Engineering Commons^™

Truss Bridge Damage Localization And Severity Estimation Using Influence Lines, Hamoud Alshallaqi

Civil and Environmental Engineering Theses and Dissertations

The safety of bridges is one of the primary concerns of researchers, engineers, and bridge owners and managers, especially when bridges are approaching the end of their intended service lives. The estimation of bridge condition and remaining service life is critical to prioritize the allocation of available funding for repairs and rehabilitation. Various methods, including both dynamic and static approaches, have been developed to detect and localize bridge damage and estimate its severity. This research presents a methodology for detecting a single damaged member in a truss bridge and estimating the severity of the damage using static vertical deflection influence …

Behaviour Of Transmission Line Conductors Under Tornadoes, Dingyu Yao

Electronic Thesis and Dissertation Repository

Transmission line (TL) structure failures caused by tornadoes have been observed in multiple countries around the globe. The objective of this study is to develop an accurate load case that can simulate the critical tornado forces transmitted from the TL conductors to the towers. In order to achieve the goal, three different tornado wind fields, which were previously developed using computational fluid dynamic simulations, are considered. The tornado wind field provides the most critical forces on the TL conductors is determined and considered to obtain the critical load cases. Using the critical wind field, parametric studies are conducted to identify …

Thermal And Mechanical Numerical Modeling Of Extrusion-Based 3d Printed Reinforced Polymers For Selecting Manufacturing Process Parameters, Sunil Bhandari

Electronic Theses and Dissertations

Extrusion-based 3D printing of thermoplastic polymer composites manufactures parts that have nonhomogenous, orthotropic, and process-dependent macro-scale material properties. As a part of the dissertation, research works were carried out to: • improve the interlayer mechanical properties and reduce the orthotropy, • use experimentally homogenized orthotropic material properties to numerically model the mechanical behavior of the non-homogenous orthotropic 3D printed parts, • create an efficient numerical thermal model to predict the process-dependent thermal history of the 3D printed part, and • aid the manufacturing process by selecting a suitable set of processing parameters based on a simplified sequentially coupled thermomechanical model. …

Behavior Of Wind Turbine Towers And Blades Under Tornado Wind Fields, Mohamed Abugazia

Electronic Thesis and Dissertation Repository

The installation rate of wind turbines around the world is increasing significantly. Therefore, wind turbine farms are constructed in plentiful wind resources areas that put a considerable number of wind turbine towers under severe wind conditions. As a result, failures due to unexpected wind loads on either the blades or the tower are increasing. In addition, wind turbines are designed to resist synoptic wind loads as per the current guidelines, which do not consider high-intensity wind (HIW) events such as tornadoes. The built-in-house numerical code “HIW-WT” has been developed in this study to model wind turbines under three-dimensional wind fields …

Field Durability Test Of Clt Wall Envelope Using Physical Barriers Against Termites And Structural Performance Of Nailed Hold-Down Brackets Connected To Fungus-Exposed Clt Walls, Kamal Neupane

Theses and Dissertations

The effectiveness of using commercial polyethylene flashing and stainless-steel mesh in CLT wall systems as the termite barriers were evaluated in a short-term field test. American Wood Protection Association (AWPA) E21's visual ratings ranged from 10 to 9 in the specimens showing little damage when no physical barriers were used. Termites were able to crawl beyond the physical barriers in few specimens showing the necessity of further research on height and installation method of physical barriers. On the second part, the effect of decay caused due to Postia placenta, a brown-rot fungus, on the structural performance of hold-down brackets connected …

Effects Of Bonding Pressure And Lamina Thickness On Mechanical Properties Of Clt Composed Of Southern Yellow Pine, Cody S. Bates

Theses and Dissertations

This study produced cross-laminated timber panels at a range of four lamina thickness (5/8, 1, 1 1/8, and 1 1/4 inch) and three bonding pressures (50, 125, 200 psi), producing a total of 12 panels for mechanical testing. The goal of this study is to observe how the thickness and pressure trends affect the mechanical properties of CLT. Tests include flatwise bending, flatwise shear, internal-bond, and delamination. Results showed that bending MOE decreases as the panel thickness increases while bonding pressure had no significance. Bending MOR was less significant for the thickness and more significant for pressure compared to the …

