Engineering Commons^™

Fire-Resistance Testing Procedures For Construction Elements—A Review, Shashikant Chaturvedi, Ajitanshu Vedrtnam, Maged A. Youssef, Martin T. Palou, Gonzalo Barluenga, Kishor Kalauni

Civil and Environmental Engineering Publications

Fire accidents are a significant risk to human life and civil infrastructure. As a countermeasure, the regulatory bodies of different countries have established standards for evaluating the performance of construction elements during fire exposure. ISO 834 is the globally accepted fire-resistance testing standard. Other standards include ASTM E119, BS 476, IS 3809, JIS A 1304, AS 1503, EN 1363, and GB/T 9978, which are utilized by the US, Britain, India, Japan, Australia, Europe, and China, respectively. This article presents a summary and comparison of the fire-resistance testing standards. In reality, standard tests for isolated structural members may not efficiently portray …

Design, Concept, And Visualization Of Urban Multi-Level Growing Table Systems In Hyper Urban Areas, Aaryan Manoj Nair, Shaheed Mohammed, Omar Rahama

Publications and Research

As of a 2019 study conducted by the National Urban Gardening Program (National Urban Gardening Program), urban farming accounts for approximately 19% of the total national farming output and is expected to triple to almost 45% by 2025. There is intensive research being conducted on aspects of reduced recidivism, communal health benefits, natural carbon capture systems, improved urban ecology and the necessity for reducing the carbon footprint of food, (informally dubbed “food miles”) there is little substantive research on optimisation, and maximation of crop productivity in hyper-urban areas.

The purpose of this report is to understand the functionalities of urban …

Metal Organic Framework Modifications Of Structural Fibers, Marwan Al-Haik

Publications

A reinforced carbon composite can include a carbon sub­strate and a metal organic framework bonded to the carbon substrate. For example, a reinforced carbon composite can include a first layer, a second layer, and a resin adhered to the first layer and the second layer. The first layer can include a carbon substrate and a metal organic framework bonded to the carbon substrate. The second layer can include a carbon substrate and a metal organic framework bonded to the carbon substrate.

Investigation Of Mechanical Properties Of Recycled Fiber-Reinforced Polymer Composites Reinforcing Cement, Caleb Mull, Fnu Archie, Harry Lee, Guyuan Zhang

Discovery Undergraduate Interdisciplinary Research Internship

The usage of fiber-reinforced polymer composites in various fields has increased significantly due to their advantageous physical and mechanical properties. However, the sustainability of composite parts has not been fully solved for a long time. Most end-of-life (EOL) composite parts have been landfilled without recycling due to the recycling cost and lack of application of recycled composites. Mechanical composite recycling that shred the EOL composite part and reuse it for downgraded applications is one of the most commonly used recycling processes for the EOL composite part. In this research, mechanical composite recycling process was demonstrated for the construction application. The …

Development Of Non-Proprietary Ultra-High Performance Concrete Mixtures, Tawsif Mohammad Hasan, Levi Gilbert, Srinivas Allena, Josiah Owusu-Danquah, Anthony Torres

Civil and Environmental Engineering Faculty Publications

The development of non-proprietary Ultra-High Performance Concrete (UHPC) is one way to reduce the initial cost of construction. However, workability is a major issue for which such mixtures are not practical in field conditions. Ultra-high performance cannot be achieved in field conditions if the concrete is not placed, finished, and compacted properly during placement. In this research, six UHPC mixtures were developed (three with steel fibers and three without fibers) using materials which are readily available on the local marketplace with water-to-cementitious materials ratios ranging between 0.17 to 0.30. The workability was determined using standard ASTM flow table apparatus, and …

Developing A Robotic Simulator And Video Games For Professional And Public Training, Sushil J. Louis

Project WD-2

This project developed a simulation training software for operators to monitor and supervise autonomous robots when inspecting steel truss bridges. Since the software abstracts the command and situation visualization interface when dealing with simulated inspection robots and bridge, the same software can be connected to physical robots to control and monitor physical robots during bridge inspection. Version 1 of Simulation Training and Control (STACS) was developed and tested with two virtual bridges and one virtual climbing robot for steel truss member inspection and one virtual flying UAV for visual inspection. This version of STACS also prototyped and tested a Robot …

