic lift distribution minimizes the induced drag for a wing with fixed weight and wingspan by setting all but the first coefficient to zero. If wingspan is allowed to vary, a negative third Fourier coefficient is utilized to reach an optimum lift distribution that further reduces the induced drag for stress-limited …

System Architecture Design And Development For A Reusable Lunar Lander, Chad Batten, Camille E. Bergin, Aaron Crigger, Darryl Harris, Gillian Suzanne Mcglothin

Chancellor’s Honors Program Projects

No abstract provided.

Fast Yield Estimation Of Multi-Band Patch Antennas By Pc-Kriging, Xiaosong Du, Leifur Leifsson, Slawomir Koziel

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The PC-Kriging metamodeling method is proposed for yield estimation of multi-band patch antennas. PC-Kriging is a combination of polynomial chaos expansion (PCE) and Kriging metamodeling, where PCE is used as a trend function for the Kriging interpolation metamodel. The method is demonstrated on the Ishigami analytical function and a dual-band patch antenna. The PC-Kriging is shown to reach the prescribed accuracy limit with significantly fewer training points than both PCE and Kriging. This translates into considerable computational savings of yield estimation over alternative metamodel-based procedures and direct EM-driven Monte Carlo simulation. The saving are obtained without compromising evaluation reliability.

Extreme Altitude Search And Rescue Helicopter, Matthew J. De Sieno, Anthony Chavarria, David Stuver, Zach Boss

Senior Design Project For Engineers

The goal of this design was to develop an extreme altitude rescue helicopter capable of retrieving hikers stranded on top of Mount Everest. Using the Eurocopter AS350 as a baseline, a conceptual model was produced that is fully capable of hovering and delivering forward flight at the desired altitude of 8,848 meters. Combined blade element momentum theory, proper airfoil selection, and forward flight calculations were utilized in order to optimize the rotor for the given flight conditions on top of Mount Everest. Conceptual fluid dynamics and CAD modeling aided in the process of visually designing the fuselage and rotor. Not …

New Design Of An Electronic Power System For The Cosmic X-Ray Background Nanosatellite-3, Christian Joel Ortiz-Huertas

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Christian Joel Ortiz Huertas on April 24, 2019.

Incidence Of An Astronaut Not Sealing The Pressure Garment Visor On Reentry, Cameron M. Smith, Trent Tresch

Journal of Human Performance in Extreme Environments

Audiovisual records of a Project Mercury pilot’s activities during an orbital flight indicate that his visor was left open during reentry and descent to the sea surface, phases of flight during which cabin pressure loss was to be mitigated by suit pressurization; however, the suit could not have been pressurized with the visor open. Thus, for a presently unknown reason, a critical safety step—sealing the visor and making a pressure suit integrity test before reentry—was overlooked in this flight. Later, Space Shuttle flights were carried out with visors unsealed for much of the launch and landing phases, with the false …

Lasers For Communication And Coordination Control Of Spacecraft Swarms, Himangshu Kalita, Leonard Dean Vance, Vishnu Reddy, Jekan Thanga

Space Traffic Management Conference

Swarms of small spacecraft offer whole new capabilities in Earth observation, global positioning and communications compared to a large monolithic spacecraft. These small spacecraft can provide bigger apertures that increase gain in communication antennas, increase area coverage or effective resolution of distributed cameras and enable persistent observation of ground or space targets. However, there remain important challenges in operating large number of spacecrafts at once. Current methods would require a large number of ground operators monitor and actively control these spacecraft which poses challenges in terms of coordination and control which prevents the technology from scaled up in cost-effective manner. …

Project Atlas: A Mobile Universal Rocket Engine Test Stand, Collin Mickels, Conrad H. Wright, Noah Soderquist, Alona Prokofieva, Sattar Panahandehgar, Naveen Sri Uddanti, Alcuin Rajan

