Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 30 of 46

Full-Text Articles in Engineering

Dropwise Condensation Dynamics In Humid Air, Julian Eduardo Castillo Chaco Oct 2014

Dropwise Condensation Dynamics In Humid Air, Julian Eduardo Castillo Chaco

Open Access Theses

Dropwise condensation of atmospheric water vapor is important in multiple practical engineering applications. The roles of environmental factors and surface morphology/chemistry on the condensation dynamics need to be better understood to enable efficient water-harvesting, dehumidication, and other psychrometric processes. Systems and surfaces that promote faster condensation rates and self-shedding of condensate droplets could lead to improved mass transfer rates and higher water yields in harvesting applications. The thesis presents the design and construction of an experimental facility that allows visualization of the condensation process as a function of relative humidity. Dropwise condensation experiments are performed on a vertically oriented, hydrophobic …


Rapid Indirect Trajectory Optimization On Highly Parallel Computing Architectures, Thomas Antony Oct 2014

Rapid Indirect Trajectory Optimization On Highly Parallel Computing Architectures, Thomas Antony

Open Access Theses

Trajectory optimization is a field which can benefit greatly from the advantages offered by parallel computing. The current state-of-the-art in trajectory optimization focuses on the use of direct optimization methods, such as the pseudo-spectral method. These methods are favored due to their ease of implementation and large convergence regions while indirect methods have largely been ignored in the literature in the past decade except for specific applications in astrodynamics. It has been shown that the shortcomings conventionally associated with indirect methods can be overcome by the use of a continuation method in which complex trajectory solutions are obtained by solving …


Impact Of License Selection On Open Source Software Quality, Benjamin J. Cotton Oct 2014

Impact Of License Selection On Open Source Software Quality, Benjamin J. Cotton

Open Access Theses

Open source software plays an important part in the modern world, powering businesses large and small. However, little work has been done to evaluate the quality of open source software. Two different license paradigms exist within the open source world, and this study examines the difference in software quality between them. In this thesis, the author uses technical debt as a measure of software quality. Eighty open source projects (40 from each paradigm) were downloaded from the popular open source hosting website SourceForge. Using complexity, code duplication, comments, and unit test coverage as inputs to the SonarQube technical debt model, …


Wi-Fi Real Time Location Systems, Benjamin A. Doll Oct 2014

Wi-Fi Real Time Location Systems, Benjamin A. Doll

Open Access Theses

This thesis objective was to determine the viability of utilizing an untrained Wi-Fi real time location system as a GPS alternative for indoor environments. Background research showed that GPS is rarely able to penetrate buildings to provide reliable location data. The benefit of having location information in a facility and how they might be used for disaster or emergency relief personnel and their resources motivated this research. A building was selected with a well-deployed Wi-Fi infrastructure and its untrained location feature was used to determine the distance between the specified test points and the system identified location. It was found …


Digital Image Correlation Of Heterogeneous Deformations In Polycrystalline Material With Electron Backscatter Diffraction, Javier Esquivel Oct 2014

Digital Image Correlation Of Heterogeneous Deformations In Polycrystalline Material With Electron Backscatter Diffraction, Javier Esquivel

Open Access Theses

This work establishes the ability to conduct digital image correlation (DIC) investigations at varying length scales. DIC allows for a computational method of strain field measurements using multiple images to track random speckle patterns on material surfaces. The use of a powder silicon oxide speckle allows for high optical magnification correlation using conventional load frames. Self-assembling gold nanoparticles provide sub-micron resolution speckle patterns to study microstructure influences on deformation using scanning electron microscopy. The complex microstructure in aerospace grade aluminum and nickel-based superalloys, give rise to varied deformation fields, which can be studied using electron backscatter diffraction. Specimen preparation techniques, …


