Engineering Commons^™

Methodology For Generating Simplified Cross Section Data Sets For Neutron Transport Calculations, Thomas Jay Harrison

Doctoral Dissertations

Neutron shielding problems involve radiation transport calculations over a wide range of energies. Fission neutrons have initial energy on the order of MeV, fusion neutrons have initial energy on the order of 10s of MeV, and space-origin neutrons have initial energy on the order of 100s of MeV or higher. Shielding calculations must track the neutrons from their initial energies until they are no longer of interest; for deep-penetration neutrons, this final energy can be on the order of eV before the neutron is no longer tracked. Thus, for deep-penetration space radiation shielding problems, the calculation may require tracking the …

Interface And Morphology Engineering In Solution-Processed Electronic And Optoelectronic Devices, Sanjib Das

Doctoral Dissertations

The first part of this dissertation focuses on interface and morphology engineering in polymer- and small molecule-based organic solar cells. High-performance devices were fabricated, and the device performance was correlated with nanoscale structures using various electrical, spectroscopic and microscopic characterization techniques, providing guidelines for high-efficiency cell design.

The second part focuses on perovskite solar cells (PSCs), an emerging photovoltaic technology with skyrocketing rise in power conversion efficiency (PCE) and currently showing comparable PCEs with those of existing thin film photovoltaic technologies such as CIGS and CdTe. Fabrication of large-area PSCs without compromising reproducibility and device PCE requires formation of dense, …

Solution And Surface Properties Of Architecturally- And Compositionally-Complex Block Copolymers And Their Binary Mixtures, Jesse Lawrence Davis

Doctoral Dissertations

The spontaneous generation of complex structures from polymeric building blocks provides a simple yet effective route to create useful soft matter structures having potential application in a variety of nanotechnologies. The topology, chemical structure, block composition, and sequence of the constituent building blocks of polymers are tunable through synthetic chemistry. This tunability offers attractive opportunities to generate complex, yet well-defined structures with control over the geometry, packing symmetry, and microdomain structure. This thesis work involves the study of the self-assembly behaviors of architecturally complex amphiphilic block copolymers (ABCs). ABCs are composed of two or more chemically distinct blocks that are …

Computational Simulation Of Mass Transport And Energy Transfer In The Microbial Fuel Cell System, Shiqi Ou

Doctoral Dissertations

This doctoral dissertation introduces the research in the computational modeling and simulation for the microbial fuel cell (MFC) system which is a bio-electrochemical system that drives a current by using bacteria and mimicking bacterial interactions found in nature. The numerical methods, research approaches and simulation comparison with the experiments in the microbial fuel cells are described; the analysis and evaluation for the model methods and results that I have achieved are presented in this dissertation.

The development of the renewable energy has been a hot topic, and scientists have been focusing on the microbial fuel cell, which is an environmentally-friendly …

Neuron Clustering For Mitigating Catastrophic Forgetting In Supervised And Reinforcement Learning, Benjamin Frederick Goodrich

Doctoral Dissertations

Neural networks have had many great successes in recent years, particularly with the advent of deep learning and many novel training techniques. One issue that has affected neural networks and prevented them from performing well in more realistic online environments is that of catastrophic forgetting. Catastrophic forgetting affects supervised learning systems when input samples are temporally correlated or are non-stationary. However, most real-world problems are non-stationary in nature, resulting in prolonged periods of time separating inputs drawn from different regions of the input space.

Reinforcement learning represents a worst-case scenario when it comes to precipitating catastrophic forgetting in neural networks. …

Novel Thermoplastic Elastomers Based On Benzofulvene: Synthesis And Mechanical Properties, Weiyu Wang

Doctoral Dissertations

Thermoplastic elastomers (TPEs) are of great importance both academically and technologically. Currently TPEs are the predominated form of styrene-diene copolymers. However, these styrenic TPEs have serious limitations in applications, especially at higher temperature, because of their low upper service temperature (UST). The work described in this dissertation aimed to developing thermoplastic elastomers with a higher UST and lower cost.

In order to develop TPEs with a higher UST, we employed benzofulvene, an anionically polymerizable monomer in hydrocarbon solvent at room temperature, as the glassy block and copolymerized it with isoprene to prepare polybenzofulvene-polyisoprene-polybenzofulvene (FIF) triblock copolymers. Among all triblock copolymers …

Rapid Dissolution For Destructive Assay Of Nuclear Melt Glass, Jonathan Allen Gill

Masters Theses

This study evaluates four methods for dissolving complex glassy debris resulting from nuclear detonations. The samples of interest simulate the glassy debris generated from a nuclear detonation’s fireball coming in contact with solid masses. Each method attempts to achieve dissolution through different approaches involving either acid digestion, alkaline digestion, or molten salt fusion. Two of the four methods were modified to retain all elements of the debris or surrogate debris. This retention is critical to the proportional relationships used in identifying fuel types and designs of nuclear weapons. Analysis is conducted with an inductively coupled time of flight mass spectrometer …

Versatile Three-Phase Power Electronics Converter Based Real-Time Load Emulators, Jing Wang

Doctoral Dissertations

This dissertation includes the methodology, implementation, validation, as well as real-time modeling of a load emulator for a reconfigurable grid emulation platform of hardware test-bed (HTB). This test-bed was proposed by Center of Ultra-wide-area Resilient Electric Energy Transmission Network (CURENT) at the University of Tennessee, at Knoxville in 2011, to address the transmission level system challenges posed by contemporary fast changing energy technologies.