Seismic Performance Of Ductile Corrosion-Free Reinforced Concrete Frames, Mohamed Meshaly, Maged A. Youssef, Ahmed Elansary

Civil and Environmental Engineering Publications

Corrosion of steel bars is the main cause of the deterioration of reinforced concrete (RC) structures. To avoid this problem, steel rebars can be replaced with glass-fiber-reinforced-polymer (GFRP). However, the brittle behaviour of GFRP RC elements has limited their use in many applications. The use of shape memory alloy (SMA) and/or stainless steel (SS) rebars can solve this problem, because of their ductile behaviour and corrosion resistance. However, their high price is a major obstacle. To address issues of ductility, corrosion, and cost, this paper examines the hybrid use of GFRP, SS, and SMA in RC frames. The use of …

Semi-Annual Progress Report #11, Missouri University Of Science And Technology. Inspire - University Transportation Center

Semi-Annual Progress Reports

No abstract provided.

Reliability Of Bridge Inspection Technologies, Glenn A. Washer

INSPIRE Archived Webinars

This presentation will discuss the reliability of inspection technologies used for the condition assessment of highway bridges. Data from condition assessments are critical to asset management and decision-making. The methodologies used to assess condition are usually subjective methods, such as visual inspections, that can vary as a result of human factors and differences in training and interpretation of inspection procedures. Nondestructive evaluation technologies (NDE) are implemented on a more limited basis and rely on indirect measurements to infer the presence of damage, and these assessments are affected by environmental factors, materials variability, and limitations in the interpretation of the resulting …

Structural Performance Of Single-Skin Glass Façade Systems Exposed To Fire, Mohamed Badr, Maged A. Youssef, Salah El-Din F. El-Fitiany, Ajitanshu Vedrtnam

Civil and Environmental Engineering Publications

Purpose

Understanding the structural performance of external glass curtain walls (façades) during fire exposure is critical for the safety of the occupants, as their failure can lead to fire spread throughout the entire building. This concern is magnified by the recent increase in fire incidents and wildfires. This paper presents the first simplified technique to model single skin façades during fire exposure, and, then utilizes it to examine the structural behaviour of vertical, inclined, and oversized façade panels.

Design/methodology/approach

The proposed technique is based on conducting simplified heat transfer calculations, and, then utilizing a widely used structural analysis software to …

An Energy Dissipating Seismic Connector For Precast Concrete Shear Walls, Mohammed Aljuboori, Habib Tabatabai

Civil and Environmental Engineering Faculty Articles

In this study, several steel connector shapes were analytically evaluated as potential new seismic energy dissipating devices between vertical precast concrete shear wall panels. Based on the results of analytical and experimental studies, a multiple yield zone (MYZ) connector is proposed due to its improved performance (in energy dissipation) when compared to the conventional U-shaped flexure plate (UFP) device. Unlike the UFP, the MYZ connector provides stiffness and energy dissipation in both horizontal and vertical directions. The response of a shear wall building system utilizing the MYZ or UFP connectors was evaluated using a simplified frame model. The MYZ connector …

Contracting Strategies: A Different Approach To Address Long-Term Performance, Maria Calahorra-Jimenez

Mineta Transportation Institute

For cost-efficiency, public safety, and sustainability, improving long-term performance in highway projects is imperative for public administrations. Project delivery and procurement methods provide an opportunity to align design and construction processes with this goal. While previous studies have explored whether project delivery methods impact the long-term performance of highway projects, these studies did not focus on how core elements within project procurement relate to long-term performance. Thus, to fill this gap, this research explores how and to what extent long-term evaluation criteria are considered in design-build best-value procurement of highway projects. To this end, the team conducted content analysis on …

Shear Friction Capacity Of Corrugated Pipe Connection In Precast Footings, Fatima C. Vieira