Application Of Bayesian Networks In Consumer Service Industry, Yuan Gao Oct 2014

Application Of Bayesian Networks In Consumer Service Industry, Yuan Gao

Open Access Theses

Gao, Yuan. M.S.I.E., Purdue University. December 2014. Application of Bayesian Networks in Consumer Service Industry. Major professor: Vincent G. Duffy The purpose of the present study is to explore the application of Bayesian networks in the consumer service industry to model causal relationships within complex risk factor structures using aggregate data. An analysis of the Hawaii tourism market was conducted to find out how visitor characteristics affect their behavior and experience as consumers during the trips, and influence the tourism market outcomes represented by measurable factors. Two hypotheses were proposed regarding the use of aggregate data and the influence of …


Dynamic Wireless Power Transfer System For The Unmanned Aerial Vehicles, Tae Sup Lee Oct 2014

Dynamic Wireless Power Transfer System For The Unmanned Aerial Vehicles, Tae Sup Lee

Open Access Theses

UAVs have limitless applications to help our daily lives for the autonomous operations. UAVs have a limited power capacity due to weight constraints and are therefore not able to travel long distances. Ground stations for recharging UAVs throughout different points can increase the flight time of the UAVs with the current UAV battery capacity. This study investigates how the wireless charging system for the ground station can be made more robust when there are misalignments. The wireless charging system is monitored by an Arduino, micro controller, to assess the current condition of charging. The Arduino is able to change the …


High-Purity Gallium Analysis By Inductively Coupled Plasma Mass Spectrometry, Kyungjean Min Oct 2014

High-Purity Gallium Analysis By Inductively Coupled Plasma Mass Spectrometry, Kyungjean Min

Open Access Theses

The mobility of Two-dimensional Electron Gas in AlGaAs/GaAs heterostructures that are grown in the Molecular Beam Epitaxy (MBE) can be increased by purification of the gallium used to grow the films. To attain 200 million cm2/Vs mobility, the impurity concentration of gallium should be reduced to below 1 ppb. The commercial 7N (99.99999%) gallium with 100 ppb total impurity is currently used in the MBE at Purdue University and is being purified by zone refining. To evaluate the commercial 7N gallium and establish the methodology for the impurity measurement after zone refining, germanium, iron, and zinc in 6N and 7N …


Watershed Delineation In The Field: A New Approach For Mobile Applications Using Lidar Elevation Data, Samuel Adam Noel Oct 2014

Watershed Delineation In The Field: A New Approach For Mobile Applications Using Lidar Elevation Data, Samuel Adam Noel

Open Access Theses

With the advancement of mobile devices, opportunities to take watershed management tasks out of the office and into the field can be realized. In turn, field workers can utilize these technologies to expedite the decision-making process so that they may focus on meeting with clients and addressing agricultural watershed management issues. High-resolution (∼1.5 m postspacing) elevation data gathered by light detection and ranging (LiDAR) provides the topographic detail necessary to model hydrology at the field-scale (∼1 km2).

Non-artifactual surface depressions lead to erroneous surface flow patterns when using existing algorithms. So a sequential depression-filling algorithm (SDFA) has been developed to …


Evaluating Optimum Levels Of Detail For 3d Interactive Aviation Maintenance Instructions, Nicholas Rohe Oct 2014

Evaluating Optimum Levels Of Detail For 3d Interactive Aviation Maintenance Instructions, Nicholas Rohe

Open Access Theses

With the aviation industry shifting from paper based maintenance instructions to digital maintenance instructions, there needs to be a standard for what goes into creating the digital instructions. This study was done to determine what the optimum level of detail for 3D interactive aviation maintenance instructions. The definition of optimum for this study was: lowest amount of geometrical data with lowest rendering needed for comprehension and ease of use.