Student Works

Project Atlas is a mobile, trailer-mounted, rocket engine test stand developed by Experimental Rocket Propulsion Lab (ERPL) at Embry-Riddle Aeronautical University’s Daytona Beach, Florida campus. The integrated test stand and automated data-acquisition and control system supports ERPL’s multitude of engine research projects, including bipropellant liquid and hybrid rocket engines. The need for an integrated universal mobile test stand stems from the inability to conduct frequent test fires on campus due to Class-3 airspace and liability issues. The test stand is designed as a horizontal thrust structure utilizing a dual flame duct to redirect and cancel reaction forces acting upon the …

Landing-Gear Impact Response: A Non-Linear Finite Element Approach, Tuan H. Tran

UNF Graduate Theses and Dissertations

The primary objective of this research is to formulate a methodology of assessing the maximum impact loading condition that will incur onto an aircraft’s landing gear system via Finite Element Analysis (FEA) and appropriately determining its corresponding structural and impact responses to minimize potential design failures during hard landing (abnormal impact) and shock absorption testing. Both static and dynamic loading condition were closely analyzed, compared, and derived through the Federal Aviation Administration’s (FAA) airworthiness regulations and empirical testing data.

In this research, a nonlinear transient dynamic analysis is developed and established via NASTRAN advanced nonlinear finite element model (FEM) to …

Dual Graphene Patch Antenna For Ka Band Satellite Applications, Mohammed Amin Rabah, Mohammed Bekhti

International Journal of Aviation, Aeronautics, and Aerospace

Currently; grapheme offers a new opportunity to use in space technology and this is due to its amazing properties like conductivity, strength, flexibility and transparency which allows us to exploit new generation of ultra-fast nanoscale components; Since future wireless communication techniques are geared towards the use of the high frequency spectrum and many recent research prove this trend. This letter presents a proposal for design of a dual graphene-based antenna to use in new communication techniques in Ka band, where the proposed antenna can work for uplink and dowlink frequencies at same time since it has return loss less then …

Effect Of Chemical Reactions On The Fluidic Thrust Vectoring Of An Axisymmetric Nozzle, Rachid Chouicha, Mohamed Sellam, Said Bergheul

International Journal of Aviation, Aeronautics, and Aerospace

Abstract:

During the last years, several thrust control systems of aerospace rocket engines have been developed. The fluidic thrust vectoring is one of them; it is simple in design and offers a substantial gain in weight and in performance. Most of studies related to this device were carried out with cold gas. It’s quite legitimate to expect that the thermophysical properties of the gases may affect considerably the flow behavior. Besides, the effects of reacting gases at high temperatures, under their effects all flow parameters like to vary.

This study aims to develop a new methodology that allows studying and …

Swat Operations Unmanned Vehicle, John K. Zelina, Tyler Meadows, Ryan Cook, Mathew Fellows

Williams Honors College, Honors Research Projects

During SWAT operations, it is common to have a barricaded suspect who may be armed and a serious threat to SWAT team personnel. In these cases, sending a robot into harm's way to assess the situation as opposed to an operator has become the standard. The purpose of this of this research was to design and develop an unmanned system for the City of Akron's SWAT Team that can be injected into these scenarios to improve outcomes and mitigate risk to SWAT operators.

A Systems And Cost Analysis Of Human Rated Mars Entry, Descent, And Landing Vehicles, Paul Daniel Friz

Doctoral Dissertations

"Cost is one of the biggest obstacles to sending humans to Mars. However, spacecraft costs are typically not taken into consideration until after the preliminary vehicle and mission concepts have been designed. Once costs have been estimated, managers and project teams often lack confidence that the final cost of the mission will match the preliminary estimates. The present work provides a robust methodology for using cost as a valid metric early in the design phase of future human Mars Entry, Descent, and Landing (EDL) vehicles. This is done in three parts. First, state of the art parametric costing methods are …

The Application Of Signal Detection Theory Principles To Aircraft Certification, John M. Maris Ph.D, Alexander V. Ilyin Ph.D

