Engineering Commons^™

Carbide-Derived Carbon By Electrochemical Etching Of Vanadium Carbides, Luis G.B. Camargo, Benjamin G. Palazzo, Greg Taylor, Zach A. Norris, Yash K. Patel, Jeffrey D. Hettinger, Lei Yu

Jeffrey Hettinger

Carbide-derived Carbon (CDC) has been demonstrated to be an excellent electrode material for electrochemical devices including supercapacitors due to its chemical and electrochemical stability, large specific surface area and controllable pore size and morphology. Currently, CDC is prepared from metal carbides by chlorination in a chlorine gas atmosphere at temperatures of 350°C or higher. In this paper, conversion using electrochemical methods is reported, which can be achieved by oxidizing vanadium carbides (VC or V2C) in aqueous solutions at room temperature and a mild electrode potential to prepare CDC thin film as electrode materials for “on-chip” supercapacitiors. It was found that …

Behavior Of Na+-Polystyrene Sulfonate At The Interface With Single-Walled Carbon Nanotubes (Swnts) And Its Implication To Swnt Suspension Stability, Tabbetha A. Dobbins, Richard Chevious, Yuri Lvov

Tabbetha A. Dobbins

The assembly of sodium polystyrene sulfonate (Na+-PSS) at the surface of single-walled carbon nanotubes (SWNTs) in pH 3 aqueous solution is described. Rather than forming linear or sheet-like chain morphologies over SWNT surfaces, Na+-PSS adopts a spherically collapsed conformation believed to be the result of cation (either Na+ or H+) condensation onto the ionized polymer chain. It is well reported that cations (and also anions) adsorb preferentially onto single-walled and multi-walled carbon nanotube surfaces leading to an increased ion concentration in the near surface regions relative to the bulk solution. This work provides experimental evidence for preferentially absorbed cation condensation …

Study Of Morphological Changes In Mgh2 Destabilized Libh4 Systems Using Computed X-Ray Microtomography, Tabbetha A. Dobbins, Shathabish Narasegowda, Leslie G. Butler

Tabbetha A. Dobbins

The objective of this study was to apply three-dimensional x-ray microtomographic imaging to understanding morphologies in the diphasic destabilized hydride system: MgH2 and LiBH4. Each of the single phase hydrides as well as two-phase mixtures at LiBH4:MgH2 ratios of 1:3, 1:1, and 2:1 were prepared by high energy ball milling for 5 minutes (with and without 4 mol % TiCl3 catalyst additions). Samples were imaged using computed microtomography in order to (i) establish measurement conditions leading to maximum absorption contrast between the two phases and (ii) determine interfacial volume. The optimal energy for measurement was determined to be 15 keV …

Evolution And Rationale For United States Department Of Defense Electromagnetic Pulse Protection Standard, George H. Baker Iii

George H Baker

The United States (US) Department of Defense (DoD) Electromagnetic Pulse (EMP) protection standard offers a solid basis for protecting commercial communication, data, and control facilities. Because of the standard’s shielded barrier and test requirements, it is not surprising that there is a strong temptation within industry and government to dismiss the MIL-STD 188-125 approach in favor of less rigorous protection methods. It is important to understand that US DoD EMP protection standard for fixed facilities, MIL-STD-188-125, reflects an evolution by trial and error that spanned a period of decades beginning with the acquisition of the Minuteman Missile System in the …

Proposal For A Dod Combined Battlefield Electromagnetic Environmental Effects (E3) Initiative, George H. Baker Iii

George H Baker

The presentation emphasizes the growing importance of electromagnetic survivability and compatibility. Operation Desert Storm demonstrated the clear military advantage provided by sophisticated electronic weapon and communication systems. In addition, the offensive tactic of taking out the enemy's eyes and ears during the air war paid off, giving our military decisive air superiority. The lessons for the future are clear. High-tech electronics now so dominates the battlefield that the outcome of future conflicts could well be decided by electronics attrition rather than human casualties. Our Desert Storm experience thus accentuates the importance of guaranteeing that our electronic systems will not be …

Testimony Of Dr. George H. Baker, Senior Advisor To The Congressional Emp Commission, George H. Baker Iii