Detailed HTB introduction, including design concept, fundamental units and hardware construction, is elaborated. In the development, current controlled three-phase power electronics converter based emulator unit is adopted to create desired power system loading conditions.

In the application, …

Measurements Of Methyl Radicals And Temperatures By Using Coherent Microwave Rayleigh Scattering From Resonance Enhanced Multiphoton Ionization, Yue Wu

Doctoral Dissertations

This thesis includes two main parts: (I) The CH₃[methyl radical] detection in methane/air flames and (II) the rotational temperature measurement of O₂[molecular oxygen] in a variety of environments by using coherent microwave Rayleigh scattering from resonance enhanced multiphoton ionization (Radar REMPI).

In first the part, from Chapter I to Chapter III, the methyl radical detection and quantitative measurements have been conducted in hydrocarbon flame with one-dimensional and two-dimensional spatial-resolved concentration distribution. Due to the proximity of the argon resonance state (4+1 REMPI by 332.5 nm) with the CH₃ state (2+1 REMPI by 333.6 nm), in …

Developing An Optimal Model For Infant Home Visitation, Isaac Atuahene

Doctoral Dissertations

The United States, Great Britain, Denmark, Canada and many other countries have accepted home visitation (HV) as a promising strategy for interventions for infants after births and for their mothers. Prior HV studies have focused on theoretical foundations, evaluations of programs, cost/benefit analysis and cost estimation by using hospital/payer/insurance data to prove its effectiveness and high cost. As governments and private organizations continue to fund HVs, it is an opportune time to develop and formulate operations research (OR) models of HV coverage, quality and cost so they might be used in program implementation as done for adult home healthcare (HHC) …

Crystal Growth And Physical Property Characterization Of Complex Perovskite Oxides, Ling Li

Doctoral Dissertations

Bulk EuTiO₃ [europium titanate], a quantum paraelectric antiferromagnet, is shown to exhibit multiferroic behavior in strained thin film form, which highlights the spin-phonon coupling in this system. We have investigated the structural, elastic, magnetic, thermal and transport properties of single crystals of EuTiO₃ as well as doped system EuTi_1-xB_xO₃ (B = Zr, Nb) [Zr and Nb doped europium titanate] utilizing various experimental techniques and theoretical calculations.

The cubic to tetragonal structural transition in pure EuTiO₃ is characterized by a pronounced step-like softening of the elastic moduli near 288 K [kelvin], which resembles …

Nanoscaled Cellulose And Its Carbonaceous Material: Application And Local Structure Investigation, Yujie Meng

Doctoral Dissertations

In this dissertation, cellulose nanocrystals three-dimensional morphology, size distribution, and the crystal structure were statistically and quantitatively investigated. Lognormal distribution was identified as the most likely for cellulose nanocrystals’ size distribution. Height and width dimensions were shown to decrease toward the ends from the midpoint of individual CNCs, implying a spindle-like shape. XRD analysis of crystallite size accompanied with TEM and AFM measurements revealed that the cross-sectional dimensions of individual switchgrass CNC were either rectangular or elliptical shape, with an approximately 3~5 nm [nanometer] lateral element length range. A sponge-like carbon aerogel from microfibril cellulose with high porosity, ultra-low density, …

Vapor Synthesis And Thermal Evolution Of Supportless, Metal Nanotubes And Application As Electrocatalysts, Robert William Atkinson

Doctoral Dissertations

One of the major limitations of proton exchange membrane fuel cells (PEMFCs) is the high cost and poor durability of the currently preferred catalyst design, small Pt nanoparticles supported on high surface area carbon (Pt/C). Unsupported, high-aspect ratio nanostructured catalysts, or extended surface catalysts, are a promising paradigm as electrocatalysts for a number of electrochemical reactions. These extended surface catalysts generally exhibit higher specific activities compared to their carbon-supported nanoparticle counterparts that have been ascribed to their unique electronic, surface and structural properties. Extended surface catalysts frequently maintain enhanced durability over supported catalysts during fuel cell operation because they are …

Modelling Supercomputer Maintenance Interrupts: Maintenance Policy Recommendations, Jagadish Cherukuri

Masters Theses

A supercomputer is a repairable system with large number of compute nodes interconnected to work in harmony to achieve superior computational performance. Reliability of such a complex system depends on an effective maintenance strategy that involves both emergency and preventive maintenance. This thesis analyzes the maintenance records of four supercomputers operational at The National Institute of Computational Science located at Oak Ridge National Laboratory. We propose to use the generalized proportional intensities model (GPIM) to model the maintenance interrupts as it can capture both the reliability parameters and maintenance parameters and allows the inclusion of both emergency and preventive maintenance. …

Biodegradable Nano-Hybrid Polymer Composite Networks For Regulating Cellular Behavior, Charles Henley Sprague

