Engineering Commons^™

Localization Of Stationary Source Of Floor Vibration Using The Steered Response Power Method, Mohammad Royvaran

Theses and Dissertations--Civil Engineering

If the generated vibration in a building exceeds the acceptable limit design for a floor system, it is necessary to identify the source of vibration, a process known as localization. The objective of this study is the localization of stationary vibration sources, and the approach used is the steered response power (SRP) method. This method has already been shown to work well for wireless and acoustical applications to locate transmitter and sound sources, respectively. To the writer’s knowledge, this study is the first application of the SRP method to locate vibration sources using floor vibration measurements. However, because waves behave …

Artificial Intelligence And Soft Computing In Smart Structural Systems, Sajad Javadinasab Hormozabad

Theses and Dissertations--Civil Engineering

Next-generation smart cities are the key feature in the next chapter of human life. Cities that employ innovative and technology-driven solutions to improve the sustainability, resilience, prosperity, and amenity of the community are considered smart cities. Development of smart cities requires fundamental innovations in many technical and technological aspects including those contributing to smart structures. Smart technologies improve the structural performance against natural disasters like earthquakes, hurricanes, tornados, and promote the sustainability of structural systems. Next-generation smart structures encompass a variety of technologies including Structural Control (SC) and Structural Health Monitoring (SHM). SC covers methodologies and technologies that modify the …

Holistic Resilience Quantification Framework Of Rural Communities, Amanda Melendez

Theses and Dissertations--Civil Engineering

Communities need to prepare for anticipated hazards, adapt to varying conditions, and resist and recover rapidly from disturbances. Protecting the built environment from natural and man-made hazards and understanding the impact of these hazards helps allocate resources efficiently. Recently, an indicator-based and time-dependent approach was developed for defining and measuring the functionality and disaster resilience continuously at the community level. This computational method uses seven dimensions that find qualitative characteristics and transforms them into quantitative measures. The proposed framework is used to study the resilience of rural communities’ subject to severe flooding events. Harlan County in the Appalachian region is …

Evaluation Of 2-Cell Rc Box Culverts, Hossein Sharifi

Theses and Dissertations--Civil Engineering

Reinforced Concrete Box Culverts (RCBCs) are an integral part of the national and international transportation infrastructure. The National Bridge Inventory Standards (NBIS) requires that all bridges, which include culverts with spans ≥ 20 ft. (6.1 m), be load rated for safe load carrying capacity in accordance with the AASHTO Manual for Bridge Evaluation (MBE). In Kentucky, the Transportation Cabinet manages more than 15,500 bridges, of which almost 1,400 are bridge size culverts. Of the 1241 bridge size RCBCs that were being evaluated in Kentucky between 2015 and 2018, 846 were 2-cell culverts (or 68%). The objective in this study is …

Analytical Strip Method For Thin Cylindrical Shells, John T. Perkins

Theses and Dissertations--Civil Engineering

The Analytical Strip Method (ASM) for the analysis of thin cylindrical shells is presented in this dissertation. The system of three governing differential equations for the cylindrical shell are reduced to a single eighth order partial differential equation (PDE) in terms of a potential function. The PDE is solved as a single series form of the potential function, from which the displacement and force quantities are determined. The solution is applicable to isotropic, generally orthotropic, and laminated shells. Cylinders may have simply supported edges, clamped edges, free edges, or edges supported by isotropic beams. The cylindrical shell can be stiffened …

Behavior Of Rc Beams Strengthened In Flexure With Spliced Cfrp Rod Panels, Akram Rasheed Jawdhari

Theses and Dissertations--Civil Engineering

FRP laminates and fabrics, used as an externally bonded reinforcement (EBR) to strengthen or repair concrete members, have proven to be an economical retrofitting method. However, when used to strengthen long-span members or members with limited access, the labor and equipment demands may negate the benefits of using continuous EBR FRP. Recently, CFRP rod panels (CRPs) have been developed and deployed to overcome the aforementioned limitations. Each CRP is made of several small diameter CFRP rods placed at discrete spacing. To fulfill the strengthening length, CRP’s are spliced together and made continuous by means of overlaps (or finger joints).

In …

Circular Rc Columns Partially Confined With Frp, Sahar Y. Ghanem

Theses and Dissertations--Civil Engineering

Wrapping reinforced concrete (RC) columns with Fiber Reinforced Polymer (FRP) composites is effective in increasing their capacity. The current state of art concentrates primarily on fully wrapped RC columns and few studies dealt with partially wrapped columns. The majority of the studies did not account for the influence of the existing steel reinforcement on the column’s behavior. Other studies estimated the total confinement pressure as the sum of the confinement pressure due to the external FRP jacketing and due to the internal transverse steel reinforcement. Few models dealt with the coupled effect of the confinement from steel and partial FRP …

Underwater Explosion Energy Dissipation Near Waterborne Infrastructure, Paul R. Smith

Theses and Dissertations--Civil Engineering

Underwater explosions pose a significant threat to waterborne infrastructure though destructive pressure waves that can travel significant distances through the water. However, the use of bubble screens can attenuate the peak pressure and energy flux created by explosions to safe levels. This study investigates the prediction of pressure wave characteristics based on accumulated data, the damage potential of underwater explosions based on applied loads and effective material strength, and the bubble screen parameters required to prevent damage. The results were compiled to form a procedure for the design and implementation of a bubble screen the protection of waterborne infrastructure.

Life-Cycle Cost Analysis Of Reinforced Concrete Bridges Rehabilitated With Cfrp, Jeffrey L. Smith

Theses and Dissertations--Civil Engineering

The deterioration of highway bridges and structures and the cost of repairing, rehabilitating, or replacing deteriorated structures is a major issue for bridge owners. An aging infrastructure as well as the need to upgrade structural capacity for heavier trucks adds to problem. Life-cycle cost analysis (LCCA) is a useful tool for determining when the deployment of fiber-reinforced polymer (FRP) composite components is an economically viable alternative for rehabilitating deteriorated concrete bridges.

The use of LCCA in bridge design and rehabilitation has been limited. The use of LCCA for bridges on a project level basis has often been limited to the …

Deformation-Based Excavation Support System Design Method, Sekyi K. Intsiful

Theses and Dissertations--Civil Engineering

Development in urban areas around the world has steadily increased in recent years. This rapid development has not been matched by the ever decreasing open space commonly associated with urban centers. Vertical construction, thus, lends itself a very useful solution to this problem. Deep excavation is often required for urban construction. Unfortunately, the ground movements associated with deep excavation can result in damage to adjacent buildings. Thus, it is critically important to accurately predict the damage potential of nearby deep excavations and designing adequate support systems.

A new design method is proposed, as an attempt, to address the problem. The …

Vibration Of Steel-Framed Floors Supporting Sensitive Equipment In Hospitals, Research Facilities, And Manufacturing Facilities, Di Liu

Theses and Dissertations--Civil Engineering

Floors have traditionally been designed only for strength and deflection serviceability. As technological advances have been made in medical, scientific and micro-electronics manufacturing, many types of equipment have become sensitive to vibration of the supporting floor. Thus, vibration serviceability has become a routinely evaluated limit state for floors supporting sensitive equipment. Equipment vibration tolerance limits are sometimes expressed as waveform peak acceleration, and are more often expressed as narrowband spectral acceleration, or one-third octave spectral velocity.

Current floor vibration prediction methods, such as those found in the American Institute of Steel Construction Design Guide 11, Floor Vibrations Due to Human …