Engineering Commons^™

Fabrication, Thermophysical, And Mechanical Properties Of Cermet And Cercer Fuel Composites For Nuclear Thermal Propulsion, Neal D. Gaffin

Doctoral Dissertations

Nuclear thermal propulsion (NTP) utilizes nuclear fission to double the efficiency of
in-space propulsion systems compared with traditional combustion rocket systems.
NTP systems are limited primarily by the fuel material choice, due to the extreme
conditions they will need to endure, including temperatures up to 3000 K, multiple
thermal cycles with rapid heating and cooling, exposure to hot flowing hydrogen,
large thermal gradients, and high neutron flux. Particle based fuels, namely ceramic-
metallic (cermet) and ceramic-ceramic (cercer) composites are both promising fuel
element material candidates for NTP. Given the high temperature nature, these
materials are difficult to fabricate and very …

Nuclear Thermal Rocket Engine Control Autonomy Via Embedded Decision, David Sikorski

Doctoral Dissertations

This doctoral dissertation presents an investigation of embedded decision capabilities as a means for developing nuclear reactor autonomous control. Nuclear thermal propulsion (NTP) is identified as a high priority technology for development, and is the focus of this research. First, a background investigation is presented on the state of the art in nuclear thermal rocket (NTR) engine control and modeling practices, resulting in the development of a low order NTR engine dynamic model based on the literature. The engine model was used to perform the following investigation, and is intended to serve as a research platform for the future development …

Fundamental Studies Of Electrochemical Reactions And Microfluidics In Proton Exchange Membrane Electrolyzer Cells, Jingke Mo

Doctoral Dissertations

In electrochemical energy devices, including fuel cells, electrolyzers and batteries, the electrochemical reactions occur only on triple phase boundaries (TPBs). The boundaries provide the conductors for electros and protons, the catalysts for electrochemical reactions and the effective pathways for transport of reactants and products. The interfaces have a critical impact on the overall performance and cost of the devices in which they are incorporated, and therefore could be a key feature to optimize in order to turn a prototype into a commercially viable product. For electrolysis of water, proton exchange membrane electrolyzer cells (PEMECs) have several advantages compared to other …

Turbine Engine Rotor Blade Damage Detection Through The Analysis Of Vibration Of Stationary Components, Jon Rylan Cox

Doctoral Dissertations

Rotor blade fault detection and health monitoring systems are crucial for gas turbine engine testing and evaluation. The most commonly used techniques involve monitoring blades directly using strain gages, or drilling optical access holes in the engine casing for non-contact probes to monitor blade deflection and vibration. In this work, less intrusive, indirect techniques for rotor blade fault detection are developed, based on the hypotheses that the vibratory response of stationary components excited by the rotor blade dynamic pressure pulse can be used to detect the presence, location, and severity of rotor blade damage and changes in rotor blade natural …

Numerical Investigations Of A High Frequency Pulsed Gaseous Fuel Jet Injection Into A Supersonic Crossflow, Nehemiah Joel Williams

Doctoral Dissertations

The investigation of fuel delivery mechanisms is a critical design point in the development of supersonic combustion ramjet (scramjet) technology. Primary challenges include proper penetration of the jet in the supersonic cross-flow while keeping total pressure losses and wall drag to a minimum. To reduce drag and heat loads especially at high burner entry Mach numbers it is desirable to use a minimally intrusive means of fuel delivery.

Pulsation of gaseous jets has been shown to increase penetration and mixing in subsonic flows. A limited number of experimental studies and even fewer numerical studies have suggested that when applied to …

Helical Models Of The Bidirectional Vortex In A Conical Geometry, Timothy Andrew Barber

Doctoral Dissertations

This dissertation represents the descriptive and analytical breakdown of two new fluid dynamics solutions for vortex motion. Both solutions model the bidirectional vortex within a conical geometry. The first explored solution satisfies a simple Beltramian characteristic, where the Lamb vector is identically zero. The second solution is of the generalized Beltramian type, which fulfills the condition that the curl of the Lamb vector is equal to zero. The two Beltramian solutions describe the axisymmetric, double helical motion often found in industrial cyclone separators. Other applications include cone-shaped, vortex-driven combustion chambers and the swirling flow through conical devices. Both solutions are …