Masters Theses

Photo-crosslinkable polymeric biomaterials have emerged in the field of biomedical research to promote tissue regeneration. For example, scaffolds that can be crosslinked and hardened in situ have been known to make suitable implant alternatives. Since injectable and photo-crosslinkable biomaterials offer the advantage of being minimally invasive, they have emerged to compete with autografts, a current highly invasive method to repair diseased tissue. A series of novel photo-crosslinkable, injectable, and biodegradable nano-hybrid polymers consisting of poly(ε-caprolactone fumarate) (PCLF) and polyhedral oligomeric silsesquioxane (POSS) has been synthesized in our laboratory via polycondensation. To engineer the material properties of the nano-hybrid networks, varied …

Oxygen Reduction Reaction By Copper Complex Based Electrocatalysts, Congling Zhang

Doctoral Dissertations

My research focuses on catalysis of oxygen reduction reaction (ORR) by a series of Cu(II) [copper with positive two valence] -1,2,4-triazole complex-based electrocatalysts at the cathode of PEMFC (polymer electrolyte membrane fuel cell), an efficient and environmental friendly energy conversion system compared to internal combustion engines in use today. The sluggish kinetics of ORR considerably limited the performance of PEMFCs. Understanding of ORR mechanism is important for developing affordable, active and durable ORR catalysts for such devices.

The first part of my work focused on improving the ORR performance of Cu(II)-1,2,4-triazole complex-based catalysts in an acidic environment by exploring synthesis …

Computational Framework For Small Animal Spect Imaging: Simulation And Reconstruction, Sang Hyeb Lee

Doctoral Dissertations

Small animal Single Photon Emission Computed Tomography (SPECT) has been an invaluable asset in biomedical science since this non-invasive imaging technique allows the longitudinal studies of animal models of human diseases. However, the image degradation caused by non-stationary collimator-detector response and single photon emitting nature of SPECT makes it difficult to provide a quantitative measure of 3D radio-pharmaceutical distribution inside the patient. Moreover, this problem exacerbates when an intra-peritoneal X-ray contrast agent is injected into a mouse for low-energy radiotracers.

In this dissertation, we design and develop a complete computational framework for the entire SPECT scan procedure from the radio-pharmaceutical …

Studies Of Strongly Correlated Electron Systems Using Neutron Scattering, Yuen Yiu

Doctoral Dissertations

The world presents many natural and man-made crises and challenges that require scientific solutions. Condensed matter physics is one of the most influential and solution oriented disciplines in science. The field saw a significant rise in popularity especially during the past century as mankind enters the Information Age, when energy and computing related technologies become ubiquitous. This technological progress has been driven by efforts from scientists and engineers, through the synthesis, understanding, and implementation of new materials. Condensed matter physicists strive to solve puzzles at the frontier of material research. In the 21st century we have many advance tools at …

Development And Demonstration Of Critical Components Of Aluminum Based Energy Storage Devices Using The Chloroaluminate Ionic Liquids, Mengqi Zhang

Doctoral Dissertations

This dissertation considers the development of porous carbon materials as the substrates for Al deposition/dissolution in an Al based ionic liquid flow battery (ILFB) and demonstration of an Al based hybrid supercapacitor. The Aluminum chloride/ 1-ethyl-3-methylimidazolium chloride chloroaluminate ionic liquid is utilized as the electrolyte for these Al based energy storage devices. The ILFB has less capital cost than the all-vanadium redox flow battery because of the inexpensive AlCl₃. The feasibility to equip a tank of solid aluminum chloride in an ILFB system aiming to improve energy density is investigated. A critical range of temperature data (50-130 celsius …

Energy Selective Neutron Imaging For The Characterization Of Polycrystalline Materials, Robin Woracek

Doctoral Dissertations

This multipart dissertation focuses on the development and evaluation of advanced methods for material testing and characterization using neutron diffraction and imaging techniques. A major focus is on exploiting diffraction contrast in energy selective neutron imaging (often referred to as Bragg edge imaging) for strain and phase mapping of crystalline materials. The dissertation also evaluates the use of neutron diffraction to study the effect of multi-axial loading, in particular the role of applying directly shear strains from the application of torsion. A portable tension-torsion-tomography loading system has been developed for in-situ measurements and integrated at major user facilities around the …

Phase Dynamics Of Locset Control Methodology, Brendan Neschke

Masters Theses

Single-mode fiber amplifiers produce diffraction-limited beams very efficiently. Maximum beam intensity requires that an array of these amplifiers have their beams coherently combined at the target. Optical path differences and noise adversely affect beam quality. An existing closed loop phase control methodology, called the locking of optical coherence by single-detector electronic-frequency tagging (LOCSET), corrects phase errors in real time by electronically detecting path length differences and sending signals to lithium niobate phase adjusters. Broadening the line-width using “jitter” of the input signal can increase the output power of an individual amplifier by suppressing nonlinearity. The system dynamics of LOCSET are …

Cpas - Campus Parking Availability System, Jacob Lambert

Chancellor’s Honors Program Projects

No abstract provided.