Open Access. Powered by Scholars. Published by Universities.®
- Publication
-
- American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present) (4)
- CCFSS Library (1939 - present) (4)
- CCFSS Newsletters (1999 - 2008) (2)
- CCFSS Technical Bulletins (1993 - 2020) (2)
- Steel Deck Institute (SDI) Specifications and Manuals (1939 - present) (1)
Articles 1 - 13 of 13
Full-Text Articles in Engineering
Design Of Automotive Structural Components Using High Strength Sheet Steels Influence Of Strain Rate On The Mechanical Properties Of Sheet Steels And Structural Performance Of Cold-Formed Steel Members, Chi-Ling Pan, Wei-Wen Yu
Design Of Automotive Structural Components Using High Strength Sheet Steels Influence Of Strain Rate On The Mechanical Properties Of Sheet Steels And Structural Performance Of Cold-Formed Steel Members, Chi-Ling Pan, Wei-Wen Yu
CCFSS Library (1939 - present)
The current design criteria for effective design width being used in the AISI Automotive Steel Design Manual 1 for the design of cold-formed steel members are based on tests under static loading condition. The primary objective of this investigation was to study the validity of these effective design width formulas for members subjected to dynamic loads. This report presents a detailed description of an experimental study. Selected steels with nominal yield strengths ranging from 25 ksi to 100 ksi were uniaxially tested under different strain rates. In order to study the structural behavior and strength of cold-formed steel members having …
Axial Load Capacity Of Sheeted Cold-Formed C And Z Members, Neil J. Glaser, Richard C. Kaehler, James M. Fisher
Axial Load Capacity Of Sheeted Cold-Formed C And Z Members, Neil J. Glaser, Richard C. Kaehler, James M. Fisher
American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
No abstract provided.
Design Provisions For Cold-Formed Steel Column And Beam Columns, Committee On Specifications For The Design Of Cold-Formed Steel Structural Members
Design Provisions For Cold-Formed Steel Column And Beam Columns, Committee On Specifications For The Design Of Cold-Formed Steel Structural Members
American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
No abstract provided.
Ccfss Technical Bulletin August 1992, Wei-Wen Yu Center For Cold-Formed Steel Structures
Ccfss Technical Bulletin August 1992, Wei-Wen Yu Center For Cold-Formed Steel Structures
CCFSS Technical Bulletins (1993 - 2020)
No abstract provided.
Ccfss News August 1992, Wei-Wen Yu Center For Cold-Formed Steel Structures
Ccfss News August 1992, Wei-Wen Yu Center For Cold-Formed Steel Structures
CCFSS Newsletters (1999 - 2008)
No abstract provided.
Shear Resistance Of Walls With Steel Studs, K. H. Klippstein, Thomas S. Tarpy Jr.
Shear Resistance Of Walls With Steel Studs, K. H. Klippstein, Thomas S. Tarpy Jr.
American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
No abstract provided.
Shear And Combined Bending And Shear Behavior Of Web Elements With Openings, Roger A. Laboube, Wei-Wen Yu, Ming-Yang Shan
Shear And Combined Bending And Shear Behavior Of Web Elements With Openings, Roger A. Laboube, Wei-Wen Yu, Ming-Yang Shan
CCFSS Library (1939 - present)
INTRODUCTION The purpose of this phase of the research project has been to investigate the behavior of a single web with web openings when subjected to either a constant shear force or a combined shear force and bending. The literature indicates that the main parameter that appears to effect the shear capacity is the ratio of web opening depth to web depth, a/h. Thus, the objective for this phase of the investigation was to experimentally determine the shear strength, and compare the tested shear strength with the computed shear strength as given by the AISI Specification for solid webs. The …
Design Of Automotive Structural Components Using High Strength Sheet Steels Mechanical Properties Of Materials, Chi-Ling Pan, Wei-Wen Yu
Design Of Automotive Structural Components Using High Strength Sheet Steels Mechanical Properties Of Materials, Chi-Ling Pan, Wei-Wen Yu
CCFSS Library (1939 - present)
INTRODUCTION It is well known that the material properties of steels and the strengths of cold-formed steel members are affected by strain rate. Therefore, the research project sponsored by the American Iron and Steel Institute (AISI) at the University of MIssouri-Rolla during the period from January 1988 through December 1991 was concentrated on a study of the effect of strain rate on mechanical properties of sheet steels and the structural behavior and strength of cold-formed steel members subjected to dynamic loads. Because the previous UMR studies were limited only to the structural members such as stub columns and beams which …
The Effect Of Flange Restraint On Web Crippling Strength, Bhavnesh H. Bhakta, Roger A. Laboube, Wei-Wen Yu
The Effect Of Flange Restraint On Web Crippling Strength, Bhavnesh H. Bhakta, Roger A. Laboube, Wei-Wen Yu
CCFSS Library (1939 - present)
PREFACE When considering the web crippling strength of a cold-formed steel member, the current edition of the AISI Specification for the Design of Cold-Formed Steel Structural Members does not distinguish between the behavior of a member having its flanges attached to a support member, and a member not attached to its support. To enhance the industry and design professional's understanding of web crippling, a pilot study was initiated at the University of Missouri-Rolla to explore the influence of flange attachment. The financial assistance for this research was provided by the Metal Building Manufacturers Association (MBMA) and the American Iron and …
Test Methods For Mechanically Fastened Cold-Formed Steel Connections, Committee On Specifications For The Design Of Cold-Formed Steel Structural Members
Test Methods For Mechanically Fastened Cold-Formed Steel Connections, Committee On Specifications For The Design Of Cold-Formed Steel Structural Members
American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
No abstract provided.
Ccfss Technical Bulletin February 1992, Wei-Wen Yu Center For Cold-Formed Steel Structures
Ccfss Technical Bulletin February 1992, Wei-Wen Yu Center For Cold-Formed Steel Structures
CCFSS Technical Bulletins (1993 - 2020)
No abstract provided.
Ccfss News February 1992, Wei-Wen Yu Center For Cold-Formed Steel Structures
Ccfss News February 1992, Wei-Wen Yu Center For Cold-Formed Steel Structures
CCFSS Newsletters (1999 - 2008)
No abstract provided.
Steel Deck Institute Design Manual For Composite Decks, Form Decks, Roof Decks, And Cellular Deck Floor Systems With Electrical Distribution, Steel Deck Institute
Steel Deck Institute Design Manual For Composite Decks, Form Decks, Roof Decks, And Cellular Deck Floor Systems With Electrical Distribution, Steel Deck Institute
Steel Deck Institute (SDI) Specifications and Manuals (1939 - present)
No abstract provided.