Waste Heat Recovery Options In A Large Gas-Turbine Combined Power Plant, Ularee Upathumchard Oct 2014

Waste Heat Recovery Options In A Large Gas-Turbine Combined Power Plant, Ularee Upathumchard

Open Access Theses

This study focuses on power plant heat loss and how to utilize the waste heat in energy recovery systems in order to increase the overall power plant efficiency. The case study of this research is a 700-MW natural gas combined cycle power plant, located in a suburban area of Thailand. An analysis of the heat loss of the combustion process, power generation process, lubrication system, and cooling system has been conducted to evaluate waste heat recovery options. The design of the waste heat recovery options depends to the amount of heat loss from each system and its temperature. Feasible waste …


High Voltage Rear Electric Drivetrain Design For A Parallelthrough-The-Road Plug-In Hybrid Electric Vehicle, Adam Garrett Fogarty Oct 2014

High Voltage Rear Electric Drivetrain Design For A Parallelthrough-The-Road Plug-In Hybrid Electric Vehicle, Adam Garrett Fogarty

Open Access Theses

Purdue University was selected as one of 15 universities to participate in a three year Advanced Vehicle Technology Competition (AVTC) called EcoCar2: Plugging Into the Future. The vehicle built by the Purdue team was a Parallel-Through-The-Road Plug-in Hybrid Electric Vehicle (PTTR PHEV). The vehicle utilized a B20 diesel powertrain to power the front wheels, as well as a custom electric drivetrain to power the rear wheels. Using this vehicle during the final year of the competition, the team was successful in placing 4th overall as well as 2nd in the category of Well-To-Wheel (WTW) Greenhouse Gas Emissions. A stock 2013 …


Identifying Conditions To Optimize Lactic Acid Production From Food Waste, Raymond M. Redcorn Oct 2014

Identifying Conditions To Optimize Lactic Acid Production From Food Waste, Raymond M. Redcorn

Open Access Theses

There is an increased demand for lactic acid for the production of biopolymers and to aid nutrient removal in wastewater treatment. Food waste offers a source of soluble sugars to produce lactic acid, which does not increase land demand, but digestion conditions have yet to be optimized when co-digested with primary sludge. Food waste was collected from cafeteria waste bins, homogenized and seeded with primary sludge. A Box Behnken Response surface design was used to optimize lactic acid production based on pH, temperature, loading rate, and retention time. Subsequent experiments verified and refined those conditions to optimize for both yield …


Indoor Acoustic Mapping And Geolocation, Thomas Shyy Oct 2014

Indoor Acoustic Mapping And Geolocation, Thomas Shyy

Open Access Theses

The Global Positioning System (GPS) is widely used in navigations of flights, vehicles and travelers nowadays. However, the signals are not always available and there are some cases where the receptions of the GPS signal can be lost because of the presence of urban canyons, buildings, tunnels and forests. Another down side for the GPS is that indoor positioning can be really difficult because of the greater signal interference from the indoor.

On the other hand, the concept of echolocation has also been used for positioning purposes. Echolocation offers a promising approach to improve the quality of life of people …


Evaluation Of Collapse Indicators For Seismically Vulnerable Reinforced Concrete Buildings, Nicholas R. Skok Oct 2014

Evaluation Of Collapse Indicators For Seismically Vulnerable Reinforced Concrete Buildings, Nicholas R. Skok

Open Access Theses

Older reinforced concrete buildings can be prone to column shear and compression failures during earthquakes because of inadequate transverse reinforcement. Cities in seismic areas still have large inventories of older and potentially deficient buildings. To analyze every building and estimate its vulnerability in detail is costly. A simple method to rank quickly older buildings according to their seismic vulnerability is needed to help engineers prioritize the use of resources for rehabilitating the most vulnerable buildings.

