Engineering Commons^™

Analysis Of Ladar Range Resolution Enhancement By Sinusoidal Phase Modulation, Leonard T. Masters, Martin B. Mark, Bradley D. Duncan

Electro-Optics and Photonics Faculty Publications

The ability of a ladar system to resolve two or more separate returns from a combined echo is related to the effective correlation bandwidth of the pulse emitted by the ladar system. Phase modulation of an outgoing pulse introduces additional frequency components, which increases the effective correlation bandwidth of the pulse and thus improves the range resolution of the system. In this paper, we discuss the general theoretical basis for achieving improved range resolution using a modulated waveform and a matched filter receiver. We then demonstrate these concepts by considering the particular case of improved range resolution for a sinusoidally …

Heterodyne Ladar System Efficiency Enhancement Using Single-Mode Optical Fiber Mixers, Donald K. Jacob, Martin B. Mark, Bradley D. Duncan

Electro-Optics and Photonics Faculty Publications

A theoretical performance analysis of a heterodyne ladar system incorporating a single-mode fiber receiver has been performed. For our purposes, the performance parameters of interest are the coupling and mixing efficiency of the ladar receiver, as they relate to the overall system carrier-to-noise ratio. For a receiver incorporating a single-mode fiber mixer, the received and local-oscillator fields are matched both spatially and temporally at the detector, yielding 100% mixing efficiency. We have therefore focused our efforts on determining an expression for the efficiency with which a diffuse return from a purely speckle target can be coupled into the receiving leg …

Image Restoration Of Dispersion-Degraded Images From A Liquid-Crystal Beam Steerer, Ronald J. Broessel, Vince Dominic, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

Liquid-crystal arrays represents one of the first practical technologies capable of steering light by electronic control only. We use such a device to steer the field of view of a broadband imaging sensor. Unfortunately, dispersion degrades the image quality by smearing out details in the image and by introducing multiple diffraction orders (echoes) at the detector plane. We present a method to compensate for these unwanted effects and thus restore the broadband images obtained with the beam steerer. We use the beam-propagation method to find the wavelength-dependent impulse response, from which we determine the appropriate Wiener filter. When training data …

Aliasing Reduction In Staring Infrared Imagers Utilizing Subpixel Techniques, Joseph C. Gillette, Thomas M. Stadtmiller, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

We introduce and analyze techniques for the reduction of aliased signal energy in a staring infrared imaging system. A standard staring system uses a fixed two-dimensional detector array that corresponds to a fixed spatial sampling frequency determined by the detector pitch or spacing. Aliasing will occur when sampling a scene containing spatial frequencies exceeding half the sampling frequency. This aliasing can significantly degrade the image quality. The aliasing reduction schemes presented here, referred to as microscanning, exploit subpixel shifts between time frames of an image sequence. These multiple images are used to reconstruct a single frame with reduced aliasing. If …

Broadband Dynamic, Holographically Self-Recorded, And Static Hexagonal Scattering Patterns In Photorefractive Knbo3:Fe, Nickolai Kukhtarev, Tatiana V. Kukhtareva, John Caulfield, Partha P. Banerjee, Hsueh-Ling Yu, Lambertus Hesselink

Electrical and Computer Engineering Faculty Publications

We have observed and explained three types of hexagon pattern formation in photo refractive crystal KNb03:Fe. These are:

• Dynamic (laser induced)
• Semipermanent (holographically stored)
• Permanent (induced by a static domain grid) over a wide wavelength range

Guest Editorial: Special Section On Photorefractive Nonlinear Optics, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

Hand in hand with experimental work in photorefractives, there is a lot of activity in modeling photorefractive materials and experimental observations in the open literature. This special section contains a paper by Banerjee and Jarem, who use a rigorous coupled wave theory to analyze two- and multiple-wave mixing photorefractive barium titanate, modeled through the Kukhtarev equations.

Transient Wave Mixing And Recording Kinetics In Photorefractive Barium Titanate: A Nonlinear Coupled Mode Approach, Partha P. Banerjee, John M. Jarem

Electrical and Computer Engineering Faculty Publications

By using rigorous coupled-wave diffraction theory along with a time-dependent nonlinear formulation, we analyze two- and multiplewave coupling and the grating kinetics in BaTi03 with different boundary interfaces. Efffects of electrostatic and optical anisotropy have been included in the analysis. Significant mode conversion to higher orders is observed only when the boundary interfaces are highly mismatched.

Review: 'Integrated Optics: Design And Modeling,' By Reinhard Marz, Bradley D. Duncan

Electro-Optics and Photonics Faculty Publications

My overall impression is that Integrated Optics: Design and Modeling will make a fine addition to almost anyone's collection of books on integrated optics. It will, however, serve its readers better as a reference book than as a text from which to first learn the basic concepts of integrated optics. I say this because the book is written at a fairly sophisticated technical level, though the author often moves rather quickly to the "bottom line" without providing material much beyond what is first necessary to introduce a problem or concept, and then a statement of the results and/or implications. It …