Engineering Commons^™

College Of Engineering Senior Design Competition Fall 2015, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Toward A More Scientifically Literate Public, Michael Bass

UCF Forum

As a society we do a terrible job of educating our children to become scientifically literate. Sure, we have STEM (Science, Technology, Engineering and Mathematics) programs throughout the country, and with some justification we can brag about the successes of students that are in or who have graduated from such learning experiences.

Is This "Transfer Shock"? Examining The Perceptions Of Engineering Students Who Articulate Within The Irish Higher Education Context., Susan O'Shaughnessy, Anne Marie Mccarrick, Fionnuala Farrell, Una Beagon, Lance C. Perez

Conference papers

Abstract—“Transfer shock” is a well-known phenomenon during the process of articulation, when students move from short-cycle applied programs to more academic longer-cycle study programs. In the US context this problematic transition has been observed in students transferring from community colleges into the traditional university system. In Ireland’s binary higher education structure, one set of institutions, known as Institutes of Technology (IoTs) allow for this transition to take place entirely within individual institutions. This paper is part of an ongoing investigation into one such IoT, where engineering students who achieve high grades at the end of 3-year (so-called Level 7) “ordinary …

Don't Just Blindly Follow All 'Green' Trends -- Do Your Research First, Michael Bass

UCF Forum

Nowadays it is politically correct to be “green” – to say and do things that seem to minimize one’s impact on the environment and to preach to others to do the same.

Assessing The Validity And Reliability Of Dichotomous Test Results Using Item Response Theory On A Group Of First Year Engineering Students, Edmund Nevin, Avril Behan, Gavin Duffy, Stephanie Farrell, Rachel Harding, Robert Howard, Aaron Mac Raighne, Brian Bowe

Conference papers

Traditional measurement instruments employed to assess the performance of student’s studying on STEM (Science, Technology, Engineering and Mathematics) related programmes typically involve classification based on final scores. The validity and reliability of these instruments and test forms are important considerations when assessing whether a student understands content and if not, where and in what way they are struggling. The aim of this study is to examine, validate and analyse the test results of first-year engineering student’s at an Institute of Higher Learning in Ireland who took the Purdue Spatial Visualisation Test of Rotation (PSVT:R). Results obtained were analysed using the …

Enhancing Freshman Engineering Instruction With In-Class Interaction Systems And E-Books, Branimir Pejcinovic, Phillip K. Wong

Electrical and Computer Engineering Faculty Publications and Presentations

Electrical engineering students in our department take a year-long series of courses which introduces electrical engineering as a discipline and provides good grounding in engineering problem solving and programing. We have recently attempted to make the second course in the sequence more engaging by applying active learning techniques, including assigned reading and exercises prior to lectures, in-class exercises using a classroom interaction system, and programming exercises during lectures. Our results are mixed: while we think that students have learned more than if we had not used these techniques, we have not completely won over our students. While using an e-book …

Development And Uses Of Iterative Systematic Literature Reviews In Electrical Engineering Education, Branimir Pejcinovic

Electrical and Computer Engineering Faculty Publications and Presentations

It is expected that most, if not all, graduate students will posses skills necessary for doing literature reviews. It is less clear how to teach these skills most effectively especially to students who are area novices and unfamiliar with review process. Systematic literature reviews offer a solid instructional framework which can be implemented across curriculum and offer an opportunity to teach course material differently so that student learn not just the literature review technique itself but also some segment of the course material. Our pilot study investigated issues related to practical implementation of systematic literature reviews in two classes, with …

Evolution Of A First-Year Engineering Course, Noah Salzman, Janet Callahan, Gary Leroy Hunt, Carol Sevier, Amy J. Moll

Electrical and Computer Engineering Faculty Publications and Presentations

The first-year engineering course at Boise State University has evolved significantly over the past decade as a result of continuous improvement with a particular focus on student retention. The course was originally created in 1999-2001 as an “Introduction to Engineering” course in order to recruit students to one of the fields of engineering, by introducing those fields of engineering as topics across the semester. Over the first ten years, the course continued that introductory-to-field focus while also introducing a significant design element solving openended engineering problems. As a result of a five-year grant aimed toward improving first-year retention, the first-year …

The Epa P3 Program: An Opportunity For Growing Student Entrepreneurs, Marc Compere, Yan Tang, Yung Wong

Publications

In this paper we will share our experiences of fostering entrepreneurial spirit through projects funded by EPA (Environmental Protection Agency) P3 (People, Prosperity, and the Planet) Program which hosts the P3 collegiate competition for designing solutions for a sustainable future. Since 2012, we have integrated the P3 competition with the capstone design course of Clean Energy Systems track in mechanical engineering as an effective educational vehicle for introducing the concept of sustainable design. Since the competition focuses on designs which have values of real world application, it is also a great opportunity to create entrepreneurial spirit. We have successfully turned …

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Higher education research

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

Assessing Impact Of Exposure To Cyberphysical Systems On Student Interest In Information Technology Careers, Mayari I. Serrano Anazco

Purdue Polytechnic Masters Theses

The main purpose of this project is to determine if the use of Information Technology (IT) tools, specifically cyberphysical devices, in outreach sessions will promote interest of young individuals in pursuing IT careers. The Diversity office of Purdue’s College of Technology offers a number of outreach sessions to a variety of target populations throughout the year. Each department in the college has an opportunity to present a session related to a field of study offered by the department. The research was carried out thru the Spring 2015 semester during the DOiT and Vision outreach programs offered through the college’s Diversity …