Four indicators of building damage or collapse were evaluated using numerical analysis and prior data from building surveys: column index (Hassan & Sozen, 1997), R …


Impact Of Nanostructure On Polymer-Based Nonvolatile Memory Devices, Seung Hyun Sung Oct 2014

Impact Of Nanostructure On Polymer-Based Nonvolatile Memory Devices, Seung Hyun Sung

Open Access Theses

Memory functionality is essential for many high-end electronic applications (e.g. , smart phones, personal computers). Particularly, organic nonvolatile memory devices based on polymer ferroelectric materials are a promising approach toward the development of low-cost memory due to the ease of processing and flexibility associated with the device. Here, we will focus on a memory device with a two-component active layer and a diode structure. This ferroelectric diode (FeD) has a nanostructured active layer, composed of ferroelectric and semiconducting polymers, and it can provide easy access to high-performance polymer-based memory devices. In order to create these nanostructured active layers, we …


Paxos Based Directory Updates For Geo-Replicated Cloud Storage, Srivathsava Rangarajan Jul 2014

Paxos Based Directory Updates For Geo-Replicated Cloud Storage, Srivathsava Rangarajan

Open Access Theses

Modern cloud data stores (e.g., Spanner, Cassandra) replicate data across geographically distributed data centers for availability, redundancy and optimized latencies.^ An important class of cloud data stores involves the use of directories to track the location of individual data objects. Directory-based datastores allow flexible data placement, and the ability to adapt placement in response to changing workload dynamics. However, a key challenge is maintaining and updating the directory state when replica placement changes.^ In this thesis, we present the design and implementation of a system to address the problem of correctly updating these directories. Our system is built around JPaxos, …


A Study To Estimate And Compare The Total Particulate Matter Emission Indices (Ein) Between Traditional Jet Fuel And Two Blends Of Jet A/Camelina Biofuel Used In A High By-Pass Turbofan Engine: A Case Study Of Honeywell Tfe-109 Engine, Jacob Joshua Howard Shila Jul 2014

A Study To Estimate And Compare The Total Particulate Matter Emission Indices (Ein) Between Traditional Jet Fuel And Two Blends Of Jet A/Camelina Biofuel Used In A High By-Pass Turbofan Engine: A Case Study Of Honeywell Tfe-109 Engine, Jacob Joshua Howard Shila

Open Access Theses

The aviation industry is expected to grow at an annual rate of 5% until the year 2031 according to Boeing Outlook Report of 2012. Although the aerospace manufacturers have introduced new aircraft and engines technologies to reduce the emissions generated by aircraft engines, about 15% of all aircraft in 2032 will be using the older technologies. Therefore, agencies such as the National Aeronautics and Astronautics Administration (NASA), Federal Aviation Administration (FAA), the Environmental Protection Agency (EPA) among others together with some academic institutions have been working to characterize both physical and chemical characteristics of the aircraft particulate matter emissions to …


A Fesability Analysis Of A Novel Constructed Wetland Design Tool For Arusha, Tanzania, Michael R. Sheehan Jul 2014

A Fesability Analysis Of A Novel Constructed Wetland Design Tool For Arusha, Tanzania, Michael R. Sheehan

Open Access Theses

While water is a resource necessary for all life, in Tanzania alone over 20 million people who live in rural areas have no access to improved water sources. Water stress is a major concern in rural Tanzania, where annual potential evaporation can outpace precipitation by hundreds of mm per year. There is a significant need for improved access to water sources for Tanzanians living in rural regions of Arusha. To improve access to water, both water quantity and quality need to be addressed in a treatment system. Various water collection and treatment systems were compared and contrasted through the lens …


The Prediction Of Airborne And Structure-Borne Noise Potential For A Tire, Nicholas Sakamoto Jul 2014

The Prediction Of Airborne And Structure-Borne Noise Potential For A Tire, Nicholas Sakamoto

Open Access Theses

Tire/pavement interaction noise is a major component of both exterior pass-by noise and vehicle interior noise. The current testing methods for ranking tires from loud to quiet require expensive equipment, multiple tires, and/or long experimental set-up and run times. If a laboratory based off-vehicle test could be used to identify the airborne and structure-borne potential of a tire from its dynamic characteristics, a relative ranking of a large group of tires could be performed at relatively modest expense. This would provide a smaller sample set of tires for follow-up testing and thus save expense for automobile OEMs. The focus of …


Tracking Dynamic Construction Objects ---A Key Node Modeling Approach Using Color-Depth Cameras, Chenxi Yuan Jul 2014