FIU Electronic Theses and Dissertations

Prefabricated Bridge Elements and Systems (PBES) are being more widely used, as they can significantly reduce on-site construction time impacting traffic. The main concerns when using PBES are the final assembly of the elements to achieve the monolithic behavior of the structure. The currently recommend connection detail between the precast pile cap and precast pile is a pocket connection, which relies on the bearing strength between the end of the pile and pile cap and the shear friction capacity between the cast in place (CIP) plug and the precast cap. Current code expressions for shear friction include components for cohesion …

New Connection Details For Concrete Filled Tubes To Precast Concrete Elements For Accelerated Bridge Construction Applications, Fnu Sheharyar E Rehmat

FIU Electronic Theses and Dissertations

The synergistic interaction of steel and concrete in concrete filled tube (CFT) composite members improves structural performance by delaying local buckling of steel tube. Compared to localized confinement provided by discreet ties in reinforced columns, the steel tube provides continuous confinement to infill concrete which results in improved energy dissipation and ductility performance. Concrete filled tubes (CFTs) provide improved structural strength and ductility while minimizing the cost of column formwork. The construction sequence of CFT allows its use for accelerated bridge construction applications. The use of CFTs for bridges in the U.S. has been limited mainly due to lack of …

A Review Of Current Construction Guidelines To Inform The Design Of Rammed Earth Houses In Seismically Active Zones, David Thompson, Charles Augarde, Juan Pablo Osorio

Articles

Sustainability in the materials we use for construction is a prime concern, focusing on reducing the embodied energy and carbon footprints of the materials used. The cement used in concrete products is responsible for a significant proportion of Man's CO2 emissions and its production requires substantial energy input, as do fired clay products. For this reason, products formed from unfired earthen materials are of increasing interest and the current challenges include devising means of robust design for strength and to address durability concerns. One form of earthen construction that employs an in-situ method is rammed earth, and it is a …

The Living Breakwaters Pdr Efforts: Conceptual Scheduling, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy caused nearly $19 billion in damages in New York City including 69,000 residential units across the five boroughs. This disaster precipitated a post-disaster-rebuilding (PDR) project including roughly $4.2 billion in a Community Development Block Grant allocated towards PDR projects. A portion of the grant was used to construct a living breakwater in Tottenville, Staten Island, consisting of a resiliency approach to risk reduction through erosion prevention, wave energy attenuation, and enhancement of ecosystems and social resiliency to improve resistance to storms for the community of Tottenville. The ridges of each breakwater are designed with …

Integration Of Material Characterization, Thermoforming Simulation, And As-Formed Structural Analysis For Thermoplastic Composites, Philip M. Bean, Roberto A. Lopez-Anido, Senthil Vel

Civil Engineering Faculty Scholarship

An improved simulation-based thermoforming design process based on the integration of material characterization and as-formed structural analysis is proposed. The tendency of thermoplastic composites to wrinkle during forming has made simulation critical to optimized manufacturing, but the material models required are complex and time consuming to create. A suite of experimental methods has been developed for measurement of several required properties of the molten thermoplastic composite. These methods have the potential to enhance thermoplastic composites manufacturing by simplifying and expediting the process. These material properties have been verified by application to thermomechanical forming predictions using commercial simulation software. The forming …

Structural Design For Fire Conditions Of A Prototype Metal Building Using The New Proposed Appendix To Aisi S100, Xia Yan, Thomas Gernay

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

Performance-based design for fire conditions has been increasingly adopted for different structural systems over the last decade. The objective of this project is to exemplify through a case study how the newly proposed Appendix 4 to AISI S100 [1] on ‘Structural Design for Fire Conditions’ could be used by the metal building industry. The scope of work on the project includes the following:

(1) Identification of a prototype metal building to serve as an exemplar case study for the structural fire design procedure.

(2) Definition of the performance objectives and design requirements for the building in the fire situation. This …

Semi-Annual Progress Report #10, Missouri University Of Science And Technology. Inspire - University Transportation Center

Semi-Annual Progress Reports

No abstract provided.