Additive Manufacturing Of Soil Using Bio-Cementation, Christina Childress

Graduate Theses and Dissertations

Microbially Induced Calcite Precipitation (MICP) is an emerging soil treatment technique that is proven to increase strength, decrease erosion, reduce liquefaction risk, enhance slope stability, decrease compressibility, decrease swelling potential, and overall create a more competent soil. The benefits and applications of MICP are broad, and this research seeks to broaden them further by developing a single-phase additive manufacturing application with no treatment time delay. This is done by analyzing layering behaviors of five USCS soil classifications (100 % Ottawa sand, sand clay mixtures, and 100% lean clay) which provides insight into process variables such as the solution volume and …

Shear Strength Of Concrete Beams Made With Belitic Calcium Sulfoaluminate Cement, Caleb W. Chesnut

Graduate Theses and Dissertations

The need for a cleaner alternative to portland cement (PC) concrete has led to increasing interest in alternatives to PC. Structural properties of most of these alternative cements are still an open research topic. One promising alternative cement is belitic calcium sulfoaluminate (BCSA) cement. The study presented in this paper investigated the shear strength, long term compressive strength, and carbonation in BCSA cement and PC concrete beams. A total of twelve eight-foot long beams were made; eight BCSA cement concrete beams and four PC concrete beams to be tested at various ages depending on cement type. Two beams of each …

Seismic Performance Assessment Of Building Contents: Monetary Losses And Injuries, Sereen Majdalaweyh

All Dissertations

Building contents include all the components that are not attached to the building which the owners place after the construction phase, such as furniture, electrical equipment, glassware, and other personal items. Loss and damage assessment of building contents proved to be challenging in performance-based earthquake engineering frameworks because of the data sparsity. Damages to building contents during an earthquake not only cause monetary losses; tumbling and over-toppling of heavy building contents could result in injuries and even deaths of occupants. While major advancements have been made in performance-based earthquake engineering; however, the focus is mainly on damages and collapse risk …

Hybrid Structural Health Monitoring Using Data-Driven Modal Analysis And Model-Based Bayesian Inference., Jice Zeng

Electronic Theses and Dissertations

Civil infrastructures that are valuable assets for the public and owners must be adequately and periodically maintained to guarantee safety, continuous service, and avoid economic losses. Vibration-based structural health monitoring (VBSHM) has been a significant tool to assess the structural performance of civil infrastructures over the last decades. Challenges in VBSHM exist in two aspects: operational modal analysis (OMA) and Finite element model updating (FEMU). The former aims to extract natural frequency, damping ratio, and mode shapes using vibrational data under normal operation; the latter focuses on minimizing the discrepancies between measurements and model prediction. The main impediments to real-world …

Development And Promotion Of Mass Timber Noise Barrier For Highways, Harsh Bothra

All Theses

Highways are some of the biggest causes of noise pollution in the United States of America. To deal with the traffic noise coming from these highways, noise barriers have been erected across major highways. The goal is to reduce as much noise as possible through a sustainable solution. Unfortunately, the use of steel and concrete, commonly used materials, have undesired environmental impacts. A suggested sustainable alternative material would be mass timber. Mass timber products such as cross-laminated timber (CLT) and mass plywood panels (MPP) has attracted the attention of the construction industry in the U.S, as they are sustainable, light, …

Improve The Prediction Of Camber, Deflection, And Prestress Losses In Precast, Prestressed Concrete Bridge Girders, Ahmed Ali Hussein Al Mohammedi

Graduate Theses and Dissertations

Many precast, prestressed concrete girders have camber less or higher than the design values. This discrepancy between the design and the actual camber creates construction problems when installing the cast-in-place concrete deck. The objective of this research was to improve the accuracy of estimating long-term camber, deflection, and prestress losses of precast, prestressed concrete girders.