Tracking Dynamic Construction Objects ---A Key Node Modeling Approach Using Color-Depth Cameras, Chenxi Yuan

Open Access Theses

A construction site presents a dynamic scenario. Locations of multiple objects are continuously changing and a lot of objects enter and exit the site in high frequencies. Meanwhile a construction activity consists of a large amount of stochastic operations, many uncertainties occur when making decisions. Believing that detecting, locating and tracking dynamic construction objects in real time improve construction productivity and enhance construction safety, a large number of studies have applied a variety of sensing technologies to construction sites. Hybrid image-point cloud sensing technologies, such as color-depth cameras, have a great potential in achieving real time object recognition and tracking …


Correlating Molecular Architecture Of A Radical Polymer Based Copolymer With Its Electrical Transport Properties, Holly Chan Jul 2014

Correlating Molecular Architecture Of A Radical Polymer Based Copolymer With Its Electrical Transport Properties, Holly Chan

Open Access Theses

The design and synthesis of electrically-conductive macromolecules can lead to significant improvements in the performance of polymer-based energy conversion devices (e.g., thermoelectric devices). For these organic electronic devices, conjugated polymers have dominated the area of conductive polymers; however, these materials are usually synthesized using conditions that lead to poorly-defined polymers. Furthermore, in these increasingly-standard polymers, the charge transport ability of the polymer thin films is largely affected by the degree of crystallinity, which is a difficult property to control in a reproducible fashion. Therefore, we seek to explore a new class of amorphous, non-conjugated polymers containing a stable radical …


Systematic Analysis Of Drainage Events In Free Draining And Managed Subsurface Drainage Systems, Guy Bou Lahdou Jul 2014

Systematic Analysis Of Drainage Events In Free Draining And Managed Subsurface Drainage Systems, Guy Bou Lahdou

Open Access Theses

Understanding the hydrologic controls that regulate outflow from free and managed subsurface drainage systems during drainage events can offer improved insight on the overall functioning and effectiveness of the systems so that they can be better managed or retrofitted to increase their environmental benefits. This study used drainage, precipitation, water table, and soil moisture data from a monitoring site located in east central Indiana to investigate the event hydrology of 22 drainage events in free and managed subsurface drainage systems. Relationships between event drainage volume, drain flow hydrograph metrics, column soil moisture, water table depth, and precipitation characteristics were explored …


Catalysts For Portable, Solid State Hydrogen Genration Systems, Jason Robert Gabl Jul 2014

Catalysts For Portable, Solid State Hydrogen Genration Systems, Jason Robert Gabl

Open Access Theses

Hydrogen and air powered proton exchange membrane fuel cells are a potential alternative to batteries. In portable power systems, the design requirements often focus on cost efficiency, energy density, storability, as well as safety. Ammonia borane (AB), a chemical hydride containing 19.6 wt. % hydrogen, has a high hydrogen capacity and is a stable and non-toxic candidate for storing hydrogen in portable systems.

Throughout this work, Department of Energy guidelines for low power portable hydrogen power systems were used as a baseline and comparison with commercially available systems. In order to make this comparison, the system parameters of a system …


Physical And Chemical Attributes Of A Genetically Modified Fruit Pectin, Carl Patrick Littrell Jul 2014

Physical And Chemical Attributes Of A Genetically Modified Fruit Pectin, Carl Patrick Littrell

Open Access Theses

Pectin is an important polymer used in the food industry as a thickening and gelling agent. Though pectin is ubiquitous in plants, chemical and structural differences among pectin molecules prevent most from being viable for industrial use. Enzymes found naturally in fruit cell walls during the ripening process impair many desirable attributes of fruit pectins, rendering them unsuitable for industrial applications. Pectin methylesterase (PME) is one such enzyme whose expression can be altered during ripening through the use of recombinant genetic engineering. Reduction in levels of PME results in increased degree of methylation and molecular size of pectin, greatly increasing …