Structural Health Monitoring: From Virtual Shakers To Machine Learning, Ahsan Kareem

Abbett Distinguished Seminar Series

Structural health monitoring (SHM) is a critical means of assessing the performance of aging civil infrastructure. Earlier studies used heavy dynamic shakers to assess the dynamics of structures, which are unwieldy and reliance has been shifted to ambient vibration of structures to extract dynamic features. This study introduces a “virtual shaker” concept that effectively replaces the physical shaker and provides all the desired features for SHM. Examples are provided along with an App that facilitates the use of this concept to identify dynamic features. A traditional structural health monitoring (SHM) operation requires a wired system, which is often termed “hub …

A Case Study Of Protecting Bridges Against Overheight Vehicles, Aly Mousaad Aly, Marc Hoffmann

Faculty Publications

Most transportation departments have recognized and developed procedures to address the ever-increasing weights of trucks traveling on bridges in service today. Transportation agencies also recognize the issues with overheight vehicles’ collisions with bridges, but few stakeholders have definitive countermeasures. Bridges are becoming more vulnerable to collisions from overheight vehicles. The exact response under lateral impact force is difficult to predict. In this paper, nonlinear impact analysis shows that the degree of deformation recorded through the modeling of the unprotected vehicle-girder model provides realistic results compared to the observation from the US-61 bridge overheight vehicle impact. The predicted displacements are 0.229 …

Fast Forest Fire Smoke Detection Using Mvmnet, Yaowen Hu, Jialei Zhan, Guoxiong Zhou, Aibin Chen, Weiwei Cai, Kun Guo, Yahui Hu, Liujun Li

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Forest fires are a huge ecological hazard, and smoke is an early characteristic of forest fires. Smoke is present only in a tiny region in images that are captured in the early stages of smoke occurrence or when the smoke is far from the camera. Furthermore, smoke dispersal is uneven, and the background environment is complicated and changing, thereby leading to inconspicuous pixel-based features that complicate smoke detection. In this paper, we propose a detection method called multioriented detection based on a value conversion-attention mechanism module and Mixed-NMS (MVMNet). First, a multioriented detection method is proposed. In contrast to traditional …

Reducing Early-Age Shrinkage Cracks Of Bridge Decks And Rails, Soumitra Das, George Morcous, Jiong Hu

UNL Student Research Days Posters, Graduate

Early-age shrinkage cracking of concrete bridge decks and rails accelerates the penetration of water and chemicals which leads to reinforcement corrosion, delamination, and eventually spalling. All this results in shorter service life, road closure, and costly repair. Development of Low-cement concrete(LCC) mix to reduce early age shrinkage crack through aggregate grading optimization was done in this research work. This approach also reduces concrete cost ($15-$20/cyd) (15–25%) and its carbon footprint (≈15%).

Experimental Analysis And Numerical Investigation Of Aerodynamics Of Elevated Structures, Nourhan Abdelfatah

FIU Electronic Theses and Dissertations

The vulnerability of low-rise residential buildings to extreme wind events, such as hurricanes, is an escalating concern due to the frequent failures and losses. Elevated low-rise structures are constructed to reduce the hydrodynamic load from surges and flooding during hurricanes. However, due to the current lack of information, wind loading on elevated coastal structures is not adequately addressed in current international guidelines. To address this knowledge gap, large-scale experimental studies were conducted to precisely determine wind effects on elevated houses with different numbers of stories and varying stilt heights. In this study, comparisons are presented on various tested configurations to …

Development Of The Uhpc Mix For 3d Printing, Buse Ilayda Oz

FIU Electronic Theses and Dissertations

This thesis utilizes the development of Ultra-High-Performance Concrete mix design for 3-Dimensional (3D) Printing purposes. 3D concrete printing offers many advantages such as the improvements in safety, quality, and productivity. Moreover, it holds a great advantage for the construction of structural elements that are difficult to construct by conventional methods. These advantages carry a huge potential for solving the aforementioned challenges.