George H Baker

This is the script of testimony before the Federal Energy Regulatory Commission. It offers a vision for a future in which our electric power systems will be able to operate through or quickly recover from catastrophic failure due to electromagnetic pulse (EMP), cyber, and physical attacks. The scope of the term ‘EMP’ used in this testimony includes both naturally occurring solar storms and the more energetic man-made EMP hazards. The vision has been discussed with members of the electric power industry, and prominent EMP/cyber/physical protection advocates who find it to be supportable and actionable. The nature of EMP, cyber, and …

Harnessing Wastewater For Renewable Energy (2013-2), Aaron Adalja, Chalida U-Tapao

Aaron Adalja

This case study explores the options for using wastewater to produce renewable energy in the context of a public wastewater treatment plant. It provides an opportunity for students to synthesize knowledge from resource economics, engineering, environmental science, agriculture, and public policy to develop a transdisciplinary approach to a socio-environmental issue. The case is designed for upper division undergraduate courses in resource economics or environmental engineering, but several modifications are provided graduate course applications. Students assume the role of a newly hired analyst at a consulting firm in Washington, DC, that specializes in renewable energy solutions. They are charged with proposing …

Software Metrics And Dashboard, Shilpika Shilpika, George K. Thiruvathukal, Saulo Aguiar, Konstantin Läufer, Nicholas J. Hayward

Nicholas Hayward

Software metrics are a critical tool which provide continuous insight to products and processes and help build reliable software in mission critical environments. Using software metrics we can perform calculations that help assess the effectiveness of the underlying software or process. The two types of metrics relevant to our work is complexity metrics and in-process metrics. Complexity metrics tend to focus on intrinsic code properties like code complexity. In-process metrics focus on a higher-level view of software quality, measuring information that can provide insight into the underlying software development process.

Our aim is to develop and evaluate a metrics dashboard …

Prediction Of Solid Oxide Fuel Cell Performance Using Artificial Neural Network, M. A. Rafe Biswas, Kamwana N. Mwara

M. A. Rafe Biswas

Metrics, Software Engineering, Small Systems – The Future Of Systems Development, William L. Honig

William L Honig

In this talk I will introduce the importance of metrics, or measures, and the role they play in the development of high quality computer systems. I will review some key mega trends in computer science over the last three decades and then explain why I believe the trend to small networked systems, along with metrics and software engineering will define the future of high technology computer based systems. I first learned about metrics at the Bell System where everything was measured. Metrics can be understood easily if you think of them as measures, for example of calories or salt in …

Introduction To Atomic Requirements, William L. Honig

William L Honig

An introduction to requirements and the importance of making single atomic requirements statements. Atomic requirements have advantages and improve the requirements process, support requirement verification and validation, enable traceability, support testability of systems, and provide management advantages. Why has there been so little emphasis on atomic requirements?

Requirements Quick Notes, William L. Honig, Shingo Takada

William L Honig

A short introduction to requirements and their role in system development. Includes industry definition of requirements, overview of basic requirements process including numbering of requirements, ties to testing, and traceability. An introduction to requirements quality attributes (correct, unambiguous, etc.) Includes references to requirements process, numbering, and quality papers.

An Example Of Atomic Requirements - Login Screen, William L. Honig

William L Honig

A simple example of what an atomic or individual or singular requirement statement should be. Using the example of the familiar login screen, shows the evolution from a low quality initial attempt at requirements to a complete atomic requirement statement. Introduces the idea of a system glossary to support the atomic requirement.

Requirements Metrics - Definitions Of A Working List Of Possible Metrics For Requirements Quality, William L. Honig

William L Honig

A work in progress to define a metrics set for requirements. Metrics are defined that apply to either the entire requirements set (requirements document as a whole) or individual atomic (or singular, individual) requirements statements. Requirements are identified with standard names and a identification scheme and include both subjective and objective measures. An example metric for the full set of requirements: Rd2 - Requirements Consistency, Is the set of atomic requirements internally consistent, with no contradictions, no duplication between individual requirements? An example of a metric for a single requirement: Ra4 - Requirement Verifiability, How adequately can this requirement be …

Atomic Requirements Quick Notes, William L. Honig, Shingo Takada

William L Honig

Working paper on atomic requirements for systems development and the importance of singular, cohesive, individual requirements statements. Covers possible definitions of atomic requirements, and their characteristics. Atomic requirements improve many parts of the development process from requirements to testing and contracting.