Study Of A Generalized Empirical Model For Predicting Pressure Drop For Internal Flows, Tejas Anup Pant Jul 2014

Study Of A Generalized Empirical Model For Predicting Pressure Drop For Internal Flows, Tejas Anup Pant

Open Access Theses

A generalized empirical model for estimating the pressure drop across a channel for a given massflow rate is studied through computational fluid dynamics (CFD) simulations. It is observed that for developing laminar and turbulent flow through channels and pipes of arbitrary cross-section, the variation in the pressure drop between any two points in the flow direction with massflow rate can be well approximated by a second degree expression in massflow rate which is referred to as the empirical model in this study. In the first part of this study, a correlation between the pressure gradient and the massflow rate is …


Experimental Study Of Unsteady Heat Release In An Unstable Single Element Lean Direct Injection (Ldi) Gas Turbine Combustor, Varun S. Lakshmanan Jul 2014

Experimental Study Of Unsteady Heat Release In An Unstable Single Element Lean Direct Injection (Ldi) Gas Turbine Combustor, Varun S. Lakshmanan

Open Access Theses

In an effort to curb emissions from gas turbine engines, many low emission engine concepts have been developed. Among the most promising of these is the LDI (Lean Direct Injection). These systems operate at relatively low equivalence ratios close to blowout and are prone to instabilities. Combustion instabilities can reduce the life of the combustor by causing large pressure fluctuations and enhanced heat release to the walls of the combustor and reduce the efficiency of the engines. The understanding of combustion instabilities is vital to the implementation of such systems. Combustion instabilities are studied in an self-excited single element gas …


Preparation & Characterization Of High Purity Cu2 Znsn(Sxse1-X)4 Nanoparticles, Bethlehem G. Negash Jul 2014

Preparation & Characterization Of High Purity Cu2 Znsn(Sxse1-X)4 Nanoparticles, Bethlehem G. Negash

Open Access Theses

Research in thin film solar cells applies novel techniques to synthesize cost effective and highly efficient absorber materials in order to generate electricity directly from solar energy. Of these materials, copper zinc tin sulfoselenide (Cu2ZnSn(SxSe1-x) 4) nanoparticles have shown great promise in solar cell applications due to optimal material properties as well as low cost & relative abundance of materials.1,2 Sulfoselenide nanoparticles have also a broader impact in other industries including electronics3, LED 4, and biomedical research5. Of the many routes of manufacturing these class of semiconductors, …


Optical Position Sensing In Free Space Optical Communication, Muhammad Salman Bashir Jul 2014

Optical Position Sensing In Free Space Optical Communication, Muhammad Salman Bashir

Open Access Theses

In this thesis the performance of three estimators, (center of gravity, template matching and maximum likelihood (MLE)) to estimate the center of the beam on a photoemissive receiver array in a Free Space Optics (FSO) system, is compared in terms of mean square error. Simulations have been conducted in Matlab by generating a two dimensional nonhomogeneous Poisson process, and, mean square error is computed for three estimators. The cases of continuous and discrete arrays are also considered for various levels of signal-to-noise (SNR) ratio. Simulations have shown that the MLE gives the least mean squared error and especially performs significantly …


A Novel Microgrid Demand-Side Management System For Manufacturing Facilities, Terance Jerome Harper Jul 2014

A Novel Microgrid Demand-Side Management System For Manufacturing Facilities, Terance Jerome Harper

Open Access Theses

Thirty-one percent of annual energy consumption in the United States occurs within the industrial sector, where manufacturing processes account for the largest amount of energy consumption and carbon emissions. For this reason, energy efficiency in manufacturing facilities is increasingly important for reducing operating costs and improving profits. Using microgrids to generate local sustainable power should reduce energy consumption from the main utility grid along with energy costs and carbon emissions. Also, microgrids have the potential to serve as reliable energy generators in international locations where the utility grid is often unstable.

For this research, a manufacturing process that had approximately …