Engineering Commons^™

Handitrike - Recumbent Tricycle, Sean Higginson, Kevin Howie, Vinay Patel

Mechanical Engineering

This report covers the design and construction of the recumbent racing tricycle for Mr. Robert T. Kelly, a disabled veteran. Unfortunately Rob’s right leg is five inches shorter than his left one and therefore is unable to properly operate standard cranks. Our team HandiTrike is composed of Sean Higginson, Kevin Howie, and Vinay Patel and our project requires us to come up with a design that is feasible to complete within the given three quarters, as well as allow Rob to gain full use of his tricycle. Currently Rob ‘s trike uses the standard crank set up found on most …

Formula Sae Turbocharger Engine Development, Eric Griess, Kevin Mccutcheon, Matthew Roberts, William Chan

Mechanical Engineering

This project, Formula SAE Turbocharger System Development, was sponsored by the Cal Poly, San Luis Obispo Formula SAE team. The team proposed this project in order to have a powerful yet lightweight engine so they can be extremely competitive at their competition. The baseline output of the single cylinder 450cc engine (2006 Yamaha WR450F) was 46 horsepower and 27 ft-lb of torque. The goal of this project was to increase the output of that engine to 60 horsepower and 35 ft-lb through the use of a turbocharger.

Thermocouple Calibration Device, Angelica M. Larios, Cameron D. Peck, Andrew J. Smith

Mechanical Engineering

The goal of this project is to develop a thermocouple calibration unit with a high degree of confidence and accuracy. This thermocouple calibration device will be designed and developed at Cal Poly San Luis Obispo and delivered to Tesla Motors Inc.

To best utilize thermocouples, they must be calibrated to a known accuracy. Non-commercially produced thermocouples have unknown accuracies. The final deliverable will be a semi-automated device that produces a calibration curve for each thermocouple with a known confidence and accuracy.

Formula Hybrid Drivetrain Design, Zachary (Zak) Mcfarland, Alex Pruitt, William Domhart

Mechanical Engineering

The Formula Hybrid senior project group was tasked with designing and building a drivetrain system for the Cal Poly Society of Automotive Engineers (SAE) Formula Hybrid (FHSAE) team. FHSAE gave customer requirements for performance and geometry for the drivetrain and the FHSAE rulebook has guidelines regarding safety requirements. The team chose to compete in the electric category of the 2012 FHSAE competition. After getting feedback from previous car performance and researching different powertrain options, the senior project team arrived at three conceptual ideas. Using a quality function deployment method, the senior project team chose the concept where two motors independently …

Innovative Cargo Rack Solutions, Travis Mccart, Brian Blummer, Whit Ratcliff

Mechanical Engineering

This report describes the process of designing, building, and testing a lowering mechanism for a roof-mounted SUV cargo box. It provides a detailed problem description and a specific list of requirements that our design must comply with. Existing products and concepts are presented which meet one or more of our design requirements. Six design concepts are discussed and down-selected to three for further development. A final design has been chosen and described in detail. A team management plan is included to specify member responsibilities and a schedule details major deadlines and goals. Manufacturing processes and testing procedures are described in …

Throwing Frame For Athletes With Dissabilities, Andrew Higgins, Stefan Owechko, Gabriel (Gabe) Terrasas, Kevin Crisfield

Mechanical Engineering

Team Zeus’ senior project was to design, build and test a working throwing frame system for Bridge II Sports, a nonprofit organization in North Carolina. The throwing frame is used to allow athletes and individuals with disabilities to throw shot-put, discus, and javelin using a frame to sit against. Team Zeus was specifically tasked to build a frame that is lighter weight and more transportable than products that are currently on the market. This frame also is adjustable to accommodate a wide range of athlete weights, sizes, and abilities. The final result is a 35lb aluminum frame with two different …

Robotic Fingerspelling Hand For Deaf-Blind Communication, Brian Fang, Colby Dixon, Trevor Wong

Mechanical Engineering

Robotic fingerspelling hand for the deaf-blind. The hand forms the shapes of the American Manual Alphabet with 11 servos. The project was sponsored by The Smith-Kettlewell Eye Reaserch Institute.

Aerodynamic Test Platform For Human Powered Vehicle (Hpv), Spencer Wangerin, Spencer Lillywhite, Colburn Davis

Mechanical Engineering

The Aerodynamic Test Platform (ATP) for the Cal Poly HPV Club is a system that was designed by Cal Poly mechanical engineering students to measure aerodynamic characteristics of a human-powered vehicle (HPV). The HPV team desired a system that could quantify the lift, drag, and other aerodynamic qualities of a full scale HPV at various orientations in oncoming airflow. Established methods for determining aerodynamic characteristics include computational fluid dynamics (CFD) and wind tunnel testing of scaled models. The ATP was devised to simulate the test results given by a full-scale wind tunnel without requiring a wind tunnel large enough to …

Supermileage Chassis Dynamometer, Jose Garcia, Steve Janning, Timothy Lui, Kyla Purvis

Mechanical Engineering

This report describes the final design and analysis of a hydraulic chassis dynamometer as a testing tool for California Polytechnic State University, San Luis Obispo Supermileage Vehicle Team (CPSMV). Literature review was conducted to understand the various types of chassis dynamometers on the market as of the year 2011. After rigorous research, it was determined that a hydraulic system was the best system for a chassis dynamometer in terms of functionality, performance, and cost. Critical study of hydraulics, dynamometers, and data acquisition systems (DAQ) was followed by a complete design of a hydraulic system. The chassis dynamometer proposed in this …

Main Reduction Gear Debris Identification And Removal Device, Gordon Cline, Alex Tittiger, Michael O'Brien

Mechanical Engineering

This report details the development of a tool to remove objects and debris from a large gearbox found on ships of the United States Navy, specifically to be used by NAVSEA. The tool is to be used in situations where an object or contaminant cannot easily be removed or found without completely disassembling the gearbox. This will be done using a boom arm, a cable, a gripper and a borescope. This combination will allow for a large amount of mobility and versatility when searching for the object or contaminant, which is necessary for use in different gearboxes. The process we …

Mini Pump, Stephen Scruggs, Britta Berg-Johansen, Kyle Kriete

Mechanical Engineering

No abstract provided.

Design Of A Releasable Snowboard Binding, Rex Crossen, Brian Kruse, Timothy Scott

Mechanical Engineering

A releasable snowboard binding will be proposed to our sponsor. This binding will allow the user to release and engage on demand for aerial tricks, comfort, and increased safety. The releasable snowboard binding we will come up with will be revolutionary within the snowboard industry and make current bindings old and inferior.