300-X-250-7.Jpg, Susunqq Online

susunqq

Software Metrics And Dashboard, Shilpika Shilpika, George K. Thiruvathukal, Saulo Aguiar, Konstantin Läufer, Nicholas J. Hayward

Konstantin Läufer

Software metrics are a critical tool which provide continuous insight to products and processes and help build reliable software in mission critical environments. Using software metrics we can perform calculations that help assess the effectiveness of the underlying software or process. The two types of metrics relevant to our work is complexity metrics and in-process metrics. Complexity metrics tend to focus on intrinsic code properties like code complexity. In-process metrics focus on a higher-level view of software quality, measuring information that can provide insight into the underlying software development process.

Our aim is to develop and evaluate a metrics dashboard …

Reference Data Set Of Volcanic Ash Physicochemical And Optical Properties, A. Vogel, S. Diplas, A. J. Durant, A. S. Azar, M. F. Sunding, William I. Rose, A. Sytchkova, C. Bonadonna, K. Krüger, A. Stohl

William I. Rose

Uncertainty in the physicochemical and optical properties of volcanic ash particles creates errors in the detection and modeling of volcanic ash clouds and in quantification of their potential impacts. In this study, we provide a data set that describes the physicochemical and optical properties of a representative selection of volcanic ash samples from nine different volcanic eruptions covering a wide range of silica contents (50–80 wt % SiO2). We measured and calculated parameters describing the physical (size distribution, complex shape, and dense-rock equivalent mass density), chemical (bulk and surface composition), and optical (complex refractive index from ultraviolet to near-infrared wavelengths) …

Creating An Experimental Learning And Research Driven Spacesuit Lab For Erau, Ryan L. Kobrick, Erik Seedhouse

Ryan L. Kobrick

This paper evaluates key functional data parameters that must be considered for suborbital spaceflight participants wearing pressurized suits for intravehicular activity (IVA). Data parameters of an analog spacesuit worn in an analog flight environment were obtained from 40 civilian participants using the Suborbital Space Flight Simulator (SSFS) at Embry-Riddle Aeronautical University (ERAU) while donning Final Frontier Design’s (FFD) fully pressurized third-generation spacesuit as part of their training for Project PoSSUM (the Polar Suborbital Science in the Upper Mesosphere Project). The physiological data collected included: blood pressure, electrocardiograms, heart rate, grip strength, and skin temperature. These parameters were measured using a …

Cobalt-Doped Ceria/Reduced Graphene Oxide Nanocomposite As An Efficient Oxygen Reduction Reaction Catalyst And Supercapacitor Material, Shaikh Parwaiz, Kousik Bhunia, Ashok Kumar Das, Mohammad Mansoob Khan Dr, Debabrata Pradhan

Dr. Mohammad Mansoob Khan

Grnsight: A Web Application And Service For Visualizing Models Of Small- To Medium-Scale Gene Regulatory Networks, Kam D. Dahlquist, John David N. Dionisio, Ben G. Fitzpatrick, Nicole A. Anguiano, Anindita Varshneya, Britain J. Southwick, Mihir Samdarshi

Ben G. Fitzpatrick

GRNsight is a web application and service for visualizing models of gene regulatory networks (GRNs). A gene regulatory network (GRN) consists of genes, transcription factors, and the regulatory connections between them which govern the level of expression of mRNA and protein from genes. The original motivation came from our efforts to perform parameter estimation and forward simulation of the dynamics of a differential equations model of a small GRN with 21 nodes and 31 edges. We wanted a quick and easy way to visualize the weight parameters from the model which represent the direction and magnitude of the influence of …

Effects Of Anthropomorphism On Trust In Human-Robot Interaction, Keith R. Macarthur, William T. Shugars, Tracy L. Sanders, Peter A. Hancock

Keith Reid MacArthur

Modelling And Hazard Analysis For Contaminated Sediments Using Stamp Model, Karim Hardy, Franck Guarnieri

Karim Hardy

Processes for remediation (removal of pollution or contaminants) of contaminated sediments have been very efficient. These technologies, which are particularly complex, call for a comprehensive approach to risk analysis which characterises all threats (to humans, equipment, local residents, the environment, etc.) . The STAMP accident model (Systems-Theoretic Accident Model and Processes) is an example of such a comprehensive approach, and it has been chosen to characterise the risks associated with Novosol (registered trademark), an innovative remediation process.