The experimental program consisted of measuring concrete properties and performing field measurements of camber, deflection, and prestress losses for girders in Arkansas. The investigation involved testing nine full-scale girders from two prestressed concrete plants that regularly supply concrete girders to bridge projects in Arkansas. The …

Relating The Dongre Workability Test To Cold In-Place Recycled Asphalt Pavements, Gus Williams

Civil Engineering Undergraduate Honors Theses

The Dongre Workability Test (DWT) is a test for determining an asphalt pavement’s relative workability from the stress-strain curve of a sample. While the DWT has seen favorable results with warm mix and hot mix asphalt, Casillas and Braham (2020) attempted to apply this test to cold in-place recycled (CIR) asphalt pavements with limited results. This paper looked at the process of reexamining the DWT method to more favorable results with CIR samples. Phase 1 consisted of defining ten possible metrics from the stress-strain curve and applying them to samples with three different curing conditions. From these preliminary results, the …

Connected And Automated Vehicles: Their Implication On Capacity Of A Basic Freeway Section And Impacts On Walkway Safety, Sia Macmillan Lyimo

Dissertations

Autonomous vehicles have recently gained the attention of researchers due to their expected potential benefits on highway traffic streams, such as improving roadway capacity, among others. It is imperative to investigate how these expected benefits can be leveraged in the transportation sector. Understanding the safety and operational benefits helps the concerned transportation agencies and other key stakeholders to make necessary infrastructural and policy adjustments to accommodate such future traffic operation changes. The main goal of this dissertation is to study the impact of connected and automated vehicles on freeway capacity. The simulated environment was created to emulate autonomous vehicle behaviors, …

Gaylord Produce Removal Machine, Marcus Takashi Hirose Lee, Jacob Michael Perlman, Carissa Abigail Kamm, Mark Misao Loera

Mechanical Engineering

This Final Design Review Report outlines the senior design project that began Winter Quarter of 2021 at California Polytechnic State University. Our team consists of three mechanical engineers and a general engineer, working together to design, build, and test a product for Alameda County Food Bank. The goal of the final product is to relieve volunteers and employees of tedious manual labor and increase efficiency during the removal of produce from large Gaylord containers. This document describes background research, the objectives of the project, chosen concept design, analysis and initial prototyping of said concept, the final design, and verification prototype …

Development Of Lambda Factors For Masonry Design With Lightweight Grout, Rumi Shrestha

All Theses

Reduction in structural mass, improvement in thermal performance, and reduction in shrinkage cracking through internal curing are some of the reasons that lightweight (LW) aggregates have been used in structures and pavements for decades. However, lightweight grout is still not permitted for use in reinforced masonry construction by the TMS 402/602-16 code. In order to realize the benefits of lightweight grout in U.S. reinforced masonry construction, a codified procedure for its use is required which must be informed by experimental testing.

This research is a pilot project directed to characterize the performance of LW grout in comparison to normal weight …

Effects Of The Soil Spatial Variability On Pipelines, Jose Luis Espinosa Mendez

Electronic Thesis and Dissertation Repository

Pipelines are the safest and most efficient way to transport large volumes of oil and gas from extraction fields, to refineries, industry and home consumption. Extensively used to transport fluids over long distances, pipelines may pass through terrain features exposed to geohazards. The performance of buried pipelines in areas subjected to ground displacements constitute a criterion for design, assessment and management of gas pipelines, to ensure public, environment and property safety in a cost-effective manner. Modern surveying and sampling techniques allow for better geotechnical characterization of ground movements and the variability of the soil properties with confidence. The statistical data …

Experimental Simulation Of Tornado-Like Vortices And Their Impact On High-Rise Buildings, Arash Ashrafi

Electronic Thesis and Dissertation Repository

One of the most crucial research areas in wind engineering is tornadoes due to the widespread damages to infrastructure and the environment in North America and other parts of the world. The proper scaling of tornadoes in experimental facilities, generating tornado-like vortices (TLVs) is, therefore, an essential part of evaluating tornado-indued damages on engineered buildings. The capability of producing TLVs of length scales in the range between 1:300 and 1:150 inside the Wind Engineering, Energy and Environment (WindEEE) Dome at Western University has already been demonstrated using only one mode of the full potential of this simulator. A new mode …