Stability Of Particle-Mean Flow Interactions In Solid And Hybrid Rockets, Trevor Sterling Elliott

Doctoral Dissertations

Combustion instabilities associated with rocket motors as a result of unsteady components in the combustion chamber flow have been known to cause pressure oscillations. These pressure oscillations can result in changes to flight characteristics and vibrations translated to the rocket or payload. The unsteady components are comprised of two subcomponents, the vortico-acoustic fluctuations and the hydrodynamic fluctuations. As the vortico-acoustic fluctuations have been investigated in an exhaustive manner this work will focus on the hydrodynamic fluctuations. It has been known that the addition of particles increases specific impulse due to the resulting increase in combustion temperature and mass flow. They …

Fully Coupled Fluid And Electrodynamic Modeling Of Plasmas: A Two-Fluid Isomorphism And A Strong Conservative Flux-Coupled Finite Volume Framework, Richard Joel Thompson

Doctoral Dissertations

Ideal and resistive magnetohydrodynamics (MHD) have long served as the incumbent framework for modeling plasmas of engineering interest. However, new applications, such as hypersonic flight and propulsion, plasma propulsion, plasma instability in engineering devices, charge separation effects and electromagnetic wave interaction effects may demand a higher-fidelity physical model. For these cases, the two-fluid plasma model or its limiting case of a single bulk fluid, which results in a single-fluid coupled system of the Navier-Stokes and Maxwell equations, is necessary and permits a deeper physical study than the MHD framework. At present, major challenges are imposed on solving these physical models …

Plasmonics Resonance Enhanced Active Photothermal Effects In Aluminum Nanoenergetics For Propulsion Applications, Jacques Abboud

Doctoral Dissertations

In this dissertation, aluminum nanoparticles (Al NPs) are shown capable to on-demand enhance and control the local photothermal energy deposition, both spatially and temporally, via active photothermal effects initiated by the localized surface plasmon resonance (LSPR) phenomenon, and amplified by the Al exothermal oxidation reactions. Experiments in dry and wet environments along with computational modeling of the photothermal process are very desirable for gaining fundamental understanding, ignition optimization and parameter exploration.

Combined phenomena of motion and ignition of Al NPs are explored first in this study. Both resulting from exposing a pile of the nanoenergetics in hand to a single …

Multidimensional Compressible Framework For Modeling Biglobal Stability In Rocket Motors, Michel Henry Akiki

Doctoral Dissertations

Rocket motor stability analysis has historically been focused on two fundamental theories: the acoustic and the hydrodynamic. While the acoustic part examines the system at resonant states, the hydrodynamic component focuses on the fluid-wall interactions and the vortex shedding mechanisms which are responsible for exciting the system. Traditionally, the two concepts are studied independently and their results are then superposed for a more complete solution. In this study, we analyze the problem from a hydrodynamic standpoint and extend it to include compressibility. This is realized by reducing the linearized Navier-Stokes and energy equations to their biglobal form assuming a two-dimensional …

Parametric Instability Investigation And Stability Based Design For Transmission Systems Containing Face-Gear Drives, Meng Peng

Doctoral Dissertations

The objective of this dissertation is to provide a novel design methodology for face-gear transmissions based on system stability - a dynamics viewpoint. The structural dynamics models of transverse and torsional vibrations are developed for face-gear drives with spur pinions to investigate the parametric instability behavior in great depth. The unique face-gear meshing kinematics and the fluctuation of mesh stiffness due to a nonunity contact-ratio are considered in these models. Since the system is periodically timevarying, Floquet theory is utilized to solve the Mathieu-Hill system equations and determine the system stability numerically. To avoid complex numerical computations, Treglod’s approximation is …

On Compressible Gaseous Motions In Swirl Dominated Combustors, Brian A. Maicke

Doctoral Dissertations

In this dissertation, a number of models are derived to describe swirling flows. Both generalized compressible Bragg-Hawthorne and vorticity-stream function frameworks are determined and left in a generic form suitable for describing a number of different scenarios. These systems are solved for the bidirectional vortex flowfield by means of a Rayleigh-Janzen perturbation, which expands the governing equations in terms of the Mach number squared. The resulting equations are solved to provide a semi-analytical solution after the evaluation of a handful of numerical integrals. These solutions further the understanding of compressible flow in swirl-combustors, as previous compressible studies are primarily experimental …