Seven UHPC mixes have been designed and analyzed using various test setups for comparison purposes. Extrudability, flowability, buildability, and open time were measured using the fresh properties of the UHPC mixes. Mechanical properties were measured using compression test setups. …

Residual Axial Behavior Of Restrained Reinforced Concrete Columns Damaged By A Standard Fire, M. Monir M. Ajan Alhadid, Maged A. Youssef

Civil and Environmental Engineering Publications

A simplified procedure to predict the residual axial capacity and stiffness of both rectangular and circular reinforced concrete (RC) columns after exposure to a standard fire provides the means to replace the current descriptive methods. The availability of such a procedure during the design phase provides engineers with the flexibility to come up with better designs that ensure safety. In this paper, finite difference heat transfer and sectional analysis models are combined to determine the axial behavior of RC columns with various end-restraint conditions at different standard fire durations. The influence of cooling phase on temperature distribution and residual mechanical …

Toward Dexterous Aerial Manipulation Using Embodied Human-Intelligence For Bridge Inspection And Maintenance, Dongbin Kim

INSPIRE Archived Webinars

Current drones perform a wide variety of tasks in surveillance, photography, agriculture, package delivery, etc. However, these tasks are performed passively without the use of human interaction. Aerial manipulation shifts this paradigm and implements drones with robotic arms that allow interaction with the environment rather than simply sensing it. Many research groups have demonstrated aerial manipulation for various applications for over a decade. For example, in construction, aerial manipulation in conjunction with human interaction could allow operators to perform several tasks, such as hosing decks, drill into surfaces, and sealing cracks via a drone. This integration with drones will henceforth …

Bc-Dunet-Based Segmentation Of Fine Cracks In Bridges Under A Complex Background, Tao Liu, Liangji Zhang, Guoxiong Zhou, Weiwei Cai, Chuang Cai, Liujun Li

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Crack is the external expression form of potential safety risks in bridge construction. Currently, automatic detection and segmentation of bridge cracks remains the top priority of civil engineers. With the development of image segmentation techniques based on convolutional neural networks, new opportunities emerge in bridge crack detection. Traditional bridge crack detection methods are vulnerable to complex background and small cracks, which is difficult to achieve effective segmentation. This study presents a bridge crack segmentation method based on a densely connected U-Net network (BC-DUnet) with a background elimination module and cross-attention mechanism. First, a dense connected feature extraction model (DCFEM) integrating …

To Critically Review The Use Of Screencasts For Teaching Land Surveying, Eugen Niculae, Alain Chenaux

Conference papers

Screencasting tools allow for a screen capture of the actions on a computer screen with accompanying audio. This research initially reviews through the literature how screencasting has been used pedagogically and, through this primary research, the application of an existing screencast called Screencast-O-Matic and feedback from students from both Construction Management and Geospatial Surveying Undergraduate Programmes of TU Dublin, where and how it could be deployed for the surveying classes and fieldwork during the pandemic situation. This research occurred when all Irish third-level institutions lectures and tutorials moved online, and access to survey equipment for fieldwork was severely reduced. The …

Influence Of Phosphorus Sources On The Compressive Strength And Microstructure Of Ferronickel Slag-Based Magnesium Phosphate Cement, Cuirong Yan, Hongyan Ma, Zhongqiu Luo, Xintao Zhou, Luxing Wang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Electric furnace ferronickel slag (EFS) is a typical magnesium-rich industrial by-product discharged from the manufacture of nickel and iron-nickel alloys. The approach to use it as the raw material for the preparation of magnesium phosphate cement (MPC) has potential and proves effec-tive. In this study, three different phosphorus sources (PS) including phosphoric acid (H₃PO₄, PA), sodium dihydrogen phosphate (NaH₂ PO₄, SDP) and potassium dihydrogen phosphate (KH₂ PO₄, PDP) were used to react with EFS to prepare the EFS-based MPC (EMPC), and the effects of raw material mass ratio (EFS/PA, EFS/SDP, …