A Comprehensive Protocol For Inspection And Assessment Of Aging Steel Bridges: Experiments, Computations And 3d Laser Scanning Of Field Corroded Girders, Georgios Tzortzinis

Doctoral Dissertations

According to a recent evaluation, our nation's infrastructure has increasingly presenting signs of deterioration with some elements exhibiting significant deficiencies in conditions and functionality. Regarding the transportation network condition, from the over than 600,000 bridges which are included in the National Bridge Inventory, 46,154 of them are characterized as structurally deficient with the backlog of bridge rehabilitation needs estimated at US$125 billion. Among the many aspects of structural deficiency, corrosion is considered a common cause, both for reinforced concrete and steel bridge deterioration. For steel bridges, corrosion has historically triggered bridge failures resulting to fatalities and injuries. To prevent similar …

Guía Metodológica De Diseño De Sistemas Estructurales Con Arriostramientos De Acero Estructural, Daniel Andrés Cordero Mendoza

Ingeniería Civil

Los sistemas estructurales arriostrados tipo: Pórticos Arriostrados Concéntricamente (PAC), Pórtico Arriostrado Excéntricamente (PAE) y Pórtico Arriostrado de Pandeo Restringido (PAPR); se diseñan con el fin de proporcionar a un edificio un aumento en la resistencia y rigidez lateral y así evitar el colapso de una estructura debido a grandes fuerzas de sismo. Sin embargo, la información existente sobre estos sistemas no está centralizada, no hay ejemplos matemáticos guías y no hay un texto en el cual se aborde el paso a paso del diseño. La presente investigación consiste en el desarrollo de una guía metodológica que exhiba todos los elementos …

3d Printed Concrete & Polymer Concrete For Infrastructure Applications, Daniel Heras Murcia

Civil Engineering ETDs

Additive manufacturing technology has been established as one of the fastest-growing building technologies worldwide. Three-dimensional concrete printing (3DCP) has developed an increasing interest in the last decade due to its prospects as a transformative technology for industries such as the concrete precast. Besides the improvements in automation technologies in construction, traditional construction has faced considerable challenges: high accident rates, labor dependency, significant potential for automation, and high costs associated with the use of traditional formwork. In this context, three-dimensional concrete, also referred to as physical prototyping, is a novel construction technique in which the concrete is extruded layer-to-layer. 3DCP is …

Structural Performance Of Glass Façades Exposed To Fire, Mohamed Badr

Electronic Thesis and Dissertation Repository

Glass façades are commonly used in the modern construction industry. The thesis starts by providing a general background about glass façades, their design criteria, and related previous research studies. The common concern among the previous studies was the inadequate performance of glass façades during fire incidents, which accelerates the spread and severity of the fire. This concern is magnified by the recent worldwide increase in wildfires. Thus, it is critical for engineers to be able to assess the structural performance of glass façades at elevated temperatures. The thesis addresses this need by presenting a simplified technique to model single skin …

Assessment Of Key Imperatives For Enhancing Precast Adoptability In Egypt, Mostafa Sameh

Theses and Dissertations

Precast Concrete’s modular application concept is a major construction method that has been used historically seen in various shapes, forms, and with a wide range of constituents. Examples include Ancient Egypt and China among several impressive structures in old civilizations. The major advantages of precast concrete lie in its adaptability, resilience, and versatility which makes precast concrete one of the most agile building materials. Precast concrete as we know it today has been introduced to our markets over the past several decades. Having similar advantages to that of old precast building methods, the road has been paved for wider use …

A Case Study On Medium And High Rise Timber Buildings, Moustafa El-Assaly

Electronic Thesis and Dissertation Repository

Heavy timber is the upcoming and rising star in the construction industry in the European and north American market. However, this topic is yet to be discovered. Light frame wood LFW has been used for decades but was always restricted to certain limits. Limits that heavy timber can overcome easily. In this thesis, topics related to the application of heavy timber in the construction of buildings are searched. First, a comparative study based on the Canadian market discussing the alternatives heavy timber can offer such as glulam and cross laminated timber (CLT) in comparison with LFW when applied to mid-rise …