International Journal of Aviation, Aeronautics, and Aerospace

This paper presents the application of Signal Detection Theory (SDT) concepts to the certification of optional systems that provide operational or system safety benefits. The method and analysis yield quantitative requirements for the system performance that account for the risks and benefits of the potential system. This is in contrast to the standard certification approach which only focuses on Failure Conditions, and does not examine potential system benefits. A case study of an aircraft spotter on an electronic moving map illustrates that substantial safety improvements may be achieved even with the relatively low levels of software reliability associated with Commercial …

Effects Of A Hand Luggage Guiding System On Airplane Boarding Time And Passenger Experience, Mirte Vendel, Sagar Dangal, Jessica Coppens, Suzanne Hiemstra-Van Mastrigt, Peter Vink

International Journal of Aviation, Aeronautics, and Aerospace

This research investigates whether a hand luggage guiding system in overhead bins decreases boarding time and improves boarding experience during aircraft boarding process. A guiding system was developed which allocates and displays the passengers luggage space in the overhead bin. The allocated space is guided by a light strip in front of the display that blinks when a passenger comes close to their allocated luggage space. This system was tested in a Boeing 737 test fuselage. Compared to regular boarding, a boarding time reduction of 16 to 23 seconds was estimated using the hand luggage guiding system in groups of …

Global Aviation System: Towards Sustainable Development, Marina P. Bonser Dr.

International Journal of Aviation, Aeronautics, and Aerospace

Aviation around the world has integrated into a global system. As the integration process continues, more aspects and levels of it need to be lead towards the sustainable development of the whole system via advancing strategic management, global communication proficiency, and technological expertise. It becomes essential to enrich global language (English) proficiency with cross-cultural communication competence not only for communication in the air but also for airport security, passenger and cargo services, aircraft and equipage engineering, building, and maintenance. Nowadays lower levels of management need more advanced strategic thinking and problem solving skills, and higher levels of management need global …

Design And Realization Of An Unmanned Aerial Rotorcraft Vehicle Using Pressurized Inflatable Structure, Nirmal Sadasivan

International Journal of Aviation, Aeronautics, and Aerospace

Unmanned aerial rotorcraft vehicles have many military, commercial and civil applications. There is a necessity to advance the performance on several ranges of rotorcraft for using these vehicles successfully in the expanded future roles. A lower flight time, noise disturbance and safety issues remain the key obstacles in increasing the efficiency of the rotorcraft for various applications. This work presents the design and realization of a rotorcraft using pressurized inflatable structure filled with lighter than air gas such as helium or hydrogen to provide lift assistance for the vehicle. Two iterative design procedures were developed for designing the vehicle. One …

Optimization And Analysis Of An Elite Electric Propulsion System, Mehakveer Singh, Kapil Yadav, Satnam Singh, Vikas Chumber, Harikrishna Chavhan

International Journal of Aviation, Aeronautics, and Aerospace

Abstract- Electric propulsion has a promising system to create new possibilities in this technological era as well as control the harmful gaseous emission. This paper put a vision on several parameters of electric propulsion. The engine’s performance is comparable to the current propulsion devices and provides a lightweight solution to the robust technologies’ dependent on chemical energy sources. There are a plethora of factors which is enhanced by electric propulsion such as, overall efficiency, capabilities, and robustness of future air vehicles as well as mainly overcome from exhaust hazards. Electric propulsion systems have the potential of utilizing the electrically-driven propulsion …

Improving The Delivered Specific Impulse Of Composite Rocket Propellant Through Alteration Of Chemical Composition: Methodology And Parameters For Characterization Of Propellant And Validation Of Simulation Software Common To The Amateur Rocketry Community, Isaac O'Brien, Austin Ryan

Williams Honors College, Honors Research Projects

In this study, two solid composite rocket propellants were designed utilizing ProPEP, a rocket propellant formulation software common in the amateur and hobby rocketry communities. The two propellants were designed to optimize specific impulse relative to a literature propellant designed by 1020 Research Labs. The literature propellant was also tested in order to validate the design of experiment as well as the mixing and testing procedures. All three propellants, which includes the literature propellant RCS-P, and the two novel propellants AKR-P1 and AKR-P2 were characterized with static tests. The results of the static tests provide data on propellant performance and …