Modelling And Hazard Analysis For Contaminated Sediments Using Stamp Model And Stpa Tool, Karim Hardy, Franck Guarnieri

Karim Hardy

The goal of this article is dual: first, introducing a new model of accident named STAMP (systems-theoretic accident modeling and processes); then applying the model to an innovative process for the treatment of contaminated substances and the re-use of treated substances. This article is a demonstration for a need of a new tool to take into account hazards and safety within socio-technical systems.

Jessicahlawrencemastersportfolio.Pdf, Jessicah Lawrence

Jessicah Lawrence

No abstract provided.

Comparing Multiple Turbulence Restoration Algorithms Performance On Noisy Anisoplanatic Imagery, Michael Armand Rucci, Russell C. Hardie, Alexander J. Dapore

Russell C. Hardie

In this paper, we compare the performance of multiple turbulence mitigation algorithms to restore imagery degraded by atmospheric turbulence and camera noise. In order to quantify and compare algorithm performance, imaging scenes were simulated by applying noise and varying levels of turbulence. For the simulation, a Monte-Carlo wave optics approach is used to simulate the spatially and temporally varying turbulence in an image sequence. A Poisson-Gaussian noise mixture model is then used to add noise to the observed turbulence image set. These degraded image sets are processed with three separate restoration algorithms: Lucky Look imaging, bispectral speckle imaging, and a …

Analysis Of Various Classification Techniques For Computer Aided Detection System Of Pulmonary Nodules In Ct, Barath Narayanan Narayanan, Russell C. Hardie, Temesguen Messay

Russell C. Hardie

Lung cancer is the leading cause of cancer death in the United States. It usually exhibits its presence with the formation of pulmonary nodules. Nodules are round or oval-shaped growth present in the lung. Computed Tomography (CT) scans are used by radiologists to detect such nodules. Computer Aided Detection (CAD) of such nodules would aid in providing a second opinion to the radiologists and would be of valuable help in lung cancer screening. In this research, we study various feature selection methods for the CAD system framework proposed in FlyerScan. Algorithmic steps of FlyerScan include (i) local contrast enhancement (ii) …

On The Simulation And Mitigation Of Anisoplanatic Optical Turbulence For Long Range Imaging, Russell C. Hardie, Daniel A. Lemaster

Russell C. Hardie

We describe a numerical wave propagation method for simulating long range imaging of an extended scene under anisoplanatic conditions. Our approach computes an array of point spread functions (PSFs) for a 2D grid on the object plane. The PSFs are then used in a spatially varying weighted sum operation, with an ideal image, to produce a simulated image with realistic optical turbulence degradation. To validate the simulation we compare simulated outputs with the theoretical anisoplanatic tilt correlation and differential tilt variance. This is in addition to comparing the long- and short-exposure PSFs, and isoplanatic angle. Our validation analysis shows an …

A Brief Review On Leading Big Data Models, Sugam Sharma, Udoyara S. Tim, Johnny S. Wong, Shashi Gadia, Subhash Sharma

Sugam Sharma

Today, science is passing through an era of transformation, where the inundation of data, dubbed data deluge is influencing the decision making process. The science is driven by the data and is being termed as data science. In this internet age, the volume of the data has grown up to petabytes, and this large, complex, structured or unstructured, and heterogeneous data in the form of “Big Data” has gained significant attention. The rapid pace of data growth through various disparate sources, especially social media such as Facebook, has seriously challenged the data analytic capabilities of traditional relational databases. The velocity …

Contextual Motivation In Physical Activity By Means Of Association Rule Mining, Sugam Sharma, Udoyara Sunday Tim, Marinelle Payton, Hari Cohly, Shashi Gadia, Johnny Wong, Sudharshanam Karakala

Sugam Sharma

The primary thrust of this work is to demonstrate the applicability of association rule mining in public health domain, focusing on physical activity and exercising. In this paper, the concept of association rule mining is shown assisting to promote the physical exercise as regular human activity. Specifically, similar to the prototypical example of association rule mining, market basket analysis, our proposed novel approach considers two events – exercise (sporadic) and sleep (regular) as the two items of the frequent set; and associating the former, exercise event, with latter, the daily occurring activity sleep at night, helps strengthening the frequency of …