The Biglobal Instability Of The Bidirectional Vortex, Joshua Will Batterson

Doctoral Dissertations

State of the art research in hydrodynamic stability analysis has moved from classic one-dimensional methods such as the local nonparallel approach and the parabolized stability equations to two-dimensional, biglobal, methods. The paradigm shift toward two dimensional techniques with the ability to accommodate fully three-dimensional base flows is a necessary step toward modeling complex, multidimensional flowfields in modern propulsive applications. Here, we employ a two-dimensional spatial waveform with sinusoidal temporal dependence to reduce the three-dimensional linearized Navier-Stokes equations to their biglobal form. Addressing hydrodynamic stability in this way circumvents the restrictive parallel-flow assumption and admits boundary conditions in the streamwise direction. …

Vortex Driven Acoustic Flow Instability, Lutz Blaette

Doctoral Dissertations

Most combustion machines feature internal flows with very high energy densities. If a small fraction of the total energy contained in the flow is diverted into oscillations, large mechanical or thermal loads on the structure can be the result, which are potentially devastating if not predicted correctly. This is particularly the case for lightweight high performing devices like rockets. The problem is commonly known as "Combustion Instability".
Several mechanisms have been identified in the past that link the flow field to the acoustics inside a combustion chamber and thereby drive or dampen oscillations, one of them being vortex shedding.

The …

Effect Of Unsteady Combustion On The Stability Of Rocket Engines, Tina Morina Rice

Doctoral Dissertations

Combustion instability is a problem that has plagued the development of rocket-propelled devices since their conception. It is characterized by the occurrence of high-frequency nonlinear gas oscillations inside the combustion chamber. This phenomenon degrades system performance and can result in damage to both structure and instrumentation.

The goal of this dissertation is to clarify the role of unsteady combustion in the combustor instability problem by providing the first quantified estimates of its effect upon the stability of liquid rocket engines. The combination of this research with a new system energy balance method, accounting for all dynamic interactions within a system, …

Theoretical Models For Wall Injected Duct Flows, Tony Saad

Doctoral Dissertations

This dissertation is concerned with the mathematical modeling of the flow in a porous cylinder with a focus on applications to solid rocket motors. After discussing the historical development and major contributions to the understanding of wall injected flows, we present an inviscid rotational model for solid and hybrid rockets with arbitrary headwall injection. Then, we address the problem of pressure integration and find that for a given divergence free velocity field, unless the vorticity transport equation is identically satisfied, one cannot find an analytic expression for the pressure by direct integration of the Navier-Stokes equations. This is followed by …

A Study Of Nonlinear Combustion Instability, Eric J. Jacob

Doctoral Dissertations

Combustion instability (CI) has been persistent in all forms of propulsion since their inception. CI is characterized by pressure oscillations within the propulsion system. If even a small fraction of the dense energy within the system is converted to acoustic oscillations the system vibrations can be devastating. The coupling of combustion and fluid dynamic phenomena in a nonlinear system poses CI as a significant engineering challenge.

Drawing from previous analysis, second order acoustic energy models are taken to third order. Second order analysis predicts exponential growth. The addition of the third order terms capture the nonlinear acoustic phenomena (such as …

Investigation Of Non-Conventional Bio-Derived Fuels For Hybrid Rocket Motors, Scott Grayson Putnam

Doctoral Dissertations

Non-conventional bio-derived fuels have been evaluated for use in hybrid rocket motors. Tests were conducted at combustion pressures in the range of 100 – 220 psig and thrust levels of 40 – 170 newtons. Beeswax was tested with oxygen as the oxidizer and showed a regression rate at least three times as high as traditional hybrid propellant combinations such as hydroxyl-terminated polybutadiene (HTPB) and liquid oxygen (LOX). This provides the promise of a high thrust hybrid rocket motor using a simple, single port geometry and overcomes the main weakness of traditional hybrid rocket motor propellants, which are low regression rates. …