A Restrained Beam Sub-Model Assembly (Rbsa) For Progressive Collapse Analysis, Muath Alhumaidi

Civil and Environmental Engineering Theses and Dissertations

The progressive collapse failure mode occurs in buildings when a load-carrying element is lost due to extreme events such as explosions caused by terrorist attacks or vehicular impacts. Guidelines and many researches efforts have been established in order to limit and prevent total collapse of buildings after losing a load-carrying component (e.g., a column). Two famous examples of progressive collapse are the 1968 Ronan Point apartment building kitchen explosion on the 18^th floor and the 1995 Alfred P. Murrah Federal Building bombing in Oklahoma City. Both examples resulted in fatalities and injuries. A small number of these …

Effect Of Radiation On Bond Behavior Between Concrete And Steel Bar: Development Of Experimental Protocol, Mohammed Abdelrahman

Masters Theses

There is a need to assess the effect of radiation on the behavior of bond strength between steel reinforcement and concrete. However, there is geometrical constraints in the cylindrical capsule which limit the size of concrete samples. Thus, developing a protocol to produce pullout sample and a test setup is needed.

A protocol for fabricating high-precision concrete samples with embedded \#2 steel bar has been developed based on the results of an experimental program. A pullout system has also been developed to investigate the bond activity of concrete and steel. This research looks at two different aggregate sizes 3/8 inch …

Design And Experimental Evaluation Of A Small-Scale Buckling Restrained Brace Analog, Lindsay K. Helferich

Masters Theses

In the event of an earthquake, structures experience large lateral loads that can lead to weak story mechanisms and result in premature building collapse. Strongback braced frames (SBF) are a type of seismic force resisting system that aim to evenly distribute horizontal loads up the height of the building to mitigate this failure mechanism. Previous research shows that SBFs are a promising way to better design for seismic demands, but these systems have not been fully explored to best exploit the design space. This work is a part of a project that aims to provide both numeric and experimental verification …

An Improved Earned Value Management Method Integrating Quality And Safety, Brian Briggs

LSU Doctoral Dissertations

The construction industry invests significant time and money to improve quality and safety while reducing cost and schedule impacts. The industry has a sincere desire to improve construction project management methods to improve efficiency. Historically, quality and safety underperformances result from undermanaged quality control and safety activities. The cost and schedule impacts associated with poor quality work have always had an impact on construction operations. The unprecedented challenges and uncertainties of COVID-19 highlighted the need to improve the Earned Value Management (EVM) method within construction to reflect these quality and safety activities. The central goal of this dissertation is to …

Performance Of Single And Grouped Helical Piles Under Strong Earthquake Shaking, Abdelrahman F.F. Aly

Electronic Thesis and Dissertation Repository

Full-scale shaking table testing was conducted to evaluate the seismic performance of single and grouped helical piles. Eight circular and one square helical piles with different properties as well as one driven circular pile were installed in dry sand enclosed in a laminar soil shear box that was situated on the shaking table. Dynamic properties of sand bed and its natural frequency, as well as the natural frequencies of single and grouped helical pile-soil systems were evaluated from the collected data during different shaking events. The effects of different pile configurations as well as successive shakings on the characteristics of …

Comportamiento De Los Distintos Sistemas Constructivos Para Dos Sótanos En El Suelo Lacustre De Bogotá, Julián David González Agudelo, José Luis Sierra Lozada

Ingeniería Civil

El proyecto, cuenta con una detallada investigación, en la que se comparan procesos constructivos para sótanos, y la manera como se realizan las excavaciones para los mismos, minimizando errores en el proceso y aumentando factores de seguridad con los que se trabaja en los suelos no muy resistentes, como lo es el lacustre de la ciudad de Bogotá. Además, se hace un análisis de tiempos por medio del software de administración de proyectos 'Project', y un análisis de precios unitarios para cada uno de los procesos constructivos que se trabajaron en el presente proyecto de investigación.

El proyecto, se llevó …