College Of Engineering Senior Design Competition Spring 2015, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Ensc 110 (Energy In Perspective) Bibliography, Supplementary Reading, Adam Liska

Adam Liska Papers

Energy, Thermodynamics, Complexity, Evolution, & Astronomy
Energy & Technology
Energy: Petroleum & Coal
Bioenergy, Animals, & Food
Energy & Environment
Energy & Climate Change
Energy, Oil Security, & War
Energy & Societal Collapse

Bibliography of 47 monographs

Ensc 300 (Energy Seminar) Annotated Bibliography, Supplementary Reading, Adam Liska

Adam Liska Papers

Innovation
Sociology of Innovation, Business, & Work
Sustainable Business Strategy
Leadership
Science, Engineering, & Business History
Economics
Energy, Business, & Environmental Policy
Climate Change & Insurance
Education
Ethics

62 monographic resources

An Assessment Of The Performances Of Several Univariate Tests Of Normality, James Olusegun Adefisoye

FIU Electronic Theses and Dissertations

The importance of checking the normality assumption in most statistical procedures especially parametric tests cannot be over emphasized as the validity of the inferences drawn from such procedures usually depend on the validity of this assumption. Numerous methods have been proposed by different authors over the years, some popular and frequently used, others, not so much. This study addresses the performance of eighteen of the available tests for different sample sizes, significance levels, and for a number of symmetric and asymmetric distributions by conducting a Monte-Carlo simulation. The results showed that considerable power is not achieved for symmetric distributions when …

Nue: Nano Science And Laboratory Experience (Scale) At Umaine, Rosemary L. Smith, Scott D. Collins, Michael D. Mason

University of Maine Office of Research Administration: Grant Reports

This Nanotechnology Undergraduate Education (NUE) in Engineering program entitled, "NUE: Nano Science And Laboratory Experience (ScALE) at UMaine", at the University of Maine, under the direction of Dr. Rosemary L. Smith, aims to introduce the basic concepts, applications, and implications of nanoscale science and engineering to all first-year engineering students at the University of Maine (UMaine). The proposed approach is to add nanoscience and nanoscale engineering content to the required 'introduction to' engineering courses offered by each engineering department. This content will be designed, developed and delivered as a 'drop-in' module, in collaboration with the instructors for each department's course. …

Coming Up With A Good Question Is Not Easy: A Proof, Joe Lorkowski, Luc Longpre, Olga Kosheleva, Salem Benferhat

Departmental Technical Reports (CS)

Ability to ask good questions is an important part of learning skills. Coming up with a good question, a question that can really improve one's understanding of the topic, is not easy. In this paper, we prove -- on the example of probabilistic and fuzzy uncertainty -- that the problem of selecting of a good question is indeed hard.

Sci Pop Talks! Presenter Guidelines, Kiyomi D. Deards, Raychelle Burks

UNL Libraries: Faculty Publications

Presenter guidelines for the nUniversity of Nebraska-Lincoln (UNL) Sci Pop! Talks series.

Engineering Education For High-Ability Students, Branson Lawrence, Diane Hinterlong, Laurie S. Sutherland

Publications & Research

Over the course of their careers, engineers command a breadth and depth of knowledge from science, mathematics, society, politics, and economics that is needed for continuously updating their knowledge of the latest discoveries and advances. Driven by curiosity and enabled by rapid information technology, engineers are kept abreast of the latest advancements almost instantaneously. Today’s scientific knowledge is fluid and complex, yet these traits of engineering remain constant: the ability to define structure, plan, repeatedly evaluate, and align results to the initial objective. Engineering teachers need to facilitate their students’ ability to access information effectively and to apply it appropriately, …

Professional Formation Of Engineers: Enhancing The First Year Student Experience, Eileen Goold

Conference Papers

This paper reports on a study investigating engineering students’ perceptions of engineering practice and whether engineering students’ cognitive engagement benefits from bridging the gap between the technical issues in their education and the practical realities of modern engineering practice.

Integration Of Mechatronics Design Approach Into Teaching Of Modeling Practices, Vukica M. Jovanovic, Tatiana V. Goris, Ana M. Djuric, Petros J. Katsioloudis, Nathan J. Luetke, Moustafa R. Moustafa, Basim Matrood

Engineering Technology Faculty Publications

Engineering design has transformed significantly due to advances in embedded system design and computer technologies. Almost every mechanical design today has some electrical and electronic components. Many products manufactured today contain both electrical and mechanical components and systems. Mechatronics is a design process that is multi-disciplinary in nature and integrates principles of many engineering disciplines including, but not limited to, mechanical engineering and mechanical engineering technology, electrical engineering and electrical engineering technology, and controls engineering. Mechatronic systems can be found in many different places today. These range from computer hard drives and robotic assembly systems, to washing machines, coffee makers, …

Nebraska Summary: S1017 Massey Ferguson 7722, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S989a Massey Ferguson 8727, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2122: New Holland T8.320, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2118: Case Ih Magnum 180, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2109: John Deere 9470r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2123: Case Ih Magnum 280, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2121: Case Ih Magnum 240, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2120: Case Ih Magnum 220, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2119: Case Ih Magnum 200, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …